石墨烯-管尖固相萃取-液相色谱-串联质谱法测定贝类中10种脂溶性贝类毒素

以石墨烯为吸附剂，制作了石墨烯-管尖固相萃取装置，结合液相色谱-串联质谱，建立了一种同时测定贝类中10种脂溶性贝类毒素的方法。实验对提取剂、石墨烯的用量、淋洗剂的种类和用量、洗脱剂的种类和用量等实验参数进行了详细优化。在最优的实验条件下，10种脂溶性贝类毒素在各自相应浓度范围内线性良好，相关系数均大于0.99，方法检出限（LOD）和定量限（LOQ）分别在0.1~1.1 μg/kg和0.3~3.2 μg/kg之间；对阴性牡蛎样品进行3个水平的加标回收实验，10种脂溶性贝类毒素的回收率在72.0%~101.2%之间，相对标准偏差小于15%。结果表明，该方法灵敏度高，操作简单高效，适用于贝类水产品中脂溶性贝类毒素的检测分析。     

Determination of antibiotics in aquatic environment by solid-phase extraction followed by liquid chromatography-electrospray ionization mass spectrometry

A robust and sensitive solid-phase extraction followed by liquid chromatography-electrospray ionization mass spectrometric (LC-ESI-MS) method for determination of antibiotics viz., fluoroquinolones, sulfamethoxazole, trimethoprim and cephalosporines in surface waters was developed. The sample recoveries on Oasis HLB cartridges were found to be >80%. Identification was carried out by LC-ESI-MS/MS. The positive ion ESI mass spectra containing the peaks of quasimolecular ions [M+H](+) allowed the determination of molecular masses whereas the fragment ions obtained by MS/MS of [M+H](+) ions permitted the structural assignment. Quantification was carried out by selective ion monitoring (SIM) using the quasimolecular ions [M+H](+) of the parent compounds. The detection and quantification limits were found to be in the range of 0.6-8.1 and 2.0-24.0 microg/L. The surface waters of different lakes and tanks of Hyderabad, India were found to contain a few antibiotics.     

Determination of mercapturic acids in urine by solid-phase extraction followed by liquid chromatography-electrospray ionization mass spectrometry

A novel method for the determination of five kinds of mercapturic acids, found in urine as metabolites of alkylbenzenes, based on liquid chromatography-electrospray ionization mass spectrometry is described. A solid-phase extraction procedure was used for the extraction of the mercapturic acids from urine and the separation was performed on a reversed-phase C30 column. The detection limits were in the range 2.4-3.2 ng ml-1.     

Validated method for determination of ultra-trace closantel residues in bovine tissues and milk by solid-phase extraction and liquid chromatography-electrospray ionization-tandem mass spectrometry

A liquid chromatographic-electrospray ionisation-tandem mass spectrometry method (LC-ESI-MS/MS) with solid extraction was developed and validated for the detection and determination of closantel residues in bovine tissues and milk. An acetonitrile-acetone mixture (80:20, v/v) was used for one-stage extraction of closantel residues in bovine tissues and milk samples, and the extract was cleaned by solid phase extraction with Oasis MAX cartridges. The mass spectrometer was operated in multiple reactions monitoring mode with negative electrospray interface. The limits of detection in different matrices were in the range of 0.008-0.009 microg/kg. The overall recoveries for bovine muscle, liver, kidney and milk samples spiked at four levels including MRL were in the range of 76.0-94.3%. The overall relative standard deviations were in the range of 3.57-8.61%. The linearity is satisfactory with a correlation coefficient (r(2)) of 0.9913-0.9987 at both concentration ranges of 0.02-100 microg/kg and 200-5000 microg/kg. The method is capable of identifying closantel residues at > or =0.02 microg/kg levels and was applied in the determination of closantel residues in animal origin foods.     

On-line solid-phase extraction-ion-pair liquid chromatography-electrospray mass spectrometry for the trace determination of naphthalene monosulphonates in water.

This paper presents an HPLC-MS method for the fully automated determination of a group of naphthalene monosulphonates in environmental water samples. The analytical procedure consisted of on-line ion-pair solid-phase extraction using a PLRP-S precolumn and ion-pair LC separation with triethylamine as ion-pair reagent in both cases. A mass spectrometric detector, coupled to LC through an electrospray interface and operated in negative ion mode, was used. Diagnostic ions usually corresponded to [SO3]- and/or [M-SO2H]- together with [M-H] and/or [M-2H+Na]-. The method was applied to the trace determination of several sulphonates present in tap water, seawater and water from the Ebro river. The analytes were determined at a concentration level between 0.05 and 1 microg l(-1) under selected ion monitoring acquisition by preconcentrating just 15 ml of sample. Naphthalene-1-sulphonate and naphthalene-2-sulphonate were identified and quantified in one of the samples of seawater.     

