低温恒温器简介

在低温领域中,经常需要对低温恒温条件下样品的各种低温性能,如热物理性质、机械性能、光学物理性能、磁热性能及超导性能等进行测试。这就需要提供一种实验装置来维持样品的低温恒温条件。而低温恒温器是一种能够提供低温恒温条件并与外界热绝缘的低温装置,它应用广泛,是进行低温实验的必要设备。主要介绍了低温恒温器的概念、应用、分类、结构及其设计。     

光纤波导色散的比例性质研究

基于麦克斯韦方程组的比例性质,讨论了光纤波导色散的比例性质,并对普通光纤、Bragg光纤和光子晶体光纤的波导色散进行了理论研究。以Bragg光纤为例,提出了一种根据波导色散的比例性质灵活设计光纤色散特性的方法。     

A novel method of rapidly modeling optical properties of actual photonic crystal fibres

<正>The flexible structure of photonic crystal fibre not only offers novel optical properties but also brings some difficulties in keeping the fibre structure in the fabrication process which inevitably cause the optical properties of the resulting fibre to deviate from the designed properties.Therefore,a method of evaluating the optical properties of the actual fibre is necessary for the purpose of application.Up to now,the methods employed to measure the properties of the actual photonic crystal fibre often require long fibre samples or complex expensive equipments.To our knowledge, there are few studies of modeling an actual photonic crystal fibre and evaluating its properties rapidly.In this paper,a novel method,based on the combination model of digital image processing and the finite element method,is proposed to rapidly model the optical properties of the actual photonic crystal fibre.Two kinds of photonic crystal fibres made by Crystal Fiber A/S are modeled.It is confirmed from numerical results that the proposed method is simple,rapid and accurate for evaluating the optical properties of the actual photonic crystal fibre without requiring complex equipment.     

Effect of coherence of generating radiations on optical parametric up conversion

The effect of the coherence properties of pumping and input radiations on parametric up conversion (PUC) is treated in this paper. It is shown here that the PUC depends essentially upon the coherence properties of the pumping radiation whilst it is hardly affected by the coherence properties of the input radiation. It has been found that for chaotic (Gaussian) pumping radiation with an extremely high degree of coherence the total conversion efficiency is one half of that for coherent (Poisson) pumping radiation, whilst for chaotic pumping radiation with a very low degree of coherence the PUC is much more effective. The influence of the coherence properties of pumping radiation upon the PUC is explained by the intermodal correlation effects in the nonlinear interaction.     

Optical detection of wound infection in vivo by near infrared diffuse reflectance spectroscopy

Detection of bacterial infection is important for deciding optimal treatment and management for wound. In the paper, near infrared diffuse reflectance spectroscopy is proposed for detection wound infection in vivo with optical properties. A porcine model is used as experimental subject in the detection of wound infection. The spectrally resolved data of the wounds are analyzed to extract the optical properties including reduced scattering coefficient and absorption coefficient. Based on optical properties, an ensemble model of chain-like agent genetic optimized Support Vector Machine is applied to discriminate wound infection. The experimental results demonstrate the feasibility and effectiveness of the method for rapid and noninvasive detection of wound infection using optical properties.     

Measurement of the bulk acoustic properties of fibrous materials at high temperatures

It is common for fibrous porous materials to be used in high temperature applications such as automotive and gas turbine exhaust silencers. Understanding the effect of temperature on the acoustic properties of these materials is crucial when attempting to predict silencer performance. This requires knowledge of the bulk acoustic properties of the porous materials and so this article aims to quantify the effect of temperature on the bulk acoustic properties of three fibrous materials: rock wool, basalt wool and an E-glass fibre. Measurements are undertaken here using a standard impedance tube that has been modified to accommodate temperatures of up to 500 °C. It is shown that measured data for the bulk acoustic properties may be collapsed using a standard Delany and Bazley curve fitting methodology provided one modifies the properties of the material flow resistivity and air to account for a change in temperature. Moreover, by using a previously proposed power law describing the dependence of the flow resistivity with temperature, one may successfully collapse data measured at every temperature and obtain the Delany and Bazley coefficients in the usual way. Accordingly, to predict the bulk acoustic properties of a fibrous material at elevated temperatures it is necessary only to measure these properties at room temperature, and then to apply the appropriate temperature corrections to the properties of the material flow resistivity and air when using the Delany and Bazley formulae.     

