Mössbauer study of iron oxide modified montmorillonite

Montmorillonite particles were modified by iron oxides using the precipitation process with the aim to monitor the differences in the structural and magnetic properties of intercalated and adsorbed Fe³⁺. The Mössbauer spectra recorded at 5 K in zero and 6 T external fields, IR spectra and TG curves measured in zero and 32 mT fields identified the ferrihydrite pillars in an interlayer space of the montmorillonite structure and γ-Fe₂O₃ nanoparticles adsorbed on the mineral surface. The temperature dependent Mössbauer spectra (25–300 K) reflect the superparamagnetic behaviour of maghemite nanoparticles and ferrihydrite pillars with the blocking temperatures of about 80 and 25 K, respectively.     

Synthesis and characterization of nanostructure hydrous iron–titanium binary mixed oxide for arsenic sorption

Synthesis of nanostructure hydrous iron–titanium binary mixed oxide (NHITBMO) had been reported by a simple method, and characterized by the X-ray diffraction (XRD), thermal analysis, transmission electron microscope (TEM), Föurier Transform Infrared (FTIR), surface area, and zero surface charge pH (pHzpc). The synthetic oxide was hydrated and microcrystalline with 77.8 m² g^?1 BET surface area. The particle size (nm) calculated using XRD peak table and TEM image was ~10–13 and 6–8, respectively. The pH_zpc value was 6.0 (±0.05) for the oxide. The NHITBMO showed pH dependent good sorption affinity for arsenic from the aqueous solution and, the Langmuir monolayer capacity (mg g^?1) was 80.0 and 14.6, respectively, for the As(III) and As(V). The pseudo-second order equation described the room temperature arsenic sorption kinetic data well. The minimum dose required was 1.6 g NHITBMO per L of water (As_total = 0.24 mg L^?1) to reduce the arsenic level below 0.01 mg L^?1 in batch treatment process.     

Mössbauer study of Cu1−xZnxFe2O4 catalytic materials

In the present work, we have synthesized and characterized magnetic nanoparticles of maghemite γ-Fe₂O₃ to study their structural and magnetic properties. For the preparation, magnetite precursor, were oxidized by adjusting the pH = 3.5 at about 80 °C in an acid medium, The mean size of the maghemite particles calculated from the X-ray diffractogram was around 5.7 nm. Mössbauer spectroscopy measurements at room temperature show their superparamagnetic behavior. Furhermore, Mössbauer measurements were carried out at 77 K and 4.2 K in order to find the typical hyperfine fields of the maghemite. Magnetite phase was not found. FC and ZFC magnetization curves measured at 500 Oe indicate a blocking temperature of 105.3 K. The magnetization measurements also show almost zero coercivity at RT. TEM images show nanoparticles with diameter smaller than 10 nm, which are in good agreement with the X-ray pattern and the fitting of the magnetization data.     

Fabrication and electrochemical investigation of MWO<Subscript>4</Subscript> (M = Co,Ni) nanoparticles as high-performance anode materials for lithium-ion batteries

In this work, the MWO₄ (M = Co, Ni) nanoparticles were successfully synthesized by a facile one-step hydrothermal method and used as novel anode materials for LIBs. The micromorphology of obtained CoWO₄ and NiWO₄ was uniform nanoparticles with the size of ~60 and ~40 nm, respectively, by structural characterization including X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). When tested as lithium-ion battery anode, CoWO₄ nanoparticles exhibited a stabilized reversible capacity of 980 mA h g^?1 at 200 mA g^?1 after 120 cycles and 632 mA h g^?1 at 1000 mA g^?1 even after 400 cycles. And, the discharge capacity was as high as 550 mA h g^?1 at the 400th cycle for NiWO₄ nanoparticles. The excellent electrochemical performance could be attributed to the unique nanoparticles structure of the materials, which can not only shorten the diffusion length for electrons and lithium ions but also provide a large specific surface area for lithium storage.     

