Automated on-line microdialysis sampling coupled with high-performance liquid chromatography for simultaneous determination of malondialdehyde and ofloxacin in whole blood

We have developed a system that couples an on-line microdialysis (MD) system with flow injection high-performance liquid chromatography (HPLC)-fluorescence detection for simultaneous measurement of the concentrations of malondialdehyde (MDA) and ofloxacin (OFL) in whole blood samples. The sample matrix was first cleaned with an MD system using an MD probe. A continuously flowing dialysate stream was derivatized on-line and auto-injected into a separation column. MDA and OFL were separated through a reverse-phase C18 column (250 mm × 4.6 mm) at a flow rate of 0.8 mL min⁻¹ and then detected using a fluorescence detector (excitation: 532 nm; emission: 553 nm); the system's components were connected on-line using a valve control. Validation experiments demonstrated good linearity, precision, accuracy, and recovery. The precisions for the determinations of MDA and OFL, measured in terms of relative standard deviations, were 6.5% and 4.6%, respectively, for intra-day assays and 7.5% and 8.7%, respectively, for inter-day assays. The average recoveries of MDA and OFL spiked in plasma were each close to 100%. The use of this on-line MD-HPLC system permitted continuous monitoring of MDA and OFL in OFL-treated whole blood subjected to UV-A irradiation. Based on our results, the UV-A irradiation markedly increased the level of MDA in the OFL-treated whole blood.     

The HPTLC separation of malondialdehyde from peroxidised linoleic acid

Peroxidised linoleic acid reacts with acidified thiobarbituric acid to give a chromogen absorbing maximally at 532 nm. This TBA reactant is chromatographically identical to the TBA-MDA adduct formed from linolenic acid and a pure MDA standard. Considerably less MDA is produced by peroxidised linoleic acid compared to that formed from linolenic acid. In this respect the type of acid used for the colour reaction appears to be important.     

Calibration methods for microdialysis sampling in vivo: muscle and adipose tissue

Calibration methods for microdialysis sampling were studied in the muscle and adipose tissue of rats. Both the delivery method and the no-net-flux method were used to determine the extraction efficiency (EE) of acetaminophen and caffeine in both tissues. There was no concentration dependence of the EE either in vitro or in vivo for either acetaminophen or caffeine. The EEs determined by the delivery and no-net-flux methods were not different. However, the EEs of both caffeine and acetaminophen determined in vitro were significantly higher than those determined in the muscle and adipose. This indicates that mass transfer in the tissue is the rate-determining factor for the EE in vivo. The relative difference between the EE in vitro and the EE in the muscle was smaller than the difference between the EE in vitro and the EE in the adipose. In addition, the EE in the muscle decreased more than the EE in the adipose after the animal was euthanized. This indicated that exchange between the extracellular fluid and plasma is the rate-determining step in mass transport relative to microdialysis sampling. This has a more significant effect on the EE in the muscle than the EE in the adipose. Both the delivery and no-net-flux methods can be used to calibrate microdialysis probes in the muscle and adipose.     

In vivo microdialysis determination of collagen-induced serotonin release in rat blood

We developed a sensitive microbore HPLC method coupled with an on-line microdialysis system to simultaneously measure endogenous 5-hydroxytryptamine (serotonin; 5-HT) and its major metabolite 5-hydroxyindoleacetic acid (5-HIAA) in the rat blood in vivo. A dialysis tube was placed in the right jugular vein. The validity of the procedure is demonstrated because analysis of the aggregating agents, collagen (I mg/kg) plus epinephrine (0.3 mg/kg) after intravenous injection, showed that they induced an increase in 5-HT and 5-HIAA levels in the jugular vein of the rat.     

