A general synthetic route to 6,6-substituted-6H-dibenzo[b,d]pyrans from dibenzofuran

The reaction of dibenzofuran 1, lithium pieces (2.2 equiv), and TMEDA (2.2 equiv) in dry ether under reflux led to a solution of the corresponding C,O-dilithiated intermediate 2 which, upon treatment with different ketones or aldehydes (0.8 equiv) at -78 degrees C, afforded, after hydrolysis and dehydration, 6,6-substituted-6H-dibenzo[b,d]pyrans 3 in good yields. The reaction undergoes reductive ring opening and cyclization, and the intermediate diol 4e was isolated.     

One-pot four-component synthesis of tetrahydrofuran derivatives involving an alkyne, an ethylene and two aldehydes via CuCl-mediated reactions of oxazirconacyclopentenes with aldehydes

In the presence of 1 equiv. of CuCl, the reaction of zirconacyclopentenes with 2 equiv. of aldehydes from −78°C to room temperature afforded tetrahydrofuran derivatives in good isolated yields upon hydrolysis with aqueous 3N HCl; oxazirconacycloheptenes, generated in situ from zirconacyclopentenes with one aldehyde, was found to be the reactive intermediate.     

New highly asymmetric Henry reaction catalyzed by Cu(II) and a C(1)-symmetric aminopyridine ligand, and its application to the synthesis of miconazole

A new catalytic asymmetric Henry reaction has been developed that uses a C(1)-symmetric chiral aminopyridine ligand derived from camphor and picolylamine. A variety of aromatic, heteroaromatic, aliphatic, and unsaturated aldehydes react with nitromethane and other nitroalkanes in the presence of DIPEA (1.0 equiv), Cu(OAc)(2)*H(2)O (5 mol %), and an aminopyridine ligand (5 mol %) to give the expected products in high yields (up to 99 %), moderate-to-good diastereoselectivites (up to 82:18), and excellent enantioselectivities (up to 98 %). The reaction is air-tolerant and has been used in the synthesis of the antifungal agent miconazole.     

Reaction of oxazirconacycloheptenes with aldehydes mediated by CuCl: one-pot synthesis of tetrahydrofuran derivatives from four different components involving two molecules of the same or different aldehydes, an ethylene and an alkyne

Reaction of zirconacyclopentenes with 2 equiv. of the same aldehydes in the presence of 1 equiv. of CuCl from −78 °C to room temperature afforded tetrahydrofuran derivatives in good isolated yields upon hydrolysis with aqueous 3 N HCl. Oxazirconacycloheptenes, generated in situ from zirconacyclopentenes with one aldehyde was found to be the reactive intermediate. When treated with a second aldehyde and CuCl, an oxazirconacycloheptene gave a tetrahydrofuran derivative comprised of four different components involving an alkyne, an ethylene and two different aldehydes, thus providing the first one-pot synthesis of important tetrahydrofuran derivatives from four components. When bulky aldehydes were used, hydrolysis of the above reaction mixtures afforded 2-hexen-1,6-diols, which could be quantitatively transformed to their corresponding tetrahydrofuran derivatives when treated with stronger aqueous acid (12 N HCl).     

Lewis acid-catalyzed [4 + 2] benzannulation between enynal units and enols or enol ethers: novel synthetic tools for polysubstituted aromatic compounds including indole and benzofuran derivatives

The reaction of enynals 1, including o-(alkynyl)benzaldehydes, and carbonyl compounds 2, such as aldehydes and ketones, in the presence of a catalytic amount of AuBr3 in 1,4-dioxane at 100 degrees C gave the functionalized aromatic compounds 3 in high yields. Similarly, the AuBr3-catalyzed reactions of 1 with acetal compounds 5 afforded the corresponding aromatic compounds 3 in good yields. On the other hand, when the reaction was carried out in the presence of a catalytic amount of Cu(NTf2)2 and 1 equiv of H2O in (CH2Cl)2 at 100 degrees C, the decarbonylated naphthalene products 4 were obtained selectively over 3. Benzofused heteroaromatic compounds, such as indole derivatives 13 and benzofuran derivatives 15, were also synthesized by using the present benzannulation methodology.     