Modeling of the localy-functional properties of the material damaged by fields of defects

It is shown that for Mindlin media with fields of defects there is an alternative interpretation allowing to describe the material affected by defects as equivalent functionally-gradient material with varying properties for coordinates, modeled in the classical theory of elasticity. We establish clear relationships for determining the properties of functionally graded materials by the solutions, taking into account the availability of fields of defects. It is shown that, in general, the properties of equivalent functionally-gradient material depend on the coordinates, as well as on the loading and boundary conditions.     

Far-infra-red absorption of non-polar liquids

A new conformal solution theory using a single pure fluid as a reference substance for the calculation of thermodynamic properties of fluid mixtures is developed. The perturbation theory developed by Weeks, Chandler and Andersen (WCA) and by Verlet and Weis (VW) is used to calculate the reference properties. The mean density approximation and corresponding state principle are used to eliminate the higher order terms in the mixture system and to derive the pseudo-parameters for the reference system. The mixture properties are obtained from the reference properties and their corresponding hard sphere excess functions defined as the properties of the mixture less the value of the properties for the hard sphere mixture.

The excess functions of mixing for several liquid mixtures of Lennard-Jones fluids, obeying the Lorentz-Berthelet rule, are calculated by the new method (VW-HSE). Comparison with the results of other theories and Monte Carlo data shows definite improvement. Since only the properties of a pure reference fluid are directly calculated, the method can be applied to more complicated multicomponent systems without additional computational effort as required by other theories.     

低偏压下单层碳纳米管的输运特征

系统地计算了各种手性碳纳米管最低导带的电子速度和有效质量的变化规律,在此基础上推断手性碳纳米管低偏压下的输运特征,计算表明:在低偏压电子输运时,同一系列(手性角相同)的各种手性金属碳纳米管的输运性质相同,与管径无关,但不同系列的手性金属碳纳米管的输运性质有明显区别;而同一系列的各种手性半导体型碳纳米管的输运性质有一定差异,但不同系列的手性半导体型碳纳米管的输运性质有着显著差异.这一结果说明:碳纳米管在低偏压下的输运特征与系列有着密切的关系,手性角是决定各种碳纳米管在低偏压下具有不同输运性质的最关键的几何参 关键词： 碳纳米管 手性角 电子速度 有效质量     

Mechanism of plasma polymerization: The effect of substrate and substrate topography

Surface properties of metals and plastic substrates and properties of plasma polymerized films on these substrates are reported. The surface and film properties were measured with ellipsometry, surface potential difference, photoelectron-emission and fluid contact angles. Light scattering, profilometry and scanning electron microscopy were used to characterize surface roughness and topography. The modification of the adhesive properties of low energy surfaces (such as Teflon) by plasma polymerization is shown. Adhesive properties of plasma films on metals is also shown. It is shown that photoelectron-emission may be a valuable tool for detecting the presence and decay of excited molecules and radicals formed during plasma polymerization.     

Development of novel materials through interface engineering

The impact of interfaces in the processing and properties of polycrystalline material is briefly discussed. The local properties of the interfacial layer are considered in terms of composition, structure and related properties that differ substantially from those of the bulk phase. It has been postulated that novel materials with desired properties for specific industrial applications may be processed through interface engineering rather than through bulk chemistry. This paper considers the impact of interfaces on the properties of materials for technological applications, such as electrochemical devices for reduction of greenhouse gases, through energy conversion and environmental monitoring. The procedures that may be applied for the modification of interfacial chemistry are considered.     

双带频率选择表面设计

为了实现频率选择表面(FSS)的双带特性,设计了由矩形栅格和三圆环组合单元FSS。对FSS的谱域求解方法进行了详细的描述。采用谱域法分析了不同角度和极化入射波下FSS的频率响应性能。结果表明,所设计的FSS对于不同入射角度和极化电磁波具有稳定的双带、平顶传输及陡峭下降边缘特性。双带特性大致表现为1.8～5.4GHz的阻带和5.4～20.0GHz的通带。阻带谐振频率稳定在3.1GHz左右,而通带在-4dB的平顶传输带宽达14.3GHz以上。其陡峭下降边缘特性表现为S波段信号强烈反射,而其他波段信号通过,从而实现多波段通讯。该结构FSS可应用于卫星通信、雷达罩及其他相关领域。     

Aeroacoustics of T-junctions—An experimental investigation

An experimental method for determining the aeroacoustic properties of side branch orifices allowing for any combination of grazing and bias flow is presented. The geometry studied, a T-junction, is treated as an active acoustic three-port. The passive properties, describing the reflection and transmission of an incident acoustic wave, are described by a system matrix while the active properties are described by a source vector. Expressions for the acoustic impedance under various mean flow and acoustic incidence configurations are developed. In addition, methods for identifying regions where the system can generate sound, by studying only the passive properties, are discussed. A self-sustained oscillation is triggered at one of the identified regions by coupling a resonant system to the three-port.     

