Dry deposition of pollutant and marker particles onto live mouse airway surfaces enhances monitoring of individual particle mucociliary transit behaviour

Particles suspended in the air are inhaled during normal respiration and unless cleared by airway defences, such as the mucociliary transit (MCT) system, they can remain and affect lung and airway health. Synchrotron phase‐contrast X‐ray imaging (PCXI) methods have been developed to non‐invasively monitor the behaviour of individual particles in live mouse airways and in previous studies the MCT behaviour of particles and fibres in the airways of live mice after deposition in a saline carrier fluid have been examined. In this study a range of common respirable pollutant particles (lead dust, quarry dust and fibreglass fibres) as well as marker particles (hollow glass micro‐spheres) were delivered into the trachea of live mice using a dry powder insufflator to more accurately mimic normal environmental particulate exposure and deposition via inhalation. The behaviour of the particles once delivered onto the airway surface was tracked over a five minute period via PCXI. All particles were visible after deposition. Fibreglass fibres remained stationary throughout while all other particle types transited the tracheal surface throughout the imaging period. In all cases the majority of the particle deposition and any airway surface activity was located close to the dorsal tracheal wall. Both the individual and bulk motions of the glass bead marker particles were visible and their behaviour enabled otherwise hidden MCT patterns to be revealed. This study verified the value of PCXI for examining the post‐deposition particulate MCT behaviour in the mouse trachea and highlighted that MCT is not a uniform process as suggested by radiolabel studies. It also directly revealed the advantages of dry particle delivery for establishing adequate particulate presence for visualizing MCT behaviour. The MCT behaviour and rate seen after dry particle delivery was different from that in previous carrier‐fluid studies. It is proposed that dry particle delivery is essential for producing environmentally realistic particle deposition and studying how living airway surfaces handle different types of inhaled particles by MCT processes.     

Real‐time non‐invasive detection of inhalable particulates delivered into live mouse airways

Fine non‐biological particles small enough to be suspended in the air are continually inhaled as we breathe. These particles deposit on airway surfaces where they are either cleared by airway defences or can remain and affect lung health. Pollutant particles from vehicles, building processes and mineral and industrial dusts have the potential to cause both immediate and delayed health problems. Because of their small size, it has not been possible to non‐invasively examine how individual particles deposit on live airways, or to consider how they behave on the airway surface after deposition. In this study, synchrotron phase‐contrast X‐ray imaging (PCXI) has been utilized to detect and monitor individual particle deposition. The in vitro detectability of a range of potentially respirable particulates was first determined. Of the particulates tested, only asbestos, quarry dust, fibreglass and galena (lead sulfate) were visible in vitro. These particulates were then examined after delivery into the nasal airway of live anaesthetized mice; all were detectable in vivo but each exhibited different surface appearances and behaviour along the airway surface. The two fibrous particulates appeared as agglomerations enveloped by fluid, while the non‐fibrous particulates were present as individual particles. Synchrotron PCXI provides the unique ability to non‐invasively detect and track deposition of individual particulates in live mouse airways. With further refinement of particulate sizing and delivery techniques, PCXI should provide a novel approach for live animal monitoring of airway particulates relevant to lung health.     

Feasibility study of propagation‐based phase‐contrast X‐ray lung imaging on the Imaging and Medical beamline at the Australian Synchrotron

Propagation‐based phase‐contrast X‐ray imaging (PB‐PCXI) using synchrotron radiation has achieved high‐resolution imaging of the lungs of small animals both in real time and in vivo. Current studies are applying such imaging techniques to lung disease models to aid in diagnosis and treatment development. At the Australian Synchrotron, the Imaging and Medical beamline (IMBL) is well equipped for PB‐PCXI, combining high flux and coherence with a beam size sufficient to image large animals, such as sheep, due to a wiggler source and source‐to‐sample distances of over 137 m. This study aimed to measure the capabilities of PB‐PCXI on IMBL for imaging small animal lungs to study lung disease. The feasibility of combining this technique with computed tomography for three‐dimensional imaging and X‐ray velocimetry for studies of airflow and non‐invasive lung function testing was also investigated. Detailed analysis of the role of the effective source size and sample‐to‐detector distance on lung image contrast was undertaken as well as phase retrieval for sample volume analysis. Results showed that PB‐PCXI of lung phantoms and mouse lungs produced high‐contrast images, with successful computed tomography and velocimetry also being carried out, suggesting that live animal lung imaging will also be feasible at the IMBL.     

