Theoretical characterization of structures and energies of benzene-(H2S)n and (H2S)n (n=1-4) clusters

An ab initio study was performed in clusters up to four H(2)S molecules and benzene using calculations at MP26-31+G(*) and MP2/aug-cc-pVDZ levels. Differences between both sets of calculations show the importance of using large basis sets to describe the intermolecular interactions in this system. The obtained binding energies reflect that benzene has not the same behavior in H(2)S as in water, pointing to a higher solubility of this molecule in H(2)S than in water. The Bz-cluster binding energy was fitted to an asymptotic representation with a maximum value of the energy of -8.00 kcal/mol that converges in a cluster with 12 H(2)S molecules. The obtained intermolecular distance in the Bz-H(2)S dimer is similar to the experimental value; however, the difference is much larger for the angles defining the orientation. The influence of benzene produces a distortion of the (H(2)S)(n) clusters, so the intermolecular distances change with regard to the (H(2)S)(n) isolated clusters. Frequency shifts are larger in clusters with benzene than without it. In the smallest clusters the shift associated to the stretching of the S-H bonded to benzene is the largest one, but for the cluster with three H(2)S molecules this stretching is combined with the other S-H stretching of the molecule so the resulting shift is not the largest one.     

Study of the interaction in clusters formed by phenol and CH3X (X=CN,F,Cl) molecules

The characteristics of the interaction between phenol and acetonitrile, methyl fluoride and methyl chloride were studied. The most stable structures for clusters containing one or two CH3X molecules and one phenol moiety were located by means of ab initio and density functional theory calculations. Phenol-acetonitrile dimer presents two almost equally stable structures; one of them is a typical linearly hydrogen bonded minimum, whereas in the other one, a C-H...pi contact is established accompanied by a distorted O-H...N hydrogen bond. Although the latter minimum presents the larger interaction energy, deformation effects favor the formation of the linear hydrogen bonded one. In complexes with methyl fluoride and methyl chloride, this arrangement is the most stable structure and no linear hydrogen bonded structures were located. Our best estimates for the interaction energies amount to -27.8, -21.6, and -19.7 kJ/mol for clusters of phenol with acetonitrile, methyl fluoride, and methyl chloride, respectively. The main contribution to the stabilization of these clusters is of electrostatic nature, although in structures where a C-H...pi contact is present, the dispersion contribution is also significant. In clusters formed by phenol and two CH3X units, the most stable arrangement corresponds to a head to tail disposal with O-H...X, C-H...X, and C-H...pi contacts forming a cycle. Only for this type of arrangement, three body effects are non-negligible even though they constitute a minor effect. The results also indicate that interactions with methyl fluoride and methyl chloride are of similar intensity, although weaker than with acetonitrile. Significant frequency shifts are predicted for the O-H stretching, which increase when increasing the number of CH3X molecules.     

Magnitude and nature of interactions in benzene-X (X=ethylene and acetylene) in the gas phase: significantly different CH/pi interaction of acetylene as compared with those of ethylene and methane

The accurate interaction energies of the CH/pi interaction in the benzene-X clusters (X = ethylene and acetylene) were experimentally and theoretically determined. Two-color multiphoton ionization spectroscopy was applied, and the binding energies in the neutral ground state of the clusters were evaluated from the dissociation threshold measurements of the cluster cations. The experimental binding energies of the clusters (D0) were 1.4+/-0.2 and 2.7+/-0.2 kcal/mol, respectively. Estimated CCSD(T) interaction energies for the clusters at the basis set limit (De) were 2.2 and 2.8 kcal/mol, respectively. Calculated D0 values (1.7 and 2.4 kcal/mol, respectively) are close to the experimental values. Large electron correlation contributions (Ecorr=-3.6 and -2.8 kcal/mol, respectively) show that dispersion is the major source of the attraction in both clusters. The electrostatic interaction in the ethylene cluster is very small (-0.38 kcal/mol), as in the case of the benzene-methane cluster, whereas the electrostatic interaction in the acetylene cluster is large (-1.70 kcal/mol). The shifts of the S1-S0 transition also suggest that the ethylene cluster is a van der Waals-type cluster, but the acetylene cluster is a pi-hydrogen-bonded cluster. The nature of the CH/pi interaction of the "activated" alkyne C-H bond is significantly different from that of the "nonactivated" (or typical) alkane and alkene C-H bonds.     

