In-plane uniaxial magnetic anisotropy of thin Fe layers on Si(1 1 1) induced upon grazing deposition of a Si capping layer

We demonstrate that an in-plane uniaxial magnetic anisotropy can be induced in Fe films grown on Si(1 1 1) by means of an appropriate Si capping layer. It is shown that grazing-incidence Si deposition reduces the three-fold symmetry of the body-centered-cubic (BCC) Fe(1 1 1) surface to two-fold, thus generating a surface-type uniaxial in-plane magnetic anisotropy contribution. The relevant magnetic easy axis direction depends in a critical way on the azimuth of the Si evaporation flux with respect to the Fe crystal surface directions. A simple qualitative model based on the change of the Fe surface by inhomogeneous chemical reaction with Si is proposed to interpret the magnetic anisotropy evolution.     

Magnetic anisotropy of epitaxial Fe layers grown on Si(0 0 1)

The magnetic properties of epitaxial iron films up to 80 monolayers (ML) thickness grown on Si(0 0 1) by using a template technique were investigated by means of superconducting quantum interference device and magneto-optic Kerr effect techniques. The thinnest films investigated (∼3 ML) exhibit a composition close to Fe₃Si with a Curie temperature below room temperature (RT) and strong out-of-plane remanent magnetization that reflects the presence of a dominant second order surface anisotropy term. Thicker films (⩾4 ML) are ferromagnetic at RT with remanent magnetization in film-plane and a composition closer to pure Fe with typically 8–10% silicon content. When deposited at normal incidence such films show simple in-plane fourfold anisotropy without uniaxial contribution. The relevant fourth-order effective anisotropy constant K₄^eff was measured versus film thickness and found to change its sign near 18 ML. The origin of this remarkable behavior is investigated by means of a Néel model and mainly traced back to fourth-order surface anisotropy and magneto-elastic effects related to the large biaxial in-plane compressive strain up to 3.5% in the thinnest (⩽25 ML) films.     

Structural and magnetic properties of evaporated Fe thin films on Si(1 1 1), Si(1 0 0) and glass substrates

We present experimental results on the structural and magnetic properties of series of Fe thin films evaporated onto Si(1 1 1), Si(1 0 0) and glass substrates. The Fe thickness, t, ranges from 6 to110 nm. X-ray diffraction (XRD) and atomic force microscopy (AFM) have been used to study the structure and surface morphology of these films. The magnetic properties were investigated by means of the Brillouin light scattering (BLS) and magnetic force microscopy (MFM) techniques. The Fe films grow with (1 1 0) texture; as t increases, this (1 1 0) texture becomes weaker for Fe/Si, while for Fe/glass, the texture changes from (1 1 0) to (2 1 1). Grains are larger in Fe/Si than in Fe/glass. The effective magnetization, 4πM_eff, inferred from BLS was found to be lower than the 4πM_S bulk value. Stress induced anisotropy might be in part responsible for this difference. MFM images reveal stripe domain structure for the 110 nm thick Fe/Si(1 0 0) only.     

Structural and magnetic properties of BCC Fe/Co (0 0 1) superlattices

In thin layered Fe/Co (0 0 1), grown on MgO (0 0 1), both Fe and Co crystallize in the body-centered cubic (BCC) structure, as seen in a series of superlattices where the layer thickness of the components is varied from two to twelve atomic monolayers. These superlattices have novel magnetic properties as observed by magnetization and polarized neutron reflectivity measurements. There is a significant enhancement of the magnetic moments of both Fe and Co at the interfaces. Furthermore, the easy axis of the system changes from [1 0 0] for films of low cobalt content to [1 1 0] for a Co content exceeding 33%. No indication of a uniaxial anisotropy component is found in any of the samples. The first anisotropy constant (K₁) of BCC Co is found to be negative with an estimated magnitude of 110 kJ/m³ at 10 K. In all cases, the magnetic moments of Fe and Co have parallel alignment.     

