Electrocatalytic mechanism and kinetics of SOMs oxidation on ordered PtPb and PtBi intermetallic compounds: DEMS and FTIRS study

The electrocatalytic activities and mechanisms of PtPb and PtBi ordered intermetallic phases towards formic acid, formaldehyde and methanol oxidation have been studied by DEMS and FTIRS, and the results compared to those for a pure polycrystalline platinum electrode. While PtPb exhibits an enhanced electrocatalytic activity for the oxidation of all three organic molecules when compared to a Pt electrode, PtBi exhibits an enhanced catalytic activity towards formic acid and formaldehyde oxidation, but not methanol. FTIRS data indicate that adsorbed CO does not form on PtPb or PtBi intermetallic compounds during the oxidation of formic acid, formaldehyde and methanol, and therefore their oxidation on both PtPb and PtBi intermetallic compounds proceeds via a non-CO(ads) pathway. Quantitative DEMS measurements indicate that only CO(2) was detected as a final product during formic acid oxidation on Pt, PtPb and PtBi electrodes. At a smooth polycrystalline platinum electrode, the oxidation of formaldehyde and methanol produces mainly intermediates (formaldehyde and formic acid), while CO(2) is a minor product. In contrast, CO(2) is the major product for formaldehyde and methanol oxidation at a PtPb electrode. The high current efficiency of CO(2) formation for methanol and formaldehyde oxidation at a PtPb electrode can be ascribed to the complete dehydrogenation of formaldehyde and formic acid due to electronic effects. The low onset potential, high current density and high CO(2) yield make PtPb one of the most promising electrocatalysts for fuel cell applications using small organic molecules as fuels.     

Synthesis, characterization, and electrocatalytic activity of PtPb nanoparticles prepared by two synthetic approaches

Intermetallic PtPb nanoparticles have been synthesized by two solution-phase reduction methods. In the first (PtPb-B), Pt and Pb salts were reduced by sodium borohydride in methanol at room temperature. In the second (PtPb-N), metal-organic Pt and Pb precursors were reduced by sodium naphthalide in diglyme at 135 degrees C. Both methods produced small agglomerated nanoparticles of the ordered intermetallic PtPb (mean crystal domain size <15 nm) which were characterized by pXRD, SEM, UHV-STEM, BET, EDX, and electron diffraction. The electrocatalytic activity of PtPb nanoparticles produced by both methods toward formic acid and methanol oxidation was investigated and compared to Pt and PtRu. Both PtPb-B and PtPb-N nanoparticles exhibited enhanced electrocatalytic activity compared to commercially available Pt black and PtRu nanoparticles. For formic acid oxidation, the PtPb nanoparticles exhibited considerably lower onset potentials and higher current densities than Pt or PtRu. For methanol oxidation, the PtPb nanoparticles had onset potentials slightly positive of PtRu but exhibited higher current densities at potentials about 100 mV positive of onset. The general applicability of these methods for the synthesis of nanoparticles of ordered intermetallic phases is discussed.     

Electrooxidation of 2-propanol on Pt, Pd and Au in alkaline medium

Pd and Au are investigated as electrocatalysts for 2-propanol oxidation and compared with the conventional catalyst of Pt in alkaline medium. The current density for 2-propanol oxidation on Pd electrode is much higher than that on Pt electrode. The onset potential for 2-propanol oxidation on Pd electrode is more negative compared with that on Pt electrode. The results show that Pd is a good electrocatalyst for 2-propanol oxidation and the activity for the electrooxidation of 2-propanol is higher than Pt and Au in alkaline medium. Pd has higher electrocatalytic activity and better stability for the electrooxidation of 2-propanol. The present study shows a promising choice of Pd as effective electrocatalyst for 2-propanol electrooxidation in alkaline medium.     

