痕量雌二醇的吸附方波伏安法检测

本文报道一种简便、快速、灵敏检测痕量雌激素的吸附溶出方波伏安法。该法先将雌二醇在玻碳电极上吸附富集一定时间 ,然后以方波伏安溶出法检测其氧化电流。介质为含有 8× 1 0 - 5mol· L- 1溴化十六烷基三甲铵 ( CTAB)的 0 .1 mol· L- 1磷酸盐缓冲溶液 ( p H=1 0 .0 )。该法检出限为 5× 1 0 - 8mol· L- 1,线性范围为 5 .2× 1 0 - 7～ 5× 1 0 - 5mol· L- 1。研究了雌二醇的电极反应机理     

单扫示波极谱法同时测定钴与镍

在 pH 9.70的Na2 CO3 NaHCO3、亚硝基红盐和氯代十四烷基吡啶体系中 ,镍和钴均有灵敏的络合物吸附波 ,其二阶导数峰电位分别为 - 0 .6 4V (vs .SCE) (镍 )和 - 0 .80V (vs .SCE)(钴 ) ,电流峰高与浓度在 3.4× 10 - 9～ 3.74× 10 - 6 mol·L- 1(镍 )和 7.0× 10 - 11～ 6 .0× 10 - 6 mol·L- 1(钴 )范围内呈线性关系 ,检出限分别为 2 .4× 10 - 9mol·L- 1(14 1ng·L- 1镍 )和 3.2× 10 - 11mol·L- 1(1.9ng·L- 1钴 )。方法应用于水样和生物样品中微量钴和镍的测定 ,结果满意     

钴氢氧化物修饰玻碳电极的镀膜/循环伏安法制备及其电化学行为

采用一种新方法镀膜 /循环伏安法成功制备了钴氢氧化物修饰玻碳电极 .考察了影响钴氢氧化物膜电催化活性的因素 ,确定最佳富集时间为 2min ,最佳活性单元浓度为 9 90× 10 -4mol·L-1.讨论了成膜过程及机理 .膜氧化峰电流 (i0pa)与扫描速率 (v <0 60V·s-1)成正比 ,具有表面吸附反应特征 ,表面覆盖量约相当于 0 5个单层的氧化还原活性物质 .制得的钴氢氧化物膜修饰电极具有相当的稳定性 ,并对H2 O2 氧化表现出较高的电催化活性 .线性回归方程为 :Δipa( μA) =-2 10 3 6+2 3 72 0× 10 4CH2 O2 (mol·L-1) (R =0 9990 ,n =18) ,线性范围为 :1 43× 10 -5～ 1 80× 10 -2 mol·L-1,检出限为 :9 5 9× 10 -6mol·L-1( 3S/k) .     

二次微分简易示波伏安法直接测定酒样中半胱氨酸

在 0 .2mol·L- 1NaOH支持电解质溶液中 ,半胱氨酸在二次微分简易示波伏安图阴极支- 0 .4 9V(vs .SCE)处产生一灵敏的峰 ,研究了半胱氨酸在此底液中的示波伏安行为 ,并据上述示波特性建立了二次微分简易示波伏安法直接测定酒中半胱氨酸含量的新方法。校正曲线的线性范围为 3.0× 10 - 6 ～ 5 .0× 10 - 5mol·L- 1,相关系数为 0 .9995 ,检出限为 1× 10 - 6 mol·L- 1,对 1.0×10 - 5mol·L- 1半胱氨酸进行 6次测定的RSD为 1.8%。利用此法测定了啤酒、黄酒及加饭酒中半胱氨酸的含量 ,样品的回收率分别为 94 .2 %、10 1.6 %和 10 2 .2 %。方法具有仪器装置简单、经济 ,方法简便快速、无需通氮除氧以及对样品进行前处理的优点     

方波吸附溶出伏安法同时测定水中痕量铜和镉

报道了应用方波吸附溶出伏安法 (OSWSV)同时测定Cu(Ⅱ )和Cd(Ⅱ )。在 0 .0 1mol·L- 1酒石酸钾钠 2 .0× 10 - 4mol·L- 1水杨醛肟溶液中 (pH 11.75 ) ,Cu(Ⅱ )和Cd(Ⅱ )分别与水杨醛肟形成的络合物均产生非常灵敏的还原波 ,峰电位分别为 - 0 .5 5 6V和 - 0 .70 4V (vs.Ag/AgCl以下均同 )。峰电流与Cu(Ⅱ )、Cd(Ⅱ )浓度分别在 9.0× 10 - 74 .0× 10 - 8mol·L- 1和 2 .0× 10 - 6 6 .0×10 - 8mol·L- 1范围内呈线性关系 ,检出限均为 1.0× 10 - 8mol·L- 1。该法用于同时测定水样中痕量Cu(Ⅱ )和Cd(Ⅱ ) ,所得结果满意。通过对该体系的初步研究 ,Cu(Ⅱ )、Cd(Ⅱ )与水杨醛肟形成的络合物的还原峰具有明显的吸附性。     