Magnetization reorientation in Ni (1 1 1) ultrathin films studied by low-temperature hysteresis measurements

Surface magneto-optical Kerr effect (SMOKE) magnetometry in the temperature range 10–300 K was exploited to investigate the magnetic properties of high-quality Cu/Ni/Cu/Si(1 1 1) epitaxial heterostructures with thickness of the Ni layer, d_Ni, between 10 and 60 Å. For a fixed temperature, the equilibrium direction of the magnetization is parallel or perpendicular to the film surface, depending on the Ni thickness, because of the competition among shape anisotropy, magnetoelastic anisotropy and interface anisotropy. No reorientation of the magnetization could be observed as a function of temperature, for any of the specimens analyzed, while a large variation of the loop squareness and coercivity was found. This last variation has been qualitatively explained using a theoretical model based on a Green's function technique, valid for a monodomain film with a coherent rotation of the magnetization.     

The origin of narrowing of the Si 2p coincidence photoelectron spectroscopy main line of Si(1 0 0) surface

The Si 2p photoelectron spectroscopy (PES) main line of Si(1 0 0) surface measured in coincidence with the singles (noncoincidence) Si L_2,3-VV Auger-electron spectroscopy (AES) elastic peak is calculated. The agreement with the experiment is good. The present work is the first many-body calculation of the experimental coincidence PES spectrum of solid surface. The narrowing of the coincidence Si 2p PES main line compared to the singles one is due to the mechanism inherent in the coincidence PES. The inherent mechanism is explained by a many-body theory by which photoemission and Auger-electron emission are treated on the same footing.     

Adsorption of methanol and methoxy on NiAl(1 1 0) and Ni3Al(1 1 1): A DFT study

The adsorption of methanol and methoxy on NiAl(1 1 0) and Ni₃Al(1 1 1) has been investigated using density functional theory (DFT). Optimised adsorption geometries and core level shifts are presented. On both surfaces we find that methanol binds to the Al on-top site via its oxygen atom and with the C–O axis tilted away from the surface normal. Methoxy also shows a preference for Al-dominated sites. On NiAl(1 1 0), we predict that methoxy adsorbs with its oxygen atom in the Al–Al bridge site, while it is determined to be adsorbed with its oxygen atom in a 2Ni + Al hollow site on Ni₃Al(1 1 1), closer to Al than Ni. Surface and adsorbate induced binding energy shifts in the Al 2p states are calculated and found to be in good agreement with experimental high resolution photoelectron spectroscopy results.     

Tunable magnetic properties of arrays of Fe(1 1 0) nanowires grown on kinetically grooved W(1 1 0) self-organized templates

We report a detailed magnetic study of a new type of self-organized nanowires discussed briefly previously [B. Borca et al., Appl. Phys. Lett. 90 (2007) 142507]. The templates, prepared on sapphire wafers in a kinetically limited regime, consist of uniaxially grooved W(1 1 0) surfaces, with a lateral period here tuned to 15 nm. Fe deposition leads to the formation of (1 1 0) 7 nm-wide wires located at the bottom of the grooves. The effect of capping layers (Mo, Pd, Au, Al) and underlayers (Mo, W) on the magnetic anisotropy of the wires was studied. Significant discrepancies with figures known for thin flat films are evidenced and discussed in terms of step anisotropy and strain-dependent surface anisotropy. Demagnetizing coefficients of cylinders with a triangular isosceles cross-section have also been calculated, to estimate the contribution of dipolar anisotropy. Finally, the dependence of magnetic anisotropy with the interface element was used to tune the blocking temperature of the wires, here from 50 to 200 K.     

