The Effect of TiO2 Catalyst on the NO Reduction by Barrier Discharge in Nitrogen

The study investigated NO reduction by N radicals produced by barrier discharge in nitrogen and the possible effect of TiO₂ catalyst on this reaction. The experiments for NO reduction were carried out at temperatures ranging from room temperature to 140 °C and at NO concentrations ranging from 200 to 800 ppm. The experimental results were described by a model which was based on six main reactions for the calculation of the NO and NO₂ concentrations. The analysis of model suggested two simple methods for the estimation of nitrogen radical production efficiency which in present study was 2 ppm/(J/L). The model also confirmed that N radicals are used very efficiently in the reduction of NO and this process can’t be improved by the catalyst. Nonetheless, experiments showed that the presence of TiO₂ catalyst improved the removal of NO. The experimental results can be explained by surface processes taking place with NO₂ with the help of other plasma produced nitrogen species.

     

低温等离子体转化NO/O2/N2气氛中NO的实验研究

通过建立低温等离子体实验系统, 研究了介质阻挡放电型低温等离子体反应器作用于NO/O2/N2混合气体系时, NO, O2初始浓度对NO的转化效率的影响以及NOx, O3浓度随能量密度的变化关系. 低温等离子体作用于NO/O2/N2混合气体系时, NO同时发生氧化还原反应, 氧化反应占主导地位, 大部分NO转化为NO2; NO转化率随O2, NO初始浓度增大而降低, 能量密度在450～600 J/L时转化率较高; 产生的O3浓度随能量密度的增大呈先增后减的趋势.     

Methane Conversion Using Dielectric Barrier Discharge：Comparison with Thermal Process and Catalyst Effects

The direct conversion of methane using a dielectric barrier discharge has been experimentally studied. Experiments with different values of flow rates and discharge voltages have been performed to investigate the effects on the conversion and reaction products both qualitatively and quantitatively. Experimental results indicate that the maximum conversion of methane has been 80% at an input flow rate of 5 ml/min and a discharge voltage of 4 kV. Experimental results also show that the optimum condition has occurred at a high discharge voltage and higher input flow rate. In terms of product distribution, a higher flow rate or shorter residence time can increase the selectivity for higher hydrocarbons. No hydrocarbon product was detected using the thermal method, except hydrogen and carbon. Increasing selectivity for ethane was found when Pt and Ru catalysts presented in the plasma reaction. Hydrogenation of acetylene in the catalyst surface could have been the reason for this phenomenon as the selectivity for acetylene in the products was decreasing.     

A Brief Catalyst Study on Direct Methane Conversion Using a Dielectric Barrier Discharge

A series of metal catalysts was used for methane conversion to higher hydrocarbons and hydrogen in a dielectric barrier discharge. The main goal of this study is to identify the metal catalyst components which can influence the reactions in room‐temperature plasma conditions. The catalysts supported by γ‐Al₂O₃ and zeolite (ZSM 5x) were prepared by the incipient wetness method with solutions containing the metal ions of the second component. Among the catalysts tested, only Pt and Fe catalysts showed a unique result of catalytic reaction in a reactor bed packed with glass beads.     

Plasma-Aided Cotton Bioscouring: Dielectric Barrier Discharge Versus Low-Pressure Oxygen Plasma

The hydrophobic cuticle of the cotton fiber has formed a natural barrier for pectinase to catalyze its substrates (pectins beneath the cuticle), thus resulting in an insufficient scouring for cotton. Two plasma-based treatments, dielectric barrier discharge (DBD) at atmospheric pressure and cold oxygen plasma at low pressure in a vacuum system, were used as the pretreatments prior to cotton bioscouring, aiming at increasing the accessibility of pectinases to the pectic substances on the cotton fiber. The effects of different processing parameters of DBD and oxygen plasmas on the wettability, whiteness and burst strength of pectinase-scoured cotton were determined and compared. Although both of the pretreatments could enhance cotton bioscouring, DBD might be more suitable for current bioscouring due to its continuous processing mode and lower requirements to the equipment.     

介质阻挡放电引发氮氧化物等离子体化学反应

在523 K介质阻挡放电条件下,研究了不同气体组分体系中NO的转化.实验表明,在无氧体系(NO/N2)中,转化的NO主要分解为N2和O2.在富氧(NO/O2/N2)条件下,由于NO和NO2的生成, NO的转化率最低.体系中加入C2H4(NO/C2H4/N2)时, NO转化率与NO/N2体系几乎一样,与NO相比,生成的O更易与C2H4作用,几乎没有NO2的生成.当C2H4和O2共存时(NO/O2/C2H4/N2),NO主要被氧化为NO2.当能量密度为125 J•L－1时, 与其它体系相比,NO/O2/C2H4/N2体系中NO转化率和NO2生成量最大,转化每个 NO分子能耗最小(61 eV).体系中C2H4主要被氧化为CO.四个体系中N2O的生成量都较少.讨论了介质阻挡放电条件下上述四个体系可能的反应机制.     

