温度和pH值双敏感的生物相容性三嵌段共聚物聚(2-乙基-2-噁唑啉)-b-聚(ε-己内酯)-b-聚(L-谷氨酸)的合成和表征

研究了由温敏的聚(2-乙基-2-噁唑啉)和pH值敏感的聚(L-谷氨酸)组成的三嵌段共聚物,聚(2-乙基-2-噁唑啉)-b-聚(ε-己内酯)-b-聚(L-谷氨酸)的合成方法,(1)以对甲苯磺酸甲酯为引发剂引发2-乙基-2-噁唑啉进行正离子开环聚合反应,得到了羟基封端的聚(2-乙基-2-噁唑啉)(PEOz-OH);(2)以PEOz-OH为引发剂,以辛酸亚锡为催化剂,在氯苯中合成了PEOz-b-聚(ε-己内酯)两嵌段共聚物(PEOz-b-PCL-OH);(3)将PEOz-b-PCL-OH末端的羟基转换为氨基,得到氨基封端的两嵌段共聚物(PEOz-b-PCL-NH2);(4)以PEOz-b-PCL-NH2为引发剂引发γ-苄基-L-谷氨酸-N-羧酸酐(BLG-NCA)开环聚合,得到了PEOz-b-PCL-b-聚(γ-苄基-L-谷氨酸)(PEOz-b-PCL-b-PBLG)三嵌段共聚物;(5)以HBr的醋酸溶液为脱保护剂脱去苄基保护基,得到PEOz-b-PCL-b-聚(L-谷氨酸)(PEOz-b-PCL-b-PLGlu)三嵌段共聚物.采用1H-NMR、GPC和FT-IR表征了各步聚合物的结构、分子量和分子量分布.     

温度和pH值双敏感的生物相容性三嵌段共聚物聚(2-乙基-2- 唑啉)-b-聚(ε-己内酯) -b-聚(L-谷氨酸)的合成和表征

研究了由温敏的聚(2-乙基-2-噁唑啉)和pH值敏感的聚(L-谷氨酸)组成的三嵌段共聚物,聚(2-乙基-2-噁唑啉)-b-聚(ε-己内酯)-b-聚(L-谷氨酸)的合成方法,(1)以对甲苯磺酸甲酯为引发剂引发2-乙基-2-噁唑啉进行正离子开环聚合反应,得到了羟基封端的聚(2-乙基-2-噁唑啉)(PEOz-OH);(2)以PEOz-OH为引发剂,以辛酸亚锡为催化剂,在氯苯中合成了PEOz-b-聚(ε-己内酯)两嵌段共聚物(PEOz-b-PCL-OH);(3)将PEOz-b-PCL-OH末端的羟基转换为氨基,得到氨基封端的两嵌段共聚物(PEOz-b-PCL-NH2);(4)以PEOz-b-PCL-NH2为引发剂引发γ-苄基-L-谷氨酸-N-羧酸酐(BLG-NCA)开环聚合,得到了PEOz-b-PCL-b-聚(γ-苄基-L-谷氨酸)(PEOz-b-PCL-b-PBLG)三嵌段共聚物;(5)以HBr的醋酸溶液为脱保护剂脱去苄基保护基,得到PEOz-b-PCL-b-聚(L-谷氨酸)(PEOz-b-PCL-b-PLGlu)三嵌段共聚物.采用1H-NMR、GPC和FT-IR表征了各步聚合物的结构、分子量和分子量分布.     

丁二烯-2-乙基-2-噁唑啉嵌段共聚物的合成及表征

采用阴离子转阳离子的机理转移聚合方法 ,两步合成了丁二烯 2 乙基 2 唑啉二嵌段共聚物 (PBd b PEOx) ;第一步阴离子聚合丁二烯 ,然后使其带上端功能基团 ;第二步是 2 乙基 2 唑啉的阳离子开环聚合 .对产物用IR ,1HNMR ,GPC ,DMA ,TEM和SAXS等手段进行了广泛的结构表征 .结果表明 ,所得嵌段共聚物具有较高分子量和窄的分子量分布 ,而且其中的聚丁二烯段中的 1 ,4 结构含量可通过反应条件的控制来调节 .     