Pd/Pt core–shell nanowire arrays as highly effective electrocatalysts for methanol electrooxidation in direct methanol fuel cells

Highly ordered Pd/Pt–core–shell nanowire arrays (Pd/Pt NWAs) have been prepared by anodized aluminum oxide (AAO) template-electrodeposition and magnetron sputtering methods. Pd/Pt NWA electrode shows a very high electrochemical active surface area and high electrocatalytic activity for the methanol electrooxidation in acid medium for direct methanol fuel cells (DMFCs). The mass specific anodic peak current density is 756.7 mA mg⁻¹ Pt for the methanol oxidation on the Pd/Pt NWA electrode, an increase by a factor of four as compared to conventional E-TEK PtRu/C electrocatalysts. The mechanism of the significant enhancement of the Pd/Pt core/shell NWA nanostructure in the efficiency and electrocatalytic activity of Pt for the methanol electrooxidation in acid medium is discussed.     

Composite hypo-hyper-d-intermetallic and interionic phases as supported interactive electrocatalysts

Interactive, strong interbonding and highly electron conductive nonstoichiometric titanium suboxide catalytic supports, Magneli phases (Ti(n)O(2n-1), on average Ti(4)O(7)), have been used in the electrocatalysis of hydrogen (HELR) and oxygen (OELR) electrode reactions with remarkable consequences and advanced achievements. The theory of hypo-hyper-d-interelectronic bonding of transition metal ions and atoms has been employed for selective ordered grafting and shown to stay in the core of the strong metal-support interaction (SMSI) in heterogeneous catalysis and electrocatalysis, and thereby the substantial cause for the improved synergistic activity of composite (electro)catalysts. The same fundament has been the thermodynamic basis for the thermal production of symmetric intermetallic Laves type phases of nanostructured electrocatalysts, in particular the ones with higher oxophilic properties of hypo-d-elements. Remarkably advanced in electrocatalytic activity, highly monatomically dispersed deposits of Pt upon Magneli phases are shown to be unique and highly promising electrocatalysts for the cathodic oxygen reduction (ORR). Nanostructured Au upon a thin nanocrystalline film of anatase titania has been confirmed by X-ray photoelectron spectroscopy (XPS) as a typical classical paradigm of the SMSI, and at the same time affording the basis for gold with strained d-orbitals, as the reversible hydrogen electrode. Magneli phases have been shown to be the best electrocatalytic supports with unique properties both for low temperature PEM fuel cells (LT PEM FCs) with pronounced CO tolerance and water electrolysis in membrane type hydrogen generators.     

铂基金属间化合物纳米晶的最新进展:可控合成与电催化应用

铂基金属间化合物纳米晶因其高度有序的结构特点,优异的抗氧化及耐腐蚀性能,作为电极材料被广泛应用于各类电催化反应,目前已有的PtCo金属间化合物纳米晶在燃料电池阴极反应(氧还原反应)中的活性和稳定性均达到了美国能源部(DOE) 2020年的目标。为了进一步提高金属间化合物纳米晶的电催化性能,需要对影响纳米晶电催化性能的因素进行深入研究。本文综述了铂基金属间化合物纳米晶的研究现状,着重介绍了铂基金属间化合物的可控合成策略及其在电催化领域的最新研究进展,分析总结了该领域存在的问题,并展望了其未来发展方向。     

Ordered mesoporous carbon nitrides with graphitic frameworks as metal-free, highly durable, methanol-tolerant oxygen reduction catalysts in an acidic medium

Developments of high-performance cost-effective electrocatalyts that can replace Pt catalysts have been a central theme in polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs). In this direction, nitrogen-doped carbon nanostructures free of metallic components have attracted particular attention. Here we show that directing graphitic carbon nitride frameworks into mesoporous architecture can generate a highly promising metal-free electrocatalyst for an oxygen reduction reaction (ORR) in an acidic medium. The ordered mesoporous carbon nitride (OMCN) was synthesized with a nanocasting strategy using ordered mesoporous silica as a template. A variety of characterizations revealed that the OMCN is constructed with graphitic carbon nitride frameworks and ordered arrays of uniform mesopores. The OMCN showed significantly enhanced electrocatalytic activity for ORR compared to bulk carbon nitride and ordered mesoporous carbon in terms of the current density and onset potential. A high surface area and an increased density of catalytically active nitrogen groups in the OMCN appear to contribute concomitantly to the enhanced performance of the OMCN. Furthermore, the OMCN exhibited superior durability and methanol tolerance to a Pt/C catalyst, suggesting its widespread utilization as an electrocatalyst for PEMFCs and DMFCs.     

