Temperature distribution in a thin rotating disk

The problem of heat conduction in a thin rotating disk with heat input at a fixed point is considered. The disk is cooled by forced convection from its lateral surfaces. By defining a complex temperature, the temperature throughout the disk is presented as a series of Bessel functions of complex argument. Results are given for a range of rotational speeds.Nomenclature R radial coordinate - angular coordinate - a radius of disk - b thickness of disk - T temperature - T ambient temperature - rotational speed of disk - q heat flux into disk - k thermal conductivity of disk - density of disk - c specific heat of disk - h coefficient of convective heat transfer - r dimensionless radial coordinate, R/a - T* characteristic temperature, q ₀ a/ k - t dimensionless temperature, (T–T )/T* - C ₁, C ₂ dimensionless parameters defined in (3)     

Thermally induced deformations in a partially coated elastic layer

The problem of a thin film coated on an elastic layer and subject to a thermal variation is analytically investigated in the present work. The analysis is developed in order to assess the mechanical behaviour of a crystalline undulator designed for obtaining high emission radiations through channelling phenomenon. It consists in a plane silicon wafer alternately patterned with thin films in silicon nitride on both surfaces. The system adopts a periodic curvature as a result of the misfit strain due to the different thermal expansivities of the layer and the film. The problem is governed by an integral equation which can be reduced to a linear algebraic system by approximating the unknown interfacial shear stress via series expansion of Chebyshev polynomials.     

Solid dissolution in a thin liquid film on a horizontal rotating disk

A model for the rate of dissolution in liquid film on horizontal rotating disk is obtained by the method of Leveque. It as well as models found in the literature are subjected to experimental verification by dissolving disk cast of gypsum in two liquids. Satisfactory agreement with the model predictions is found. The rate with rotation is compared to that in gravitational film. Enhancements up to 2.5 times are established.     

Dynamic response of a thin disk subjected to a thermal pulse

The dynamic response of a thin steel disk to a transient thermal pulse induced by a pulsed neodymium-glass laser was studied experimentally and compared with numerical results from a finite-element code. The experiment was designed to provide data for evaluation of a disk sample configuration for proposed erosion and corrosion experiments using laser deposition.     

Gas absorption in a thin liquid film flow on a horizontal rotating disk

An analytical model for the rate of gas absorption into laminar non-wavy film flow on a horizontal rotating disk is obtained assuming short contact times. Literature data for the oxygen mass transfer coefficient in a wavy film is correlated by means of the dimensionless numbers deriving from the model. The rate enhancement due to waves is found to vary from 6 to 13 times. It is established that the absorption process in the film on the disk as compared to that in a gravitational wavy film flow can be intensified up to 14 times by means of a moderate rotation speed.     

Thermally induced stresses in end-pumped laser geometries

Thermal stress calculations for an isotropic medium are presented. The calculations simulate a continuous wave laser beam pumping a laser crystal. Two different crystal shapes, a rod and a rectangular slab, are shown to give significantly different stress distributions. The calculation is based on an experiment where an argon laser was used to pump a neodymium: phosphate glass sample and photographs of stress fractures are shown.     

Thermally induced fracture of a smart functionally graded composite structure

Discussed is the fracture behavior of a cracked smart actuator on a substrate under thermal load. The actuator is made of piezoelectric material with functionally graded material (FGM) properties. Integral transform method is used to reduce the problem to the solution of a set of singular integral equations and is solved numerically. This paper is completed by including graphical plots of the thermal flow, stress and electric displacement intensity factors around the crack for different crack positions and material gradients. Directions of crack initiation are also predicted by using the energy density criterion.     

Plastic limit state of a thin hollow disk under thermomechanical loading

This paper considers the plastic limit state of a thin hollow axisymmetric disk subjected to thermomechanical loading with a uniform pressure distribution on the inner contour and a temperature increasing during deformation. A semi-analytical solution of the formulated boundary-value problem is obtained. Qualitative features of the behavior of the solution with a loss of the load-carrying capacity of the disk are investigated.     

Surface instabilities of thin liquid film flow on a rotating disk

 Steady flow of a liquid jet from a nozzle onto the centre of a rotating disk is studied with a streak line method to determine the superficial velocity of the spreading liquid film. Good agreement is found with an asymptotic analysis of the unperturbed flow field. Experimentally, the liquid surface is always perturbed by surface waves which appear as regular spirals, steady in the laboratory system in the low Reynolds number range. It could be shown that wave formation is very sensitive to entrance conditions. Therefore, it is assumed that wave generation is an entrance effect which acts as periodic forcing on the forming liquid film. Wave velocities outside the entrance region are measured and proved to be in good agreement with the prediction of a linear stability theory, as long as the flow rate and entrance perturbations are small. At higher flow rates or stronger disturbances, the radial development of the wave velocities takes on the characteristics predicted by nonlinear stability theories and is in qualitative agreement with experiments performed on an inclined plane. Received: 15 January 1998/Accepted: 8 June 1998     