Resonant 2-photon ionization study of the conformation and the binding of water molecules to 2-phenylethanethiol (PhCH2CH2SH)

The structures of 2-phenylethanethiol (PET, PhCH(2)CH(2)SH) and its 1:1 water clusters have been studied using resonant two-photon ionization spectroscopy including band contour analysis and UV-UV holeburning, combined with extensive ab initio calculations on ground and excited states. The most populated conformer, labeled Ggpi, has a gauche arrangement about the SCCC and HSCC bonds that permits a stabilizing SH...dpi type of hydrogen bond. The other observed conformer, Ag, is anti with respect to the SCCC bond. In the dominant 1:1 water cluster, a water molecule binds to the Ggpi conformer via an OH...S hydrogen bond and two significant CH...O interactions. There is also evidence for water binding to conformer Ag with a similar arrangement, and for a second Ggpi cluster where water inserts between the SH and the aromatic ring. The additional interactions to the water molecules result in net D(e) binding energies approximately double those resulting from a single thiol-water hydrogen bond. The (1)(pi,pi(*)) excited state lifetimes in the bare molecules are very short because of internal conversion to a dissociative (1)(n,pi(*)) state related to the thiol. In the dominant Gw(1) cluster, the lifetime is significantly increased from <1 to approximately 4 ns. Hydrogen bonding to the thiol, which raises the energy of the dissociative (1)(n,pi(*)) state, accounts for this behavior.     

Computational study of the interaction of indole-like molecules with water and hydrogen sulfide

The characteristics of the interaction between water and hydrogen sulfide with indole and a series of analogs obtained by substituting the NH group of indole by different heteroatoms have been studied by means of ab initio calculations. In all cases, minima were found corresponding to structures where water and hydrogen sulfide interact by means of X-H···π contacts. The interaction energies for all these π complexes are quite similar, spanning from -13.5 to -18.8 kJ/mol, and exhibiting the stability sequence NH > CH(2) ≈ PH > Se ≈ S > O, for both water and hydrogen sulfide. Though interaction energies are similar, hydrogen sulfide complexes are slightly favored over their water counterparts when interacting with the π cloud. σ-Type complexes were also considered for the systems studied, but only in the case of water complexes this kind of complexes is relevant. Only for complexes formed by water and indole, a significantly more stable σ-type complex was found with an interaction energy amounting to -23.6 kJ/mol. Oxygen and phosphorous derivatives also form σ-type complexes of similar stability as that observed for π ones. Despite the similar interaction energies exhibited by complexes with water and hydrogen sulfide, the nature of the interaction is very different. For π complexes with water the main contributions to the interaction energy are electrostatic and dispersive contributing with similar amounts, though slightly more from electrostatics. On the contrary, in hydrogen sulfide complexes dispersion is by far the main stabilizing contribution. For the σ-type complexes, the interaction is clearly dominated by the electrostatic contribution, especially in the indole-water complex.     

Low-temperature adsorption of H2S on Ag(111)

H(2)S forms a rich variety of structures on Ag(111) at low temperature and submonolayer coverage. The molecules decorate step edges, exist as isolated entities on terraces, and aggregate into clusters and islands, under various conditions. One type of island exhibits a (√37×√37)R25.3° unit cell. Typically, molecules in the clusters and islands are separated by about 0.4 nm, the same as the S-S separation in crystalline H(2)S. Density functional theory indicates that hydrogen-bonded clusters contain two types of molecules. One is very similar to an isolated adsorbed H(2)S molecule, with both S-H bonds nearly parallel to the surface. The other has a S-H bond pointed toward the surface. The potential energy surface for adsorption and diffusion is very smooth.     

