Immunoenzymatic assay of dyes currently used in affinity chromatography for protein purification.

Cibacron Blue F3-GA, Basilen Blue E3-G and Procion Red HE-3B are dyes currently used in affinity purification, and are commonly determined by spectrophotometry with limited sensitivity. An assay method is described based on a specific immunochemical recognition of the dyes amplified by a final enzymatic reaction. The sensitivity is close to 1 ng/ml of dye and the method is applicable any time that sensitive and accurate results are necessary. This method has actually been applied with success to the determination of trace amounts of dyes in the presence of affinant protein. The method was also applied to the demonstration of dye leaching from affinity sorbents when treated under acidic and/or alkaline conditions.     

Albumin separation with Cibacron Blue carrying macroporous chitosan and chitin affinity membranes

Cibacron Blue F3GA, Procion Red HE-3B and Procion Blue MX-R were immobilized on macroporous chitosan and chitin membranes with concentrations as high as 10–200 μmol/ml membrane. These dyed membranes were chemically and mechanically stable, could be reproducibly prepared, and operated at high flow rates. Human serum albumin (HSA) and bovine serum albumin (BSA) were selected as model proteins, and their adsorption on and desorption from the dyed chitosan membranes investigated. The Cibacron Blue F3GA membranes had a higher protein adsorption capacity, much greater for HSA than BSA, than the other dyed membranes. About 8.4 mg HSA/ml membrane were adsorbed at saturation by Cibacron Blue F3GA–chitosan membranes from a 0.05 M Tris–HCl/0.05 M NaCl, pH 8 solution. The chitin membranes had a lower dye content and hence a lower protein adsorption capacity than the chitosan membranes. The effects of important operation parameters (flow rate, protein concentration and loading) were also investigated. Cibacron Blue F3GA–chitosan membranes were employed for the separation of HSA from human plasma and high purity HSA thus obtained. This suggests that these membranes could be used for large-scale plasma fractionation.     

IMMOBILIZED CIBACRON BLUE F3G-A ON CROSSLINKED POLY (VINYL ALCOHOL) FOR AFFINITY CHROMATOGRAPHY

Immobilized triazine dye affinity chromatography has been widely used for protein purification. In this paper, cibacron Blue F3G-A was immobilized,through a spacer arm, onto a rigid hydrophilic porous polymer by reacting an epoxy-group-containing poly(vinyl alcohol) with 6-aminohexyl-N'-Cibacron Blue F3G-A,which was obtained by reacting Cibacron Blue F3G-A with excess of 1,6-diaminohexane, in a pH 8.6 buffer. The epoxy-group-containing poly(vinyl alcohol) was prepared by hydrolysis of macroporous crosslinded poly(vinyl acetate),which was synthesized by suspension copolymerization of vinyl acetate and triallyl isocyanurate in the presence of butyl acetate and n-heptane as diluents. The cibacron Blue F3G-A-immobilized poly(vinyl alcohol)was packed in a stainless steel column (250×5 mm I. D.) and the chromatographic behaviors of several proteins (cytochrome c, lysozyme, bovine serum albumin, insulin, and lactate dehydrogenase) were determined.     

Partition of purified human thyroxine-binding globulin in aqueous two-phase systems in response to reactive dyes

Thyroxine-binding globulin was isolated from pooled human serum by a two-step method involving affinity chromatography on thyroxine-Sepharose and preparative disc-electrophoresis. The final product was found to be homogeneous by polyacrylamide gel electrophoresis and has a molecular weight of 59,000. Isoelectric focusing resolved the protein into seven bands with isoelectric points ranging from 3.9 to 4.3. The isolated protein showed affinity to a number of different dyes as recognized by affinity phase partitioning. The interaction of the protein with the dye Cibacron Blue F3G-A was found to be strongly competitive with the natural ligand thyroxine.     