Phenol adsorption on surface-functionalized iron oxide nanoparticles: modeling of the kinetics,isotherm, and mechanism

Phenol adsorption from aqueous solution was carried out using uncoated and methyl acrylic acid (MAA)-coated iron oxide nanoparticles (NPs), having size <10 nm, as adsorbents. Batch adsorption studies revealed that the phenol removal efficiency of MAA-coated NPs (950 mg g^?1) is significantly higher than that of uncoated NPs (550 mg g^?1) under neutral to acidic conditions. However, this improvement disappears above pH 9. The adsorption data under optimized conditions (pH 7) were modeled with pseudo-first- and pseudo-second-order kinetics and subjected to Freundlich and Langmuir isotherms. The analysis determined that pseudo-second-order kinetics and the Freundlich model are appropriate for both uncoated and MAA-coated NPs (all R ² > 0.98). X-ray photoelectron spectroscopy analysis of pristine and phenol-adsorbed NPs revealed core-level binding energy and charge for Fe(2s) and O(1s) on the NP surfaces. The calculations suggest that phenol adsorption onto MAA-coated NPs is a charge transfer process, where the adsorbate (phenol) acts as an electron donor and the NP surface (Fe, O) as an electron acceptor. However, a physisorption process appears to be the relevant mechanism for uncoated NPs.     

Synthesis and electrochemical investigation of highly dispersed ZnO nanoparticles as anode material for lithium-ion batteries

Highly dispersed ZnO nanoparticles were prepared by a versatile and scalable sol-gel synthetic technique. High-resolution transmission electronic microscopy (HRTEM) showed that the as-prepared ZnO nanoparticles are spherical in shape and exhibit a uniform particle size distribution with the average size of about 7 nm. Electrochemical properties of the resulting ZnO were evaluated by galvanostatic discharge/charge cycling as anode for lithium-ion battery. A reversible capacity of 1652 mAh g^?1 was delivered at the initial cycle and a capacity of 318 mAh g^?1 was remained after 100 cycles. Furthermore, the system could deliver a reversible capacity of 229 mAh g^?1 even at a high current density of 1.5 C. This outstanding electrochemical performance could be attributed to the nano-sized features of highly dispersed ZnO particles allowing for the better accommodation of large strains caused by particle expansion/shrinkage along with providing shorter diffusion paths for Li⁺ ions upon insertion/deinsertion.     

Studies on kinetics and thermodynamics of ion adsorption reactions by applications of short-lived radioactive tracer isotopes

The short-lived radiotracer isotopes were applied to study the kinetics and thermodynamic feasibility of iodide as well as bromide ion adsorption reactions using industrial-grade resin materials. Free energy of activation (ΔG ^?) and energy of activation (E _a) were calculated by using Arrhenius equation, enthalpy of activation (ΔH ^?), and entropy of activation (ΔS ^?) calculated by using the Eyring-Polanyi equation. These parameters were used to predict the thermodynamic feasibility of the two ion adsorption reactions performed by using Dowex SBR LC and Indion-810 resins. It was observed that during iodide ion adsorption reactions, the values of energy of activation (?18.79 kJ mol^?1), enthalpy of activation (?21.37 kJ mol^?1), free energy of activation (58.13 kJ mol^?1), and entropy of activation (?0.26 kJ K^?1 mol^?1) calculated for Indion-810 resins were lower than the respective values of ?4.28 kJ mol^?1, ?6.87 kJ mol^?1, 64.97 kJ mol^?1, and ?0.23 kJ K^?1 mol^?1 calculated for Dowex SBR LC under similar experimental conditions. Identical trends were observed for the two resins during bromide ion adsorption reactions. The low values of different thermodynamic parameters obtained for Indion-810 resins during both the ion adsorption reactions indicate that the reactions are thermodynamically more feasible using Indion-810 resins as compared to Dowex SBR LC resins. It is expected here that the present nondestructive technique can be extended further for different ions in the solution in order to predict the thermodynamic feasibility of different ion adsorption reactions for the range of resins which are widely used for treatment of industrial waste water effluent.     