Tracking extended mucociliary transport activity of individual deposited particles: longitudinal synchrotron X‐ray imaging in live mice

To assess potential therapies for respiratory diseases in which mucociliary transit (MCT) is impaired, such as cystic fibrosis and primary ciliary dyskinesia, a novel and non‐invasive MCT quantification method has been developed in which the transit rate and behaviour of individual micrometre‐sized deposited particles are measured in live mice using synchrotron phase‐contrast X‐ray imaging. Particle clearance by MCT is known to be a two‐phase process that occurs over a period of minutes to days. Previous studies have assessed MCT in the fast‐clearance phase, ～20 min after marker particle dosing. The aim of this study was to non‐invasively image changes in particle presence and MCT during the slow‐clearance phase, and simultaneously determine whether repeat synchrotron X‐ray imaging of mice was feasible over periods of 3, 9 and 25 h. All mice tolerated the repeat imaging procedure with no adverse effects. Quantitative image analysis revealed that the particle MCT rate and the number of particles present in the airway both decreased with time. This study successfully demonstrated for the first time that longitudinal synchrotron X‐ray imaging studies are possible in live small animals, provided appropriate animal handling techniques are used and care is taken to reduce the delivered radiation dose.     

Prediction of particle sticking efficiency for fly ash deposition at high temperatures

The tendency of ash particles to stick under high temperatures is dictated by the ash chemistry, particle physical properties, deposit surface properties and furnace operation conditions. A model has been developed in order to predict the particle sticking efficiency for fly ash deposition at high temperatures. The model incorporates the particle properties relevant to the ash chemistry, particle kinetic energy and furnace operation conditions and takes into consideration the partial sticking behaviour and the deposit layer. To test the model, the sticking behaviours of synthetic ash in a drop tube furnace are evaluated and the slagging formation from coal combustion in a down-fired furnace is modelled. Compared with the measurements, the proposed model presents reasonable prediction performance on the particle sticking behaviour and the ash deposition formation. Through a sensitivity analysis, furnace operation conditions (velocity and temperature), contact angle and particle size have been found to be the significant factors in controlling the sticking behaviours for the synthetic ash particles. The ash chemistry and furnace temperature dictate the wetting potential of the ash particles and the melting ability of the deposit surface; particle size and density not only control the particle kinetic energy, but also affect the particle temperature. The furnace velocity condition has been identified as being able to influence the selective deposition behaviour, where the maximum deposition efficiency moves to smaller particles when increasing the gas velocity. In addition, the thermophoresis effect on the arrival rate of the particles reduces with increasing the gas velocity. Further, increasing the melting degree of the deposit layer could greatly enhance the predicted deposition formation, in particular for the high furnace velocity condition.     

气载放射性微粒在真实人体上呼吸道模型内沉积特性的研究

基于人体医学CT扫描,重建得到"鼻腔-咽喉主气管-六级支气管"三维几何模型;采用大涡模拟和离散相模型的描述颗粒运动,并在拉格朗日框架下跟踪颗粒。考察了四种气载放射性微粒在典型呼吸强度下的运动和沉积。结果表明:在各工况下,气载放射性颗粒在呼吸道内运动受流道变化、缩放效应、呼吸强度和阻流面等影响较大,均呈现出明显的积聚性和沉积的高度不均匀性,易形成局部沉积热点。在4个弯曲面、2个缩放管结构区域以及支管分叉面出现大量颗粒沉积。气载放射性颗粒的沉积热点区域将导致人体组织细胞的应激反应,造成组织和器官的辐射损伤。颗粒的沉积率随粒径和呼吸强度的增加而增加,但粒径小于0.5μm后,沉积率呈相反趋势。大颗粒在呼吸道内受流道变化、呼吸强度和阻流效应等影响较大,小颗粒受布朗运动和斯坦夫升力影响更显著。     

Method for independent control of particle size and distance in rhodium epitaxy on TiO2(110)-(1×2) surface An STM study