X-ray fluorescence investigation of ordered intermetallic phases as electrocatalysts towards the oxidation of small organic molecules

The composition of ordered intermetallic nanoparticles (PtBi and PtPb) has been quantitatively studied by in situ X-ray fluorescence (XRF) during active electrochemical control in solutions of supporting electrolyte and small organic molecules (SOMs). Because the Pt L(β1,2) lines and the Bi L(α1,2) lines are only separated by 200 eV, an energy-dispersive detector and a multiple-channel analyzer (MCA) were used to record the major fluorescent emission lines from these two elements. The molar ratios of platinum to the less-noble elements (Bi, Pb) in the nanoparticles dramatically changed as a function of the applied upper limit potentials (E(ulp)) in cyclic voltammetric (CV) characterization. Similar to previous investigations for bulk intermetallic surfaces, the less-noble elements leached out from the surfaces of the intermetallic nanoparticles. For PtBi nanoparticles, the ratios of fluorescence intensities of Pt/Bi in the samples were 0.42, 0.96, and 1.36 for E(ulp)=+0.40, +0.80, and 1.20 V, respectively, while cycling the potential from -0.20 V to the E(ulp) value for 10 cycles. The leaching-out process of the less-noble elements occurred at more negative E(ulp) values than expected. After cycling to relatively positive E(ulp) values, nonuniform PtM (M=Bi of Pb) nanoparticles formed with a Pt-rich shell and intermetallic PtM core. When the supporting solutions contained active fuel molecules in addition to the intermetallic nanoparticles (formic acid for PtBi, formic acid and methanol for PtPb), kinetic stabilization effects were observed for E(ulp)=+0.80 V, in a way similar to the response of the bulk materials. It was of great importance to quantitatively explore the change in composition and structure of the intermetallic nanoparticles under active electrochemical control. More importantly, this approach represents a simple, universal, and multifunctional method for the study of multi-element nanoparticles as electrocatalysts. This is, to our knowledge, the first report of nondestructive, quantitative characterization of bimetallic or multi-elemental nanoparticles electrocatalysts under active electrochemical control.     

Composition effects of FePt alloy nanoparticles on the electro-oxidation of formic acid

The catalytic activities of FexPt100-x alloy nanoparticles at different compositions (x=10, 15, 42, 54, 58, and 63) in the electro-oxidation of formic acid have been investigated by using cyclic voltammetry (CV), chronoamperometry, and electrochemical impedance spectroscopy (EIS). It was observed that the electrocatalytic performance was strongly dependent on the FePt particle composition. In chronoamperometric measurements, the alloy particles at x approximately 50 showed the highest steady-state current density among the catalysts under study and maintained the best long-term stability. In addition, on the basis of the anodic peak current density, onset potentials, and the ratios of the anodic peak current density to the cathodic peak current density in CV studies, the catalytic activity for HCOOH oxidation was found to decrease in the order of Fe42Pt58>Fe54Pt46 approximately Fe58Pt42>Fe15Pt85>Fe10Pt90>Fe63Pt37. That is, within the present experimental context, the alloy nanoparticles at x approximately 50 appeared to exhibit the maximum electrocatalytic activity and stability with optimal tolerance to CO poisoning. Consistent responses were also observed in electrochemical impedance spectroscopic measurements. For the alloy nanoparticles that showed excellent tolerance to CO poisoning, the impedance in the Nyquist plots was found to change sign from positive to negative with increasing electrode potential, suggesting that the electron-transfer kinetics evolved from resistive to pseudoinductive and then to inductive characters. However, for the nanoparticles that were heavily poisoned by adsorbed CO species during formic acid oxidation, the impedance was found to be confined to the first quadrant at all electrode potentials. The present work highlights the influence of the molecular composition of Pt-based alloy electrocatalysts on the performance of formic acid electro-oxidation, an important aspect in the design of bimetal electrocatalysts in fuel cell applications.     

