Thermal Stability of Structure and Properties of Gradient and Gradient-Layered Coatings of the Ti–Al–Si–Cu–N System

Russian Physics Journal - Using the methods of dark-field electron microscopy analysis, energy-dispersive X-ray microanalysis, hardness measurements and scratch testing, the variations of elemental...     

Structure and Magnetoresistance of Co–Gd and Al–Co–Gd Alloy Films

Technical Physics - Structural data and dependences of the film resistance on magnetic field strength R(H) are presented for Co–Gd and Al–Co–Gd alloy films obtained by vacuum...     

Nonlinear dynamical symmetries of Smorodinsky–Winternitz and and Fokas–Lagerstorm systems

General solutions of the Smorodinsky–Winternitz system and the Fokas–Lagerstorm system, which are superintegrable in two-dimensional Euclidean space, are obtained using the algebraic method (structure function). Their dynamical symmetries, which are governed by deformed angular momentum algebras, are revealed.     

Superconductivity of Y–Ba–Cu–O and substituted systems

Superconductivity of Y-Ba-Cu-O system is studied in the composition 2:2:3 and 1:2:3 of Y:Ba:Cu. The effect of replacement of Y or Ba by divalent Sr and Ca, trivalent Ce and tetravalent Zr is studied. X-ray diffraction, SEM and TEM techniques are used for materials characterization. Superconducting transition temperatures are measured resistively. Rapid resistance drop observed above 230 K in Y-Ba-Sr-Cu-O and Y-Ba-Ca-Cu-O systems indicate the possible existence of superconductivity above 230 K. Substitution of Ce in place of Y is found to reduce the onset Tc from 95 K to 80 K. For the first time, replacement of Cu by Zr in Y-Ba-Cu-O has yielded the onset Tc of about 105 K.     

Luminescence of II–VI and III–V nanostructures

Photoluminescence of HgCdTe epitaxial films and nanostructures and electroluminescence of InAs(Sb,P) light-emitting diode (LED) nanoheterostructures were studied. For HgCdTe-based structures, the presence of compositional fluctuations, which localized charge carriers, was established. A model, which described the effect of the fluctuations on the rate of the radiative recombination, the shape of luminescence spectra and the position of their peaks, was shown to describe experimental photoluminescence data quite reasonably. For InAs(Sb,P) LED nanoheterostructures, at low temperatures (4.2–100 K) stimulated emission was observed. This effect disappeared with the temperature increasing due to the resonant ‘switch-on’ of the Auger process involving transition of a hole to the spin-orbit-splitted band. Influence of other Auger processes on the emissive properties of the nanoheterostructures was also observed. Prospects of employing II–VI and III–V nanostructures in light-emitting devices operating in the mid-infrared part of the spectrum are discussed.     

Effect of irradiation on microstructure and hardening of Cr–Fe–Ni–Mn high-entropy alloy and its strengthened version

ABSTRACT

A single-phase fcc high-entropy alloy (HEA) of 20%Cr–40%Fe–20%Mn–20%Ni composition and its strength with yttrium and zirconium oxides version was irradiated with 1.4?MeV Ar ions at room temperature and mid-range doses from 0.1 to 10 displacements per atom (dpa). Transmission electron microscopy (TEM), scanning transmission electron microscopy with energy dispersive X-ray spectrometry (STEM/EDS) and X-ray diffraction (XRD) were used to characterise the radiation defects and microstructural changes. Nanoindentation was used to measure the ion irradiation effect on hardening. In order to understand the irradiation effects in HEAs and to demonstrate their potential advantages, a comparison was performed with hardening behaviour of 316 austenitic stainless steel irradiated under an identical condition. It was shown that hardness increases with irradiation dose for all the materials studied, but this increase is lower in high-entropy alloys than in stainless steel.     

Improvement of microstructure and magnetic properties of Nd–Fe–B alloys by Nb and Co additions

In order to establish the role of niobium on the hydrogenation, disproportionation, desorption and recombination (HDDR) behavior of near-stoichiometric alloys, two alloys: NdI3Fe8OB7 and Nd13Fe78Nb1Co1B7 (at%) were investigated before, during and after the HDDR process. The microstructure of the as-cast Nb-free alloy before employing the HDDR process was found to consist of three phases, the matrix Nd₂Fe₁₄B (φ) phase, Nd-rich phase and a significant amount of free iron; whereas, the microstructure of the Nb-containing alloy consisted of only the first two phases.     