Organocatalytic asymmetric aldol reaction in the presence of water

Water was found to be a suitable solvent for the l-prolinethioamide catalysed aldol reaction of various cyclic ketones with aromatic aldehydes. Treatment of 4-nitrobenzaldehyde with as little as 1.2 equiv. of cyclohexanone in the presence of the protonated catalyst 1-TFA, afforded aldol products in high yields (up to 97%) with high diastereo- and enantioselectivity (up to >5 : 95 dr and 98% ee). The use of a high excess of ketone was avoided by conducting the aldol addition in the presence of water. Furthermore, different 'salting-out' and 'salting-in' salts were investigated and it was proven that the rate of acceleration and the stereochemical outcome of the reaction are affected by hydrophobic aggregation. Scope and limitation studies revealed that electron deficient aldehydes afforded aldol products with high stereoselectivity in the presence of 1-Cl(2)CHCO(2)H. It was shown that various cyclic ketones, under the conditions found, gave aldol products with fair yields, even if they are used in substoichiometric amounts (1.2 to 2.0 equiv.).     

Controlled syntheses, characterization, and reactivity of neutral and anionic lanthanide amides supported by methylene-linked bis(phenolate) ligands

A series of neutral and anionic bis(phenolate) lanthanide amides were synthesized by general metathesis reactions, and their reactivity was explored. Protolytic ligand exchange reactions of MBMPH2 (MBMP = 2,2'-methylene bis(6-tert-butyl-4-methyl-phenolate)) with [Ln{N(TMS)2}2(mu-Cl)(THF)]2 (TMS = SiMe3) afforded the desired bridged bis(phenolate) lanthanide chlorides [(MBMP)Ln(mu-Cl)(THF)2]2 [Ln = Nd (1), Yb (2)] in high isolated yields. These lanthanide chlorides were found to be useful precursors for the synthesis of the corresponding lanthanide derivatives. Reactions of 1 and 2 with 2 equiv of NaN(TMS)2 in THF produced the expected neutral bis(phenolate) lanthanide amido complexes (MBMP)Ln[N(TMS)2](THF)2 [Ln = Nd (3), Yb (4)] in high yields. Whereas the reactions of 1 and 2 with LiN(TMS)2 in a 1:4 molar ratio gave the anionic bis(phenolate) lanthanide amides as discrete ion-pair complexes [Li(THF)4][(MBMP)Ln{N(TMS)2}2] [Ln = Nd (5), Yb (6)] in high isolated yields. Further study revealed that 5 and 6 can also be conveniently synthesized in high yields by the direct reactions of MBMPH2 with [Ln{N(TMS)2}2(mu-Cl)(THF)]2 in a 2:1 molar ratio, and then with 4 equiv of nBuLi. The reactivity of the neutral and anionic bis(phenolate) lanthanide amides was comparatively investigated. It was found that the insertion reactions of carbodiimide into the Ln-N bond of neutral lanthanide amido complexes 3 and 4 gave the anticipated bis(phenolate) lanthanide guanidinate complexes [(mu-O-MBMP)Nd{(iPrN)2CN(TMS)2}]2 (7) and (MBMP)Yb[(iPrN)2CN(TMS)2] (8), respectively, in high yields, whereas the similar reaction of carbodiimide with anionic amido complex 5 provided the unexpected ligand-redistributed products, and the homoleptic ion-pair bis(phenolate) neodymium complex [Li(DME)2(THF)][(MBMP)2Nd(THF)2] (9) was finally isolated as one of the products. Furthermore, the anionic bis(phenolate) lanthanide amides showed higher catalytic activity for the polymerization of epsilon-caprolactone than the neutral ones. All of the complexes were characterized with elemental analysis and IR spectra, and the definitive molecular structures of 1-3 and 5-9 were provided by single-crystal X-ray analyses.     