β-环糊精-二次微分简易示波伏安法测定苯巴比妥

在NaOH底液中 ,β 环糊精能够产生灵敏切口 ,且该切口深度随苯巴比妥 β 环糊精包结物量的增加而变浅。根据 β 环糊精的示波特性 ,建立了用二次微分简易示波伏安法间接测定苯巴比妥注射液中苯巴比妥含量的新方法。苯巴比妥的浓度在 2 .5× 10 - 6 ～ 4 .5× 10 - 5mol·L- 1范围内的回归方程为h(V) =4 .5 5 9- 1.381× 10 4 c(mol·L- 1) ,相关系数为 - 0 .9976 ,检出限为 1.5×10 - 6 mol·L- 1。对于 2 .5× 10 - 5mol·L- 1苯巴比妥 5次测定的相对标准偏差为 2 .7% ,回收率为10 2 .1%。与高效液相色谱和其他方法相比 ,此法具仪器简单、简便快速、无需通氮除氧等特点     

胆红素的伏安特性及其微分脉冲伏安法测定

建立中成药中胆红素定量测定的微分脉冲伏安法。在多种介质中研究胆红素在玻碳电极上的电化学行为 ,全面优化条件后 ,采用标准加入法对中成药中胆红素进行测定 ,并通过与药典中标准方法对照和干扰实验及回收率实验对本方法进行评价。在 0 .2mol·L-1HAc NaAc 5 0 %EtOH和 1 1 5mol·L-1KH2 PO4 Na2 HPO4 溶液中 ,峰电流与胆红素浓度分别在 6.2 5× 1 0 -7～ 1 .0 0× 1 0 -5mol·L-1(r=0 .9976)和 5 .0 0× 1 0 -8～ 3.0 0× 1 0 -6mol·L-1(r=0 .9939)范围内呈良好的线性关系 ,检测下限分别为 5 .0× 1 0 -8mol·L-1和 5 .0× 1 0 -9mol·L-1。众生丸和牛黄解毒片中胆红素的质量分数分别为 0 .0 86%和 0 .1 0 9% ,RSD分别为 3 4%和 3.0 % ,回收率为 96.6%～ 1 0 4 .1 % ,其结果与药典中标准方法测定结果基本一致。     

Cd2+用于复合维生素B片剂中烟酰胺的示波测定

在0.05mol·L-1Na2B4O7-0.05 mol·L-1KNO3溶液中,Cd2+能够产生灵敏切口且该切口深度随烟酰胺-Cd2+络合物量的增加而变浅.根据Cd2+的这一示波特性,建立了用二次微分简易示波伏安法间接测定烟酰胺含量的新方法.在选定实验条件下,测得Cd2+在二次微分简易示波图上的峰高与烟酰胺浓度在3.0×10-6～6.5×10-5mol·L-1范围内呈线性关系,检出限为1.5×10-6mol·L-1;对于3.0×10-5mol·L-1烟酰胺测定的相对标准偏差为2.3%(n=5).与其他方法相比,本方法具有仪器简单、方法简便快速、无需通氮除氧等特点.     

半微分阳极溶出伏安法测定矿泉水中痕量铝

利用铝(Ⅲ)与8 羟基喹啉形成络合物的反应,用半微分阳极溶出伏安法进行水样中痕量铝(Ⅲ)的测定。以0.024moL·L-1乙酸 乙酸胺缓冲液(pH6.0)为底液,玻碳电极为工作电极,测得络合物的氧化峰电位是0.87V(vs.Ag/AgCl,饱和KCl)。峰高与铝(Ⅲ)浓度在1.00×10-5～5.00×10-5mol·L-1、8.00×10-8～4.00×10-6mol·L-1范围内呈良好的线性关系,铝的检出限为1.00×10-8mol·L-1。此法干扰较少,易于掩蔽,重复性好,灵敏度较高,用于矿泉水中微量铝(Ⅲ)的测定,获得满意效果。     

表面活性剂增敏2.5次微分极谱测定香豆素

拟定了表面活性剂增敏、2 .5次微分极谱测定香豆素的方法。在含 6.0× 10 -6 mol·L-13 氯 2 羟丙基 三甲基氯化铵的 0 .1mol·L-1KH2 PO4 Na2 HPO4 (pH 6.8)缓冲液中 ,香豆素还原波 [峰电位Ep=- 1.60V(vs .SCE) ]的 2 .5次微分极谱峰峰电流e″p 与其浓度在 4 .0× 10 -7～ 6.0× 10 -5mol·L-1范围内呈良好线性关系 (r =0 .9998,n =10 ) ,检出限为 1.2× 10 -7mol·L-1。 13次平行测量 8.0× 10 -6 mol·L-1香豆素的峰电流 ,RSD为 1.5 %。该方法可用于中药白芷中香豆素的直接测定     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.