Analysis of vibrations in a nonhomogeneous thermoelastic thin annular disk under dynamic pressure

The forced vibration analysis of nonhomogeneous thermoelastic, isotropic, thin annular disk under periodic and exponential types of axisymmetric dynamic pressures applied on its inner boundary has been performed and analytical benchmark solution has been obtained. The material has been assumed to have inhomogeneity according to a simple power law in the radial coordinate. The present analysis has been worked out in the context of generalized theory of thermoelasticity with one relaxation time. The two coupled partial differential equations have been clubbed and solved by employing Laplace transform technique to obtain the solution for radial displacement and temperature change in the space domain. In order to obtain the solution in physical domain, the inversion of the transform has been carried out by using residue calculus. The radial displacement, radial stress, circumferential stress, and temperature change have been computed numerically for copper material annular disk. The numerically computed results have been presented graphically to demonstrate the effect of two different types of dynamic pressure in reference to homogeneous and nonhomogeneous material disk. The results for homogeneous material disk have been deduced and validated with that available in literature. The closed-form solution obtained here is interesting and allows further parametric studies of nonhomogeneous structures.     

Axisymmetric thermal stress in a thin circular disk by the method of matched asymptotic expansions

Using the method of matched asymptotic expansions, a solution is constructed for thin disks with stress-free edges which consists of an analytical solution in the interior and a boundary layer correction. The analytical solution is shown to be accurate to order (h/a)² compared to unity, and is that given by the classical theory of thin plates. There is no boundary layer in the case of a clamped disk, so that the thin plate solution is valid throughout. The solution of the boundary layer equations was obtained numerically by solving the finite difference form of the governing equations using an iterative scheme called “Dynamic Relaxation”.     

Thermally induced wrinkling in orthotropic layered plates with irregular delaminations

Delaminated regions figure prominently among potential threats to the structural integrity of layered plate configurations. Under a certain thermal loading threshold, geometrically nonlinear local instabilities in the form of buckling or wrinkling across the delaminated region crop up, giving rise to markedly amplified distributions of contour peeling stresses. The present paper aims to shed light on and quantify the manifold aspects and implications of the delamination-thermal-wrinkling trio. The paper faces the challenges of handling the nature of the layered configuration, the inherent geometrical irregularity of delaminated regions, the discontinuous interfacial conditions, the 3D stress state along the delamination contour, and the nonlinear evolution of local instabilities across an orthotropic delamination. For that purpose, a specially tailored 2D multi layered plate model and a corresponding triangular finite element are derived. The original contribution of the proposed model is in its ability to capture the thermally-driven, nonlinear small scale phenomena related to geometrically nonlinear response of the layered structure, using a 2D multi-layered plate theory solved with efficient 2D multi-layered triangular finite elements, as opposed to computationally expensive 3D finite element analysis. This is accomplished via the integration and synergy of methodologies that include: multi-layered high order plate theory to account for the layered layout, geometrically nonlinear strain-displacement relations to account for geometrical nonlinearities, orthotropic and thermo-elastic constitutive laws to account for thermal loads, and interlayer interface modelling which, combined with a the shear-locking free triangular FE, allows accounting for arbitrarily shaped delaminations. The model is validated against a 1D closed form solution and a 3D continuum based finite element analysis and is then used for a numerical study. In the study, the onset and the evolution of local instabilities in an adhesively bonded orthotropic layer across an irregular delamination are looked into. Special attention is given to the significant influence of material orthotropy and the relative directionality of the delamination on the threshold thermal load, the nonlinear wrinkling patterns, and the peeling traction distribution.     

Instability of the vibrations of a rotating thin disk due to an additional support

Summary Vibrations of a rotating thin disk, such as a floppy disk with a clamped inner circle, a free outer periphery and an elastic support at one point are analyzed with due consideration of the centrifugal force. A solution of the equation of motion is described in the form of a series by orthogonal eigenfunctions of a non-rotating disk with the same boundary conditions, and a characteristic equation is introduced by the existence condition of the coefficients. The relation between natural frequencies and angular velocity, and regions of instability of free vibrations are shown.

---

Schwingungsinstabilität rotierender dünner Scheiben mit zusätzlicher Stützung

Übersicht Die Schwingungen von rotierenden dünnen Schieben, die am Innenrand fest eingespannt sind, aber an einer Stelle des freien Außenrandes elastisch gestützt sind, werden unter Berücksichtigung der Flickraft analysiert. Hier wird eine Lösung der Bewegungsgleichung durch eine Reihe mit den orthogonalen Eigenformen einer gleichgelagerten nicht rotierenden Scheibe beschrieben, und es wird aus der Existenzbedingung der Koeffizienten eine charakteristische Gleichung eingeführt. Die Beziehung zwischen den Eigenfrequenzen und der Drehzahl sowie die Instabilitätsbereiche der freien Schwingungen werden dargestellt.