Precipitation and fracture behaviour of Fe–Mn–Ni–Al alloys

The effects of Al addition on the precipitation and fracture behaviour of Fe–Mn–Ni alloys were investigated. With the increasing of Al concentration, the matrix and grain boundary precipitates changed from L1₀ θ-MnNi to B2 Ni₂MnAl phase, which is coherent and in cube-to-cube orientation relationship with the α′-matrix. Due to the suppression of the θ-MnNi precipitates at prior austenite grain boundaries (PAGBs), the fracture mode changed from intergranular to transgranular cleavage fracture. Further addition of Al resulted in the discontinuous growth of Ni₂MnAl precipitates in the alloy containing 4.2?wt.% Al and fracture occurred by void growth and coalescence, i.e. by ductile dimple rupture. The transition of the fracture behaviour of the Fe–Mn–Ni–Al alloys is discussed in relation to the conversion of the precipitates and their discontinuous precipitation behaviour at PAGBs.     

Hardness and microstructural variation of Al–Mg–Mn–Sc–Zr alloy

Variations of Vickers hardness were observed in Al–Mg–Mn alloy and Al–Mg–Mn–Sc–Zr alloy at different ageing times, ranging from a peak value of 81.2 HV at 54 ks down to 67.4 HV at 360 ks, below the initial hardness value, 71.8 HV at 0 ks for the case of Al–Mg–Mn–Sc–Zr alloy. Microstructures of samples at each ageing stage were examined carefully by transmission electron microscopes (TEMs) both in two-dimensions and three-dimensions. The presence of different types, densities, and sizes of particles were observed dispersed spherical Al₃Sc_1−xZr_x and also block-shaped Al₃Sc precipitates growing along <1 0 0>_Al with facets {1 0 0} and {1 1 0} of the precipitates. TEM analysis both in two-dimensions and three-dimensions, performed on various samples, confirmed the direct correlation between the hardness and the density of Al₃Sc.     

Symmetrizer and Antisymmetrizer of the Birman–Wenzl–Murakami Algebras

Explicit formulas for the symmetrizer and the antisymmetrizer of the Birman–Wenzl–Murakami algebras BWM(r,q) _n are given.     

Fabrication and characterization of Cu–CdSe–Cu nanowire heterojunctions

The Cu–CdSe–Cu nanowire heterojunctions were fabricated by sequential electrochemical deposition of layers of Cu metal and CdSe semiconductor within the nano-pores of anodic alumina membrane templates. X-ray diffraction reveals the cubic phase for Cu and hexagonal phase for CdSe in the electrodeposited Cu–CdSe–Cu nanowire heterojunctions. The composition of the nanowire heterojunction segments is characterized by energy dispersive X-ray spectroscopy. The morphological study of nanowire heterojunctions has been made using scanning electron microscope and high resolution transmission microscopy. The nanowire heterojunctions grown in 100 and 300 nm nano-pore size templates have been found to have optical band gaps of 1.92 and 1.75 eV, respectively. The absorption spectra of 100 nm nanowire heterojunctions show a blue shift of 0.18 eV. The collective nonlinear current–voltage (I–V) characteristics of the 300 and 100 nm nanowire heterojunctions show their rectifying and asymmetric behaviour, respectively.     

Effect of Sn and Al additions on the microstructure and mechanical properties of amorphous Ti–Cu–Zr–Ni alloys

