New approaches towards the synthesis and characterization of alkoxy substituted spirobifluorenes and spirosilabifluorenes for organic optoelectronics

Alkoxy substituted spirobifluorene derivatives namely 2,2′,7,7′-tetrabromo-3,6-bis(methoxy)-9,9′spirobifluorene (MSBF), 2,2′,7,7′-tetrabromo-3,6-bis(ethoxy)-9,9′spirobifluorene (ESBF), 2,2′,7,7′-tetrabromo-3,6-bis(butoxy)-9,9′spirobifluorene (BSBF), 2,2′,7,7′-tetrabromo-3,3′,6,6′-tetra(methoxy)-9,9′-spiro-9-silabifluorene (MSSiBF) and their key intermediates have been synthesised successfully. All compounds have been fully characterised by ¹H and ¹³C NMR, FTIR, UV-visible spectroscopy, MS spectrometry. TGA analysis revealed good thermal stability. The systematic investigation on the solubility, thermostability and photophysical property of synthesized compound showed that alkoxy substituted spirobifluorene were unique in rigidity and have wide range of applications in molecular electronics and can be used as building units for optoelectronics material.     

Density matrix analysis, simulation, and measurements of electronic absorption and fluorescence spectra of spirobifluorenes

The linear absorption and fluorescence spectra as well as the oscillator strengths of 2,2',7,7'-tetraphenyl-9,9'-spirobifluorene (A), 2,2',7,7'-tetrakis(biphenyl-4-yl)-9,9'-spirobifluorene (B), and 2,2',7,7'-tetrakis(9,9'-spirobifluoren-2-yl)-9,9'-spirobifluorene (C) are calculated on the basis of the collective electronic oscillator (CEO) approach of Mukamel et al. (see, e.g., Chem. Rev. 2002, 102, 3171). The graphical visualization and quantitative characterization of CEO modes allows one to extract the real-space distribution of electronic excitations of the molecules under study. Effects of the lengthening and branching of the oligophenylene segments have been analyzed. The influence of the lowest excited (S1) vs ground-state (S0) geometry changes on the CEO modes is investigated and related to the geometry changes of the molecular parts. The obtained theoretical results are in good agreement with experimental trends observed in absorption and fluorescence data.     

Bidirectional racemic synthesis of the biologically active quinone cardinalin 3

Readily available 2,2',6,6'-tetramethoxy-1,1'-biphenyl was transformed in 14 synthetic steps into the natural product cardinalin 3 using a bidirectional approach. One of the key steps was the formation of the cis-1,3-dimethylnaphtho[2,3-c]pyran ring. (+/-)-1,1'-[6,6'-Diallyl-5,5'-bis(benzyloxy)-1,1',3,3'-tetramethoxy-2,2'-binaphthalene-7,7'-diyl]diethanol was treated with O(2) in the presence of CuCl(2) and catalytic PdCl(2) to afford 5,5'-bis(benzyloxy)-7,7',9,9'-tetramethoxy-1,1',3,3'-tetramethyl-1H,1'H-8,8'-bibenzo[g]isochromene. Hydrogenation of this compound afforded 7,7',9,9'-tetramethoxy-cis-1,3-cis-1',3'-tetramethyl-3,3',4,4'-tetrahydro-1H,1'H-8,8'-bibenzo[g]isochromene-5,5'-diol in quantitative yield, which was converted in 3 steps to cardinalin 3.     