A study of microdialysis sampling of metal ions

A study of the extraction fraction (EF) of metal ions Cd, Cr, Cu, Ni and Pb sampled by microdialysis from a quiescent aqueous solution is presented. A concentric type of microdialysis probe equipped with either one of two polysulfone membranes supplied by different manufacturers or a polyether sulfone membrane, all with a 10 mm effective dialysis length was used for these investigations. EF for metal ions achieved after microdialysis sampling were evaluated for membranes exhibiting a cut-off molecular weight of 3, 5, 10 and 30 kDa. The EF for all metal ions showed a dependency on membrane cut-off as well as membrane material. For Cr EFs of 0.70 and 0.80 were achieved at 1 μl/min using a polysulfone and polyether sulfone membrane, respectively, both with a 30 kDa cut-off molecular weight. Using the polysulfone membrane, Cr showed the highest EF and Pb had the lowest at 0.1. The polyether sulfone membrane achieved an EF of 0.95 for Ni and the lowest EF value was for Cu at 0.35. In these studies it is shown that pH as well as the inclusion of an optimal concentration (0.20 M) of 8-hydroxyquinoline (8-HQ) in the perfusion liquid can enhance the EF of metal ions. Microdialysis was also used to sample for metal ions from wastewater and from whole tomatoes grown using sewage sludge manure in order to demonstrate the potential to apply it to these complicated matrices.     

Field-amplified online sample stacking capillary electrophoresis UV detection for plasma malondialdehyde measurement

Malondialdehyde (MDA) determination is the most widely used method for monitoring lipid peroxidation. Here, we describe an easy field-amplified sample injection (FASI) CE method with UV detection for the detection of free plasma MDA. MDA was detected within 8 min by using 200 mmol/L Tris phosphate pH 5.0 as running buffer. Plasma samples treated with ACN for protein elimination were directly injected on capillary without complex cleanup and/or sample derivatization procedures. Using electrokinetic injection, the detection limit in real sample was 3 nmol/L, thus improving of about 100-fold the LOD of the previous described methods based on CE. Precision tests indicate a good repeatability of our method both for migration times (CV = 1.11%) and for areas (CV = 2.05%). Moreover, a good reproducibility of intra- and inter-assay tests was obtained (CV = 2.55% and CV = 5.14%, respectively). Suitability of the method was tested by measuring MDA levels in 44 healthy volunteers.     

Enhancing the microdialysis recovery for sampling of Cu and Ni by incorporating humic acid in the perfusion liquid

A strategy to enhance the microdialysis relative recovery for sampling of Cu and Ni ions is presented. Enhanced recovery was achieved by incorporating humic acid, a binding agent, in the microdialysis perfusion liquid during sampling from a Cu and Ni standard solution mixture. All microdialysis sampling experiments were carried out at room temperature under quiescent conditions using a concentric type of microdialysis probe with an adjustable effective dialysis length. For all metal determinations electrothermal atomic absorption spectrometry was employed. Metal recoveries were shown to be dependent on the membrane molecular weight cut-off, perfusion rate, sample solution pH, perfusion liquid composition as well as perfusion liquid pH. Complete recoveries (100%) of Cu and Ni were obtained by microdialysis sampling using a 10 kDa molecular weight cut-off polysulfone membrane at a flow-rate of 2 μl/min employing a 0.05% (w/v) optimal composition of humic acid incorporated in the perfusion liquid. The optimal sampling pH of humic acid was determined to be 6 where most oxygen containing functional groups are dissociated and available for metal binding. These data have important ramifications for sampling and determination of metal ions in small sample solutions (∼10 ml) at very low concentrations in the ppb range.     

On-line microdialysis sampling coupled with flame atomic absorption spectrometry for continuous in vivo monitoring of diffusible magnesium in the blood of living animals

A novel on-line microdialysis sampling coupled with flame atomic absorption spectrometry (FAAS) with an attractive application is reported. Microdialysates perfused through implanted microdialysis probes were directly introduced into the flame atomizer of a FAAS system using 0.2% HNO₃ as carrier solution at a nebulizer uptake flow rate of 6 ml min⁻¹. The interval for each determination was 90 s (60 s sampling time, 10 s read time and 20 s washing time). The analytical characteristics of the on-line microdialysis-FAAS system were validated as follows: linearity range, 0-300 mg l⁻¹; detection limit (3σ, n = 7), 0.53 mg l⁻¹; precision (R.S.D., n = 50), 4.1%. By comparing Mg levels in the blood of living rabbits with the results obtained from in vivo no net flux (NNF) method, the accuracy of the proposed on-line method was found to be good. The present method can be successfully applied to the in vivo monitoring of diffusible Mg in the blood of living rabbits after magnesium sulfate (MgSO₄) administration with a temporal resolution of 1.5 min.     