Atomic and electronic properties of furan on the Si(0 0 1)-(2 × 2) surface

The atomic and electronic properties of the adsorption of furan (C₄H₄O) molecule on the Si(1 0 0)-(2 × 2) surface have been studied using ab initio calculations based on pseudopotential and density functional theory. We have considered two possible chemisorption mechanisms: (i) [4 + 2] and (ii) [2 + 2] cycloaddition reactions. We have found that the [4 + 2] interaction mechanism was energetically more favorable than the [2 + 2] mechanism, by about 0.2 eV/molecule. The average angle between the CC double bond and Si(1 0 0) surface normal was found to be 22°, which is somewhat smaller than the experimental value of 28°, but somewhat bigger than other theoretical value of 19°. The electronic band structure, chemical bonds, and theoretical scanning tunneling microscopy images have also been calculated. We have determined a total of six surface states (one unoccupied and five occupied) in the fundamental band gap. Our results are seen to be in good agreement with the recent near edge X-ray absorption fine structure and high resolution photoemission spectroscopy data.     

In situ magneto-optical Kerr effect study of uncovered Fe films on ZnSe(0 0 1)

The magnetic properties of uncovered Fe/ZnSe/GaAs(1 0 0) ultrathin films have been determined in situ by magneto-optical Kerr effect (MOKE). Fe films up to 10 monolayers (ML) thick were deposited on c(2×2) Zn-rich ZnSe/GaAs(0 0 1) surfaces at 180 °C. We have studied the thickness dependence of the in-plane lattice parameter of the Fe films and of the MOKE hysteresis loops in the longitudinal geometry, at 150 K, under magnetic fields up to 0.1 T applied along the [1 1 0] and [1-1 0] directions of the ZnSe(0 0 1). Reflection high energy electron diffraction show that in the low thickness regime the Fe films present an in-plane structural anisotropy characterized by an expansion along the [1 1 0] direction. Hysteretic loops were obtained only starting from ∼5 ML Fe. We found the onset of an uniaxial magnetic anisotropy with [1 1 0] magnetic easy axis at 7 ML Fe.     

Observation of charge transfer states of F4-TCNQ on the 2-methylpropene chemisorbed Si(1 0 0)(2 × 1) surface

We have investigated the valence electronic states of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F₄-TCNQ) on the 2-methylpropene chemisorbed Si(1 0 0)(2 × 1) surface using valence photoelectron spectroscopy. Since the electron affinity of condensed F₄-TCNQ is 5.24 eV and the energy from the valence band maximum of the 2-methylpropene saturated Si(1 0 0)(2 × 1) surface to the vacuum level is 4.1 eV, spontaneous charge transfer would be expected in the present system. At sub-monolayer coverage of F₄-TCNQ, characteristic peaks are observed at 1.1 and 2.5 eV below Fermi energy. The former peak is assigned to a singly occupied affinity level, and the latter is ascribed to a relaxed highest occupied molecular orbital of adsorbed F₄-TCNQ. The work function change is increased up to +1.3 eV as a function of F₄-TCNQ coverage. These results support the occurrence of charge transfer into F₄-TCNQ on the 2-methylpropene saturated Si(1 0 0)(2 × 1) surface.     

Structural properties of Cu clusters on Si(1 1 1):Cu2Si magic family

Basing on the results of the scanning tunneling microscopy (STM) observations and density functional theory (DFT) calculations, the structural model for the Cu magic clusters formed on Si(1 1 1)7 × 7 surface has been proposed. Using STM, composition of the Cu magic clusters has been evaluated from the quantitative analysis of the Cu and Si mass transport occurring during magic cluster converting into the Si(1 1 1)‘5.5 × 5.5’-Cu reconstruction upon annealing. Evaluation yields that Cu magic cluster accommodates 20 Cu atoms with 20 Si atoms being expelled from the corresponding 7 × 7 half unit cell (HUC). In order to fit these values, it has been suggested that the Cu magic clusters resemble fragments of the Cu₂Si-silicide monolayer incorporated into the rest-atom layer of the Si(1 1 1)7 × 7 HUCs. Using DFT calculations, stability of the nineteen models has been tested of which five models appeared to have formation energies lower than that of the original Si(1 1 1)7 × 7 surface. The three of five models having the lowest formation energies have been concluded to be the most plausible ones. They resemble well the evaluated composition and their counterparts are found in the experimental STM images.     