A novel titanium tetrahalide-mediated carbon-carbon bond-forming reaction: regioselective synthesis of substituted (E,Z)-1,5-dihalo-1,4-dienes

Reactions of aldehydes with 2 equiv of alkyne in the presence of TiX(4) (X = Cl, Br) regioselectively generated 1,5-dihalo-1,4-dienes in moderate to good yields with high (E,Z)-stereoselectivity. [reaction: see text]     

Chemoselective Schmidt reaction mediated by triflic acid: selective synthesis of nitriles from aldehydes

An excellent utility of Schmidt reaction of aldehydes to access corresponding nitriles in an instantaneous reaction is demonstrated. The reaction of aldehydes with NaN(3) and TfOH furnishes the corresponding nitriles in near quantitative yields and tolerates a variety of electron-withdrawing and electron-donating substituents on the substrates. Formanilides, a common side product in Schmidt reaction, is not observed in this reaction. Besides these advantages, the salient feature of this reaction is that it exhibits a remarkable chemoselectivity, as acid and ketone functionalities are well tolerated under the reaction conditions. The reaction is easily scalable, high yielding, and nearly instantaneous.     

Single-molecule magnets: a Mn25 complex with a record S = 51/2 spin for a molecular species

The reaction of MnCl2.4H2O (3 equiv), pyridine-2,6-dimethanol (pdmH2) (10 equiv), and NaN3 (10 equiv) in MeOH/MeCN (1:2 v/v) with NMe4OH (1 equiv) gave [Mn25O18(OH)2(N3)12(pdm)6(pdmH)6](Cl)2.12MeCN (1.12MeCN) in approximately 30% yield. The cation of complex 1 comprises five Mnx layers of three types in an ABCBA arrangement. Fitting of variable-temperature and -field magnetization data establishes that 1 has an S = 51/2 ground state, the largest value for a molecular species. The complex also displays hysteresis loops below 0.6 K in magnetization vs applied field sweeps, establishing it as the largest spin single-molecule magnet to date.     

Reactivity of UH3 with mild oxidants

Addition of 2 equiv of I2 to a stirring suspension of UH3 in Et2O results in vigorous gas evolution and the formation of UI4(OEt2)2 (1), which can be isolated in good yields as an air- and moisture-sensitive brick-red powder. Addition of 3 equiv of AgBr to UH3 in DME produces UBr3(DME)2 (2), while addition of 4 equiv of AgX to UH3 in DME-CH2Cl2 provides UX4(DME)2 (X = Br, 3; Cl, 4). Similarly, the reaction of 4 equiv of AgOTf with UH3 in neat DME generates U(OTf)4(DME)2 (5). Each of these reactions proceeds with the evolution of hydrogen. Complex can also be generated by reaction of 4 equiv of Me3SiI with UCl4 in Et2O. All complexes were fully characterized, including analysis by X-ray crystallography.     

Titanium-catalyzed Reformatsky-type reaction

A catalytic titanium mediated Reformatsky reaction is presented. The technique employs cyclopentadienyltitaniumdichloride(IV) (10 mol%) in conjunction with Mn (2 equiv.), as the stoichiometric reductant, and (CF₃CO)₂O (1.5 equiv.), as the scavenger, and it is based on the formation of titanocene(III) chloride as a mild and homogeneous single-electron reductant. The reaction gives moderate yields of the desired Reformatsky adduct, and it works well with aromatic and aliphatic aldehydes.     

Synthesis of α-aminonitriles under mild catalytic,metal-free conditions

α-Aminonitriles have been synthesized by a Strecker synthesis from aldehydes and ketones under mild catalytic, metal-free conditions. Aromatic aldehydes (1 equiv) were reacted with aromatic and 1° or 2° aliphatic amines (1 equiv) in EtOH containing 3 mol % of NH₄Cl to give high yields of α-aminonitriles. An alternative to adding NH₄Cl as a catalyst involved the use of excess TMSCN (1 equiv) and to promote the process. The reaction was also successful under microwave conditions using excess TMSCN with no solvent. Ketones similarly reacted with aromatic amines and excess TMSCN under conventional and microwave heating, but 30 mol % of added NH₄Cl was required for optimum conversion.     