微渗析活体取样与液相色谱安培检测法联用测定鼠脑中黄嘌呤和次黄嘌呤

采用微渗析活体取样技术和高效液相色谱安培检测法 ,测定了鼠脑纹状体中的黄嘌呤和次黄嘌呤。安培检测以玻碳电极为工作电极 ,检测电位为 0 .9V。在 5 .0× 1 0 - 7～ 1 .0× 1 0 - 4 mol/L浓度范围内 ,黄嘌呤和次黄嘌呤的浓度分别与峰电流呈良好的线性关系 ,检出限分别为 8 0× 1 0 - 8mol/L和 3 0× 1 0 - 7mol/L。该方法为生命科学的研究提供了一种新的分析手段     

Determination of dimethylarginine levels in rats using HILIC-MS/MS: an in vivo microdialysis study

Nitric oxide (NO) is one of the most important mediators and neurotransmitters and its levels change under pathological conditions. NO production may be regulated by endogenous nitric oxide synthase (NOS) inhibitors, in particular asymmetric dimethylarginine (ADMA). Most of the interest is focused on ADMA, since this compound is present in plasma and urine and accumulation of ADMA has been described in many disease states but little is known about cerebrospinal fluid (CSF) concentrations of this compound and of its structural isomer symmetric dimethylarginine (SDMA). To determine the levels of methylarginines, we here present a new hydrophilic interaction chromatography (HILIC)-MS/MS method for the precise determination of these substances in CSF from microdialysis samples of rat prefrontal cortex (PFC). The method requires only minimal sample preparation and features isotope-labelled internal standards.     

In vitro and in vivo affinity microdialysis sampling of cytokines using heparin-immobilized microspheres

Heparin-immobilized microspheres were included in microdialysis sampling perfusion fluids under both in vitro and in vivo conditions to improve the recovery of different cytokines, acidic fibroblast growth factor, vascular endothelial growth factor, monocyte chemoattractant protein-1 (or CCL2), and regulation upon activation normal T cell express sequence (or CCL5). Different strategies to dissociate captured CCL2 and CCL5 from the immobilized heparin were attempted, and both cytokines could be quantitatively eluted from the beads using a phosphate buffer (pH 7.4) containing 25% (v/v) acetonitrile which did not interfere with the subsequent detection of cytokine using an ELISA assay. Using these heparin-immobilized microspheres, a two to fivefold increase of microdialysis relative recovery (RR) was achieved for the four cytokines from a quiescent solution. Enhanced microdialysis RR of CCL2 using the heparin-immobilized microspheres from microdialysis probes implanted into the peritoneal cavity of a rat was performed to test the in vivo application. This work suggests that the heparin-immobilized microspheres provide an alternative affinity agent to the previously used antibody-immobilized microspheres for enhanced microdialysis sampling of cytokines.     

Development of a push-pull microdialysis sampling technique for the quantitative determination of proteins

Summary An on-line push-pull sampling technique has been developed for continuous analysis of proteins of molecular weight from 5.7 to 67 kDa. The characteristics of the system include gradient elution with a total cycle time of 21 min, membrane stability, unattended automatic operation, and adjustment of the sampling mode and extraction fraction (the ratio of the concentration of analyte in the dialysate to that in the sample) by varying the effective dialysis length. The push and pull flow rates were adjusted in a manner which enabled three different modes of operation. When push-pull microdialysis was compared with conventional microdialysis sampling, significantly higher extraction fractions were obtained for all five model proteins studied. The technique has been applied to the quantification of proteins in cell samples. On-line fractionation enabled complementary MS identification of the proteins present.     

A study of the use of microdialysis probes as a sampling unit in on-line bioprocess monitoring in conjunction with column liquid chromatography

Summary An automated on-line sampling and analytical set-up for the control of fermentations was studied incorporating a microdialysis probe as the sampling device. Applications to a penicillin broth and an ethanol fermentation were studied. Typical recovery values of carbohydrates were found to be close to 100% even after exposure of the microdialysis probe in the process for about 30 h.     