A novel synthesis of size-controllable mesoporous NiMoO<Subscript>4</Subscript> nanospheres for supercapacitor applications

A novel hydrothermal emulsion method is proposed to synthesize mesoporous NiMoO₄ nanosphere electrode material. The size of sphere-shaped NiMoO₄ nanostructure is controlled by the mass ratio of water and oil phases. Nickel acetate tetrahydrate and ammonium heptamolybdate were used as nickel and molybdate precursors, respectively. The resultant mesoporous NiMoO₄ nanospheres were characterized by X-ray diffraction, N₂ adsorption and desorption, scanning electron microscopy, and transmission electron microscopy. The electrochemical performances were evaluated by cyclic voltammetry (CV), cyclic chronopotentiometry (CP), and electrochemical impedance spectroscopy (EIS) in 6 M KOH solution. The typical mesoporous NiMoO₄ nanospheres exhibit the large specific surface area of 113 m² g^?1 and high specific capacitance of 1443 F g^?1 at 1 A g^?1, an outstanding cyclic stability with a capacitance retention of 90 % after 3000 cycles of charge-discharge at a current density of 10 A g^?1, and a low resistance.     

Cu-supported carbon networks containing SnO<Subscript>2</Subscript> as three-dimensional anodes for lithium-ion batteries

Cu-supported SnO₂@C composite coatings constructed by interconnected carbon-based porous branches were fabricated by annealing Cu foils with films formed by knife coating DMF solution containing SnCl₂, polyacrylonitrile (PAN), and poly(methyl methacrylate) (PMMA) on their surface in vacuum. The carbon-based porous branches consist of amorphous carbon matrices, SnO₂ nanoparticles with a size of 30–100 nm mainly encapsulated inside, and many micropores with a size of 1–5 nm. The three-dimensional (3D) porous network structures of the SnO₂@C composite were achieved by volatilization of PMMA and pyrolysis of SnCl₂. The SnO₂@C composite coatings demonstrate good cyclic performance with a high reversible capacity of 642 mA h g^?1 after 100 cycles at a current density of 50 mA g^?1 without apparent capacity fading during cycling and excellent rate performance with a capacity of 276 mA h g^?1 at a high current density up to 10 A g^?1.     

N-doped graphene/Bi nanocomposite with excellent electrochemical properties for lithium–ion batteries

N-doped graphene/Bi nanocomposite was prepared via a two-step method, combining the gas/liquid interface reaction with the rapid heat treatment method. The as-prepared sample was characterized by X-ray diffraction (XRD), field-emission scanning electron microscope (FESEM), X-ray photoelectron spectroscopy (XPS), and elemental analyzer. The XRD, FESEM, XPS, and elemental analysis results confirm the successful synthesis of N-doped graphene/Bi nanocomposite. As a result, the prepared N-doped graphene/Bi nanocomposite as an anode material for lithium-ion batteries delivers excellent electrochemical performance. A high lithium storage capacity of about 522 mAh g^?1 in the voltage range of 0.01–3.5 V is obtained. After 50 cycles at different current densities from 50 to 1000 mA g^?1, the specific capacity can still remain 386 mAh g^?1. Even at the high current density of 1000 mA g^?1, the N-doped graphene/Bi nanocomposite can still deliver a specific capacity of 218 mAh g^?1. The excellent electrochemical performance of the N-doped graphene/Bi nanocomposite is supposed to benefit from the high electronic conductivity of nitrogen-doped graphene and the synergistic effect of bismuth nanoparticles and nitrogen-doped graphene.     

The effects of vacuum annealing on the structure and surface chemistry of iron nanoparticles

In order to increase the longevity of contaminant retention, a method is sought to improve the corrosion resistance of iron nanoparticles (INP) used for remediation of contaminated water and thereby extend their industrial lifetime. A multi-disciplinary approach was used to investigate changes induced by vacuum annealing (<5 × 10^?8 mbar) at 500 °C on the bulk and surface chemistry of INP. The particle size did not change significantly as a result of annealing but the surface oxide thickness decreased from an average of 3–4 nm to 2 nm. BET analysis recorded a decrease in INP surface area from 19.0 to 4.8 m² g^?1, consistent with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations which indicated the diffusion bonding of previously discrete particles at points of contact. X-ray diffraction (XRD) confirmed that recrystallisation of the metallic cores had occurred, converting a significant fraction of poorly crystalline iron to bcc α-Fe and Fe₂B phases. X-ray photoelectron spectroscopy (XPS) indicated a change in the surface oxide stoichiometry from magnetite (Fe₃O₄) towards wüstite (FeO) and the migration of boron and carbon to the particle surfaces. The improved core crystallinity and the presence of passivating impurity phases at the INP surfaces may act to improve the corrosion resistance and reactive lifespan of the vacuum annealed INP for environmental applications.     