Carbon Aerogels Supported Pt Nanoparticles as Electrocatalysts for Methanol Oxidation in Alkaline Media

Carbon aerogels (CAs) were prepared by sol‐gel polycondensation of resorcinol and formaldehyde with BET surface area of 616 m² g^?1 and the average pore size of 9.8 nm. The prepared CAs were used as supports for Pt nanoparticles for methanol oxidation in alkaline media. In comparison with Pt supported on commercial Vulcan XC‐72R carbon (Pt/C) electrocatalysts, Pt supported on CAs (Pt/CAs) electrocatalysts exhibited higher peak current density and more negative onset potential toward methanol oxidation. The effects of different parameters such as NaOH concentration, methanol concentration, and scan rate on the methanol oxidation reaction were investigated in detail. The results showed that the Pt/CAs electrocatalysts had promising application for methanol oxidation in alkaline media.     

Ordered PdCu‐Based Nanoparticles as Bifunctional Oxygen‐Reduction and Ethanol‐Oxidation Electrocatalysts

The development of superior non‐platinum electrocatalysts for enhancing the electrocatalytic activity and stability for the oxygen‐reduction reaction (ORR) and liquid fuel oxidation reaction is very important for the commercialization of fuel cells, but still a great challenge. Herein, we demonstrate a new colloidal chemistry technique for making structurally ordered PdCu‐based nanoparticles (NPs) with composition control from PdCu to PdCuNi and PtCuCo. Under the dual tuning on the composition and intermetallic phase, the ordered PdCuCo NPs exhibit better activity and much enhanced stability for ORR and ethanol‐oxidation reaction (EOR) than those of disordered PdCuM NPs, the commercial Pt/C and Pd/C catalysts. The density functional theory (DFT) calculations reveal that the improved ORR activity on the PdCuM NPs stems from the catalytically active hollow sites arising from the ligand effect and the compressive strain on the Pd surface owing to the smaller atomic size of Cu, Co, and Ni.     

MnO/N-Doped Mesoporous Carbon as Advanced Oxygen Reduction Reaction Electrocatalyst for Zinc–Air Batteries

The development of alternative electrocatalysts exhibiting high activity in the oxygen reduction reaction (ORR) is vital for the deployment of large-scale clean energy devices, such as fuel cells and zinc–air batteries. N-doped carbon materials offer a promising platform for the design and synthesis of electrocatalysts due to their high ORR activity, high surface area, and tunable porosity. In this study, materials in which MnO nanoparticles are entrapped in N-doped mesoporous carbon (MnO/NC) were developed as electrocatalysts for the ORR, and their performances were evaluated in zinc–air batteries. The obtained carbon materials had large surface area and high electrocatalytic activity toward the ORR. The carbon compounds were fabricated by using NaCl as template in a one-pot process, which significantly simplifies the procedure for preparing mesoporous carbon materials and in turn reduces the total cost. A primary zinc–air battery based on this material exhibits an open-circuit voltage of 1.49 V, which is higher than that of conventional zinc–air batteries with Pt/C (Pt/C cell) as ORR catalyst (1.41 V). The assembled zinc–air battery delivered a peak power density of 168 mW cm⁻² at a current density of about 200 mA cm⁻², which is higher than that of an equivalent Pt/C cell (151 mW cm⁻² at a current density of ca. 200 mA cm⁻²). The electrocatalytic data revealed that MnO/NC is a promising nonprecious-metal ORR catalyst for practical applications in metal–air batteries.     

金属间化合物PtSb对乙醇的电催化氧化性能

采用氩弧熔炼和热处理方法获得PtSb有序金属间化合物材料. 用循环伏安和计时电流技术进行电化学性能测试. 在含有0. 25 mol•L^-1 CH₃CH₂OH的硫酸溶液中, 通过对乙醇电氧化的起始电位和电流密度大小的比较发现, PtSb金属间化合物具有良好的催化乙醇氧化性能. 利用XRD和XPS技术分析了晶体结构和电子结构. 采用不同扫描速率下的循环伏安技术得到乙醇氧化的电子交换系数(α), 发现C₂H_{5OH在PtSb催化剂表面上反应时的α远远大于在Pt电极表面的.}     