Liquid chromatography--multiple tandem mass spectrometry for the determination of ten azaspiracids, including hydroxyl analogues in shellfish

Azaspiracids (AZAs) are a group of polyether toxins that cause food poisoning in humans. These toxins, produced by marine dinoflagellates, accumulate in filter-feeding shellfish, especially mussels. Sensitive liquid chromatography-electrospray ionisation mass spectrometry (LC-ESI-MS(n)) methods have been developed for the determination of the major AZAs and their hydroxyl analogues. These methods, utilising both chromatographic and mass resolution, were applied for the determination of 10 AZAs in mussels (Mytilus edulis). An optimised isocratic reversed phase method (3 microm Luna-2 C18 column) separated 10 azaspiracids using acetonitrile/water (46:54, v/v) containing 0.05% trifluoroacetic acid (TFA) and 0.004% ammonium acetate in 55 min. Analyte determination using MS3 involved trapping and fragmentation of the [M + H]+ and [M + H - H2O]+ ions with detection of the [M + H - 2H2O]+ ion for each AZA. Linear calibrations were obtained for AZA1, using spiked shellfish extracts, in the range 0.05-1.00 microg/ml (r2 = 0.997) with a detection limit of 5 pg (signal : noise = 3). The major fragmentation pathways in hydroxylated azaspiracids were elucidated using hydrogen/deuterium (H/D) exchange experiments. An LC-MS3 method was developed using unique parent ions and product ions, [M + H - H2O - CgH10O2R1R3]+, that involved fragmentation of the A-ring. This facilitated the discrimination between 10 azapiracids, AZA1-10. Thus, this rapid LC-MS3 method did not require complete chromatographic resolution and the run-time of 7 min had detection limits better than 20 pg for each toxin.     

Determination of azaspiracids in shellfish using liquid chromatography/tandem electrospray mass spectrometry.

Azaspiracid (AZA1), a recently discovered marine toxin, is responsible for the new human toxic syndrome, azaspiracid poisoning (AZP), which is caused by the consumption of contaminated shellfish. A new, sensitive liquid chromatography/mass spectrometry (LC/MS) method has been developed for the determination of AZA1 and its analogues, 8-methylazaspiracid (AZA2) and 22-demethylazaspiracid (AZA3). Separation of these toxins was achieved using reversed-phase LC and coupled, via an electrospray ionisation (ESI) source, to an ion-trap mass spectrometer. Spectra showed the protonated molecules, [M + H]+, and their major product ions, due to the sequential loss of two water molecules, [M + H - H2O]+, [M + H - 2H2O]+, in addition to fragment ions that are characteristic of these cyclic polyethers. A highly specific and sensitive LC/MS(3) analytical method was developed and, using shellfish extracts containing AZA1, the detection limit (S/N = 3) was 4 pg on-column, corresponding to 0.8 ng/mL. Using the protocol presented here, this is equivalent to 0.37 ng/g shellfish tissue and good linear calibrations were obtained for AZA1 in shellfish extracts (average r2 = 0.9988). Good reproducibility was achieved with % RSD values (N = 5) ranging from 1.5% (0.75 microg/mL) to 4.2% (0.05 microg/mL). An efficient procedure for the extraction of toxins from shellfish aided the development of a rapid protocol for the determination of the three predominant azaspiracids.     

A nanoparticle-based solid-phase extraction method for liquid chromatography-electrospray ionization-tandem mass spectrometric analysis

A solid-phase extraction (SPE) procedure with the use of superparamagnetic Fe(3)O(4) nanoparticles as extracting agent was developed for HPLC-ESI-MS/MS analysis. Four most heavily used triazine pesticides (herbicides) were taken as the test compounds. The NPs showed an excellent capability to retain the compounds tested, and a quantitative extraction was achieved within 10min under the testing conditions, i.e. 100 microL NP solution was added to 400 mL sample in a beaker with stirring. After extraction, the superparamagnetic NPs were easily collected by using an external magnet. Very importantly, analytes retained on the Fe(3)O(4) NPs could be quantitatively recovered by dissolving the NPs with an HCl solution, allowing subsequent HPLC-ESI-MS/MS quantification. A capillary HPLC-ESI-MS/MS method with the present NP-based SPE procedure was developed for the determination of triazines including atrazine, prometryn, terbutryn, and propazine. Atrazine-d(5) was used as internal standard. The method had an LOD of 10 pg/mL atrazine, and a linear calibration curve over a range from 30 pg to 50.0 ng/mL. Simultaneous determination of the four triazine pesticides in water samples taken from local lakes was demonstrated.     