Purification of neutral protease by dye affinity chromatography

Twenty triazinic dyes were assayed as ligands for the chromatographic affinity purification of a neutral protease from Flavourzyme^™, a commercial preparation. Screening at pH 4.0 allowed the selection of eight dyes on the basis of their high protease adsorption. When the pH was set to 5.0 in order to increase selectivity, only Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A maintained protease adsorption at high values. Neither maximum capacities nor dissociation constants calculated from isotherms measured at 8 and 25°C showed great differences. By contrast, a strong temperature effect was evidenced in the elution step: elution at 8°C allowed 70, 81, and 98% recovery of adsorbed protease with Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A, respectively, whereas only 20% recovery was attained at 25°C. Based on the results obtained, a purification process for the neutral protease contained in Flavourzyme with Cibacron Blue F3G-A as the affinity ligand was developed, yielding 96% of electrophoretically pure enzyme in a single step, the specific activity rising from 850 to 3650 U/mg.     

Bead cellulose derivatives as supports for immobilization and chromatographic purification of proteins

Characteristic data are presented for Divicell, a macroporous bead cellulose with excellent flow parameters. The preparation of Divicell derivatives and their properties are described with respect to their application as chromatographic supports. The ion exchangers Divicell DEAE and Divicell CM were manufactured in two types with different exclusion limits and an available capacity for proteins of up to 100 mg/ml gel. Divicell Blue is a bead cellulose with covalently bound Cibacron Blue F3G-A and was found to be a very suitable adsorbent for the selective separation and purification of human serum albumin. Activation of Divicell with sodium periodate, epichlorohydrin and 5-norbornene-2,3-dicarboximido carbonochloridate provided activated supports used for immobilization of ligands in organic solvents and in aqueous solutions. Coupling of amines, diamines, amino acids, carbohydrates and proteins is described. The immobilized ligands retained their biological activity as determined by their specific adsorption of proteins. Divicell alkyl derivatives were tested in hydrophobic interaction chromatography with bovine serum albumin as a model. Examples are presented of the application of Divicell derivatives to the purification of biomacromolecules such as immunoglobulins and lectins by affinity chromatography. The results were comparable to those obtained using the corresponding Sepharose-derived absorbents.     

染料膜亲和色谱法中膜堆的制备及应用

将染料亲和配基偶联于大孔纤维素膜上,所得亲和膜用胶粘法制成亲和膜堆,膜堆的通透性远优于通常的亲和色谱柱。装有蓝色和红色亲和膜的膜堆可分别用于人血清白蛋白和碱性磷酸酯酶的分离纯化,其中碱性磷酸酯酶可在一步操作后纯化４０倍。     

活性蓝F3GA固载的无孔单分散亲水性交联聚甲基丙烯酸环氧丙酯亲和色谱填料的制备与应用

以3.0 μm无孔单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂为基质,与三嗪染料活性蓝F3GA(Cibacron Blue F3GA)反应,制备出 一种固定化染料聚合物高效亲和色谱填料。考察了应用该填料时流动相中的盐离子浓度、有机溶剂及流速等对牛血清白蛋白(BSA)和 溶菌酶(Lys)保留行为的影响。实验结果表明,该染料亲和填料具有良好的色谱性能。利用前沿色谱法测定了染料与溶菌酶之间的表观 解离常数为5.26×10-5 mol/L。使用该填料成功地从鸡蛋清和小牛血清中分别分离纯化了Lys和BSA,十二烷基硫酸钠-聚丙烯酰胺凝胶 电泳(SDS-PAGE)分析显示Lys和BSA的纯度分别为95%和92%。     

Examination of dye-protein interaction by gel-permeation chromatography

The interaction of Cibacron blue F3G-A with two therapeutic proteins, recombinant human growth hormone and recombinant human interferon-alpha2b, has been examined by applying gel-permeation chromatography in combination with the absorption difference spectroscopy. The complexes of these proteins with Cibacron blue F3G-A have been isolated, and their absorbance spectra have been registered. The influence of Cibacron blue F3G-A on the oligomeric state of proteins has been investigated. It was found that Cibacron blue F3G-A promotes the generation of interferon-alpha2b dimers at pH 5.0.     

