Electrochemical oxidation and determination of ceftriaxone on a glassy carbon and carbon-nanotube-modified glassy carbon electrodes

The electrochemical behavior of ceftriaxone was investigated on a carbon-nanotube-modified glassy carbon (GC-CNT) electrode in a phosphate buffer solution, pH = 7.40, and the results were compared with those obtained using the unmodified one [glassy carbon (GC) electrode]. During oxidation of ceftriaxone, an irreversible anodic peak appeared, using both modified and unmodified electrodes. Cyclic voltammetric studies indicated that the oxidation process is irreversible and diffusion-controlled. The number of electrons exchanged in the electrooxidation process was obtained, and the data indicated that ceftriaxone is oxidized via a one-electron step. The results revealed that carbon nanotube promotes the rate of oxidation by increasing the peak current. In addition, ceftriaxone was oxidized at lower potentials, which thermodynamically is more favorable. These results were confirmed by impedance measurements. The electron-transfer coefficients and heterogeneous electron-transfer rate constants for ceftriaxone were reported using both the GC and GC-CNT electrodes. Furthermore, the diffusion coefficient of ceftriaxone was found to be 2.74 × 10⁻⁶ cm² s⁻¹. Binding of ceftriaxone to human serum albumin forms a kind of electroreactive species. The percentage of interaction of ceftriaxone with protein was also addressed. A sensitive, simple, and time-saving differential-pulse voltammetric procedure was developed for the analysis of ceftriaxone, using the GC-CNT electrode. Ceftriaxone can be determined with a detection limit of 4.03 × 10⁻⁶ M with the proposed method.     

Surface preparation of glassy carbon electrodes

Recent work on glassy carbon electrodes for various applications is reviewed. Activation of glassy carbon electrodes by different types of polishing, heat treatment, and electrochemical methods yields enhanced rates of electron transfer. Characterization of different glassy carbon surfaces by x-ray photoelectron spectroscopy shows that polished and electrochemically pretreated surfaces contain more oxygen on the surface than do unactivated surfaces; much of this oxygen is associated with phenolic groups. Causes of activation, characterization of glassy carbon by spectroscopic methods, and the role of surface cleanliness are summarized. For simple electron-transfer reactions, removal of contaminants from the electrode surface is important. For proton-coupled electrode reactions, specific interactions of reactants with catalytic groups created on the surface during polishing tend to play an important role in electrode activation     

金属氧化物微粒修饰电极对儿茶酚和对苯二酚的电催化

本文研究儿茶酚和对苯二酚在金属氧化物微粒修饰电极上的电化学行为,与抗坏血酸和草酸不同,不仅儿茶酚和对二酚的氧化反应发生了电催化,而且它们的还原反应也发生了电催化,用薄层电池循环伏安法研究了儿茶酚和对苯二酚在此修饰电极表面的吸附,并探讨了电催化反应机理。证明了儿茶酚和对苯二酚在MOx/GC电极上的吸附,是发生电催化的主要原因,儿茶酚、对苯二酚和抗坏血酸的混合物在金属氧化物微粒修饰电极上的波峰明显分开,有可能同时测定儿茶酚和抗环血酸,提供了分析应用的可能性。     

Perfluoro anion-exchange polymeric films on glassy carbon electrodes

Solutions of the perfluoro anion-exchange membrane TosHex® in a solvent mixture composed of methanol + isopropanol + water (1:1:1) were prepared and applied in coating glassy carbon electrodes. The evaporated films were used to accumulate the Fe(CN) ₆ redox couple on the electrode surface. The magnitude of the electrochemical response of the loaded films is comparable with that for Nafion® incorporated cationic redox species. The multicharged Fe(CN) ₆ couple accumulated in Tosflex® film causes an ion cross-linking of the polymeric backbone, thus decreasing ion transport in the film substantially.     