Pd/C promoted by Au for 2-propanol electrooxidation in alkaline media

Pd/C catalysts promoted by Au are investigated as electrocatalysts for the direct 2-propanol fuel cells in alkaline media. The results show that Pd is a good electrocatalyst for 2-propanol oxidation and the activity for 2-propanol electrooxidation is higher than that for methanol electrooxidation on the Pd/C electrocatalysts in alkaline media. Addition of Au can significantly increase the palladium catalytic activity and stability for the 2-propanol oxidation. PdAu4:1/C has higher electrocatalytic activity and better stability for the electrooxidation of 2-propanol than Pd/C and E-TEK Pt/C electrocatalysts. The present study shows the promising properties of Au promoted Pd/C as effective electrocatalysts for 2-propanol fuel based direct alcohol fuel cells.     

Intermetallic Pt2Si: magnetron-sputtering preparation and electrocatalysis toward ethanol oxidation

Although most transition metals have been tested as the promoter to Pt for electrocatalysis toward fuel cell reactions, semi-conductor elements, such as Si, have hitherto not been examined. Here we report a simple synthesis of intermetallic Pt₂Si electrode using magnetron sputtering and the electrocatalysis toward ethanol oxidation reaction (EOR). In comparison to Pt, the intermetallic Pt₂Si surface turns out to be much more active in catalyzing the EOR: the onset potential shifts negatively by 150 mV, and the current density at 0.6 V increases by a magnitude of one order. Such an enormous enhancement in EOR catalysis is ascribed to the promotion effects of Si, which can not only provide active surface oxygenated species to accelerate the removal of CO_ads, but also strongly alter the electronic property of Pt, as clearly indicated by the core-level shift in XPS spectrum.     

Controllable Electrodeposition of Platinum Nanoparticles on Graphene Nanosheet for Methanol Oxidation Reaction

A simple and cost-effective electrochemical method synthesized platinum nanoparticles on graphene nanosheet (PtNPs@GNS) is reported, and the Pt loading of the PtNPs@GNS can be controlled by electrodeposition. The structure and element analysis of the PtNPs@GNS have been investigated by scanning electron microscopy (SEM), Raman spectrum, X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS). The electrochemical measurement including electrochemical active surface area, current density, mass activity, oxidation peak potential,shows the PtNPs@GNS have more performance electrocatalytic properties for methanol oxidation reaction (MOR) compared to Vulcan XC-72 carbon (XC-72) supported PtNPs electrocatalysts. Probably, the cause which may be attributes to no aggregation of PtNPs and the well-dispersion on surface of GNS, so PtNPs@GNS show large electrochemically active surface area, highly electrocatalytic activity and stability in direct methanol fuel cells.     

A simple one-step preparation of high utilization AuPt nanoparticles supported on MWCNTs for methanol oxidation in alkaline medium

A simple one-step preparation of gold–platinum electrocatalysts supported on multi-walled carbon nanotubes (MWCNTs) with high utilization is reported. A low Pt loading series of bimetallic AuPt/MWCNTs catalysts were prepared by the improved ethylene glycol reduction method, and then they were compared in terms of the electrocatalytic activity for methanol oxidation using cyclic voltammetry (CV) and chronoamperometry in alkaline solutions. The structure of AuPt/MWCNTs was characterized by the transmission electron microscopy (TEM), X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDS). The results showed high Pt utilization, uniform AuPt nanoparticles size and good electrocatalytic activity for methanol electro-oxidation. The effect of Au/Pt mass ratio on electrocatalytic activity was also investigated by CV and chronoamperometry. The highest peak current density, lowest onset potential and best anti-poisoning effect for methanol electro-oxidation appeared at the Au/Pt/MWCNTs mass ratio of 2:4:32.     

Electrochemical characterization of MnO2 as electrocatalytic energy material for fuel cell electrode

 Development of inexpensive non Pt based high electrocatalytic energy materials is the need of the hour for fuel cell electrode to produce clean alternative green energy from synthesized bio alcohol using biomass. MnO₂, electro synthesized at different current density is found to be well performed electrocatalytic material, comparable to Pt, with higher current density, very low overvoltage for the electrochemical oxidation of methanol. From EIS study, the polarization resistance of the coated MnO₂ is found to be much low and electrical double layer capacitance is high, the effect increases with increase in current density of electro deposition. XRD, EDX and AAS analysis confirm the MnO₂ deposition. The morphology of SEM images exhibits an enhanced 3D effective substrate area, for electro oxidation of the fuel. A few nano structured grains of the deposited MnO₂ is also observed at higher current density. The fact supports that a high energetic inexpensive electro catalytic material has been found for fuel cell electrode to synthesis renewable energy from methanol fuel.     