Molecular tectonics. Porous hydrogen-bonded networks built from derivatives of 9,9'-spirobifluorene

Molecules with multiple sites that induce strong directional association tend to form open networks with significant volumes available for the inclusion of guests. Such molecules can be conveniently synthesized by grafting diverse sticky sites onto geometrically suitable cores. The characteristic inability of 9,9'-spirobifluorene to form close-packed crystals suggests that it should serve as a particularly effective core for the elaboration of molecules designed to form highly porous networks. To test this hypothesis, various new tetrasubstituted 9,9'-spirobifluorenes with hydrogen-bonding sites at the 3,3',6,6'-positions or 2,2',7,7'-positions were synthesized by multistep routes. Four of these compounds were crystallized, and their structures were determined by X-ray crystallography. In all cases, the compounds form extensively hydrogen-bonded networks with high porosity. In particular, 43% of the volume of crystals of 3,3',6,6'-tetrahydroxy-9,9'-spirobifluorene (28) is available for the inclusion of guests, whereas the porosity is only 28% in crystals of tetrakis(4-hydroxyphenyl)methane, a close model that lacks the spirobifluorene core. Similarly, the porosities found in crystals of 2,2',7,7'-tetra(acetamido)-9,9'-spirobifluorene (33) and 2,2',7,7'-tetrasubstituted tetrakis(diaminotriazine) 39 are 33% and 60%, respectively. Moreover, the porosity of crystals of 2,2',7,7'-tetrasubstituted tetrakis(triaminotriazine) 40 is 75%, the highest value yet observed in crystals built from small molecules. These observations demonstrate that a particularly effective strategy for engineering molecules able to form highly porous networks is to graft multiple sticky sites onto spirobifluorenes or other cores intrinsically resistant to close packing.     

Enzymatic resolution of 7,7'-dihydroxy-8,8'- biquinolyl dipentanoate and its conversion to 2,2'-di-tert-butyl-7,7'-dihydroxy-8,8'-biquinolyl

Incubation of (+/-)-7,7'-di(pentanoyloxy)-8,8'-biquinolyl (4) with a crude cholesterol esterase preparation (from bovine pancreas) yielded highly enantioenriched unreacted dextrorotatory material, (+)-(aR)-4 (46%, > or = 99% ee), accompanied by the expected diol product, (-)-(aS)-7,7'-dihydroxy-8,8'-biquinolyl (1), in modest enantiomeric excess (> or =37%, > or =77% ee). Treatment of scalemic diesters 4 with t-BuLi, followed by saponification in the presence of air, gave 2,2'-di-tert-butyl-7,7'-dihydroxy-8,8'-biquinolyl (2) in enantio enriched form. Biquinolyl 2 is less configurationally stable than 1, racemizing rapidly in CHCl3 (t1/2(rac) = 1.9 h, rt), and with a moderate rate in MeOH (t1/2(rac) = 30.5 h, rt).     

Efficient greenish blue electrochemiluminescence from fluorene and spirobifluorene derivatives

The spectroscopic and electrochemical behavior as well as electrogenerated chemiluminescence (ECL) of a series of donor-π-donor derivatives bearing triphenylamine groups as donor connected to a fluorene, 2,7-bis-(4-(N,N-diphenylamino)phen-1-yl)-9,9'-dimethylfluorene (1), or spirobifluorene core, 2,7-bis-(4-(N,N-diphenylamino)phen-1-yl)-9,9'-spirobifluorene (2) and 2,2',7,7'-tetrakis(4-(N,N-diphenylamino)phen-1-yl)-9,9'-spirobifluorene (3), were investigated. Besides a high photoluminescence (PL) quantum yield in solution (between 81 and 87%), an efficient radical ions annihilation process induces intense greenish blue ECL emission that could be seen with the naked eye. Only the tetrasubstituted spirobifluorene derivative (compound 3) shows weak ECL obtained by a direct annihilation mechanism. Because the energy of the annihilation reaction is higher than the energy required to form the singlet excited state, the S-route could be considered the pathway followed by the ECL process in these molecules. The ECL emissions recorded by direct ion-ion annihilation show two bands compared to the single structureless PL band. The ECL spectra obtained by a coreactant approach using benzoylperoxide as a coreagent show no differences relative to that produced by annihilation, except for an increasing of ECL intensity for all compounds.     