Solid-stabilized emulsion formation using stearoyl lactylate coated iron oxide nanoparticles

Iron oxide nanoparticles can exhibit highly tunable physicochemical properties that are extremely important in applications such as catalysis, biomedicine and environmental remediation. The small size of iron oxide nanoparticles can be used to stabilize oil-in-water Pickering emulsions due to their high energy of adsorption at the interface of oil droplets in water. The objective of this work is to investigate the effect of the primary particle characteristics and stabilizing agent chemistry on the stability of oil-in-water Pickering emulsions. Iron oxide nanoparticles were synthesized by the co-precipitation method using stoichiometric amounts of Fe²⁺ and Fe³⁺ salts. Sodium stearoyl lactylate (SSL), a Food and Drug Administration approved food additive, was used to functionalize the iron oxide nanoparticles. SSL is useful in the generation of fat-in-water emulsions due to its high hydrophilic–lipophilic balance and its bilayer-forming capacity. Generation of a monolayer or a bilayer coating on the nanoparticles was controlled through systematic changes in reagent concentrations. The coated particles were then characterized using various analytical techniques to determine their size, their crystal structure and surface functionalization. The capacity of these bilayer coated nanoparticles to stabilize oil-in-water emulsions under various salt concentrations and pH values was also systematically determined using various characterization techniques. This study successfully demonstrated the ability to synthesize iron oxide nanoparticles (20–40 nm) coated with SSL in order to generate stable Pickering emulsions that were pH-responsive and resistant to significant destabilization in a saline environment, thereby lending themselves to applications in advanced oil spill recovery and remediation.     

Study of maghemite nanoparticles as prepared and coated with DMSA using Mössbauer spectroscopy with a high velocity resolution

Study of maghemite nanoparticles, native and coated with DMSA as magnetic fluid for biomedical applications, was carried out using Mössbauer spectroscopy with a high velocity resolution at 295 and 90 K. The obtained results demonstrated differences in Mössbauer hyperfine parameters for uncoated and DMSA-coated nanoparticles which were related to the interactions of DMSA molecules with Fe^3+? ions on maghemite nanoparticle’s surface.     

A facile low temperature synthesis of TiO2 nanorods for high efficiency dye sensitized solar cells

Titania (TiO₂) nanorods have been synthesized with controlled size for dye-sensitized solar cells (DSSCs) via hydrothermal route at low hydrothermal temperature of 100 °C for 24 h. The titania nanorods were characterized using XRD, SEM, TEM/HRTEM, UV-vis Spectroscopy, FTIR and BET specific surface area (S _BET), as well as pore-size distribution by BJH. The results indicated that the bulk traps and the surface states within the TiO₂ nanorods films have enhanced the efficiency of DSSCs. The size of the titania nanorods was 6.7 nm in width and 22 nm in length. The high surface area can provide more sites for dye adsorption, while the fast photoelectron-transfer channel can enhance the photogenerated electron transfer to complete the circuit. The specific surface area S _BET was 77.14 m²?g^?1 at the synthesis conditions. However, the band gap energy of the obtained titania nanorods was 3.2 eV. The oriented nanorods with appropriate lengths are beneficial in improving the electron transport property and thus leading to the increase of photocurrent, together enhancing the power conversion efficiency. A nearly quantitative absorbed photon-to-electrical current conversion achieved upon excitation at wave length of 550 nm and the power efficiency was enhanced from 5.6 % for commercial TiO₂ nanoparticles Degussa (P25) cells to 7.2 % for TiO₂ nanorods cells under AM 1.5 illumination (100 mW?cm^?2). The TiO₂ cells performance was improved due to their high surface area, hierarchically mesoporous structures and fast electron-transfer rate compared with the Degussa (P25).     