A new general method for the preparation of N-sulfonyloxaziridines

[reaction: see text] A simple procedure to obtain N-alkylsulfonyl- and N-arylsulfonyloxaziridines from the corresponding N-sulfinylimines involving a one-pot, two-step oxidation process with m-CPBA (1 equiv) and m-CPBA/KOH (1.1 equiv) is reported. The method is applicable to N-sulfinylimines derived from aldehydes (aliphatic and aromatic) and ketones (dialkyl and aryl alkyl) and preserves C=C-conjugated double bonds. Almost quantitative yields, very mild conditions (usually less than 5 min at room temperature), and easy purification by filtration are the main features of this new procedure, which can be performed at a gram scale.     

Nucleophilic additions of arylzinc compounds to aldehydes mediated by CrCl(3): efficient and facile synthesis of functionalized benzhydrols, 1(3H)-isobenzofuranones, benzyl alcohols, or diaryl ketones

In the presence of a stoichiometric amount of CrCl(3) and trimethylchlorosilane (TMSCl), nucleophilic addition of arylzinc compounds 1c-h to arylaldehydes 2a,b,g smoothly proceeded at room temperature to yield corresponding benzhydrols 4a-f in good yields. From arylzinc compounds 1a,b, 3-aryl-1(3H)-isobenzofuranones 3a-f were given by the CrCl(3)-mediated reaction with arylaldehydes 2a-f. Diaryl ketones 5a-e were obtained in good yields by the addition of excess amount of benzaldehyde as an oxidant to the resulting solution after the CrCl(3)-mediated reaction between arylzinc compounds 1c-g and arylaldehydes 2b,g was completed. In the nucleophilic additions of arylzinc compounds 1a,d,f to alkyladehydes 6b-f, the treatment of arylzinc compounds with CrCl(3) was required prior to the addition of the aldehydes in order to prevent the fast protodezincation of arylzinc compounds by the enolizable aldehydes. In these CrCl(3)-mediated nucleophilic additions of arylzinc compounds to aldehydes, arylchromium(III) species are probably reactive intermediates.     

Silver,iron, and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 MNPs catalyzed one‐pot five‐component reactions for the synthesis of tetrahydropyridines by tandem condensation of amines,aldehydes, and methyl acetoacetate

In this study, Ag, Ni²⁺, and Fe²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ nanoparticles (γ‐Fe₂O₃@HAp‐Ag, γ‐Fe₂O₃@HAp‐Ni²⁺, and γ‐Fe₂O₃@HAp‐Fe²⁺) as a new and reusable Lewis acid magnetic nanocatalyst was successfully synthesized and reported for an atom economic, extremely facile, and environmentally benign procedure for the synthesis of highly functionalized tetrahydropyridines derivatives 4a‐t is described by one‐pot five‐component reaction of 2 equiv of aldehydes 1 , 2 equiv of amines 2 , and 1 equiv of methyl acetoacetate 3 in EtOH at room temperature in good to high yields and short reaction time. The presented methodology offers several advantages such as easy work‐up procedure, reusability of the magnetic nanocatalyst, operational simplicity, green synthesis avoiding toxic reagents and solvent, mild reaction conditions, and no tedious column chromatographic separation.     