Transformations of griseofulvin in strong acidic conditions--crystal structures of 2'-demethylgriseofulvin and dimerized griseofulvin

The structure of griseofulvic acid, C16H15ClO6, at 100 K has orthorhombic (P2(1)2(1)2) symmetry. It is of interest with respect to biological activity. The structure displays intermolecular O-H...O, C-H...O hydrogen bonding as well as week C-H...pi and pi...pi interactions. In strong acidic conditions the griseofulvin undergoes dimerization. The structure of dimerized griseofulvin, C34H32C12O12 x C2H6O x H2O, at 100 K has monoclinic (P2(1)) symmetry. The molecule crystallized as a solvate with one ethanol and one water molecule. The dimeric molecules form intermolecular O-H...O hydrogen bonds to solvents molecules only but they interact via week C-H...O, C-H...pi, C-Cl...pi and pi...pi interactions with other dimerized molecules.     

A study of the reactions of molecular hydrogen with small gold clusters

This work presents a study of reactions between neutral and negatively charged Au(n) clusters (n=2,3) and molecular hydrogen. The binding energies of the first and second hydrogen molecule to the gold clusters were determined using density functional theory (DFT), second order perturbation theory (MP2) and coupled cluster (CCSD(T)) methods. It is found that molecular hydrogen easily binds to neutral Au(2) and Au(3) clusters with binding energies of 0.55 eV and 0.71 eV, respectively. The barriers to H(2) dissociation on these clusters with respect to Au(n)H(2) complexes are 1.10 eV and 0.59 eV for n=2 and 3. Although negatively charged Au(n) (-) clusters do not bind molecular hydrogen, H(2) dissociation can occur with energy barriers of 0.93 eV for Au(2) (-) and 1.39 eV for Au(3) (-). The energies of the Au(2)H(2) (-) and Au(3)H(2) (-) complexes with dissociated hydrogen molecules are lower than the energies of Au(2) (-)+H(2) and Au(3) (-)+H(2) by 0.49 eV and 0.96 eV, respectively. There is satisfactory agreement between the DFT and CCSD(T) results for binding energies, but the agreement is not as good for barrier heights.     

Interaction of dihydrogen with small and light molecules

Second-order M?ller-Plesset (MP2) calculations (using the approximate resolution of the identity, RI-MP2), explicitly correlated MP2 (MP2-R12) calculations, and coupled-cluster calculations including all single and double excitations with a perturbative estimate of triple excitations [CCSD(T)] are performed to study the interaction of molecular hydrogen with the small molecules HF, H2O, NH3, and LiOH. Different adsorption positions are studied. In the cases of H2O and NH3, the most favorable configuration places H2 in an end-on fashion on the O or N atom, respectively. In the cases of HF and LiOH, the H2 molecule takes a side-on position on the H atom of HF or the Li atom. With respect to MP2 calculations in a triple-zeta basis, both the enlargement of the basis set and the extension of the correlation treatment (CCSD(T) vs MP2) increase the interaction energy. The basis set limit CCSD(T) estimates of the interaction energy of H2 with the HF, H2O, NH3, and LiOH molecules amount to 4.40, 2.67, 3.02, and 10.74 kJ mol-1, respectively. The interaction energy for the simultaneous interaction of H2 with two LiOH molecules does not significantly exceed the value obtained for the interaction with a single LiOH molecule. Furthermore, the interaction energies (by MP2) of H2 with glycine, the glycine dimer, and imidazolium chloride amount to 2.78, 5.00, and 6.30 kJ mol-1, respectively.     

可快速计算水团簇三体作用强度的新方法

将水分子视为由2个O—H键偶极构成, 再将水分子间的三体作用视为长程诱导作用和短程校正之和, 使用Thole模型计算长程诱导作用, 通过同时考虑不同水分子间的置换和同一个水分子中2个键偶极间的置换计算短程校正, 从而提出了一个可快速计算水团簇三体作用强度的新方法. 根据已报道的12347个水三聚体的结构和CCSD(T)三体作用能, 确定了该方法所需参数. 将该方法和所确定的参数应用于67个水团簇体系, 计算这些体系的三体作用能, 并与CCSD(T), MP2, M06-2X方法的计算结果进行比较. 结果表明, 相对于CCSD(T)方法的总三体作用能, 本文方法的均方根偏差(RMSD)仅为3.32 kJ/mol, 平均相对偏差(MRD)仅为2.43%; 对较大水团簇体系, 该方法计算精度稍优于MP2方法, 明显优于M06-2X方法, 并且更快捷高效.     