超支化聚苯乙烯-线型聚苯乙烯-超支化聚甲基丙烯酸甲酯三嵌段聚合物的合成与表征

合成了超支化聚苯乙烯-线型聚苯乙烯-超支化聚甲基丙烯酸甲酯三嵌段聚合物(HPS-b-LPS-b-HPMMA). 首先分别合成了带有炔基和溴的三硫代碳酸酯(ATC和BTC), 然后通过苯乙烯(St)的可逆加成-断裂链转移(RAFT)聚合, 制得端炔基和端基溴的线型聚苯乙烯大分子RAFT试剂, 然后将大分子RAFT试剂的溴末端转化为叠氮末端. 接着在大分子RAFT试剂存在情况下, 通过自缩合原子转移自由基共聚合(SCATRCP)分别制得端炔基超支化聚苯乙烯-线型聚苯乙烯(HPS-b-LPS)和端叠氮基超支化聚甲基丙烯酸甲酯-线型聚苯乙烯(HPMMA-b-LPS)两嵌段聚合物. 最后将两种两嵌段聚合物通过点击(click)反应偶合, 得到不对称的超支化-线型-超支化三嵌段聚合物HPS-b-LPS-b-HPMMA. 核磁共振氢谱(¹H NMR)、凝胶渗透色谱(GPC)结果表明, 所得产物分子量可控, 得到了预期结构的聚合物.     

氧化响应性含硒聚己内酯-b-聚磷酸酯三嵌段 聚合物胶束的合成及性能

以聚己内酯为大分子引发剂、异辛酸亚锡为催化剂引发磷酸酯单体2-乙氧基-2-氧-1,3,2-二氧磷酸酯环戊烷(EOP)开环聚合得到二嵌段的聚己内酯-b-聚磷酸酯聚合物PCL-PEEP。以1-(3-二甲氨基丙基)-3-乙基碳二亚胺,4-二甲氨基吡啶为偶合催化体系,以新合成的二羧酸含硒小分子3,3′-硒代二丙酸(Se-DCP)为偶联剂,得到含硒三嵌段聚合物PCL-PEEP-Se-PEEP-PCL,并采用溶剂挥发法制备该聚合物的胶束。通过核磁共振、红外光谱和凝胶渗透色谱对聚合物的结构进行了表征,通过荧光光谱、核磁共振氢谱、动态光散射和透射电镜对聚合物胶束的临界胶束浓度和氧化响应性进行了分析表征,利用噻唑蓝(MTT)比色法评价了聚合物胶束的生物相容性。结果表明:硒元素成功引入到聚合物中;聚合物胶束的临界胶束质量浓度为0.022mg/mL,胶束为平均粒径约91nm的球形;在过氧化氢的氧化条件下,胶束粒径出现不规则变化且球形胶束发生解组装;聚合物胶束具有良好的生物相容性。     

模仿绿色荧光蛋白的荧光聚合物的合成和光学性质研究

受绿色荧光蛋白(GFP)荧光增强原理启发,采用开环聚合制备了两亲性聚乙二醇-生色团-聚己内酯(PEG-c-PCL)嵌段聚合物.通过核磁共振氢谱和碳谱(1H-,13C-NMR)、傅立叶变换红外光谱(FTIR)、凝胶渗透色谱(GPC)和紫外可见吸收光谱(UV-Vis)等证明其结构和性质.生色团和聚合物有相似的紫外吸收光谱,且最大吸收峰都在371 nm.荧光发射光谱表明,生色团的发射峰在427 nm,但聚合物的荧光发射峰出现了6 nm的红移,这是高分子化引起的结果.透射电镜(TEM)和动态光散射(DLS)证明了该两亲性嵌段聚合物能够组装成为纳米粒子.当聚合物组装成纳米粒子后,荧光强度增大了55倍,并且荧光发射峰出现了14 nm的红移,这些现象可归结于荧光生色团自由旋转的限制和组装导致的相互作用增强.     

纤维蛋白在聚(2-甲基-2-噁唑啉)/聚丙烯酸混合聚合物刷上的吸附-脱附行为

以聚多巴胺(PDA)为黏结剂,在硅、玻璃和金的表面制备了由具有抗蛋白质吸附功能的聚(2-甲基-2-噁唑啉)(PMOXA)和具有刺激响应性的聚丙烯酸(PAA)组成的混合聚合物刷.通过X-射线光电子能谱(XPS)、可变角光谱椭偏仪(VASE)对其进行了表征,并利用水接触角(WCA)研究了聚合物刷表面的亲/疏水性.选取pH?...     