Oxalate precursor preparation of Li1.2Ni0.13Co0.13Mn0.54O2 for lithium ion battery positive electrode

Li_1.2Ni_0.13Co_0.13Mn_0.54O₂ powders have been prepared through co-precipitation of metal oxalate precursor and subsequent solid state reaction with lithium carbonate. X-ray diffraction pattern shows that the massive rock-like structure has a good layered structure and solid solution characteristic. Scanning electron microscope and transition electron microscope images reveal that the Li_1.2Ni_0.13Co_0.13Mn_0.54O₂ composed of nanoparticles have the size of 1–2 μm. As a lithium ion battery positive electrode, the Li_1.2Ni_0.13Co_0.13Mn_0.54O₂ has an initial discharge capacity of 285.2 mAh g^?1 at 0.1 C within 2.0–4.8 V. When the cutoff voltage is decreased to 4.6 V, the cycling stability of product can be greatly improved, and a discharge capacity of 178.5 mAh g^?1 could be retained at 0.5 C after 100 cycles. At a high charge–discharge rate of 5 C (1,000 mAh g^?1), a stable discharge capacity of 121.4 mAh g^?1 also can be reached. As the experimental results, the Li_1.2Ni_0.13Co_0.13Mn_0.54O₂ prepared from oxalate precursor route is suitable as lithium ion battery positive electrode.     

A Validated Spectrofluorimetric Method for the Determination of Citalopram in Bulk and Pharmaceutical Preparations Based on the Measurement of the Silver Nanoparticles-Enhanced Fluorescence of Citalopram/Terbium Complexes

A simple, sensitive, and accurate spectrofluorimetric method was developed for the determination of citalopram in bulk and pharmaceutical preparations. The method is based on the enhancement of the weak fluorescence signal (FL) of the Tb (III)-citalopram system in the presence of silver nanoparticles. Fluorescence intensities were measured at 555 nm after excitation at 281 nm. Prepared silver nanoparticles (AgNPs) were characterized by UV-Visible spectra and transmission electron microscopy (TEM). Various factors affecting the formation of citalopram-Tb (III)-AgNPs complexes were studied and optimized. The fluorescence intensity versus concentration plot was linear over the range 0.02–14 μg?mL^?1, with an excellent correlation coefficient of 0.9978. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 7.15?×?10^?6?μg?mL^?1 and 2.38?×?10^?5?μg?mL^?1 respectively. The proposed method was found to have good reproducibility with a relative standard deviation of 3.66 % (n?=?6). The interference effects of common excipients found in pharmaceutical preparations were studied. The developed method was validated statistically by performing recoveries studies and successfully applied for the assay of citalopram in bulk powder and pharmaceutical preparations. Percent recoveries were found to range from 98.98 % to 100.97 % for bulk powder and from 96.57 % to 101.77 % for pharmaceutical preparations.     

Aerosol characterization and lung deposition of synthesized TiO2 nanoparticles for murine inhalation studies

This study presents a novel exposure protocol for synthesized nanoparticles (NPs). NPs were synthesized in gas phase by thermal decomposition of metal alkoxide vapors in a laminar flow reactor. The exposure protocol was used to estimate the deposition fraction of titanium dioxide (TiO₂) NPs to mice lung. The experiments were conducted at aerosol mass concentrations of 0.8, 7.2, 10.0, and 28.5 mg m^?3. The means of aerosol geometric mobility diameter and aerodynamic diameter were 80 and 124 nm, and the geometric standard deviations were 1.8 and 1.7, respectively. The effective density of the particles was approximately from 1.5 to 1.7 g cm^?3. Particle concentration varied from 4 × 10⁵ cm^?3 at mass concentrations of 0.8 mg m^?3 to 12 × 10⁶ cm^?3 at 28.5 mg m^?3. Particle phase structures were 74% of anatase and 26% of brookite with respective crystallite sized of 41 and 6 nm. The brookite crystallites were approximately 100 times the size of the anatase crystallites. The TiO₂ particles were porous and highly agglomerated, with a mean primary particle size of 21 nm. The specific surface area of TiO₂ powder was 61 m² g^?1. We defined mice respiratory minute volume (RMV) value during exposure to TiO₂ aerosol. Both TiO₂ particulate matter and gaseous by-products affected respiratory parameters. The RMV values were used to quantify the deposition fraction of TiO₂ matter by using two different methods. According to individual samples, the deposition fraction was 8% on an average, and when defined from aerosol mass concentration series, it was 7%. These results show that the exposure protocol can be used to study toxicological effects of synthesized NPs.     