The Mutual Conversion of CO2 and CO in Dielectric Barrier Discharge (DBD)

Non-equilibrium plasma, which was engendered by dielectric barrier discharge (DBD) was used to analyze the mutual conversion between CO₂ and CO. The results showed that the conversion ratio of CO increased monotonously with the increasing voltage. But CO₂ was not so. Its conversion ratio reached maximum when the voltage was 3600 V in Ar system. It also showed that the existence of water molecules was more advanageous for the conversion of CO to CO₂ in Air system than in oxygen system, and the conversion ratio could reach 75.8% when the relative humidity was 100%. We also discussed the energy yield and energy efficiency, and the result was that high voltage and high concentration of reactant was disadvantageous for energy utilization.     

氧气常压介质阻挡放电的发射光谱及能量传递机理

为研究氧气常压介质阻挡放电中的物理化学行为, 以纯氧作为放电体系, 用发射光谱(optical emission spectroscopy)诊断技术分析了等离子体中可能存在的化学活性物种. 利用在500-950 nm范围的氧原子发射光谱计算出等离子体中的电子温度为(1.02±0.03) eV; 观测了760 nm处的具有清晰转动结构的氧气A带(atmospheric band)O2(b1∑+g-X3∑-g), 并用其转动结构计算了转动温度(气体温度)为(650±20) K; 在500-700 nm范围观测了氧气的第一负带系(first negative system) O+2(b4∑-g-a4∏u), 在190-240 nm范围观测了微弱但特征清晰的氧气的Hopfield带系O+2(c4∑+u-b4∑-g). 研究发现, 在氧气常压介质阻挡放电等离子体中存在多种激发态氧原子、激发态氧气分子、基态和激发态氧气分子离子等反应活性物种, 这些活性物种的形成涉及氧气分子的激发、解离和电离等多种过程, 每个过程都包含多个能量传递步骤, 氧分子解离产生的氧原子是导致一系列高激发态氧原子生成和氧气电离激发的主要因素.     

Elimination of Carbon Monoxide in the Gas Streams by Dielectric Barrier Discharge Systems with Mn Catalyst

Elimination of CO in air stream using the plasma catalytic reactors was investigated. Two plasma catalytic systems were evaluated in this study, one consisting of a catalyst-bed packed in plasma zone of a dielectric barrier discharge (DBD) reactor directly (CID reactor), and the other (CAD reactor) consisting of a catalyst-bed after a DBD reactor. The examined operating parameters in this study included applied voltage, discharge power, the lengths of plasma zone and catalyst-bed, and inlet CO concentration. It was found that the glass packed DBD reactor without catalyst cannot eliminate CO in air stream effectively. When MnO_x catalyst applied to DBD reactors, the removal of 1000 ppm CO can achieve to 97% by both type reactors. Under constant energy input condition, the CO removal of a CID reactor increased with the decrease of the initial CO concentration and the increase of the length of catalyst beds. In addition, the operating energy consumption of CID system was lower than that of CAD system.     

介质阻挡放电等离子体与吸附在CuZSM-5上的NO或NO/O2的相互作用

采用吸附和程序升温脱附(TPD)技术研究了介质阻挡放电等离子体对CuZSM-5催化剂上吸附的氮氧化物作用. 实验表明, 介质阻挡放电等离子体使催化剂表面吸附的NO及Cu活性位上吸附的NOx物种脱附, 并引发表面化学反应生成新的氮氧化物. 对于NO/N2体系, 介质阻挡放电等离子体与吸附在CuZSM-5上NO作用, 主要生成N2O和O2. 在富氧体系NO/O2/N2, 则生成较大量的N2O、NO2和NO. 等离子体预处理活性下降的CuZSM-5, 可明显提高其催化分解NO活性. 对比有或无介质阻挡放电等离子体预处理NO或NO/O2饱和吸附的CuZSM-5上的NO-TPD结果表明, 等离子体提高催化剂活性的原因与其使催化剂Cu活性位上吸附的NOx物种脱附有关.     