嵌段聚合物PGMA-b-PDEAEMAx的合成及其CO2诱导解组装行为

以甲基丙烯酸二乙基氨基乙酯为疏水段,聚甲基丙烯酸甘油酯为亲水段,采用可逆加成-断裂转移聚合合成了具有不同嵌段比例的甲基丙烯酸甘油酯-b-甲基丙烯酸二乙氨基乙酯二嵌段聚合物(PGMA-b-PDEAEMAx),其结构经1H NMR和GPC表征。聚合物通过自组装形成球形胶束、线性胶束聚集体和囊泡结构;向聚合物溶液中通入CO2后,其自组装解体。     

聚(L-丙氨酸)-聚羟乙基谷氨酰胺双嵌段两亲性共聚多肽的合成及其在水溶液中的自组装

利用光气法分别以L-谷氨酸和L-丙氨酸为原料,合成了γ-谷氨酸苄酯-NCA单体和L-丙氨酸-NCA单体,再以三乙胺为引发剂,合成了聚(L-丙氨酸)-聚(γ-谷氨酸苄酯)(PLA50-b-PBLG20)双嵌段共聚多肽,并用乙醇胺对其中的PBLG嵌段进行亲核取代,把疏水性的苄酯侧链变为亲水性的羟烷酰胺侧链,得到双亲性的聚(L-丙氨酸)-聚羟乙基谷氨酰胺(PLA-b-PHEGA)双嵌段共聚多肽.利用红外光谱和核磁共振谱对产物进行了表征,用TEM研究了双嵌段共聚多肽PLA50-b-PHEGA20在水溶液中的自组装.研究结果表明,双嵌段共聚多肽在水溶液中可自组装形成囊泡.     

3-氨基-4-氧代氰基呋咱捕获与表征

3,4-双(4-氨基呋咱-3-基)氧化呋咱由活性中间体3-氨基-4-氧代氰基呋咱分子间发生二聚获得,但3-氨基-4-氧代氰基呋咱不稳定,无法通过分离、纯化及光谱鉴定证实其存在.采用4种不同的烯烃与3-氨基-4-氧代氰基呋咱发生1,3-偶极环加成反应得到3-(4-氨基呋咱-3-基)-5-氰基-Δ2-异噁唑啉、3-(4-氨基呋咱-3-基)-5-乙酰氧基-Δ2-异噁唑啉、3-(4-氨基呋咱-3-基)-5-正丁基-Δ2-异噁唑啉及3-(4-氨基呋咱-3-基)-环己烷并-Δ2-异噁唑啉4种Δ2-异噁唑啉衍生物;采用苯甲酰氯为捕获剂,与3-氨基-4-氧代氰基呋咱反应获得了3-氨基-4-(N-苯甲酸基氨基羰基)呋咱化合物;通过红外光谱、核磁共振光谱、质谱、元素分析表征了5种新化合物的结构,提供了活性中间体3-氨基-4-氧代氰基呋咱存在的间接证据.     

超支化聚乙烯亚胺-聚天冬氨酸苄酯共聚物的制备及性能

以超支化聚合物聚乙烯亚胺为引发剂, 天冬氨酸苄酯-NCA为单体, 利用热开环聚合法合成了超支化聚乙烯亚胺-聚天冬氨酸苄酯共聚物(PEI-PBLA). 用核磁共振波谱对PEI-PBLA的化学结构进行了表征. 研究了PEI-PBLA在水溶液及有机溶液中的自组装行为. 以芘为荧光探针测定了共聚物在水中形成胶束的临界胶束浓度. 以甲基橙为客体分子, 研究了共聚物胶束的包覆能力, 结果表明, 共聚物对客体分子的吸附与溶液的pH值有关. 研究了共聚物与质粒DNA的复合发现, PEI-PBLA能够很好地与质粒DNA复合, 并且可以避免DNA酶的降解, 对其起到一定的保护作用. 此聚合物在药物传输、可控释放及基因载体等方面都有着潜在的应用价值.     

Synthesis of amphiphilic poly(ether-amide) dendrimer endcapped with poly(ethylene glycol) grafts and its solubilization to salicylic acid

An amphiphilic dendrimer (DPEA-PEG) grafting polyethylene glycol at the terminals was prepared by endcapping of dendritic poly(ether-amide) (DPEA) with isocyanate terminated linear polyethylene glycol (PEG-NCO). The molecular structure was verified by gel permeation chromatography (GPC), ¹H NMR and FT-IR. The micelle characteristic of DPEA-PEG in water was investigated. The critical micelle concentration (CMC) was determined by a fluorescence technique to be 55.5 mg/L. The hydrodynamic radius of micelles was measured by dynamic light scattering (DLS) to be 76.2 nm. The UV–vis spectrum showed that the solubility of salicylic acid increased from 1.91 to 2.78 mg/L when the concentration of DPEA-PEG attained 5 mg/mL in an aqueous solution.     