Combining high-performance liquid chromatography with on-line microdialysis sampling for the simultaneous determination of ascorbyl glucoside, kojic acid, and niacinamide in bleaching cosmetics

We have used on-line microdialysis sampling coupled with high-performance liquid chromatography and UV-vis detection to simultaneously determine the contents of ascorbyl glucoside (AA-2G), kojic acid (KA), and niacinamide (VitB₃) in commercial bleaching cosmetics. Our results indicate that AA-2G, KA, and VitB₃ separated well within 4.5 min on a reverse-phase Hypersil Fluophase PFP column when eluting with 0.020 M phosphate buffer solution in 40% (v/v) methanol at pH 5.5. The calibration curves were linear over the ranges 0.068-304, 0.071-284, and 0.024-488 μg mL⁻¹ for AA-2G, KA, and VitB₃, respectively, with correlation coefficients for the linear regression analyses falling within the range 0.9982-0.9999. The detection limits for AA-2G, KA, and VitB₃ were 0.01, 0.01, and 0.007 μg mL⁻¹, respectively. The detection wavelength was robust when the levels of the analytes in the samples were high (0.1-2%). The analytes were all detected using ultraviolet light (254 nm). The compounds diffuse through the membrane more readily when KA and VitB₃ are in their molecular forms and AA-2G is ionized. The recoveries were in the range 92-106% with good reproducibility (R.S.D. = 3.9-8.7%). We used this procedure to assay six commercially available bleaching cosmetics; our results confirmed not only the precision of the method but also the claims made on the labels of the cosmetics. This approach provides a very simple means to determine the contents of AA-2G, KA, and VitB₃ in various dosages in bleaching cosmetics.     

In vivo sampling using loop microdialysis probes coupled to a liquid chromatograph.

Microdialysis probes with longer membranes (20-100 mm) provide increased relative recovery over traditional shorter probes (1-4 mm) developed for neuroscience applications. The characterization and optimization of "straight through" or "loop type" probes for use in subcutaneous tissue are considered. Membrane area, probe size, inlet and outlet tubing dimensions, and flow-rate are examined for their effects on relative recovery, the total collection rate, and bulk flow through the membrane wall. Polyacrylonitrile and regenerated cellulose membrane fibers with different geometries were compared. Sampling probes used fibers 3-10 cm long. Inlet and outlet tubing was varied from 25 to 110 microns I.D. with lengths of 10 to 50 cm. Probe configurations optimized for relative recovery, flow-rate, and utility for in vivo use are presented. Utilizing microdialysis probes with large membrane surface areas results in relative concentration recovery of greater than 50% at flow-rates of greater than 5 microliters/min. Therapeutic drug monitoring in subcutaneous tissue of awake animals is explored.     

Application and optimization of organic–inorganic hybrid monolithic capillary electrochromatography for in vivo cefdinir determination with microdialysis

In this study, an organic–inorganic hybrid monolithic capillary column was applied and optimized for the determination of cefdinir in plasma, and the electro‐osmotic flow that usually hinders migration in reverse polarity became a driving force. The Sample used for pharmacokinetic research was collected by microdialysis using phosphate buffer (pH 7.4) as perfusate, and a volume of 60 μL fluid was mixed with 140 μL of acetonitrile. By using a silica‐allyldimethyldodecylammonium monolithic column (100 μm inner diameter, 21 cm effective length and 31.2 cm total length), and a mobile phase consisting of phosphate and acetonitrile (pH 4.5, 50:50, v/v), at a voltage of 20 kV, the analytes were successfully separated with the background within 2.5 min. The detection wavelength was 214 nm. The calibration curve showed a good linearity (r² = 0.9994) over the concentration range of 0.2–50 μg/mL. The proposed method showed good specificity, linearity, sensitivity, precision and recovery, and the introduction of field amplified sample stacking helped to improve the low recovery caused by microdialysis. This method was successfully applied to quantify cefdinir in rat plasma to support a pre‐clinical pharmacokinetic trial.     