CH/pi interactions in methane clusters with polycyclic aromatic hydrocarbons

Geometries and interaction energies for methane clusters with naphthalene and pyrene were studied. Estimated CCSD(T) interaction energies for the clusters at the basis set limit were -1.92 and -2.50 kcal mol(-1), respectively. Dispersion is mainly responsible for the attraction. Electrostatic interaction is very small. Although the benzene-methane cluster prefers a monodentate structure, in which a C-H bond of the methane points toward the benzene, the methane clusters with the polycyclic aromatic hydrocarbons do not prefer monodentate structures. In the benzene-methane cluster, the weak electrostatic interaction stabilizes the monodentate structure. On the other hand the dispersion interaction controls the orientation of methane in the naphthalene and pyrene clusters. The dispersion interactions in these clusters are significantly larger than those in the benzene-methane cluster. The methane prefers the orientation which is suitable for stabilization by dispersion. Hydrogen atoms of the methane locate above the centers of hexagonal rings of the polycyclic aromatic hydrocarbons in the stable structures. The structures have a small steric repulsion and this positions them only a short distance from the aromatic plane. The large dispersion contribution to the attraction shows that interactions between carbon atoms are mainly responsible for the attraction, and that hydrogen atoms are not important for the attraction. This shows that the interactions between the methane and polycyclic aromatic hydrocarbons are not pi-hydrogen bonds.     

From weak interactions to covalent bonds: a continuum in the complexes of 1,8-bis(dimethylamino)naphthalene

Experimental charge density distributions in a series of ionic complexes of 1,8-bis(dimethylamino)naphthalene (DMAN) with four different acids: 1,2,4,5-benzenetetracarboxylic acid (pyromellitic acid), 4,5-dichlorophthalic acid, dicyanoimidazole, and o-benzoic sulfimide dihydrate (saccharin) have been analyzed. Variation of charge density properties and derived local energy densities are investigated, over all inter- and intramolecular interactions present in altogether five complexes of DMAN. All the interactions studied [[O...H...O](-), C[bond]H...O, [N[bond]H...N](+), O[bond]H...O, C[bond]H...N, C pi...N pi, C pi...C pi, C[bond]H...Cl, N[bond]H(+)] follow exponential dependences of the electron density, local kinetic and potential energies at the bond critical points on the length of the interaction line. The local potential energy density at the bond critical points has a near-linear relationship to the electron density. There is also a Morse-like dependence of the laplacian of rho on the length of interaction line, which allows a differentiation of ionic and covalent bond characters. The strength of the interactions studied varies systematically with the relative penetration of the critical points into the van der Waals spheres of the donor and acceptor atoms, as well as on the interpenetration of the van der Waals spheres themselves. The strong, charge supported hydrogen bond in the DMANH(+) cation in each complex has a multicenter character involving a [[Me(2)N[bond]H....NMe(2)](+)....X(delta-)] assembly, where X is the nearest electronegative atom in the crystal lattice.     

Characteristics of antiaromatic ring pi multi-hydrogen bonds in (H2O)n-C4H4 (n = 1, 2) complexes