超高强块体非晶合金的研究进展

研制具有极限力学性能的金属材料一直是材料研究人员的梦想.超高强块体非晶合金是一类具有极高断裂强度(4 GPa)、高热稳定性(玻璃化转变温度通常高于800 K)和高硬度(通常高于12 GPa)的新型先进金属材料,其代表合金材料Co-Ta-B的断裂强度可达6 GPa,为目前公开报道的块体金属材料的强度记录值.本文系统地综述了该类超高强度块体非晶合金的组分、热学性能、弹性模量及力学性能,阐述了该类材料的研发历程;以弹性模量为联系桥梁,阐明了该类超高强块体非晶合金材料各物理性能的关联性,并揭示了其高强度、高硬度的价键本质.相关内容对于材料工作者了解该类超高强度金属材料的性能和特点,并推进该类材料在航空航天先进制造、超持久部件、机械加工等领域的实际应用有着重要意义.     

高双折射微结构光纤特性的研究

采用基于单轴各向异性完美匹配层吸收边界的频域有限差分方法研究一种椭圆芯高双折射微结构光纤的特性.通过计算,分析了空气孔尺寸和孔距对模式双折射、泄漏损耗以及模式截止波长的影响;综合研究了双折射微结构光纤的几种特性及其相互之间的影响和制约关系;并首次采用有效面积的方法研究高双折射微结构光纤的模式截止特性,分析单模传输条件;从而为高双折射微结构光纤的设计提供了一定的理论依据.     

Specific heat of super carbon nanotube and its chirality independence

The specific heat of the super carbon nanotube (ST) was investigated by the molecular structure mechanics method. At given temperature, it was found that the specific heat of the ST is a fixed value and is almost independent both of the length, diameter and of chirality of the ST. By comparing the influences of the chirality of the ST on its mechanical properties, electronic properties and thermal properties as well, we find that the chirality effects on the physical properties of STs can be neglected. This result may be regarded as a universal law for the physical properties of STs.     

Linearization of radiative transfer with respect to surface properties

The linearization of radiative transfer with respect to surface properties in the UV and visible part of the solar spectrum is presented. The proposed method is a rigorous extension of the radiative perturbation theory with respect to surface properties. Given the forward and adjoint intensity field, analytical expressions are provided for the linearization of any observable related to the radiation field with respect to surface properties characterized by Minnaert's and Lambertian bidirectional reflection distribution function. For the considered surface reflection characteristics, we also discuss an extension of the reduction approach of Chandrasekhar as an alternative linearization method. The suitability of both approaches for the combined retrieval of trace gas and surface properties from the backscattered sunlight in the UV and visible part of the spectrum is discussed. The authors come to the conclusion that the perturbation theory, for this purpose, represents the superior method because of its general applicability to any parameter characterizing the optical properties of the atmosphere and the underlying surface.     

Elastic properties of spherically anisotropic piezoelectric composites

Effective elastic properties of spherically anisotropic piezoelectric composites, whose spherically anisotropic piezo-electric inclusions are embedded in an infinite non-piezoelectric matrix, are theoretically investigated. Analytical solutions for the elastic displacements and the electric potentials under a uniform external strain are derived exactly. Taking into account of the coupling effects of elasticity, permittivity and piezoelectricity, the formula is derived for estimating the effective elastic properties based on the average field theory in the dilute limit. An elastic response mechanism is revealed, in which the effective elastic properties increase as inclusion piezoelectric properties increase and inclusion dielectric properties decrease. Moreover, a piezoelectric response mechanism, of which the effective piezoelectric response vanishes due to the symmetry of spherically anisotropic composite, is also disclosed.     

A simple effective pair potential for the molecular simulation of the thermodynamic properties of ammonia

A new optimized effective pair potential model is proposed, which is appropriate for the prediction of thermodynamic properties of fluid ammonia including vapour—liquid coexistence data. The phase behaviour is determined using a recently developed version of the Gibbs ensemble Monte Carlo method. Furthermore, liquid structure characteristics, the dielectric constant and supercritical properties are determined by Monte Carlo simulations in the isothermal—isobaric ensemble. The second virial coefficient of the pair potential model is calculated over a broad range of temperature. All properties are compared with experimental data or results of a multi-parameter equation of state for ammonia. The new model is found to yield coexistence properties and second virial coefficients in good agreement with experimental data and the results of the equation of state, respectively.