Voltammetric behavior of 1,2-dihydroxyanthraquinones attached to glassy carbon electrodes and their surface complexation with copper

The adsorption behavior of 1,2-dihydroxyanthraquinones on electrochemically treated GC electrodes has been analyzed on the basis of the Frumkin adsorption isotherm allowing for long-range interactions between adsorbed species. Their slow-scan voltammetric response corresponded with a voltammetric theory for reversible surface reactions accompanied by intermolecular interactions. The negative interaction parameter obtained indicated a repulsive interaction between the surface-confined species, which bound Cu²⁺ firmly at weakly acidic pHs. Although 1,2-dihydroxyanthraquinones behave normally as a bidentate ligand, the surface-immobilized species formed only a 1:1 complex with Cu(II), probably because of motional restraints imposed on them. The 1,2-dihydroxy groups of the ligand chelated a partially hydrolyzed copper(II) species, their oxidation thus being depressed. Surface-bound copper underwent a two-electron redox reaction repetitively without being released from the surface.     

Direct electrochemistry of catalase on glassy carbon electrodes.

Catalase was investigated as a possible catalyst of the electrochemical reduction of oxygen on glassy carbon electrodes. The presence of catalase dissolved in solution only provoked a moderate current increase, which was fully explained by the catalase-catalysed disproportionation of hydrogen peroxide (Scheme I). When catalase was adsorbed from dimethylsulfoxide on the surface of electrodes that did not undergo any electrochemical pre-treatment (EP), catalase efficiently catalysed oxygen reduction via direct electron transfer from the electrode (Scheme II). The results are discussed with respect to the electrode surface properties and the enzyme structure.     

Site-specific voltage control of adsorption on glassy carbon electrodes

The influence of applied potential on the adsorption of organic compounds on glassy carbon (GC) electrodes has been examined using electrochemically modulated liquid chromatography (EMLC). The results not only confirm that the extent of adsorption is site dependent [Anal. Chem. 69 (1997) 4680], but also demonstrate for the first time that these sites exhibit differences in their potential dependence of adsorption. The results additionally reveal how the extent of adsorption is affected by the supporting electrolyte. Together, these results demonstrate the power of EMLC to serve as a tool for unraveling fundamental issues regarding adsorption on carbonaceous and other electrified interfaces.     

Oxygen reduction on carbon nanomaterial-modified glassy carbon electrodes in alkaline solution

Electroreduction of oxygen in alkaline solution on glassy carbon (GC) electrodes modified with different carbon nanomaterials has been studied. Electrochemical experiments were carried out in 0.1 M KOH employing the rotating disk electrode and rotating ring-disk electrode methods. The GC disk electrodes were modified with carbon nanomaterials using polytetrafluoroethylene as a binder. Four different carbon nanomaterials were used: multiwalled carbon nanotubes, carbon black powder, and two carbide-derived carbons (CDC). For the first time, the electrocatalytic behavior of CDC materials toward oxygen reduction is explored. Electrochemical characterization of the materials showed that all the carbon nanomaterial-modified GC electrodes are highly active for the reduction of oxygen in alkaline solutions.     

Bioelectrochemical studies on catalase modified glassy carbon paste electrodes

The enzyme catalase (EC: 1.11.1.6) has been covalently coupled onto the surface of glassy carbon (GC) powder matrix using a 16 atom spacer arm. The enzyme coupled powder was made into a paste electrode that was used to study the electrochemical properties. Standard electrochemical techniques like cyclic voltammetry, differential pulse voltammetry and flow injection analysis studies were carried out using this paste electrode. The cyclic voltammogram of the modified paste exhibited a clear increase in the reduction peak at −180 mV in the presence of hydrogen peroxide. The potential at which maximum Faradaic activity was observed was determined using differential pulse voltammetry, which showed a clear peak at −100 mV. This potential was used to monitor the response of the electrode to varying substrate concentrations using a home made setup for flow injection analysis. A linear increase in the current values in the range 0.1–1 mM hydrogen peroxide concentration was observed in our system.     