By counterpoise-corrected optimization method, the six antiaromatic ring pi multi-hydrogen bond structures with diversiform shapes for (H2O)n-C4H4 (n = 1,2) have been obtained at the MP2/aug-cc-pVDZ level. At the CCSD(T)/aug-cc-pVDZ level, the interaction energy obtained mainly depends on the numbers of H2O and fold numbers of the pi multi-hydrogen bond. The interaction energy order is -2.342 (1a with pi mono-hydrogen) < -2.777 (1b with pi bi-hydrogen) < -4.683 (2a with pi bi-hydrogen) < -4.734 (2b with pi tri-hydrogen) < -4.782 (2c with pi tri-hydrogen) < -5.009 kcal/mol (2d with pi tetra-hydrogen bond). Strangely, why is the interaction energy of the pi bi-hydrogen bond in 1b close to that of the pi mono-hydrogen bond in 1a (their difference is only 15.7%)? The reason is that a pi-type H-bond (as an accompanying interaction) between two lone pairs of the O-atom and a near pair of H-atoms of C4H4 exists shoulder by shoulder in structures 1a, 2a, 2b, and 2c and contributes to the interaction energy. Another accompanying interaction, a repulsive interaction between the pi H-bond (using the H-atom(s) of H2O) and the near pair of H-atoms of C4H4, is also found. For the structures and interaction energies, the pi-type H-bond produces four effects: bending the strong pi H-bond, attracting the pair of H-atoms of C4H4 so that they deviate from the C4 ring plane, showing the interaction energy contribution, and bringing the larger electron correlation contribution. The repulsive interaction also produces four effects: pushing the pair of H-atoms of C4H4 so that they deviate from its ring plane, elongating the distance of the pi H-bond, promoting the formation of pi-type H-bond, and slightly influencing the interaction energy. In the present paper, one C=C bond with two H2O (over and below the ring plane) forms a pi H-bond link in two ways: a strong-weak pi H-bond link and a strong-strong pi H-bond link. The stability contribution of the former is more favorable than the latter. One H2O forms a pi H-bond with C4H4 in two ways. One strong pi H-bond part (over or below the ring plane) always is accompanied by another H-bond part. The accompanying part is either a weak pi H-bond or pi-type H-bond.     

Influence of bond fixation in benzo-annulated N-salicylideneanilines and their ortho-C(=O)X derivatives (X = CH3, NH2, OCH3) on tautomeric equilibria in solution

1H, 13C, and 15N NMR spectra show that an ortho-C(=O)X group present in the molecules of N-salicylideneanthranilamide (X = NH2), methyl N-salicylideneanthranilate (X = OCH3), N-salicylidene-o-aminoacetophenone (X = CH3), and their benzo analogues have only a minor effect on the tautomeric OH/NH-equilibrium in solution. Only two of three possible tautomers were detected. Lability of the absent form was proved by theoretical calculations. Calculated energies show that the enolimino form (OH) is less stable than the enaminone (NH) form only for dibenzo-annulated N-salicylideneanilines. The population of each species in the tautomeric mixture was found to be inversely proportional to its energy. Application of the geometry-based aromaticity index HOMA shows that the effectiveness of the pi-electron delocalization in different rings in the molecule depends mostly on the position of benzo-annulation. Both the NH...O and N...HO hydrogen bonds present in the NH and OH tautomers, respectively, increase the aromaticity of the quasirings H-O-C=C-C=N and O=C-C=C-N-H and decrease the aromatic character of the fused benzene ring. These results seem to be reliable when N-salicylideneanilines studied are compared with naphthalene and their benzo-annulated derivatives, i.e., phenanthrene, anthracene, and triphenylene. An analysis of the effectiveness of pi-electron delocalization confirms that in all cases studied, the OH form is more stable. Although the HOMA values and calculated energies are not a criterion that allows determination of the dominating tautomer, both of these parameters correctly show the effect of changes in the molecular topology on tautomeric preferences.     

Sulfur, tin and gold derivatives of 1-(2'-pyridyl)-ortho-carborane, 1-R-2-X-1,2-C2B10H10 (R = 2'-pyridyl, X = SH, SnMe3 or AuPPh3)

Reaction of the lithium salt of 1-(2'-pyridyl)-ortho-carborane, Li[1-R-1,2-C(2)B(10)H(10)](R = 2'-NC(5)H(4)), with sulfur, followed by hydrolysis, gave the mercapto-o-carborane, 1-R-2-SH-1,2-C(2)B(10)H(10) which forms chiral crystals containing helical chains of molecules linked by intermolecular S-H...N hydrogen bonds. The cage C(1)-C(2) and exo C(2)-S bond lengths (1.730(3) and 1.775(2)[Angstrom], respectively) are indicative of exo S=C pi bonding. The tin derivative 1-R-2-SnMe(3)-1,2-C(2)B(10)H(10), prepared from Li[1-R-1,2-C(2)B(10)H(10)] and Me(3)SnCl, crystallises with no significant intermolecular interactions. The pyridyl group lies in the C(1)-C(2)-Sn plane, oriented to minimise the NSn distance (2.861(3)[Angstrom]). The tin environment is distorted trigonal bipyramidal with axial N and Me. The gold derivative 1-R-2-AuPPh(3)-1,2-C(2)B(10)H(10), prepared from Li[1-R-1,2-C(2)B(10)H(10)] and AuCl(PPh(3)), reveals no NAu interaction in its crystal structure.     