Amorphous Ti–Cu–Zr–Ni alloys with minor addition of Sn and Al were prepared by melt spinning technique.The effects of Sn and Al additions on the microstructures and mechanical properties of glassy ribbons were investigated.The amorphous state of ribbons was confirmed by x-ray diffraction and transmission electron microscopy,where those ribbons with Sn addition exhibited a fully amorphous state.The characteristic temperature indicates that Ti_(45)Cu_(35)Zr_(10)Ni_5Sn_5 alloy has a stronger glass-forming ability,as proven by differential scanning calorimetry.Ti_(45)Cu_(35)Zr_(10)Ni_5Al_5 alloy showed a better hardness of 9.23 GPa and elastic modulus of 127.15 GPa and good wear resistance.Ti_(45)Cu_(35)Zr_(10)Ni_5Sn_5 alloy displayed a pop-in event related to discrete plasticity according to nanoindentation.When the temperature is below 560 K,Ti_(45)Cu_(35)Zr_(10)Ni_5Sn_5 alloy mainly exhibits elasticity.When the temperature rises between 717 K and 743 K,it shows a significant increase in elasticity but decrease in viscoelasticity after the ribbon experiences the main relaxation at 717 K.When the temperature is above 743 K,the ribbon shows viscoplasticity.     

Synthesis and performance of Zn–Ni–P thin films

The electroplating of Zn–Ni–P thin film alloys from a sulfate bath containing phosphoric and phosphorous acid was investigated. The bath composition and the deposition parameters were optimized through Hull cell experiments, and the optimum experimental conditions were determined(p H = 2, temperature = 298–313 K, zinc sulfate concentration =30 g·L-1, EDTA concentration = 15 g·L-1, and current density = 1.0–2.0 A·dm-2). The SEM analysis of the coating deposited from the optimum bath revealed fine-grained deposits of the alloy in the presence of EDTA. Optical microscopy analysis indicated an electrodeposited thin film with uniform thickness and good adhesion to the steel substrate. The good adherence of the coatings was also demonstrated by the scratch tests that were performed, with a maximum determined value of 25 N for the critical load. Corrosion resistance tests revealed good protection of the steel substrate by the obtained Zn–Ni–P coatings, with values up to 85.89% for samples with Ni contents higher than 76%. The surface analysis of the thin film samples before and after corrosion was performed by X-ray photoelectron spectroscopy(XPS).     

Thermal and electrical conductivities of silver–indium–tin alloys

The variations of thermal conductivity with temperature for the Ag–[x] wt% Sn–20 wt% In alloys (x=8, 15, 35, 55 and 70) were measured using a radial heat flow apparatus. From the graphs of thermal conductivity versus temperature, the thermal conductivities of solid phases at their melting temperature for the Ag–[x] wt% Sn–20 wt% In alloys (x=8, 15, 35, 55 and 70) were found to be 46.9±3.3, 53.8±3.8, 61.2±4.3, 65.1±4.6 and 68.1±4.8 W/Km, respectively. The variations of electrical conductivity of solid phases versus temperature for the same alloys were determined from the Wiedemann–Franz equation using the measured values of thermal conductivity. From the graphs of electrical conductivity versus temperature, the electrical conductivities of the solid phases at their melting temperatures for the Ag–[x] wt% Sn–20 wt% In alloys (x=8, 15, 35, 55 and 70) alloys were obtained to be 0.036, 0.043, 0.045, 0.046 and 0.053 (×10⁸/Ωm), respectively. Dependencies of the thermal and electrical conductivities on the composition of Sn in the Ag–Sn–In alloys were also investigated. According to present experimental results, the thermal and electrical conductivities for the Ag–[x] wt% Sn–20 wt% In alloys linearly decrease with increasing the temperature and increase with increasing the composition of Sn.     

Characterization of bismuth–tin–lead and bismuth–tin–lead–cadmium fusible alloys

Microstructure, electrical, mechanical and thermal properties of quenched bismuth–tin eutectic, Rose (Bi₅₀Sn_22.9Pb_27.1) and Wood’s (Bi₅₀Sn_12.5Pb₂₅Cd_12.5) alloys have been investigated using scanning electron microscopy, X-ray diffraction analysis, the double bridge method, the dynamic resonance method, Vickers hardness measurement and thermal analysis. Wood’s alloy (Bi–Pb–Sn–Cd) has low electrical resistivity and melting point but a high elastic modulus and internal friction when compared with the Rose (Bi–Pb–Sn) alloy. The presence of cadmium in Wood’s alloy decreases its melting point and electrical resistivity with an increase in its elastic modulus, which improves the mechanical properties. Wood’s alloy (Bi–Pb–Sn–Cd) has better properties, which make it useful in various applications such as in protection shields for radiotherapy, locking of mechanical devices and welding at low temperature.