Ethylene Epoxidation in Cylindrical Dielectric Barrier Discharge: Effects of Separate Ethylene/Oxygen Feed

The effects of separate C₂H₄/O₂ feed and C₂H₄ feed position on the ethylene epoxidation reaction in an AC cylindrical dielectric barrier discharge reactor were investigated. The highest EO selectivity of 34?% and EO yield of 7.5?%, as well as the lowest power consumption of 1.72?×?10^?16 Ws/molecule of EO produced, were obtained at a C₂H₄ feed position of 0.25, an O₂/C₂H₄ feed molar ratio of 1/4, an applied voltage of 13?kV, an input frequency of 550?Hz, and a total feed flow rate of 75?cm³/min. The results demonstrated, for the first time, that the separate feed of C₂H₄ and O₂ could provide better ethylene epoxidation performance in terms of higher EO selectivity and yield, and lower power consumption, as compared to the mixed feed. All undesired reactions including C₂H₄ cracking, dehydrogenation, oxidation, and coupling reactions are lowered by the ethylene separate feed because of a decrease in opportunity of ethylene molecules to be activated by generated electrons.     

Destruction of 2,4 Dichlorophenol in an Atmospheric Pressure Dielectric Barrier Discharge in Oxygen

The processes of degradation of 2,4-dichlorophenol (2,4-DCP) under the action of atmospheric pressure of dielectric barrier discharge (DBD) in oxygen were studied. It was shown that the degradation of 2,4-DCP proceeds efficiently. Degree of decomposition reaches 90%. The degradation kinetics of 2,4-DCP obeys the formal first-order kinetic law on concentration of 2,4-DCP. The effective rate constants depend weakly on the experimental conditions and are equal to ~0.2 s^?1. Based on experimental data, the energy efficiency of decomposition of 2,4-DCP was determined. Depending on the conditions, the energy efficiency was in the range of (8–90) × 10^?3 molecules per 100 eV. The composition of the products was studied by gas chromatography (GC), gas chromatography–mass spectrometry (GC–MS), energy-dispersive X-ray spectroscopy (EDX), attenuated total reflection-fourier transform infrared (ATR-FTIR) spectroscopy, electron spin resonance (ESR) spectroscopy and UV/Visible spectroscopy. It was shown that about ~20% of 2,4-DCP is converted to CO₂, while the other part forms an organic film on the reactor wall. The substance formed is close to the carboxylic acids in chemical composition and exhibits electrical conductivity and paramagnetic properties. Almost all of the chlorine contained in the 2,4-DCP is released into the gas phase. The active species of the afterglow react with liquid hexane, forming the products of its oxidation. Some assumptions regarding the pathway of the process are discussed.     

Deposition of Gold Nanoparticles on Polypropylene Nonwoven Pretreated by Dielectric Barrier Discharge and Diffuse Coplanar Surface Barrier Discharge

The aim of this study was to examine and compare the potentials of two different ambient air plasma treatments: volume dielectric barrier discharge and diffuse coplanar surface barrier discharge, for the activation of polypropylene (PP) nonwovens surface. This was done in order to enhance the deposition of gold nanoparticles (AuNPs) onto PP surface. AuNPs were attached onto PP surface from colloidal solution prepared without stabilizers. Scanning electron microscopy, atomic force microscopy, attenuated total reflection-Fourier transform infrared spectroscopy, water absorption, and AuNPs uptake were used to assess the surface changes due to the plasma treatment, and to evaluate the durability of the achieved treatment effects. Finally, as a very important aspiration of the research, antibacterial activity of AuNPs loaded PP nonwovens against pathogens Staphylococcus aureus and Escherichia coli was evaluated in vitro. The plasma modified PP nonwovens have highly improved wetting and sorption properties. The PP nonwovens loaded with 17–62 mg/kg AuNPs exhibit antibacterial activity against tested pathogens. Surprisingly, this activity was enhanced by the first sample rinsing.     

Quantitative Analysis of Ozone and Nitrogen Oxides Produced by a Low Power Miniaturized Surface Dielectric Barrier Discharge: Effect of Oxygen Content and Humidity Level

Plasma Chemistry and Plasma Processing - This study presented a quantitative evaluation of the performance of a low power miniaturized SDBD source for the production of ozone and nitrogen oxides as...     

Influence of Helium on the Conversion of Methane and Carbon dioxide in a Dielectric Barrier Discharge

We have studied the production of synthesis gas and other hydrocarbons in a dielectric barrier discharge using mixtures of helium, methane and carbon dioxide. It was found that helium has a significant influence on the discharge, decreasing the breakdown voltage and increasing the rate of conversion of CH₄ and CO₂. However it also decreases the selectivities and the range of stable operating conditions for the discharge. The main products obtained were H₂, CO, C₂H₆ and C₃H₈ but traces of other hydrocarbon, carbon deposition and the formation of condensable products were also detected. The rate of conversion and conversion abilities were obtained by fitting the conversion results to a model.     