Non-surface activity and micellization behavior of cationic amphiphilic block copolymer synthesized by reversible addition-fragmentation chain transfer process

Cationic amphiphilic diblock copolymers of poly(n-butylacrylate)-b-poly(3-(methacryloylamino)propyl)trimethylammonium chloride) (PBA-b-PMAPTAC) with various hydrophobic and hydrophilic chain lengths were synthesized by a reversible addition-fragmentation chain transfer (RAFT) process. Their molecular characteristics such as surface activity/nonactivity were investigated by surface tension measurements and foam formation observation. Their micelle formation behavior and micelle structure were investigated by fluorescence probe technique, static and dynamic light scattering (SLS and DLS), etc., as a function of hydrophilic and hydrophobic chain lengths. The block copolymers were found to be non-surface active because the surface tension of the aqueous solutions did not change with increasing polymer concentration. Critical micelle concentration (cmc) of the polymers could be determined by fluorescence and SLS measurements, which means that these polymers form micelles in bulk solution, although they were non-surface active. Above the cmc, the large blue shift of the emission maximum of N-phenyl-1-naphthylamine (NPN) probe and the low micropolarity value of the pyrene probe in polymer solution indicate the core of the micelle is nonpolar in nature. Also, the high value of the relative intensity of the NPN probe and the fluorescence anisotropy of the 1,6-diphenyl-1,3,5-hexatriene (DPH) probe indicated that the core of the micelle is highly viscous in nature. DLS was used to measure the average hydrodynamic radii and size distribution of the copolymer micelles. The copolymer with the longest PBA block had the poorest water solubility and consequently formed micelles with larger size while having a lower cmc. The "non-surface activity" was confirmed for cationic amphiphilic diblock copolymers in addition to anionic ones studied previously, indicating the universality of non-surface activity nature.     

含铕荧光两亲接枝共聚物的制备及胶束化行为

以丙烯酸(AA)、 苯甲酸(BA)和邻菲啰啉(Phen)为配体, Eu³⁺为中心离子, 制备了可聚合荧光配合物单体, 并以此单体为功能单体, 聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA)和甲基丙烯酸六氟丁酯(HFMA)为共聚单体, 通过溶液聚合制备出含铕两亲荧光接枝共聚物P-[HFMA-co-Eu(AA)(BA)₂Phen]g-PEG. 利用红外光谱(FTIR)和核磁共振波谱(¹H NMR和¹⁹F NMR)对共聚物的结构进行表征; 采用表面张力法测定共聚物的临界胶束浓度(cmc)为0.20 g/L; 通过透射电子显微镜(TEM)和动态光散射仪(DLS)观察胶束的形貌及其胶束化行为, 发现该共聚物可以形成大小均一的球形胶束, 且随着共聚物浓度的提高, 胶束粒径相应增大; 在溶液浓度达到临界胶束浓度时, 溶液荧光出现强度突变.     

Amphiphilic poly(ethylene glycol)-b-poly(ethylene brassylate) copolymers: One-pot synthesis,self-assembly,and controlled drug release

A set of amphiphilic poly(ethylene glycol)-b-poly(ethylene brassylate) (PEG-b-PEB) copolymers based on the PEB hydrophobic block was first synthesized by ring-opening polymerization of ethylene brassylate with an organic catalyst. The EB/PEGmolar ratios and reaction times were adjusted to achieve different chain lengths of PEB. Block copolymers that were characterized by ¹H NMR and GPC could selfassemble into multimorphological aggregates in aqueous solution, which were characterized by DLS and TEM. The hydrophobic doxorubicin (DOX) was chosen as a drug model and successfully encapsulated into the nanoparticles. The release kinetics of DOX were investigated.     

ABA型聚L-丙氨酸-聚乙二醇嵌段共聚物的合成及其表征

利用L-α-丙氨酸和三聚光气反应制备了N-羧基-α-丙氨酸-环内酸酐(NCA).以聚乙二醇(PEG)为原料.制备了端氨基聚乙二醇(PEG-NH₂),并以此作为引发剂,引发NCA开环聚合.合成了不同组成和分子量的聚L-丙氨酸-聚乙二醇(PLAA-PEG-PLAA)嵌段共聚物.利用IR、¹H NMR、DSC、WAXD、CD等方法对共聚物结构进行了表征.结果表明,PEG-NH₂引发NCA开环聚合得到的是嵌段共聚物,通过¹H NMR谱得到共聚物组成及数均分子量;引入PEG的结果使聚L-丙氨酸的亲水性有所改善;CD测诚结果表明共聚物在水溶液中主链主要以α-螺旋构象存在.     