Highly efficient hydrophosphonylation of aldehydes and unactivated ketones catalyzed by methylene-linked pyrrolyl rare earth metal amido complexes

A series of rare earth metal amido complexes bearing methylene-linked pyrrolyl-amido ligands were prepared through silylamine elimination reactions and displayed high catalytic activities in hydrophosphonylations of aldehydes and unactivated ketones under solvent-free conditions for liquid substrates. Treatment of [(Me(3)Si)(2)N](3)Ln(μ-Cl)Li(THF)(3) with 2-(2,6-Me(2)C(6)H(3)NHCH(2))C(4)H(3)NH (1, 1 equiv) in toluene afforded the corresponding trivalent rare earth metal amides of formula {(μ-η(5):η(1)):η(1)-2-[(2,6-Me(2)C(6)H(3))NCH(2)](C(4)H(3)N)LnN(SiMe(3))(2)}(2) [Ln=Y (2), Nd (3), Sm (4), Dy (5), Yb (6)] in moderate to good yields. All compounds were fully characterized by spectroscopic methods and elemental analyses. The yttrium complex was also characterized by (1)H NMR spectroscopic analyses. The structures of complexes 2, 3, 4, and 6 were determined by single-crystal X-ray analyses. Study of the catalytic activities of the complexes showed that these rare earth metal amido complexes were excellent catalysts for hydrophosphonylations of aldehydes and unactivated ketones. The catalyzed reactions between diethyl phosphite and aldehydes in the presence of the rare earth metal amido complexes (0.1 mol%) afforded the products in high yields (up to 99%) at room temperature in short times of 5 to 10 min. Furthermore, the catalytic addition of diethyl phosphite to unactivated ketones also afforded the products in high yields of up to 99% with employment of low loadings (0.1 to 0.5 mol%) of the rare earth metal amido complexes at room temperature in short times of 20 min. The system works well for a wide range of unactivated aliphatic, aromatic or heteroaromatic ketones, especially for substituted benzophenones, giving the corresponding α-hydroxy diaryl phosphonates in moderate to high yields.     

Chalcogenide-Lewis acid mediated reactions of electron-deficient alkynes with aldehydes

Reactions of but-3-yn-2-one (2) with aldehydes 1 in the presence of a Lewis acid and dimethyl sulfide (3 a) predominantly gave (E)-alpha-(halomethylene)aldols 4-5 in high yields, while reactions of methyl propiolate (6 a) mainly afforded (Z)-3-halogeno-2-(hydroxymethyl)acrylates 7-8 in low to moderate yields. A reaction of dimethyl acetylenedicarboxylate (10) with 1 a in the presence of TiCl(4) and 1,1,3,3-tetramethylthiourea (3 c) produced maleate (E)-11 (40 %) and butenolide 12 (40 %). When a reaction of 6 a with 1 a was carried out in the presence of TiBr(4) and 3 a (0.2 equiv) at -20 degrees C for 60 h, 3-(methylthio)-2-(hydroxyalkyl)acrylate 9 a was obtained in an 8 % yield. Experiments were conducted in order to elucidate the formation mechanism of 9 a, and it was made clear that 9 a was formed via the processes of the Michael addition of sulfide 3 a to alkynoate 6 a and an aldol reaction with 1 a and demethylation.     

Preparation of polyfunctional aryl azides from aryl triazenes. A new synthesis of ellipticine, 9-methoxyellipticine, isoellipticine, and 7-carbethoxyisoellipticine

The preparation of polyfunctional aryl azides by the reaction of aryl triazenes with NaN3 in the presence of KHSO4 or BF3.OEt2/TFA (trifluoroacetic acid) has been described. A variety of functional groups (halides, esters, ketones, nitriles, aldehydes, and boronic esters) are tolerated under the Lewis acidic conditions. By using this methodology, the potent antitumor agents, ellipticine and 9-methoxyellipticine, have been synthesized. In addition, isoellipticine and a related derivative, 7-carbethoxyisoellipticine, were also prepared.     

Stereoselective synthesis of polysubstituted 2,5-dihydrofurans from reaction of 1,4-dilithio-1,3-dienes with aldehydes

[reaction: see text] Reaction of 1,4-dilithio-1,3-diene derivatives with 2 equiv of aldehydes affords polysubstituted 2,5-dihydrofurans in good to high yields with perfect regio- and stereoselectivities. Hexa-2,4-diene-1,6-dialcoholates are proposed as the first intermediates, which undergo a cyclization and subsequent elimination of Li(2)O to generate the 2,5-dihydrofuran derivatives.