Direct Oxidation of Methane to Methanol Over Cu-Based Catalyst in an AC Dielectric Barrier Discharge

In this paper, the conversion of methane to methanol on CuO/Al₂O₃ and Mo–CuO/Al₂O₃ catalysts in a plasma reactor was tested. A comparison between catalytic and plasma-catalytic systems had been made in tested temperature range of 50–300°C. Experimental results showed that plasma-catalytic system demonstrated a much better methane conversion than catalytic system in tested temperature range and Mo–CuO/Al₂O₃ revealed a higher catalytic activity than CuO/Al₂O₃ for methanol synthesis. Furthermore, an Arrhenius plot was made in order to deduce the mechanism of plasma activation, which revealed that the presence of plasma decreased the activation energy for both catalysts. In the case of Mo-CuO/Al₂O₃ catalyst, the enhanced activity for methanol synthesis was assumed due to the oxygen vacancies on Mo–CuO/Al₂O₃ catalyst, which can utilize plasma-induced species to improve the catalytic efficiency.     

介质阻挡放电中OH自由基对甲醛脱除的影响

对管线式介质阻挡放电中的甲醛脱除进行了实验研究, 测量了介质阻挡放电产生的OH (A²Σ→X ²Π, 0-0)自由基发射光谱. 研究了在一个大气压下不同放电峰值电压、放电频率、添加氩气和氧气时甲醛脱除率与OH自由基发射光谱强度的变化关系. 实验结果表明: 在氮气含甲醛体系中, 提高放电峰值电压、放电频率和增大氩气含量时, 甲醛脱除率随OH (A²Σ→X ²Π, 0-0)自由基发射光谱强度的增强而提高; 当在氮气含甲醛体系中增大氧气含量时, 甲醛脱除率随OH (A²Σ→X ²Π, 0-0)自由基发射光谱强度的减弱而降低. 在11.5 kV放电峰值电压和9 kHz放电频率下, 氮气含甲醛体系中甲醛脱除率达93.8%.     

高频介质阻挡放电烟气脱硫研究

采用高频介质阻挡放电的方式产生低温等离子体,研究在不加入NH₃的情况下流动态SO₂的去除情况.实验表明,在输入电压为12 kV,SO₂浓度为5400 mg/m³,气体流量为0.36 m³/h,相对湿度为55%时,脱硫率可达到70%以上;水气的存在对SO₂的去除有较大的促进作用,升高电压和增加O₂量对脱硫率的促进作用有限.对实验结果进行了解释,并提出了反应机理.     

Characteristics and Analysis of the Mechanism of NO Removal in Dielectric Barrier Discharge Plasma by Hydrocarbons at Varying Temperatures

Theoretical analysis of the electron energy distribution function by the Boltzmann equation and experimental investigations into the effect of hydrocarbons (methane, acetylene and ethylene) on NO removal efficiency are presented at varying temperatures. The experiments were carried out using dielectric barrier discharge plasmas at 298, 363 and 403 K, respectively. Ethylene greatly enhanced NO conversion because of its stronger affinity for the O radical. NO conversion in the presence of methane and acetylene was much lower than with ethylene at all temperatures. With an increase in temperature, E/N increased, the molecular ionization strengthened and the electron mean energy increased, resulting in more active species generated through ionizing and exciting reactions at the same energy density. High-energy electrons accelerated the decomposition rate of hydrocarbons, and the rate constants of some major reactions were increased, producing more strong oxidizing radicals (HO₂). Therefore, NO removal efficiency was increased when the temperature was higher.     

The Destruction of Carbon Tetrachloride Dissolved in Water in a Dielectric Barrier Discharge in Oxygen

The kinetics of decomposition of tetrachloromethane (TCM) in its aqueous solutions and the kinetics of decomposition products formation was investigated under the action of DBD at atmospheric pressure in oxygen in a falling-flow reactor. The range of initial concentrations of TCM was 25–325 μmol/l, the discharge power—2–11 W and O₂ flow rates—1–3 cm³/s. It is shown that the kinetics of the TCM decomposition can be described by the equation of pseudo-first kinetic order. The rate constant depended weakly on the discharge parameters and was?~?5 s^?1. The energy efficiency of the decomposition, depending on the parameters, was 0.1–1.3 molecules per 100 eV. When the residence time of the solution with the discharge zone is more than 1 s, it is possible to achieve almost 100% degree of TCM decomposition. It is shown that the main products of the TCM decomposition in the liquid phase are aldehydes and Cl^? ions, and in the gas phase—the molecules CO and CO₂. The results for energy efficiency are compared with the results obtained in other AOP’s processes (Fenton process, photocatalytic process, the radiation process by the action of high-energy electron flux). It is shown that the action of the DBD is more effective than the action of the above processes.