A method for independent control of the particle size and distance is presented for rhodium epitaxy on TiO₂(110)-(1×2) surface. The real space imaging of the surface morphology was performed by scanning tunneling microscopy. The amount of the deposited rhodium was checked by Auger electron spectrometry. The method consists of two steps: (i) evaporation of 0.001–0.050 ML equivalent of rhodium at room temperature with a post-annealing at 1100 K (“seeding”); (ii) post-deposition of rhodium for growing of the Rh nanoparticles formed in step (i) (“growing”). The mechanism of this procedure is based on the large difference of the surface diffusion coefficient between Rh adatoms and Rh nanocrystallites larger than 1–2 nm. In the first step the average distance between the metal particles is controlled in the range 5–200 nm, the second step determines the particles size (2–50 nm). This work demonstrates that the diffusion processes of metal nanoparticles of different sizes and the growing modes of the crystallites can be studied in detail by application of seeded surfaces.     

The effects of powder properties on in-flight particle velocity and deposition process during low pressure cold spray process

In cold spray process, impacting velocity and critical velocity of particles dominate the deposition process and coating properties for given materials. The impacting velocity and critical velocity of particles depend on the powder properties and cold spray conditions. In the present study, the in-flight particle velocity of copper powder in low pressure cold spraying was measured using an imaging technique. The effects of particle size and particle morphology on in-flight particle velocity and deposition efficiency were investigated. The critical velocity of copper powder was estimated by combining the in-flight particle velocity and deposition efficiency. The effect of annealing of feedstock powder on deposition and critical velocity was also investigated. The results showed that the irregular shape particle presents higher in-flight velocity than the spherical shape particle under the same condition. For irregular shape particles, the in-flight velocity decreased from 390 to 282 m/s as the particle size increases from 20 to 60 μm. Critical velocities of about 425 m/s and more than 550 m/s were estimated for the feedstock copper powder with spherical and irregular shape morphology, respectively. For the irregular shape particles, the critical velocity decreased from more than 550 to 460 m/s after preheating at 390 °C for 1 h. It was also found that the larger size powder presents a lower critical velocity in this study.     

Significant influence of particle surface oxidation on deposition efficiency, interface microstructure and adhesive strength of cold-sprayed copper coatings

The critical velocity for particle deposition in cold spraying is a key parameter, which depends not only on the material type, but also the particle temperature and oxidation condition. The dependency of deposition efficiency of cold spray Cu particles on the particle temperature and surface oxidation was examined. The effect of particle surface oxide scales on the interfacial microstructure and adhesive strength of the cold-sprayed Cu coatings was investigated. The results show that the deposition efficiency significantly increases with increasing the gas temperature but decreases with augmenting the oxygen content of the starting powder. The oxide inclusions at the interfaces between the deposited particles inhibit the effective bonding of fresh metals and remarkably lower the bond strength of the deposited Cu coatings on steel.     

Hetero-Colloidal Metal Particle Multilayer Films Grown Using Electrostatic Interactions at the Air–water Interface

The formation of nanoparticle multilayer films by electrostatic immobilization of surface-modified colloidal particles at the air–water interface has been recently demonstrated by us. In this paper, we extend our study to show that multilayer assemblies consisting of metal particles of different chemical nature (hetero-colloidal particle superlattices) and size can be deposited by the versatile Langmuir–Blodgett technique. Multilayer films consisting of a different number of bilayers of gold and silver colloidal particles have been deposited and characterized using quartz crystal microgravimetry and UV–visible spectroscopy measurements. It is observed that while layer-by-layer deposition of the different colloidal particle assemblies is possible by this technique without a detectable variation in the cluster density in the different layers, a degree of post-deposition reorganization of the clusters occurs in the film. In addition to this aging behavior, the effect of different organic solvents on the reorganization process has also been studied.     