Comparative dynamical study of the HD and isotopomers interacting with Pd(1 1 1) and Cu(1 1 0) surfaces

We study the dynamics of HD and H₂ molecules interacting with Pd(1 1 1) and Cu(1 1 0) using the classical trajectory method based on potential energy surfaces obtained from Density Functional Theory calculations. Our results predict a negligible isotopic effect on the dissociative adsorption probability on Pd(1 1 1) whereas on Cu(1 1 0), the adsorption probability for HD(ν_i=0) is slightly lower than for H₂(ν_i=0), mainly due to its lower initial vibrational zero point energy. The final rotational energy distribution of scattered HD and H₂ molecules are very similar. This shows that the asymmetric mass distribution of HD, barely affects the fraction of initial translational energy transferred to rotation during the scattering process. Our calculations point to the larger number of open rotational excitation channels for HD, as the main cause of rotational excitation probabilities larger than for H₂. The theoretical apparent rotational temperature, T_rot, of HD molecules scattered from Pd(1 1 1) at impact energy , is in good agreement with the experimental value. In contrast, for Cu(1 1 0) the theoretical T_rot is much lower than the value measured for Cu(1 0 0). Possible reasons for such a discrepancy between theory and experiments are discussed.     

Eley–Rideal reaction dynamics between O atoms on β-cristobalite (1 0 0) surface: A new interpolated potential energy surface and classical trajectory study

We present a theoretical study of the collisions of atomic oxygen with O-precovered β-cristobalite (1 0 0) surface. We have constructed a multidimensional potential energy surface for the O₂/β-cristobalite (1 0 0) system based mainly on a dense grid of density functional theory points by using the interpolation corrugation-reducing procedure. Classical trajectories have been computed for quasithermal (100–1500 K) and state-specific (e.g., collision energies between 0.01 and 4 eV) conditions of reactants for different O incident angles (θ_v). Atomic sticking and O_2(adsorbed) formation are the main processes, although atomic reflection and Eley–Rideal (ER) reaction (i.e., O₂ gas) are also significant, depending their reaction probabilities on the O incident angle. ER reaction is enhanced by temperature increase, with an activation energy derived from the atomic recombination coefficient (γ_O(θ_v = 0°, T)) equal to 0.24 ± 0.02 eV within the 500–1500 K range, in close agreement with experimental data. Calculated γ_O(θ_v = 0°, T) values compare quite well with available experimental γ_O(T) although a more accurate calculation is proposed. Chemical energy accommodation coefficient β_O(T) is also discussed as a function of ER and other competitive contributions.     

The origin of inter-dimer-row correlated adsorption for NH3 on Si(0 0 1)

We discuss the interaction between adsorbing ammonia molecules and pre-adsorbed ammonia fragments on the Si(0 0 1) surface, searching for experimental evidence of a H-bonded precursor state predicted by modelling. While correlations along dimer rows have already been identified, these mix substrate-mediated effects due to dimer buckling with ammonia–adsorbate effects. Correlations between fragments on neighbouring dimer rows are not affected by substrate effects (in this system), allowing an analysis of direct ammonia–adsorbate effects. We present an analysis of cross-row correlations in existing high-coverage STM data which shows significant correlations between NH₂ groups on neighbouring dimer rows over a significant range, providing evidence for the H-bonded precursor state with a range of around 10 Å. We discuss implications for the interpretation of STM images of ammonia on Si(0 0 1).     