光诱导有机化合物异构化反应的研究——Ⅹ. 吲哚啉螺吡喃瞬态吸收光谱的研究

研究了1-正-辛基-3,3-二甲基-吲哚啉-2,2′-螺-5′,6′-(2-溴-4-硝基-苯并)吡喃, 1-正-辛基-3,3-二甲基-吲哚啉-2,2′-螺-5′,6′-(4-硝基-苯并)吡喃, 1-正-辛基-3,3-二甲基-吲哚啉-2,2′-螺-5′,6′-(2,4-二硝基-苯并)吡喃及1-正-辛基-3,3-二甲基-吲哚啉-2,2′螺-5′6′-(2-氯-4-硝基-苯并)吡喃在环已烷和甲苯溶液中光致开环过程的瞬态吸收光谱。观察到具有较长寿命的中间体及聚集体的存在。初步提出异构化反应过程的机制中既包含有三重态过程, 也有单重态参与。     

Theoretical study of the transfer integral and density of states in spiro-linked triphenylamine derivatives

We present a method for calculating the parameters that control hopping transport in disordered molecular solids, i.e., the transfer integrals and the distribution of transport site energies. Average values of these parameters are obtained by performing quantum-chemical calculations on a large ensemble of bimolecular complexes in random relative orientations. The method is applied to triphenylamine (TPA) and three differently substituted spiro-linked phenylamine compounds, 2,2',7,7'-tetrakis-(N,N-di-4-methoxyphenylamino)-9,9'-spirobifluorene (spiro-MeOTAD), 2,2'7,7'-tetrakis-(N,N-diphenylhenylamino)-9,9'-spirobifluorene (spiro-TAD), and 2,2',7,7'-tetrakis-(N,N-di-m-methylphenylamino)-9,9'-spirobifluorene (spiro-m-TTB). In the case of TPA, the dependence of the root-mean-square hole transfer integral J on intermolecular separation r for the ensemble of relative orientations is compared with that obtained by performing the same calculations for a fixed, approximately cofacial, orientation of the two TPA molecules. The calculation for the disordered geometry predicts a larger localization radius r0, where J approximately exp(-r/r0), than the calculation for the fixed orientation and is in better agreement with experiment. In the case of the spiro-linked compounds, results from our method are compared with parameters extracted from time-of-flight mobility measurements analyzed with the Gaussian disorder model (GDM). We find that the highest occupied molecular-orbital (HOMO) energies of the bimolecular complexes are distributed on an asymmetric peak, whose width varies in qualitative agreement with the value of the energetic disorder sigma obtained from experimental data using the GDM. The mean-square hole transfer integral varies in accordance with the experimentally determined value of the mobility prefactor micro0. The differences between the differently substituted compounds are interpreted in terms of differences in the spatial extent of the wave function. Spiro-MeOTAD was found to have a greater localization radius, which leads to both a larger transfer integral and a broader distribution of HOMO energies than either of the other compounds. For these compounds, differences in energetic disorder could not be explained in terms of differences in the permanent dipole moment. Our method is proposed as an approximate means of predicting the effect of chemical structure on the values of transport parameters in disordered molecular films.     

Blue emitting 3π-2spiro terfluorene-indenofluorene isomers: a structure-properties relationship study

Two novel terfluorenyl derivatives, 2,2',7,7'-tetrakis(9,9-dioctyl-9H-fluoren-2-yl)dispiro[fluorene-9,11'-indeno-(2,1-a)-fluorene-12',9'-fluorene] ((2,1-a)-DST-IF) and 2,2',7,7'-tetrakis(9,9-dioctyl-9H-fluoren-2-yl)dispiro- [fluorene-9,6'-indeno-(1,2-b)-fluorene-12',9'-fluorene] ((1,2-b)-DST-IF) have been synthesized by two different synthetic approaches. These terfluorenyl derivatives possess a different central indenofluorene core, namely (2,1-a)-indenofluorene or (1,2-b)-indenofluorene, which imposes two distinct geometry profiles, and different structural environments for the terfluorenyl fluorophores that translates into drastically different optical and electrochemical properties for (2,1-a)-DST-IF and (1,2-b)-DST-IF. These properties have been carefully studied through a combined experimental and theoretical approach. The (2,1-a)-DST-IF isomer has been successfully used as emitting layer in a blue single-layer small-molecule organic light-emitting diode (SMOLED) and appears as the first example of a blue emission arising from intramolecular terfluorenyl excimers. Regarding the importance of terfluorenyl derivatives in organic electronics, the present structure-properties relationship study, may open new avenues in the design of efficient blue fluorophores.     