白蛋白在以染料为配基的醋酸纤维滤棒上的等温吸附行为(英文)

 以醋酸纤维滤棒为基质 ,染料CibacronBlueF3GA为配基 ,合成了一种新的染料亲和介质 ;分别以牛血清白蛋白 (BSA)和人血清白蛋白 (HSA)为对象 ,用静态法进行了吸附实验 ,得到了相应的亲和等温吸附曲线 ;对曲线按Langmuir模型和Freundlich模型分别进行拟合 ;结果表明 ,醋酸纤维滤棒染料亲和介质对BSA和HSA的等温吸附遵循Freundlich模型。采用该亲和介质装柱并分离实际样品人血浆 ,可得到纯化的人血清白蛋白。     

Purification of glucose-6-phosphate dehydrogenase from baker’s yeast in aqueous two-phase systems with free triazine dyes as affinity ligands

To improve the selectivity of glucose-6-phosphate dehydrogenase (G6PDH) extraction by an aqueous two-phase system, a simple and inexpensive affinity aqueous two-phase system using unbound reactive triazine dyes as ligands was introduced. In a polyethylene glycol (PEG)/hydroxypropyl starch (PES) system, the unbound free triazine dyes, Cibacron Blue F3GA and Procion Red HE3B, partitioned unevenly in the top PEG-rich phase and thus showed an affinity effect on G6PDH, but no influence on hexokinase. The various parameters investigated were pH of the system, buffers, molecular weight of PEG, and ligand type and concentration. A two-step affinity extraction process was established for the purification of G6PDH from baker’s yeast. The total yield of G6PDH was 66.9% and purification factor was 2.35.     

Dye attached poly(hydroxyethyl methacrylate) cryogel for albumin depletion from human serum

Cibacron Blue F3GA was immobilized on poly(hydroxyethyl methacrylate) cryogel and it was used for selective and efficient depletion of albumin from human serum. The poly(hydroxyethyl methacrylate) was selected as the basic component because of its inertness, mechanical strength, chemical and biological stability, and biocompatibility. Cibacron Blue F3GA was covalently attached to the poly(hydroxyethyl methacrylate) cryogel to produce poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel affinity column. The poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel was characterized with respect to gelation yield, swelling degree, total volume of macropores, Fourier Transform Infrared spectroscopy, and scanning electron microscopy. It was found that the maximum amount of adsorption (343 mg/g of dry cryogel) obtained from experimental results is very close to the calculated Langmuir adsorption capacity (345 mg/g of dry cryogel). The maximum adsorption capacity for poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel column was obtained as 950 mg/g of dry cryogel for nondiluted serum. The adsorption capacity decreased with increasing dilution ratios while the depletion ratio of albumin remained as 77% in serum sample. Finally, the poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel was optimized for using in the fast protein liquid chromatography system for rapid removal of the high abundant proteins from the human serum.     

Protein purification using immobilised triazine dyes.

This review attempts to identify proteins which selectively interact with immobilised triazine dyes such as Cibacron blue F3GA and Procion red HE 3B. Different support matrices are compared by examining the capacities of these dyes for proteins. Various approaches to the immobilisation of triazine dyes are considered together with the use of spacers. Some theories of the mechanism of protein retardation by immobilised dyes are discussed. A number of methods are suggested for the measurement of dye concentrations and for the modification of the binding of proteins to dye columns. The variety of elution methods is compared with a view to optimizing purifications. The scope of applications is reviewed as well as the choice of dye. Some advantages of triazine dyes over other affinity ligands are given. It is concluded that although no satisfactory mechanism for the binding of triazine dyes to proteins has yet been proposed, these dyes possess considerable potential for protein purification, particularly when applied on the large scale.     