Development of a 3-body:many-body integrated fragmentation method for weakly bound clusters and application to water clusters (H2O)(n = 3-10, 16, 17)

A 3-body:many-body integrated quantum mechanical (QM) fragmentation method for non-covalent clusters is introduced within the ONIOM formalism. The technique captures all 1-, 2-, and 3-body interactions with a high-level electronic structure method, while a less demanding low-level method is employed to recover 4-body and higher-order interactions. When systematically applied to 40 low-lying (H(2)O)(n) isomers ranging in size from n = 3 to 10, the CCSD(T):MP2 3-body:many-body fragmentation scheme deviates from the full CCSD(T) interaction energy by no more than 0.07 kcal mol(-1) (or <0.01 kcal mol(-1) per water). The errors for this QM:QM method increase only slightly for various low-lying isomers of (H(2)O)(16) and (H(2)O)(17) (always within 0.13 kcal mol(-1) of the recently reported canonical CCSD(T)/aug-cc-pVTZ energies). The 3-body:many-body CCSD(T):MP2 procedure is also very efficient because the CCSD(T) computations only need to be performed on subsets of the cluster containing 1, 2, or 3 monomers, which in the current context means the largest CCSD(T) calculations are for 3 water molecules, regardless of the cluster size.     

Experimental and theoretical determination of the accurate CH/π interaction energies in benzene-alkane clusters: correlation between interaction energy and polarizability

The CH/π interaction energies in benzene-alkane model clusters were precisely determined by laser spectroscopy and theoretical calculations. Two-color resonant two-photon ionization spectroscopy was employed to experimentally determine the interaction energies with isomer selectivity. High precision ab initio calculations were also performed to evaluate the CCSD(T) level interaction energies of various isomers at the basis set limit. Binary clusters of benzene with ethane, propane, n-butane, iso-butane, and cyclohexane were studied. The experimental interaction energies were well reproduced by the theoretical evaluations. The magnitude of the interaction energy clearly correlates with the average polarizability of the alkane moiety, demonstrating that the CH/π interaction energy is dominated by the dispersion interaction. On the other hand, the number of C-H groups in contact with the phenyl ring has no relation to the magnitude of the interaction energy, and it indicates that the role of the hydrogen atom in the CH/π interaction is essentially different from that in hydrogen bonds.     

High-level ab initio predictions for the ionization energies and heats of formation of five-membered-ring molecules: thiophene, furan, pyrrole, 1,3-cyclopentadiene, and borole, C4H4X/C4H4X+ (X = S, O, NH, CH2, and BH)

The ionization energies (IEs) and heats of formation (ΔH°(f0)/ΔH°(f298)) for thiophene (C(4)H(4)S), furan (C(4)H(4)O), pyrrole (C(4)H(4)NH), 1,3-cyclopentadiene (C(4)H(4)CH(2)), and borole (C(4)H(4)BH) have been calculated by the wave function-based ab initio CCSD(T)/CBS approach, which involves the approximation to the complete basis set (CBS) limit at the coupled-cluster level with single and double excitations plus a quasi-perturbative triple excitation [CCSD(T)]. Where appropriate, the zero-point vibrational energy correction (ZPVE), the core-valence electronic correction (CV), and the scalar relativistic effect (SR) are included in these calculations. The respective CCSD(T)/CBS predictions for C(4)H(4)S, C(4)H(4)O, C(4)H(4)NH, and C(4)H(4)CH(2), being 8.888, 8.897, 8.222, and 8.582 eV, are in excellent agreement with the experimental values obtained from previous photoelectron and photoion measurements. The ΔH°(f0)/ΔH°(f298) values for the aforementioned molecules and their corresponding cations have also been predicted by the CCSD(T)/CBS method, and the results are compared with the available experimental data. The comparisons between the CCSD(T)/CBS predictions and the experimental values for C(4)H(4)S, C(4)H(4)O, C(4)H(4)NH, and C(4)H(4)CH(2) suggest that the CCSD(T)/CBS procedure is capable of predicting reliable IE values for five-membered-ring molecules with an uncertainty of ±13 meV. In view of the excellent agreements between the CCSD(T)/CBS predictions and the experimental values for C(4)H(4)S, C(4)H(4)O, C(4)H(4)NH, and C(4)H(4)CH(2), the similar CCSD(T)/CBS IE and ΔH°(f0)/ΔH°(f298) predictions for C(4)H(4)BH, whose thermochemical data are not readily available due to its reactive nature, should constitute a reliable data set. The CCSD(T)/CBS IE(C(4)H(4)BH) value is 8.868 eV, and ΔH°(f0)/ΔH°(f298) values for C(4)H(4)BH and C(4)H(4)BH(+) are 269.5/258.6 and 1125.1/1114.6 kJ/mol, respectively. The highest occupied molecular orbitals (HOMO) of C(4)H(4)S, C(4)H(4)O, C(4)H(4)NH, C(4)H(4)CH(2), and C(4)H(4)BH have also been studied by the natural bond orbital (NBO) method, and the extent of π-electron delocalization in these five-membered rings are discussed in correlation with their molecular structures and orbitals.     