Synthesis of a highly luminescent three-dimensional pyrene dye based on the spirobifluorene skeleton

We have synthesized a highly luminescent (log e > 5.0, F > 0.9) pyrene dye based on a spirobifluorene skeleton [2,2',7,7'-tetrakis(7-tert-butyl-1-pyrenyl)-9,9'-spirobi[9H-fluorene; 4-PySBF]. The use of spirobifluorene prevents fluorescence quenching by intramolecular energy transfer and/or electron transfer among the chromophores in the excited state. The emission spectra of 4-PySBF exhibited a red shift of 20 nm in comparison to a model compound [9,9'-dioctyl-2,7-bis(7-tert-butyl-1-pyrenyl)-9H-fluorene; 2-PyF], but its UV-Vis spectrum remained unchanged.     

2 ,2’,7,7’-四碘-9,9’-螺二芴的简便合成方法

2,2',7,7'-四碘-9,9'-螺二芴具有特殊的螺形结构,它是合成空穴导电材料OMeTAD和TAD及其它一些导电高分子的关键中间体.我们发展了一种条件温和简便的方法,高产率地合成了目标分子.     

A comparison of linear optical properties and redox properties in chalcogenopyrylium dyes bearing ortho-substituted aryl substituents and tert-butyl substituents

A series of thiapyrylium pentamethine dyes (4 and 12-15) bearing 2,2'-di-tert-butyl-6,6'-diphenyl, 2,2'-di-tert-butyl-6,6'-bis(2,6-dimethylphenyl), 2,2'-di-tert-butyl-6,6'-bis(2-methylphenyl), 2,2',6,6'-tetrakis(2,6-dimethylphenyl), and 2,2',6,6'-tetrakis(2-methylphenyl) substituents, respectively, were prepared and their linear optical properties and electrochemical redox properties were measured and compared to thiapyrylium pentamethine dyes 3 and 5. The tert-butyl and 2,6-dimethylphenyl substituents give nearly identical chromophores with respect to values of lambda(max), molar extinction coefficients (epsilon), bandwidths at half-height (nu(1/2)), and lack of absorption in the visible spectrum. The 2-methylphenyl substituent imparts linear optical properties that are intermediate between those of the tert-butyl and phenyl substituents. The 2,6-dimethylphenyl and 2-methylphenyl substituents impart greater oxidative stability based on anodic shifts in oxidation potential.     

Reaction of Methyl 1-(2-Bromoisobutyryl)cyclopentane-carboxylate and 3-(1-Bromocyclopentyl)-2,2-dimethyl-3-oxo-propionate with Zinc and Aromatic Aldehydes

Methyl 1-(2-bromoisobutyryl)cyclopentanecarboxylate and 3-(1-bromocyclopentyl)-2,2-dimethyl-3-oxopropionate react with zinc and aromatic aldehydes to afford 8-aryl-9,9-dimethyl-7-oxaspiro[4.5]decane-6,10-diones and 10-aryl-7,7-dimethyl-9-oxaspiro[4.5]decane-6,8-diones, respectively.     