Detection of Deposited Particles from the Backside of a Glass Plate

Microcontamination of product surfaces by deposited particles is an important problem in clean technologies. A most sensitive product to contamination by particles is a wafer during chip production. Therefore, methods for monitoring particle deposition on wafer surfaces have been developed in the last decade. A wafer with an unstructured and reflecting surface is inserted into the process equipment. After some time, depending on the process, this wafer is removed from the process equipment and is analysed with respect to the number of deposited particles using a wafer scanner. However, in situ particle detection in a process chamber is not possible with this technique. This would be possible if, instead of a monitor wafer, a transparent glass plate is mounted, e.g. in the housing of the process equipment. Then the illuminating and scattered light detection equipment can be mounted outside the process equipment. Since both the illuminating laser beam and the scattered light have to be transmitted through the glass plate, losses will occur, which will reduce the lower limit of detection with respect to particle size. In this article we estimate the detection possibilities theoretically and experimentally. A simple model based on Mie and vector scattering theory has been developed to describe the light-scattering behavior of a single spherical particle on a glass plate with random surface irregularities. The scattered light of individual particles of four particle sizes (1.03, 1.6, 2.92 and 4.23 μm) on the same glass surface and from the uncontaminated area of the glass plate was measured for unpolarized and normally incident light. The values of the scattered light from this model were compared with the experimental results. The comparison shows a reasonable agreement of the angular distribution of the scattered light. The developed model is used to predict the lower limit of detection for particles on a transparent surface. The theoretical estimations show that it should be possible to detect particles of a diameter down to 0.2 μm with the described measurement technique.     

Influence of substrate hardness transition on built-up of nanostructured WC-12Co by cold spraying

The ability of cold spray process to retain the feedstock microstructure into coating makes it possible to deposit nanostructured WC-Co coatings. In the present study, the deposition behavior of nanostructured WC-12Co coating was examined through the surface morphology and cross-sectional structure of the deposited single WC-12Co particle impacting on the substrates with different hardness using a nanostructured WC-12Co powder. Substrates included stainless steel, nickel-based self-fluxing alloy coatings with different hardness. It was observed from the top surface and cross-section of individual WC-12Co particles that the penetration leading to particle deposition depends on substrate hardness. When the substrate surface is covered by WC-12Co particles, the hardness of the newly formed substrate, i.e. the coating, increases greatly. The significant increase of the surface hardness leads to the rebounding off of impacting particles and erosion of the deposited particles, which prohibits effective built-up of coating. However, it was found that with spray jet fixed, a deposit with a thickness up to over 700 μm can be built-up. A model involving in substrate hardness transition during deposition is proposed to explain such phenomenon, which can be employed to optimize the conditions to build up a uniform nanostructured WC-12Co coating.     

Optical scatter imaging: subcellular morphometry in situ with Fourier filtering

We demonstrate a quantitative optical scatter imaging (OSI) technique, based on Fourier filtering, for detecting alterations in the size of particles with wavelength-scale dimensions. We generate our scatter image by taking the ratio of images collected at high and low numerical aperture in central dark-field microscopy. Such an image spatially encodes the ratio of wide to narrow angle scatter and hence provides a measure of local particle size. We validated OSI on sphere suspensions and live cells. In live cells, OSI revealed biochemically induced morphological changes that were not apparent in unprocessed differential interference contrast images. Unlike high-resolution imaging methods, OSI can provide size information for particles smaller than the camera's spatial resolution.     

氟磷共掺杂二氧化硅光纤预制棒的表面晶化

对F、P共掺杂光纤预制棒退火后的表面晶化行为进行了研究.由改进的化学汽相沉淀法制备的氟和磷共掺杂二氧化硅光纤预制棒玻璃样品在6 h的1 150 ℃控温加热处理后,其表面发生晶化.用X-射线衍射仪观测其晶相,主要为α-方石英,可使玻璃具有二阶光学非线性;用光学显微镜观察了其表面形貌并对结晶微粒的大小进行测量,知晶粒大小在十几到几十μm之间,会造成散射损耗的增加.实验结果,还显示氟对结晶过程有很大的影响.     

Analytical results for the cluster size distribution in controlled deposition processes

This paper proposes a controlled particle deposition model for cluster growth on the substrate surface and then presents exact results for the cluster (island) size distribution. In the system, at every time step a fixed number of particles are injected into the system and immediately deposited onto the substrate surface. It investigates the cluster size distribution by employing the generalized rate equation approach. The results exhibit that the evolution behaviour of the system depends crucially on the details of the adsorption rate kernel. The cluster size distribution can take the Poisson distribution or the conventional scaling form in some cases, while it is of a quite complex form in other cases.     