The molecular and crystal structure of tert-butyl Nalpha-tert-butoxycarbonyl-L-(S-trityl)cysteinate and the conformation-stabilizing function of weak intermolecular bonding

The title compound, C31H37NO4S [systematic name: (R)-tert-butyl-2-[(tert-butoxycarbonyl)amino]-3-(tritylsulfanyl)propanoate] is an L-cysteine derivative with three functions: NH2, COOH and SH, blocked by protecting groups tert-butoxycarbonyl, tert-butyl and trityl, respectively. The main chain of the molecule adopts the extended, nearly all-trans C5 conformation with the intramolecular N-H...O=C hydrogen bond. The urethane group is not involved in any intermolecular hydrogen bonding. Only weak intermolecular hydrogen bonds and hydrophobic contacts are observed in the crystal structure. These are C-H...O hydrogen bonds and CH/pi interactions with donor...acceptor distances, C...O ca. 3.5 A and C...C ca. 3.7 A, respectively. The first type of interaction links phenyl H-atoms and carbonyl groups. The second type of interaction is formed between a methyl group of the tert-butyl fragment and a trityl phenyl ring. The resulting molecular conformation in the crystal is very close to an ab initio minimum energy conformer of the isolated molecule. The extended C5 conformation of the main peptide chain is the same and there is slight discrepancy in the disposition of trityl phenyl rings. Their small dislocation creates the possibility of forming the entire network above of extensive, specific, weak intermolecular interactions; these constrain the molecule and permit it to retain the minimum energy C5 conformation of its main chain in the solid state. In contrast, in n-hexane solution, where such specific interactions cannot occur, only a small population of the molecules adopts the extended C5 conformation.     

High-level ab initio computations of structures and interaction energies of naphthalene dimers: origin of attraction and its directionality

The intermolecular interaction energies of naphthalene dimers have been calculated by using an aromatic intermolecular interaction model (a model chemistry for the evaluation of intermolecular interactions between aromatic molecules). The CCSD(T) (coupled cluster calculations with single and double substitutions with noniterative triple excitations) interaction energy at the basis set limit has been estimated from the second-order M?ller-Plesset perturbation interaction energy near saturation and the CCSD(T) correction term obtained using a medium-size basis set. The estimated interaction energies of the set of geometries explored in this work show that two structures emerge as being the lowest energy, and may effectively be considered as isoenergetic on the basis of the errors inherent in out extrapolation procedure. These structures are the slipped-parallel (Ci) structure (-5.73 kcal/mol) and the cross (D2d) structure (-5.28 kcal/mol). The T-shaped (C2v) and sandwich (D2h) dimers are substantially less stable (-4.34 and -3.78 kcal/mol, respectively). The dispersion interaction is found to be the major source of attraction in the naphthalene dimer. The electrostatic interaction is substantially smaller than the dispersion interaction. The large dispersion interaction is the cause of the large binding energies of the cross and slipped-parallel dimers.