A superfluorescent fluorenyl probe with efficient two-photon absorption

The linear photophysical, excited state absorption (ESA), superfluorescence, and two-photon absorption (2PA) properties of 4,4'-(1E,1'E)-2,2'-(7,7'(1E,1'E)2,2'(4,4'-sulfonylbis(4,1-phenylene))bis(ethane-2,1-diyl)bis(9,9-didecy-9H-fluorene7,2-diyl))bis(ethane-2,1-diyl)bis(N,N-diphenylaniline) (1) were investigated in organic and aqueous media with respect to its potential application in biological imaging. The analysis of linear photophysical properties revealed a rather complex nature of the main one-photon absorption band, strong solvatochromic effects in the steady-state fluorescence spectra, single-exponential fluorescence decay, and high fluorescence quantum yields in organic solvents (≈1.0). The ESA spectra of 1 suggested potential for light amplification in nonpolar media while efficient superfluorescence in cyclohexane was demonstrated. The degenerate 2PA spectra of 1 were obtained over a broad spectral range (640-900 nm), using a standard two-photon induced fluorescence method under 1 kHz femtosecond excitation. Two well defined 2PA bands with maximum 2PA cross sections up to 1700 GM in the higher energy, short wavelength band and ≈1200 GM in the lower energy, long wavelength band of 1 were shown. The potential use of 1 in bioimaging was demonstrated via one- and two-photon in vitro fluorescence imaging of HCT 116 cells.     

Blue and near-UV phosphorescence from iridium complexes with cyclometalated pyrazolyl or N-heterocyclic carbene ligands

Two approaches are reported to achieve efficient blue to near-UV emission from triscyclometalated iridium(III) materials related to the previously reported complex, fac-Ir(ppz)(3) (ppz = 1-phenylpyrazolyl-N,C(2)'). The first involves replacement of the phenyl group of the ppz ligand with a 9,9-dimethyl-2-fluorenyl group, i.e., fac-tris(1-[(9,9-dimethyl-2-fluorenyl)]pyrazolyl-N,C(2)')iridium(III), abbreviated as fac-Ir(flz)(3). Crystallographic analysis reveals that both fac-Ir(flz)(3) and fac-Ir(ppz)(3) have a similar coordination environment around the Ir center. The absorption and emission spectra of fac-Ir(flz)(3) are red shifted from those of fac-Ir(ppz)(3). The fac-Ir(flz)(3) complex gives blue photoluminescence (PL) with a high efficiency (lambda(max) = 480 nm, phi(PL) = 0.38) at room temperature. The lifetime and quantum efficiency were used to determine the radiative and nonradiative rates (1.0 x 10(4) and 2.0 x 10(4) s(-1), respectively). The second approach utilizes N-heterocyclic carbene (NHC) ligands to form triscyclometalated Ir complexes. Complexes with two different NHC ligands, i.e., iridium tris(1-phenyl-3-methylimidazolin-2-ylidene-C,C(2)'), abbreviated as Ir(pmi)(3), and iridium tris(1-phenyl-3-methylbenzimidazolin-2-ylidene-C,C(2)'), abbreviated as Ir(pmb)(3), were both isolated as facial and meridianal isomers. Comparison of the crystallographic structures of the fac- and mer-isomers of Ir(pmb)(3) with the corresponding Ir(ppz)(3) isomers indicates that the imidazolyl-carbene ligand has a stronger trans influence than pyrazolyl and, thus, imparts a greater ligand field strength. Both fac-Ir(pmi)(3) and fac-Ir(pmb)(3) complexes display strong metal-to-ligand-charge-transfer absorption transitions in the UV (lambda = 270-350 nm) and phosphoresce in the near-UV region (E(0)(-)(0) = 380 nm) at room temperature with phi(PL) values of 0.02 and 0.04, respectively. The radiative decay rates for fac-Ir(pmi)(3) and fac-Ir(pmb)(3) (5 x 10(4) s(-1) and 18 x 10(4) s(-1), respectively) are somewhat higher than that of fac-Ir(flz)(3), but the nonradiative rates are two orders of magnitude faster (i.e., (2-4) x 10(6) s(-1)).     