Quantitative determination of rocuronium in human plasma by liquid chromatography-electrospray ionization mass spectrometry

Liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) was used for the quantification of the neuromuscular blocking agent rocuronium in human plasma. Verapamil was used as internal standard. The samples were subjected to a dichloromethane liquid-liquid extraction after ion pairing of the positively charged ammonium compound with iodide prior to LC-MS. Optimized conditions involved separation on a Symmetry Shield RP-18 column (50 x 2.1 mm, 3.5 microm) using a 15-min gradient from 10 to 90% acetonitrile in water containing 0.1% trifluoroacetic acid at 250 microl/min. Linear detector responses for standards were observed from 25 to 2,000 ng/ml. The extraction recovery averaged 59% for rocuronium and 83% for the internal standard. The limit of quantification (LOQ), using 500 microl of plasma, was 25 ng/ml. Precision ranged from 1.3 to 19% (LOQ), and accuracy was between 92 and 112%. In plasma samples, at 20 and 4 degrees C, rocuronium was stable at physiological pH for 4 h; frozen at -30 degrees C it was stable for at least 75 days. The method was found suitable for the analysis of samples collected during pharmacokinetic investigations in humans.     

Multi-residue analytical method for the determination of emerging pollutants in water by solid-phase extraction and liquid chromatography-tandem mass spectrometry

This paper describes the development and validation of a method for the simultaneous determination of 53 multi-class emerging organic pollutants in water samples using solid-phase extraction (SPE) followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS), using electrospray ionisation (ESI) in both positive and negative modes. Target compounds include acidic herbicides, UV filters, insect repellents, organophosphorous flame retardants, a bactericide, pharmaceuticals and metabolites. A single SPE consisting on the loading of 200-500 mL of sample adjusted to pH 7 on Oasis HLB 200mg cartridges and elution with methanol, permitted obtaining good recoveries: higher than 60% for tap, surface and wastewater in most cases. The 7 isotopically labelled internal standards effectively compensated losses during sample preparation and matrix effects at LC-MS/MS determination. The precision of the method, calculated as relative standard deviation (RSD) was below 15% for all compounds and all tested matrices. Detection limits (LODs) based on the confirmation, less intense, MRM (multiple reaction monitoring) transition and considering blanks varied between 0.3 and 30 ngL(-1). Finally, the developed method was applied to the determination of target analytes in various samples, including tap, surface and waste water. Among the tested emerging pollutants, 31 were found in wastewater in concentrations reaching up to 10 microgL(-1) in the case of ibuprofen. Also, 13 species were detected in tap water with concentrations up to 0.13 microgL(-1) for tri(chloropropyl) phosphate (TCPP).     

Simultaneous determination of gibberellic acid, indole-3-acetic acid and abscisic acid in wheat extracts by solid-phase extraction and liquid chromatography-electrospray tandem mass spectrometry

A liquid chromatography–tandem mass spectrometry (LC–MS/MS) method was developed for simultaneous determination of three representative phytohormones in plant samples: gibberellic acid (GA₃), indole-3-acetic acid (IAA) and abscisic acid (ABA). A solid-phase extraction (SPE) pretreatment method was used to concentrate and purify the three phytohormones of different groups from plant samples. The separation was carried out on a C₁₈ reversed-phase column, using methanol/water containing 0.2% formic acid (50:50, v/v) as the isocratic mobile phase at the flow-rate of 1.0 mL min⁻¹, and the three phytohormones were eluted within 7 min. A linear ion trap mass spectrometer equipped with electrospray ionization source was operated in negative ion mode. Selective reaction monitoring (SRM) was employed for quantitative measurement. The SRM transitions monitored were as 345 → 239, 301 for GA₃, 174 → 130 for IAA and 263 → 153, 219 for ABA. Good linearities were found within the ranges of 5–200 μg mL⁻¹ for IAA and 0.005–10 μg mL⁻¹ for ABA and GA₃. Their detection limits based on a signal-to-noise ratio of three were 0.005 μg mL⁻¹, 2.2 μg mL⁻¹ and 0.003 μg mL⁻¹ for GA₃, IAA and ABA, respectively. Good recoveries from 95.5% to 102.4% for the three phytohormones were obtained. The results demonstrated that the SPE-LC–MS/MS method developed is highly effective for analyzing trace amounts of the three phytohormones in plant samples.     