Electrocatalysis of oxygen reduction on glassy carbon electrodes modified with anthraquinone moieties

Anthraquinone groups were electrochemically grafted to glassy carbon (GC) electrodes via methylene linker to study the oxygen reduction reaction (ORR) in alkaline medium. Two different anthraquinone derivatives, 2-bromomethyl-anthraquinone or 2-chloromethyl-anthraquinone, were used to modify the GC electrode surface. Several modification conditions encompassing potential cycling and electrolysis at a fixed potential were employed in order to vary the surface concentration of MAQ groups (Γ _MAQ) and to study the dependence of the O₂ reduction behaviour on electrografting procedure. Cyclic voltammetry confirmed the presence of anthraquinone moieties attached to the GC electrode and Γ _MAQ varied in the range of (0.5–2.4)?×?10^?10 mol cm^?2. Oxygen reduction was studied on MAQ-modified GC electrodes of various surface coverage using the rotating disc electrode (RDE) and rotating ring-disc electrode (RRDE) methods. The RDE and RRDE results of O₂ reduction reveal that GC/MAQ electrodes show rather similar electrocatalytic behaviour towards the ORR yielding hydrogen peroxide as the final product.     

Surface topography of anodically treated glassy carbon electrodes

Flat-topped mesas are formed on glassy carbon surfaces as a result of electrochemical oxidative treatment in aqueous sodium hydroxide. The topography of the anodically exposed glassy carbon was followed by phase detection interferometric microscopy. The appearance and the distribution of the mesas were found to be related to the mode of electrochemical treatment. A threshold time, a function of applied voltage, and a threshold voltage for the formation of the mesas were found. In addition, the physical size and number of the structures increased with applied voltage.     

Sonoelectroanalysis: investigation of bismuth-film-modified glassy carbon electrodes

Bismuth-modified glassy carbon electrodes have been investigated for their suitability in sonoelectroanalysis. The stability of the bismuth film to the application of ultrasound was assessed via voltammetric and atomic force microscopy (AFM) studies which revealed little ablation at powers up to an intensity of 130 W cm^–2 delivered from a 25-kHz sonic horn. Furthermore, bismuth-film-modified glassy carbon electrodes were evaluated for the sonoelectroanalytical quantification of zinc and cadmium. Detection limits of 2×10^–7 M and 6×10^–9 M respectively were found after a 60-s deposition time via an acoustically assisted deposition protocol.     

Permselectivity of neurotransmitters at overoxidized polypyrrole-film-coated glassy carbon electrodes

The permselectivity of neurotransmitters such as dopamine, epinephrine, and norepinephrine at overoxidized polypyrrole (OPPY)-film-coated glassy carbon electrodes has been investigated. The chemically-modified electrodes exhibit attractive permselectivity and antifouling properties of rejecting anionic species, e.g. ascorbate, etc. Compared with the response of neurotransmitters at modified electrodes overoxidized in phosphate buffer solution (pH 7.4), higher sensitivity and reversibility response can be obtained at modified electrodes overoxidized in sodium hydroxide solution. The effect of film thickness on the permselective response was tested. Rotating disk electrode experiments were used to determine the apparent diffusion coefficients of several electroactive solutes in the OPPY films. The influence of the hydrophobicity of the organic ions on the permeability within the polymer films was discussed. Dopamine and epinephrine were determined at the 1 x 10(-6)-1 x 10(-4) M level by means of voltammetry after an exposure period of 2 min in 0.1 M phosphate buffer (pH 7.4) with detection limits of 8 x 10(-7) M and 6 x 10(-7) M respectively.     

纳米金修饰玻碳电极对儿茶酚的催化氧化

研究了电沉积纳米金修饰玻碳电极对儿茶酚的催化氧化,发现该修饰电极使儿茶酚的氧化电位大大降低,峰电流显著增大并且线性范围较宽;讨论了酸度、沉积量、扫速等条件对儿茶酚在纳米金修饰玻碳电极上催化氧化的影响。该电极制备简单,重现性好,用于儿茶酚的定量分析,发现儿茶酚氧化峰电流与浓度在2.0×10-6~1.2×10-2mol/L范围内呈良好的线性关系,相关系数为0.9965,检出限(3σ)为3.2×10-7mol/L;用于样品检测,效果较好。     

Electrodeposition of Pt ultramicroparticles in Nafion films on glassy carbon electrodes

The electrodeposition of platinum particles into Nafion films on a glassy carbon electrode is described. The particles are dispersed three-dimensionally throughout the polymer layer. The active platinum surface area is determined by the charge required for the adsorption of hydrogen. The mass specific surface area of the particles grown in the Nafion film is surprisingly large, suggesting that the platinum particles are highly dispersed in the Nafion film. The average crystal size of the platinum clusters is in the range 10–20 nm. The exchange current density of the hydrogen evolution reaction has been determined in an acidic solution.     