Magnetic characteristics of thin Ni films electrodeposited on n-Si(1 1 1)

The nanocrystalline Ni films were grown on n-Si(1 1 1) substrate by pulsed electrodeposition in non-aqueous NiCl₂ + methanol solution. The frequency of potential pulse was modulated during the deposition of Ni onto Si substrates. When the frequency varies from 20 to 900 Hz, the average size of Ni nanocrystallites varied in the ranges from 48 to 130 nm. In these cases, all Ni films have grown through a three-dimensional instantaneous nucleation followed by diffusion-limited growth. From X-ray diffraction measurement, it has been found that Ni(1 1 1) grows preferentially on the Si(1 1 1) substrates. The magnetic hysteresis loops for as-deposited films were measured by using VSM. As the angle θ between film plane and applied magnetic field varies from 0 to 90, the coercivity (H_c) and squareness (S) obtained from the magnetic hysteresis loops showed an opposite behavior. With the increase in θ, H_c increased but S decreased near linearly. We have also investigated the variation of H_c as a function of Ni nanocrystallite’s size. From VSM measurement, we could observe that the coercivities for the magnetic field applied perpendicular and parallel to the film plane increase up to the average size of 86 nm but begin to decrease over this size.     

Ab initio study of structural and magnetic properties of cubic Fe4N(0 0 1) surface

First-principles calculations are employed to study the structural and magnetic properties of fully-relaxed cubic Fe₄N(0 0 1) surfaces with both Fe₂- and Fe₂N-termination. The results of surface stability calculations show that the (0 0 1) surface of Fe₄N is most possibly existing with Fe₂N-termination. Slab structures have more localized features in the density of states especially for the Fe₂N-terminated surface due to structure relaxation. The average magnetic moments of Fe atoms increase with increasing thickness of slabs. The calculated interlayer distances indicate that the decreases of d₁₂ and d₂₃ result in stronger hybridization and shorter bond distances between Fe2 atom in the second layer and other atoms in surface or the third layers, which lead to variation of magnetic moments with different slab thicknesses.     

Atomic and electronic structure of group-IV adsorbates on the GaAs(0 0 1)-(1 × 2) surface

Ab initio calculations, based on pseudopotentials and density functional theory, have been performed to investigate the atomic and electronic structure of the group-IV adsorbates (C, Si, Ge, Sn, and Pb) on the GaAs(0 0 1)-(1 × 2) surface considered in two different models: (i) non-segregated Ga-IV-capped structure and (ii) segregated structure in which the group-IV atoms occupying the second layer while the As atom floats to the surface. The non-segregated structure is energetically more favorable than the segregated structure for Sn and Pb, whereas it is the other way around for C, Si, and Ge.     

Growth and characterization of CoSi2 films on Si (1 0 0) substrates

In the present work, a special solid phase epitaxy method has been adapted for the preparation of CoSi₂ film. This method includes an epitaxial growth of Co films on Si (1 0 0) substrate, and in situ annealing of the Co/Si films in vacuum. It has been found that at the substrate temperature of 360°C, fcc cobalt film grows epitaxially on the Si (1 0 0) surface. The crystallographic orientation relations between fcc Co film and Si substrate determined from the electron diffraction result are: (0 0 1) Co//(0 0 1) Si, [1 0 0] Co//[1 1 0]Si. Upon annealing at temperatures range from 500 to 600°C, Co film reacts with Si substrate and transforms into CoSi₂. The CoSi₂ films prepared by this way are characterized by XTEM, XPS and AFM.     

Magnetische grenzflächen-anisotropie von amorphem Fe in kontakt mit nichtmagnetischen metallen

The magnetic properties of very thin ferromagnetic Fe films (1–10 atomic layers) in contact with nonmagnetic amorphous metals are investigated. Apart from the demagnetization energy, which supports a magnetization in the plane of the film, an energy of magnetic anisotropy occurs in the interlayer, which has the tendency to orient the magnetization perpendicular to the surface. The anomalous Hall effect of the ferromagnetic films is used to investigate their magnetic properties. From the measurements, we get the applied magnetic field B_s, which is necessary to orient the magnetization perpendicular to the film surface. In addition to a constant term, B_s is proportional to 1/d, which is typical of surface effects and yields the energy of the interface anisotropy. The value of this energy is strongly dependent on the nonmagnetic metal and is smaller for the system Pb/Fe than for Sn/Fe. Furthermore, the experimental results show no drastic reduction of the atomic magnetic moment in the surface layer.