Liquid—liquid extraction of lactate dehydrogenase from muscle using polymer-bound triazine dyes

An extract from porcine muscle containing soluble enzymes has been partitioned between the two liquid phases of an aqueous, biphasic system consisting of dextran, polyethylene glycol, and water. The influence of polymer-bound triazine dyes (Cibacron blue F3G-A and Procion yellow HE-3G) on the partition of lactate dehydrogenase and total protein was studied. The effects of pH and concentrations of polymers and buffer on this so-called affinity partitioning were also determined. The two-phase systems were used in extraction procedures for purification of lactate dehydrogenase to a specific activity of 456–494 U (7.6–8.4 μkat) per mg protein. The use of these systems for extraction of enzymes in technical scale is discussed.     

Solid-phase extraction and simultaneous determination of trace amounts of sulphonated and azo sulphonated dyes using microemulsion-modified-zeolite and multivariate calibration

A simple and rapid analytical method for the determination of trace levels of five sulphonated and azo sulphonated reactive dyes: Cibacron Reactive Blue 2 (C-Blue, trisulphonated dye), Cibacron Reactive Red 4 (C-Red, tetrasulphonated azo dye), Cibacron Reactive Yellow 2 (C-Yellow, trisulphonated azo dye), Levafix Brilliant Red E-4BA (L-Red, trisulphonated dye), and Levafix Brilliant Blue E-4BA (L-Blue, disulphonated dye) in water is presented. Initially, the dyes were preconcentrated from 250 ml of water samples with solid-phase extraction using natural zeolite sample previously modified with a microemulsion. The modified zeolite exhibited an excellent extraction for the dyes from solution. The parameters that influence quantitative recovery of reactive dyes like amount of extractant, volume of dye solution, pH, ionic strength, and extraction-elution flow rate were varied and optimized. After elution of the adsorbed dyes, the concentration of dyes was determined spectrophotometrically with the aid of principle component regression (PCR) method without separation of dyes. The results obtained from PCR method were comparable to those obtained from HPLC method confirming the effectiveness of the proposed method. With the aid of SPE by M-zeolite, the concentration of dyes could be reproducibly detected over the range 25-200 ppb for C-Yellow and L-Blue and from 50 to 250 ppb for C-Blue, C-Red, and L-Red. The multivariate detection limits of dyes were found to be 15 ppb for C-Yellow and L-Blue and 25 ppb for C-Blue, C-Red, and L-Red dyes. The proposed chemometric method gave recoveries from 85.4 to 115.3% and R.S.D. from 1.0 to 14.5% for determination of the five dyes without any prior separation for solutes.     

High-performance liquid chromatography of proteins: purification of alpha-fetoprotein from fetal calf serum

High-performance liquid chromatography was utilized for the purification of bovine alpha-fetoprotein (BAFP) from fetal calf serum (FCS). An initial step in the purification involved absorption of charcoal delipidated FCS on Cibacron Blue F3GA gel. The Cibacron Blue pre-purified FCS was then chromatographed on a Polyanion SI weak anion-exchange column. The BAFP isolated had a purity of greater than 93% with an overall yield of 48% from FCS. The procedure was applicable for semi-preparative scale purification of BAFP.     

A new affinity-HPLC packing for protein separation: Cibacron blue attached uniform porous poly(HEMA-<Emphasis Type="Italic">co</Emphasis>-EDM) beads

In this study, a new affinity high-performance liquid chromatography (HPLC) stationary phase suitable for protein separation was synthesized. In the first stage of the synthesis, uniform porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(HEMA-co-EDM), beads 6.2 μm in size were obtained. Homogeneous distribution of hydroxyl groups in the bead interior was confirmed by confocal laser scanning microscopy. The plain poly(HEMA-co-EDM) particles gave very low non-specific protein adsorption with albumin. The selected dye ligand Cibacron blue F3G-A (CB F3G-A) was covalently linked onto the beads via hydroxyl groups. In the batch experiments, albumin adsorption up to 60 mg BSA/g particles was obtained with the CB F3G-A carrying poly(HEMA-co-EDM) beads. The affinity-HPLC of selected proteins (albumin and lysozyme) was investigated in a 25 mm×4.0-mm inner diameter column packed with CB F3G-A carrying beads and both proteins were successfully resolved. By a single injection, 200 μg of protein was loaded and quantitatively eluted from the column. The protein recovery increased with increasing flow rate and salt concentration of the elution buffer and decreased with the increasing protein feed concentration. During the albumin elution, theoretical plate numbers up to 30,000 plates/m were achieved by increasing the salt concentration.     