Electrochemical behaviour of platinum at polymer-modified glassy carbon electrodes

In this paper, the preparations and voltammetric characteristics of chitosan-modified glassy carbon (Ct-MGC) and platinum electrodes are studied. Ct-MGC can be used for pre-concentration and quantification of trace amounts of platinum in solution. At low pH medium, the complex of Pt with protonated group-NH³⁺ in the chitosan molecule has been confirmed by FT-IR spectra studies.     

Covalent grafting of glassy carbon electrodes with diaryliodonium salts: new aspects

The applicability and versatility of the recently communicated procedure for the grafting of conducting carbon substrates by diaryliodonium salts is expanded. We have found that several types of organic arylic layers can be formed on the carbon surface and that the chemical functionalities of the thus formed layers can be varied extensively over electron withdrawing (for example, -NO2) to electron donating (for example, -OMe) groups. A comparative study involving the grafting of aryldiazonium salts reveals that, despite the two approaches being similar, iodonium salts exhibit spontaneous grafting to a significantly lower extent. Nevertheless, the grafted layer becomes less accessible to proton transport as visualized from a greater reluctance toward the reduction of surface-confined nitro groups to amino groups in acidic medium. Employment of unsymmetrical iodonium salts opens up the interesting possibility of forming organic films consisting of a mixture of two different aryl groups. Alternatively, such composite layers may be prepared by selecting iodonium and diazonium salts with comparable reduction properties. Analysis of the surfaces is carried out by means of cyclic voltammetry, X-ray photoelectron spectroscopy, and ToF-SIMS (time-of-flight secondary-ion mass spectrometry). The ToF-SIMS analysis primarily serves to provide unambiguous evidence for the covalent attachment of the organic layers to the surface.     

Electrocatalytic reduction of oxygen on the surface of glassy carbon electrodes modified with plumbagin

The preparation and electrochemical characterization of glassy carbon electrodes modified with plumbagin were investigated by employing cyclic voltammetry, chronoamperometry and rotating disc electrode techniques. The cyclic voltammograms of the electroreduction of oxygen showed an enhanced current peak at approximately −0.289 V in air-saturated phosphate buffer pH = 7 and scan rate 10 mV s⁻¹. The thermodynamic and kinetic parameters of the reduction of oxygen at glassy carbon have been evaluated using cyclic voltammetry. The experimental parameters were optimized and the mechanism of the catalytic process was discussed. The obtained values of E°′ (V vs. Ag/AgCl), the apparent electron transfer rate constant k_s (s⁻¹), heterogeneous rate constant for the reduction of O₂ at the surface of the modified electrode k_h (M⁻¹ s⁻¹) and α (charge transfer coefficient of oxygen) were as follows: −0.146, 23.4, 9.9 × 10³ and 0.57, respectively. In addition, plumbagin exhibited strong catalytic activity toward the reduction of H₂O₂.     

Electrochemical parameters of ethamsylate at multi-walled carbon nanotube modified glassy carbon electrodes

In this paper, some electrochemical parameters of ethamsylate at a multi-walled carbon nanotube modified glassy carbon electrode, such as the charge number, exchange current density, standard heterogeneous rate constant and diffusion coefficient, were measured by cyclic voltammetry, chronoamperometry and chronocoulometry. The modified electrode exhibits good promotion of the electrochemical reaction of ethamsylate and increases the standard heterogeneous rate constant of ethamsylate greatly. The differential pulse voltammetry responses of ethamsylate were linearly dependent on its concentrations in a range from 2.0 x 10(-6) to 6.0 x 10(-5) mol L(-1), with a detection limit of 4.0 x 10(-7) mol L(-1).