Mesoporous PtPb Nanosheets as Efficient Electrocatalysts for Hydrogen Evolution and Ethanol Oxidation

Using a one-pot hydrothermal method with ethylenediamine, we have synthesized mesoporous PtPb nanosheets that exhibit exceptional activity in both hydrogen evolution and ethanol oxidation. The resulting PtPb nanosheets have a Pt-enriched structure with up to 80 % atomic content of Pt. The synthetic method generated a significant mesoporous structure, formed through the dissolution of Pb species. These advanced structures enable the mesoporous PtPb nanosheets to achieve a current density of 10 mA cm⁻² with an extreme low overpotential of 21 mV for hydrogen evolution under alkaline conditions. Furthermore, the mesoporous PtPb nanosheets exhibit superior catalytic activity and stability for ethanol oxidation. The highest catalytic current density of PtPb nanosheets is 5.66 times higher than that of commercial Pt/C. This research opens up new possibilities in designing mesoporous, two-dimensional noble-metal-based materials for electrochemical energy conversion with excellent performance.     

具有优异甲醇耐受性的Rh掺杂PdCu有序金属间化合物纳米粒子增强氧还原电催化

Direct methanol fuel cells (DMFCs), as one of the important energy conversion devices, are of great interest in the fields of energy, catalysis and materials. However, the application of DMFCs is presently challenged because of the limited activity and durability of cathode catalysts as well as the poisoning issues caused by methanol permeation to the cathode during operation. Herein, we report a new class of Rh-doped PdCu nanoparticles (NPs) with ordered intermetallic structure for enhancing the activity and durability of the cathode for oxygen reduction reaction (ORR) and achieving superior methanol tolerance. The disordered Rh-doped PdCu NPs can be prepared via a simple wet-chemical method, followed by annealing to convert it to ordered phases. The results of transmission electron microscopy (TEM), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), power X-ray diffraction (PXRD) analysis and high resolution TEM (HRTEM) successfully demonstrate the formation of near-spherical NPs with an average size of 6.5 ± 0.5 nm and the conversion of the phase structure. The complete phase transition temperatures of Rh-doped PdCu NPs and PdCu are 500 and 400 ℃, respectively. The molar ratio of Rh/Pd/Cu in the as-synthesized Rh-doped PdCu NPs is 5/48/47. Benefitting from Rh doping and the presence of the ordered intermetallic structure, the Rh-doped PdCu intermetallic electrocatalyst achieves the maximum ORR mass activity of 0.96 A·mg^-1 at 0.9 V versus reversible hydrogen electrode (RHE) under alkaline conditions—a 7.4-fold enhancement compared to the commercial Pt/C catalyst. For different electrocatalysts, the ORR activities follow the sequence, ordered Rh-doped PdCu intermetallics > ordered PdCu intermetallics > disordered Rh-doped PdCu NPs > disordered PdCu NPs > commercial Pt/C catalyst. In addition, the distinct structure endows the Rh-doped PdCu intermetallics with highly stable ORR durability with unaltered half-wave potential (E_1/2) and mass activity after continuous 20000 cycles, which are higher than those of other electrocatalysts. Furthermore, the E_1/2 of the Rh-doped PdCu intermetallics decreases by only 5 mV after adding 0.5 mol·L^-1 methanol to the electrolyte, while the commercial Pt/C catalyst negatively shifts by 235 mV and a distinct oxidation peak can be observed. The results indicate that the ORR activity of the Rh-doped PdCu intermetallic electrocatalyst can be well maintained even in the presence of poisoning environment. Our results have demonstrated that Rh-doped PdCu NPs with ordered intermetallic structures is a potential electrocatalyst toward the next-generation high-performance DMFCs.