Microdialysis sampling and monitoring of uric acid in vivo by a chemiluminescence reaction and an enzyme on immobilized chitosan support membrane

A new detection system based on microdialysis sampling and chemiluminescence (CL) reaction was developed for in vivo monitoring of uric acid (UA) with high sensitivity, selectivity and accuracy. The uric acid is indirectly monitored by CL detection of enzymatic reaction product formation (H₂O₂), catalyzed by Uricase. A microprobe was modified and coated with immobilized enzyme through a Streptavidin-biotin mediated linker by using a chitosan support membrane, polyurethane trapped ferrocene film is employed to protect the probe surface and diminish the interference from reductant molecules, which often are present in the blood (e.g. ascorbic acid). The earlier mentioned probe and the constructed sensor can detect uric acid in the range of 0.01-1 mM with detection limit (3σ) of 5 μM. Finally, the system is used to monitor uric acid (UA) variation through an acute myocardial infarction (AMI) model. Following AMI-induced oxidative stress, the UA level decreases continuously, thus suggesting that UA plays a protective role as a substitute antioxidant. Furthermore, the in vivo monitoring results show good agreement with those obtained by a standard method, and the procedure is recommended for in vivo and real time monitoring of UA. In addition, the proposed method can be more accurate since the UA may be potentially oxidized by in vitro exposure to oxygen in the presence of a catalyst.     

微渗析-液相色谱电化学检测法测定全血中的半胱氨酸和谷胱甘肽

采用微渗析取样作为样品预处理技术,与高效液相色谱电化学检测联用,建立了一种测定血中半胱氨酸(Cys)和谷胱甘肽(GSH)的新方法。电化学检测以玻碳电极为工作电极,结果表明在3.5×10-6～1.0×10-3mol/L浓度范围内,Cys和GSH的浓度分别与氧化峰的峰电流呈良好的线性关系,线性相关系数分别为0.9971和0.9982,检测限分别为1.2×10-6mol/L和3.2×10-6mol/L。     

Automated derivatization and analysis of malondialdehyde using column switching sample preparation HPLC with fluorescence detection

Analyte derivatization is advantageous for the analysis of malondialdehyde (MDA) as a biomarker of oxidative stress in biological samples. Conventionally, however, derivatization is time consuming, error-prone and has limited options for automation. We have addressed these challenges for the solid phase analytical derivatization of MDA from small volume tissue homogenate samples. A manual derivatization method was first developed using Amberlite XAD-2 (12 mg) as the solid phase. Subsequently an automated column switching process was developed that provided simultaneous derivatization and extraction of the MDA-DH hydrazone product on a cartridge packed with XAD-2, followed by quantitative elution of the product to an analytical LC column (Waters NovoPak C18, 3.9 x 150 mm). The LOD was 0.02 microg/mL and recovery was quantitative. The method was linear (r(2) >0.999) with precision < 5% from the LOQ (0.06 microg/mL) to at least 35 microg/mL. The method was successfully applied to the analysis of small volume (30 microL) mouse tissue homogenate samples. Endogenous levels of MDA in the tissues ranged from 20 to 40 nmol/g tissue (ca. 0.1-0.2 microg/mL homogenate). Compared to conventional MDA analyses, the current method has advantages in automation, selectivity, precision and sensitivity for analysis from very small sample volumes.     

Recent trends in microdialysis sampling integrated with conventional and microanalytical systems for monitoring biological events: A review

Microdialysis (MD) is a sampling technique that can be employed to monitor biological events both in vivo and in vitro. When it is coupled to an analytical system, microdialysis can provide near real-time information on the time-dependent concentration changes of analytes in the extracellular space or other aqueous environments. Online systems for the analysis of microdialysis samples enable fast, selective and sensitive analysis while preserving the temporal information. Analytical methods employed for online analysis include liquid chromatography (LC), capillary (CE) and microchip electrophoresis and flow-through biosensor devices. This review article provides an overview of microdialysis sampling and online analysis systems with emphasis on in vivo analysis. Factors that affect the frequency of analysis and, hence, the temporal resolution of these systems are also discussed.