Ultra-pressure liquid chromatography-electrospray tandem mass spectrometry for multiresidue determination of pesticides in water

A multiresidue analysis method has been developed for the determination of pesticides in water by ultra-performance liquid chromatography (UPLC) combined with tandem mass spectrometry (MS/MS). The selected pesticides represent a broad range of polarity and volatility [benzoylcyclohexanedione (mesotrione and sulcotrione); chloroacetamide (acetochlor, alachlor, dimethenamide, and metolachlor); phenoxyacetic acid (2,4-D and MCPA); phenoxypropionic (dichloprop and mecoprop); phenylurea (chlortoluron, diuron, isoproturon, linuron, and metoxuron); sulfonylurea (foramsulfuron, iodosulfuron, and nicolsulfuron); triazine (atrazine, cyanazine, desethylatrazine (DEA), desisopropylatrazine (DIA), simazine, and terbutylazine)]. The analytes were extracted using solid-phase extraction (SPE). The separation was carried out on an acquity UPLC BEH C18 column (1.7 microm, 50 mm x 1 mm ID) using a gradient elution profile and mobile phase consisting of 0.1% formic acid in water and acetonitrile. The pesticides were detected with a tandem mass spectrometer after being ionised positively or negatively (depending on the molecule) using an electrospray ionisation (ESI) source. To achieve the suitable extraction conditions for sample preparation, several parameters affecting the efficiency of SPE such as the nature of the sorbent and the eluent, extractant volume and pH were studied. The best recovery was obtained by the extraction with an Oasis HLB cartridge and 3 mL of a solution of acetonitrile/dichloromethane (1:1, v/v) at pH 2. The average recoveries of the pesticides in different samples ranged from 82 to 109%. The weight least squares (WLS) linear regression was used to calculate the limits of detection and quantification (LOD and LOQ) because the dispersion was heteroskedastic. All the pesticides could be correctly quantified at a concentration level of 50 ng L(-1) and most of them could be detected at a concentration inferior or equal to 8 ng L(-1). Efficiency and robustness of this method were evaluated by the analysis of several samples of real natural water.     

Sensitive method for the determination of baclofen in plasma by means of solid-phase extraction and liquid chromatography-tandem mass spectrometry.

A simple and sensitive method for the determination of baclofen in plasma is described. Baclofen and the internal standard, KM 08205, were isolated from plasma by solid-phase extraction using C18 material. After separation by reversed-phase liquid chromatography, the analytes were detected with tandem mass spectrometry. The extraction procedure was optimised regarding the solid-phase extraction material, the pH in the conditioning solution and the washing volume. The method was proven to be selective and sensitive with an absolute recovery of about 95%, a relative standard deviation below 5% and a limit of quantification of 10 nmol/1.     

Optimized extraction of phospholipids and lysophospholipids for nanoflow liquid chromatography-electrospray ionization-tandem mass spectrometry

The efficiencies of four different methods for the extraction of phospholipids (PLs) and lysophospholipids (LPLs) from human plasma samples were examined by comparing extraction recovery values using nanoflow liquid chromatography-electrospray ionization-mass spectrometry (nLC-ESI-MS). For recovery measurements, six PL and six LPL standards of different head groups were spiked into a human plasma sample, and the peak areas of each individual species after extraction were measured from the chromatograms of the nLC-ESI-MS runs. Recovery was calculated by comparing the peak area of an extracted standard species with that of the same species' spike after extraction of the same plasma sample. For lipid extraction, four different extraction methods were examined: three based on the Folch method with different organic solvents such as CHCl(3), methyl-tert-butyl ether (MTBE), and MTBE/CH(3)OH, and one relatively fast method involving CH(3)OH only. Evaluations of recovery showed that the modified Folch method with MTBE/CH(3)OH proposed in this study was effective for extracting most PL and LPL standards. Then, the four extraction methods were compared with the identified numbers of plasma PLs and LPLs, of which molecular structures can be confirmed by data-dependent, collision-induced dissociation experiments during nLC-ESI-MS-MS. These results demonstrated that the proposed method yielded the identification of 54 LPLs and 66 PLs from a plasma sample, which was the highest identification rate among the four methods.     