Structural identification of a novel axially chiral binaphthyl fluorene based salen ligand in solution using electronic circular dichroism: a theoretical-experimental analysis

A novel axially chiral binaphthyl fluorene based salen ligand, AFX-155 [2,2'-(1E,1'E)-(R)-1,1'-binaphthyl-2,2'-diylbis(azan-1-yl-1-ylidene)bis(methan-1-yl-1-ylidene)bis(4-((7-(diphenylamino)-9,9-dihexyl-9H-fluoren-2-l)ethynyl)phenol)], with potential applications in homogeneous catalysis, biophotonics, and sensing was synthesized. A full comparative theoretical-experimental analysis of the UV-vis and electronic circular dichroism (ECD) spectra of the 10 primary isomers, comprising stereoisomers and optical isomers, revealed the presence of the unique structure in tetrahydrofuran (THF) solution, the trans-R-intra//trans-R-extra. A proposed route of attack of the (R)-(+)-2,2'-diamino-1,1'-binapthalene onto a salicaldehyde 5-(2-(2-(diphenylamino)-9,9-dihexyl-9H-fluoren-7-yl)ethynyl)-2-hydroxybenzaldehyde followed by a consecutive attack of the resulting species onto another salicaldehyde, both via Burgi:Dunitz trajectory, validates the unambiguous formation of the established isomer. Steric hindrances seem to be the determinant factor that defines the 3D structural conformation of this particular stereoisomer of AFX-155 with triple axial chirality. The determination of every optimal structure and the dominant conformers of AFX-155 were calculated evaluating, in CONFLEX, their steric energies using force fields at MMFF94S (2006-11-24HGTEMP) level in gas phase. The geometry of the conformers was optimized in THF (using PCM) using Gaussian 09 at the DFT/B3LYP level of theory and 6-31G* basis set. The first 100 electronic excited states were calculated using the same level of theory and basis set.     

Fluorocarbon-modified organic semiconductors: molecular architecture, electronic, and crystal structure tuning of arene- versus fluoroarene-thiophene oligomer thin-film properties

We present here the systematic synthesis and comparative physicochemical characterization of a series of regiochemically varied and core size extension-modulated arene(perfluoroarene)-thiophene oligomers. The molecules investigated are: 5,5'-diphenyl-2,2':5',2':5',2'-quaterthiophene (1), 5,5'-bis[1-[4-(thien-2-yl)phenyl]]-2,2'-dithiophene (2), 4,4'-bis[5-(2,2'-dithiophenyl)]-biphenyl (3), 5,5'-diperfluorophenyl-2,2':5',2':5',2'-quaterthiophene (4), 5,5'-bis[1-[4-(thien-2-yl)perfluorophenyl]]-2,2'-dithiophene (5), 4,4'-bis[5-(2,2'-dithiophenyl)]-perfluorobiphenyl (6), 5,5'-diperfluorophenyl-2,2':5',2'-tertthiophene (7), 5,5'-diperfluorophenyl-2,2'-dihiophene (8), and 5,5-diperfluorophenylthiophene (9). Trends in optical absorption and emission parameters, molecular structures as defined by single-crystal X-ray diffraction, as well as electrochemical redox processes are described. The morphologies and microstructures of the vapor-deposited films grown over a range of growth temperatures have also been characterized. Field-effect transistor (FET) measurements demonstrate that all of these materials are FET-active and, depending on the molecular architecture, exhibit comparably good p- or n-type mobility when optimum film microstructural order is achieved. A very large n-channel mobility of approximately 0.5 cm2/Vs with I(on)/I(off) ratios > 10(8) is achieved for films of 4.     