     

Thermally induced dynamic instability of laminated composite conical shells

Thermally induced dynamic instability of laminated composite conical shells is investigated by means of a perturbation method. The laminated composite conical shells are subjected to static and periodic thermal loads. The linear instability approach is adopted in the present study. A set of initial membrane stresses due to the elevated temperature field is assumed to exist just before the instability occurs. The formulation begins with three-dimensional equations of motion in terms of incremental stresses perturbed from the state of neutral equilibrium. After proper nondimensionalization, asymptotic expansion and successive integration, we obtain recursive sets of differential equations at various levels. The method of multiple scales is used to eliminate the secular terms and make an asymptotic expansion feasible. Using the method of differential quadrature and Bolotin's method, and imposing the orthonormality and solvability conditions on the present asymptotic formulation, we determine the boundary frequencies of dynamic instability regions for various orders in a consistent and hierarchical manner. The principal instability regions of cross-ply conical shells with simply supported–simply supported boundary conditions are studied to demonstrate the performance of the present asymptotic theory.     

Investigation of the effect of the Coriolis force on a thin fluid film on a rotating disk

The effect of the Coriolis force on the evolution of a thin film of Newtonian fluid on a rotating disk is investigated. The thin-film approximation is made in which inertia terms in the Navier–Stokes equation are neglected. This requires that the thickness of the thin film be less than the thickness of the Ekman boundary layer in a rotating fluid of the same kinematic viscosity. A new first-order quasi-linear partial differential equation for the thickness of the thin film, which describes viscous, centrifugal and Coriolis-force effects, is derived. It extends an equation due to Emslie et al. [J. Appl. Phys. 29, 858 (1958)] which was obtained neglecting the Coriolis force. The problem is formulated as a Cauchy initial-value problem. As time increases the surface profile flattens and, if the initial profile is sufficiently negative, it develops a breaking wave. Numerical solutions of the new equation, obtained by integrating along its characteristic curves, are compared with analytical solutions of the equation of Emslie et al. to determine the effect of the Coriolis force on the surface flattening, the wave breaking and the streamlines when inertia terms are neglected.     

An investigation into the spreading of a thin liquid drop under gravity on a slowly rotating disk

The axisymmetric spreading of a thin liquid drop under the influence of gravity and rotation is investigated. The effects of the Coriolis force and surface tension are ignored. The Lie group method is used to analyse the non-linear diffusion-convection equation modelling the spreading of the liquid drop under gravity and rotation. A stationary group invariant solution is obtained. The case when rotation is small is considered next. A straightforward perturbation approach is used to determine the effects of the small rotation on the solution given for spreading under gravity only. Over a short period of time no real difference is observed between the approximate solution and the solution for spreading under gravity only. After a long period of time, the approximate solution tends toward a dewetting solution. We find that the approximate solution is valid only in the interval t∈[0,t∗), where t∗ is the time when dewetting takes place. An approximation to t∗ is obtained.     

Experiments on the flow of a thin liquid film over a horizontal stationary and rotating disk surface

Experiments on characterization of thin liquid films flowing over stationary and rotating disk surfaces are described. The thin liquid film was created by introducing deionized water from a flow collar at the center of an aluminum disk with a known initial film thickness and uniform radial velocity. Radial film thickness distribution was measured using a non-intrusive laser light interface reflection technique that enabled the measurement of the instantaneous film thickness over a finite segment of the disk. Experiments were performed for a range of flow rates between 3.0 lpm and 15.0 lpm, corresponding to Reynolds numbers based on the liquid inlet gap height and velocity between 238 and 1,188. The angular speed of the disk was varied from 0 rpm to 300 rpm. When the disk was stationary, a circular hydraulic jump was present in the liquid film. The liquid-film thickness in the subcritical region (downstream of the hydraulic jump) was an order of magnitude greater than that in the supercritical region (upstream of the hydraulic jump) which was of the order of 0.3 mm. As the Reynolds number increased, the hydraulic jump migrated toward the edge of the disk. In the case of rotation, the liquid-film thickness exhibited a maximum on the disk surface. The liquid-film inertia and friction influenced the inner region where the film thickness progressively increased. The outer region where the film thickness decreased was primarily affected by the centrifugal forces. A flow visualization study of the thin film was also performed to determine the characteristics of the waves on the free surface. At high rotational speeds, spiral waves were observed on the liquid film. It was also determined that the angle of the waves which form on the liquid surface was a function of the ratio of local radial to tangential velocity.     

Thermally induced local slip of contacting solids in vicinity of surface groove

The thermoelasticity stick–slip contact problem for semi-infinite solids, one of which possesses a surface groove, is considered. The local slip of boundaries occurs in the vicinity of arisen intersurface gap due to different thermal deformations of the opposite faces caused by the temperature jump. By making use of complex potentials method, the corresponding plane contact problem is reduced to a set of three singular integral equations. The analytical solution is constructed for certain shape of the groove. The contact normal and tangential stresses are analyzed along with the parameters of the gap and slip zones, and their dependencies on mechanical and thermal loading.