Conceptual limitations and extensions of lung-deposited Nanoparticle Surface Area Monitor (NSAM)

Nanoparticle Surface Area Monitor (NSAM, TSI model 3550 and Aerotrak 9000) is an instrument designed to measure airborne surface area concentrations that would deposit in the alveolar or tracheobronchial region of the lung. It was found that the instrument can only be reliably used for the size range of nanoparticles between 20 and 100 nm. The upper size range can be extended to 400 nm, where the minimum in the deposition curves occurs. While the fraction below 20 nm usually contributes only negligibly to the total surface area and is therefore not critical, a preseparator is needed to remove all particles above 400 nm in cases where the size distribution extends into the larger size range. Besides limitations in the particle size range, potential implications of extreme concentrations up to the coagulation limit, particle material (density and composition) and particle morphology are discussed. While concentration does not seem to pose any major constraints, the effect of different agglomerate shapes still has to be further investigated. Particle material has a noticeable impact neither on particle charging in NSAM nor on the deposition curves within the aforementioned size range, but particle hygroscopicity can cause the lung deposition curves to change significantly which currently cannot be mimicked with the instrument. Besides limitations, possible extensions are also discussed. It was found that the tendencies of the particle deposition curves of a reference worker for alveolar, tracheobronchial, total and nasal depositions share the same tendencies in the 20–400 nm size range and that their ratios are almost constant. This also seems to be the case for different individuals and under different breathing conditions. By means of appropriate calibration factors NSAM can be used to deliver the lung deposited surface area concentrations in all these regions, based on a single measurement.     

Voice and airway restoration: Endoscopic placement of molds and stents

Severe damage to the vocal folds and upper airways after translaryngeal endotracheal intubation occurs with greater frequency and to a greater extent than is usually surmised. Videolaryngoscopic techniques have led to prompt recognition of endolaryngeal/endotracheal lesions in the critical care setting. Traditionally, surgeons have treated obstructive sequelae such as glottic, subglottic, and tracheal stenosis by major transcervical and/or transthoracic resective and reconstructive surgery. Endolaryngeal core molds and endotracheal stents have conventionally been inserted by open surgical techniques. As a prototypic case illustrates, evolutional methods of endoscopic placement of prosthetic molds and stents combined with endoscopic optical/suction instrumentation and laser photoresection allow the physician to restore upper airway patency and phonatory vocal fold function without resorting to major surgery. Delta scan topograms provide radiographic imaging of the major airways.     

The desorption of CO from small Pt particles on Al2O3

The adsorption of CO on small Pt particles supported on alumina was studied using temperature programmed desorption (TPD). Samples were prepared by vapor deposition of Pt onto a flat substrate in ultra high vacuum. Metal coverages were reproducibly obtained using a film thickness monitor which was calibrated with Auger electron spectroscopy (AES). AES results indicated that Pt grew in a layer-by-layer manner on alumina at both 90 and 300 K and that these metal films aggregated into particles when heated above 650 K in vacuum. The average particle size could be estimated from the amount of CO desorbing in TPD and from the metal coverage and could be varied from 1.1 nm up to a continuous film. For the smallest particles, CO desorbed in a single state at 510 K. For larger particles, a second desorption state at 400 K was also observed. Since the desorption of CO occurs at similar temperatures on single crystals of Pt, these results indicate that the adsorption properties for CO on small particles of Pt on alumina are very similar to those for CO on bulk Pt. The change in the relative populations of the two desorption states with increasing particle size is interpreted as evidence for the formation of (111)-type facets on the larger particles.     

Pulsed electrodeposition and magnetism of two-dimensional assembly of controlled-size Co particles on Si substrates

We present an extremely simple and inexpensive way to obtain controlled-size and density Co metallic particles on Si(1 1 1) using electrodeposition. When unpatterned substrates are used, the particle density and size can be controlled by adjusting the pulse frequency and the total deposition time. Randomly arranged cobalt particles with diameters of few tens of nanometres are obtained for short deposition times. Continuing the deposition, the particle size and density can be increased until coalescence. Magnetic force microscopy images show magnetically coupled/uncoupled particles depending on the size and distance between them. For small decoupled particles, no in-plane uniaxial anisotropy is found, in agreement with transmission electron microscopy observations which show randomly oriented single crystal particles. As the particle coalescence increases, the in-plane anisotropy evaluated from magnetization loops increases as well. When deposited on focused ion beam patterned substrates, well organized nanoparticles with adjustable magnetic anisotropy are obtained. Ferromagnetic resonance measurements performed on these samples reveal that the magnetic anisotropy originates mainly from the particle shape.