Copolymer of tetraethylenepentamine and ethylene glycol diacrylate: Synthesis and degradation

A degradable polycation with high density of discrete charge was synthesized from tetraethylenepentamine (TEPA) and ethylene glycol diacrylate (EGDA) based on Michael addition and amidation. The cationic polymer synthesized here was denoted as PTE. Polymerization was monitored by ¹H NMR spectroscopy. According to ¹H NMR spectra, Michael addition proceeded more rapidly than amidation. After 6 h, there were no double bonds left, while amidation existed throughout the polymerization. In addition, when PTE was synthesized in chloroform and dichloromethane, respectively, there were some structural differences as shown by ¹H NMR spectroscopy. The degradation laws of PTE in aqueous solution were studied by ¹H NMR and viscosity measurements. When PTE was dissolved in deionized water, degradation proceeded in high velocity. However, in NaH₂PO₄ aqueous solution, degradation was slowered. Degradation at 37 °C proceeded obviously more rapidly than that at 25 °C. A certain degree of amidation facilitated the reduction of degradation velocity. The effect of concentration on degradation was not obvious. Interestingly, PTE synthesized in CHCl₃ was degraded more rapidly than that in CH₂Cl₂.     

Preparation and characterization of temperature and pH-sensitive chitosan material and its controlled release on coenzyme A

A novel copolymer P(CS–Ma–DMAEMA) was synthesized with chitosan (CS), maleic anhydride (Ma) and 2-(dimethylamino)ethyl methacrylate (DMAEMA) by grafting and copolymerization. The copolymer obtained was analyzed by FT-IR, ¹H NMR and UV, and the molecular weight and polydispersity were determined by gel permeation chromatography (GPC). The average size and distribution of copolymer micelles were determined by dynamic light scattering (DLS). Their aqueous solution properties and controlled coenzyme A delivery were also studied. It was found that the copolymer had temperature sensitivity and pH sensitivity. The factors affecting release behavior, such as concentration, pH and temperature were discussed in this paper. The higher concentration of the copolymer aqueous solution absorbed more coenzyme A than the lower one. The increasing temperature accelerated the drug release from the copolymer. The pH of the copolymer solution had significant impact on the release of coenzyme A. The results suggested that the novel copolymer could be used as drug delivery carrier.     

Hierarchical self-assembly of 3D amphiphilic discrete organoplatinum(Ⅱ)metallacage in water

Here we described the design and synthesis of a discrete 3D amphiphilic metallacage 4,in which the tetragonal prismatic frameworks act as the hydrophobic cores and the poly(ethylene glycol)(PEG)chains as the hydrophilic tails.The structure of 4 was characterized by 1H NMR,31P NMR and electrospray ionization time-of-flight mass spectrometry(ESI-TOF-MS).Notably,4 with its Iong PEG tails was subsequently ordered into micelles at a low concentration(1.20×10^-6 mol/L)in water.As the concentration and cultivation time increased,the micelles can further self-assembly into nanofibers and nanoribbons.Considering the dynamic property of the coordination bond,these structures show reversible transformation under external stimuli.     

Microstructure determination of N-vinyl-2-pyrrolidone/butyl acrylate copolymers by NMR spectroscopy

The copolymer composition of N-vinyl-2-pyrrolidone/butyl acrylate (V/B) copolymers was determined from the quantitative ¹³C{¹H} NMR spectra. The monomer reactivity ratios for N-vinyl-2-pyrrolidone (V) and butyl acrylate (B) were found to be r_V=0.11±0.07, r_B=0.54±0.19, using the Kelen–Tudos and non-linear least-square error-in-variable (EVM) methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers are overlapping and complex. The complete spectral assignment of the carbon and proton NMR spectra were done by employing distortionless enhancement by polarization transfer (DEPT) and two-dimensional (2D) ¹³C–¹H heteronuclear single quantum correlation spectroscopy experiments. The 2D total correlation spectroscopy (TOCSY) (¹H–¹H homonuclear TOCSY) NMR spectrum was used to ascertain the various geminal and vicinal couplings in the copolymer.