Simultaneous determination nucleosides in marine organisms using ultrasound-assisted extraction followed by hydrophilic interaction liquid chromatography-electrospray ionization time-of-flight mass spectrometry

A new method has been developed based on ultrasound-assisted extraction (UAE) followed by hydrophilic interaction chromatography (HILIC) and electrospray ionization time-of-flight mass spectrometry (ESI-TOF/MS) for the simultaneous determination of 16 nucleosides and nucleobases in medicinal extracts of various marine organisms. The separation was achieved on a Venusil HILIC column (250×4.6 mm id, 5 μm) and gradient elution using a solution of acetonitrile and buffer (0.20% formic acid and 20 mmol/L ammonium acetate) as the mobile phase. Identification of the 16 target nucleosides and nucleobases was based on the retention time, UV spectra, and mass measurements of the protonated molecules ([M+H](+)) and main fragment ions (ESI-TOF/MS). In addition, non-target compounds of 2'-deoxyinosine and four other amino acids were also tentatively identified by ESI-TOF/MS. The 16 target compounds were quantified by HILIC-ESI-TOF/MS under optimized mass conditions. All calibration curves showed good linearity (r(2)>0.9951). The recoveries were 84.72-124.10%, and the limits of detection of the 16 target compounds were 0.6-130.0 ng/mL. The developed method was applied to quantify the target compounds in 15 batches of various marine organisms. The method has potential applicability for the identification and determination of highly polar and low-concentration active compounds in marine organisms.     

Sensitive method for the determination of lipophilic marine biotoxins in extracts of mussels and processed shellfish by high-performance liquid chromatography–tandem mass spectrometry based on enrichment by solid-phase extraction

A solid-phase extraction (SPE) method for the enrichment and clean-up of lipophilic marine biotoxins from extracts of different species of bivalve molluscs and processed shellfish products was developed. Okadaic acid (OA), pectenotoxin2 (PTX2), azaspiracid1 (AZA1) and yessotoxin (YTX) were determined by LC–MS/MS in hydrolyzed and non-hydrolyzed extracts. Applying a concentration factor of 10 the limit of quantification for the four toxins was determined to be 1 μg/kg. An organized in-house ring trial proved transferability of the method protocol and satisfactory results for all four toxins with a relative standard deviation (RSD) of 5–12%. The precision of the whole method including LC–MS detection was determined by processing seven independent extractions analyzed in independent sequences. RSD ranged between 12% and 24%. This SPE method was tested within a concentration range corresponding to the range of the current European Union regulatory limits (up to 160 μg/kg for the OA group), but it would also be applicable to a lower μg/kg range which is important in view of a possible decrease of regulatory limits as proposed by a working group of the European Food Safety Authority. The potential of SPE as a cleaning tool to cope with matrix effects in LC–MS/MS was studied and compared to liquid–liquid portioning.     

Comparison of solid-phase extraction and micro-solid-phase extraction for liquid chromatography/mass spectrometry analysis of pesticides in water samples

Our recent on-line solid-phase extraction (SPE) device for micro-liquid chromatography, known as micro-solid-phase extraction (microSPE), was compared with traditional SPE for the analysis, from aqueous samples, of 4 pesticides belonging to different classes. Two different kinds of adsorbents, C18 and graphitized carbon black, were tested. A 2-stage ion trap mass spectrometer, equipped with homemade microflow electrospray ion (ESI) source, was used. Detection limits with a signal-to-noise ratio of 3:1 for both extraction methods were in the range of 0.1 microg/L for all compounds. However, better recoveries were obtained when microSPE traps were used.     

Analysis of estrogens in river sediments by liquid chromatography-electrospray ionisation mass spectrometry. Comparison of tandem mass spectrometry and time-of-flight mass spectrometry

A method has been developed and optimised for the determination of two natural estrogens, estrone (E1) and 17beta-estradiol (E2), and one synthetic estrogen, 17alpha-ethynylestradiol (EE2), in river sediments at the sub-ng/g level. This procedure includes microwave-assisted solvent extraction (MASE), solid-phase extraction and high-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) with electrospray ionisation. Using sediments spiked with the three estrogens at 10 ng/g wet weight, efficient extraction (>92%) of all the three analytes was achieved by MASE, and whole-procedure recoveries ranged from 82 to 98%. Optimisation of the LC separation allowed for substantial reduction of ionisation suppression in the electrospray source to a final level of <18% suppression. Time-of-flight mass spectrometry (TOF-MS) and MS/MS were compared for the analysis of sediment extracts, with the latter technique proving to be the most selective. The method detection limits achieved by LC-MS/MS were 15, 30 and 40 pg/g for E1, E2 and EE2, respectively, which were 13-fold lower than those obtained by LC-TOF-MS. Analysis of river sediments collected from the River Ouse, UK, showed the presence of the natural estrogens at sub-ng/g level. E1 levels ranged from 0.40 ng/g (dry weight) to 3.30 ng/g while E2 levels ranged from <0.03 to 1.20 ng/g and EE2 was never detected (<0.04 ng/g).