Degradation of textile dyes mediated by plant peroxidases

The peroxidase enzyme from the plants Ipomea palmata (1.003 IU/g of leaf) and Saccharum spontaneum (3.6 IU/g of leaf) can be used as an alternative to the commercial source of horseradish and soybean peroxidase enzyme for the decolorization of textile dyes, mainly azo dyes. Eight textiles dyes currently used by the industry and seven other dyes were selected for decolorization studies at 25–200 mg/L levels using these plant enzymes. The enzymes were purified prior to use by ammonium sulfate precipitation, and ion exchange and gel permeation chromatographic techniques. Peroxidase of S. spontaneum leaf (specific activity of 0.23 IU/mg) could completely degrade Supranol Green and Procion Green HE-4BD (100%) dyes within 1 h, whereas Direct Blue, Procion Brilliant Blue H-7G and Chrysoidine were degraded >70% in 1 h. Peroxidase of Ipomea (I. palmata leaf; specific activity of 0.827 U/mg) degraded 50 mg/L of the dyes Methyl Orange (26%), Crystal Violet (36%), and Supranol Green (68%) in 2–4 h and Brilliant Green 54%), Direct Blue (15%), and Chrysoidine (44%) at the 25 mg/L level in 1 to 2 h of treatment. The Saccharum peroxidase was immobilized on a hydrophobic matrix. Four textile dyes, Procion Navy Blue HER, Procion Brilliant Blue H-7G, Procion Green HE-4BD, and Supranol Green, at an initial concentration of 50 mg/L were completely degraded within 8 h by the enzyme immobilized on the modified polyethylene matrix. The immobilized enzyme was used in a batch reactor for the degradation of Procion Green HE-4BD and the reusability was studied for 15 cycles, and the halflife was found to be 60 h.     

Plasma proteomics for biomarker discovery: a study in blue

The performance of Cibacron Blue dye (HiTrapBlue or Affigel Blue) in depleting albumin from plasma, as a pre-treatment for biomarker searching in the low-abundance proteome, is here assessed. It is shown that (i) co-depletion of non-albumin species is an ever-present hazard; (ii) the only proper eluant able to release quantitatively the proteins bound to the dye is boiling 4% SDS-25 mM DTT, an ion shock (2 M NaCl) being quite ineffective in releasing the low-abundance species tightly bound to the dye moiety; (iii) the mechanism of dye-protein interaction, after an initial ion-ion docking, is a robust hydrophobic interaction, which progressively augments at lower and lower pH values; (iv) at pH 2.2 in the presence of 0.1% TFA, the blue resin behaves, for all practical purposes, just as a reverse-phase chromatography column, since all residual proteins present in plasma are completely harvested. However Cibacron Blue technology should not necessarily be discarded: As long as also the plasma fraction adsorbed is properly released and analyzed, together with the flow through, one should be able to perform a viable analysis of the low-abundance proteome.     

Adsorption of Human Serum Albumin onto PVA-coated Affinity Microporous PTFE Capillary

Affinity dye-ligand Cibacron Blue F3GA（CB F3GA） was covalently coupled with poly（vinyl alcohol）（PVA） coated on the inner surface of microporous poly（tetra-fluoroethylene）（MPTFE） membranous capillary. The PVA-coated PTFE capillary surface was characterized by XPS and FESEM. The grafting degree of PVA and the amount of CB F3GA immobilized onto the membranous capillary were 23.5 mg/g and 89.6 pmol/g, respectively. These dyed membranous capillaries were chemically and mechanically stable, and could be reproducibly prepared. Human serum albumin（HSA） was selected as model protein. The saturation adsorbance of the dye attached membranous capillary was 85.3 mg HSA/g, while the capacity of non-specific adsorption for HSA was less than 0.3 mg/g.