Li+ transportation kinetics of FeF3 · 0.33H2O/C nanocomposite synthesized by one-step solid state method

A new cathode material for lithium ion battery FeF₃?·?0.33H₂O/C was synthesized successfully by a simple one-step chemico-mechanical method. It showed a noticeable initial discharge capacity of 233.9 mAh g^?1 and corresponding charge capacity of 186.4 mAh g^?1. A reversible capacity of ca.157.4 mAh g^?1 at 20 mA g^?1 can be obtained after 50 charge/discharge cycles. To elucidate the lithium ion transportation in the cathode material, the methods of electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT) were applied to obtain the lithium diffusion coefficients of the material. Within the voltage level of 2.05–3.18 V, the method of EIS showed that \( {D}_{{\mathrm{Li}}^{+}} \) varied in the range of 1.2?×?10^?13?~?3.6?×?10^?14 cm² s^?1 with a maximum of 1.2?×?10^?13 cm² s^?1 at 2.5 V. The method of GITT gave a result of 8.1?×?10^?14?~?1.2?×?10^?15 cm² s^?1. The way and the range of the variation for lithium ion diffusion coefficients measured by the GITT method show close similarity with those obtained by the EIS method. Besides, they both reached their maximum at a voltage level of 2.5 V.     

Structural and magnetic studies of the Zn-substituted magnesium ferrite chromate

The formation of iron oxide nanoparticles in course of a sol-gel preparation process was traced by UV/Vis and ⁵⁷Fe Mössbauer absorption spectroscopy. Samples were extracted at different stages of the reaction. While spectra measured on samples extracted at low reactor temperatures showed the starting materials Fe(acac)₃ diluted in benzyl alcohol undergoing slow paramagnetic relaxation, a sample extracted at a reactor temperature of 180 °C gave clear evidence for emerging iron oxide nanoparticles. A prolonged stay at 200 °C results in a complete transformation from Fe(acac)₃ to maghemite nanoparticles.     

Synthesis,characterization, and ecotoxicity of CeO<Subscript>2</Subscript> nanoparticles with differing properties

CeO₂ nanoparticles with various characteristics find an increasing number of applications in the electronic, medical, and other industries and are therefore likely released in the environment. This calls for investigations linking the physicochemical properties of these particles with their potential environmental impacts. In this study, CeO₂ nanoparticle powders were prepared using three different precursors [Ce(NO₃)₃, CeCl₃, and Ce(CH₃COO)₃] and annealing temperatures (300, 500, and 700 °C). This procedure resulted in nine different types of nanoparticles with differing size (5–90 nm), morphology, surface Ce³⁺/Ce⁴⁺ ratio, and slightly different crystal structures as characterized using transmission electron microscopy, dynamic light scattering, X-ray photoelectron spectroscopy, and X-ray diffraction measurements with Rietveld refinement. These CeO₂ nanoparticles underwent toxicity testing at concentrations up to 64 mg L^?1 using Daphnia magna. Toxic effects were observed for three particle types with EC50 values between 5 and 64 mg L^?1. No clear correlation was observed between the physicochemical properties (size, shape, oxygen occupancy, Ce³⁺/Ce⁴⁺ ratio) of the nanoparticles and their toxicity. However, toxicity was correlated with the amount of Ce remaining suspended in the test medium after 24 h. This indicated that toxic effects may depend on the colloidal stability of CeO₂ nanoparticles during the first day of exposure. Therefore, being readily suspended and remaining stable for several days in the aquatic media increases the likelihood that CeO₂ nanoparticles will cause unwanted adverse effects.