Syntheses, structures, and electrochemical properties of platinum(II) complexes containing di-tert-butylbipyridine and crown ether annelated dithiolate ligands

A series of new platinum(II) complexes containing both 4,4'-di-tert-butyl-2,2'-bipyridine (dbbpy) and the extended tetrathiafulvalenedithiolate ligands have been prepared and characterized. These complexes include [Pt(dbbpy)(C8H4S8)] (1; C8H4S82- = 2-{(4,5-ethylenedithio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(ptdt)] (2; ptdt = 2-{(4,5-cyclopentodithio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(mtdt)] (3; mtdt = 2-{(4,5-methylethylenedithio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(btdt)] (4; btdt = benzotetrathiafulvalenedithiolate), [Pt(dbbpy)(C8H6S8)] (5; C8H6S82- = 2-{4,5-bis(methylthio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(3O-C6S8)] (6; 3O-C6S82- = 2-{4,5-dithia-(3',6',9'-trioxaundecyl)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), and [Pt(dbbpy)(4O-C6S8)] (7; 4O-C6S82- = 2-{4,5-dithia-(3',6',9',12'-tetraoxatetradecyl)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate). The crystal structures of a new ligand precursor (2-[4,5-dithia-(3',6',9',12'-tetraoxatetradecyl)-1,3-dithiol-2-ylidene]-4,5-bis(2-cyanoethylsulfanyl)-1,3-dithiole, IIIc) and complexes 5-7 have been determined by X-ray crystallography. Complexes 1-7 show intense electronic absorption bands in the UV-vis region due to the intramolecular mixed metal/ligand-to-ligand charge-transfer transition, and they display significant solvatochromic behavior. Redox properties of these compounds have been investigated by cyclic voltammetry, and complex 7 shows a significant response for Na+ ions with a large positive shift of ca. 45 mV.     

Synthesis, and two photon absorption properties of 7,7'-(iminundecahydro-closo-dodecaborate)-9,9'-(dihexyl)-2,2'-bifluorene

Hybrid organic-inorganic bis-tetrabutylammonium-7,7'-(iminundecahydro-closo-dodecaborate)-9,9'-(dihexyl)-2,2'-bifluorene (5) was prepared, and the influence of the closo-dodecaborate cluster on the two-photon absorption properties of bi-fluorene derivatives was demonstrated.     

Synthesis, characterization, and DFT-TDDFT computational study of a ruthenium complex containing a functionalized tetradentate ligand

A ruthenium complex trans-[Ru(L)(NCS)2], L = 4,4' '-di-tert-butyl-4',4' '-bis(carboxylic acid)-2,2':6',2' ':6' ',2' '-quaterpyridine (N886), was synthesized and characterized by spectroscopic and electrochemical methods. The absorption spectrum of the N886 complex shows metal-to-ligand charge-transfer transitions in the entire visible region and quasi-reversible oxidation and reduction potentials at E(1/2) = +0.38 and -1.92 V vs ferrocene, respectively. The electronic spectra of the N886 complex were calculated by density functional theory (DFT)-time-dependent DFT, which qualitatively reproduces the experimental absorption spectra for both the protonated and deprotonated species. From the analysis of the computed optical transitions of N886, we assign its absorption bands as mixed Ru/SCN-to-quaterpyridine charge-transfer transitions, which extend from the near-IR to the UV regions. The panchromatic response of the N886 complex renders it as a suitable sensitizer for solar energy conversion applications based on titanium dioxide mesoporous electrodes. The preliminary results using the N886 complex as a sensitizer in a dye-sensitized solar cell, with an electrolyte containing 0.60 M butylmethylimidazolium iodide, 0.03 M I2, and 0.50 M tert-butylpyridine in a mixture of acetonitrile and valeronitrile (volume ratio 1:1), show 40% incident photon-to-current efficiencies, yielding under standard AM 1.5 sunlight a short-circuit photocurrent density of 11.8 +/- 0.2 mA/cm(2), an open-circuit voltage of 680 +/- 30 mV, and a fill factor of 0.73 +/- 0.03, corresponding to an overall conversion efficiency of 5.85%.