Stabilization of enzymes-antioxidants by complex and conjugate formation with block copolymers: Prospects for CNS treatment

Nanosized particles with a radius of 16 ± 2 nm based on complexes and conjugates of highly active superoxide dismutase and catalase with polyelectrolyte block copolymer poly(ethyleneimine)-poly(ethylene glycol) and similar bienzyme systems were obtained. Mass spectrometry was used to confirm the crosslinking of enzyme and block copolymer molecules in the nanoparticles that were formed. A significant increase of SOD and catalase stability (up to four times) towards proteolytic degradation under chymotrypsin and trypsin action for 3 h at 37°C was revealed when enzyme-containing nanoparticles were used for experiments. Antioxidant enzymes-containing polyelectrolyte nanoparticles seem to be promising for BBB penetration and CNS drug delivery.     

Poly(2-(dimethylamino)ethyl methacrylate)-b-poly(hydroxypropyl methacrylate) copolymers/bovine serum albumin complexes in aqueous solutions

Complexation ability of poly(2-(dimethylamino)ethyl methacrylate)-b-poly(hydroxy propyl methacrylate) (PDMAEMA-b-PHPMA) amphiphilic doubly thermo-responsive block copolymers, and their quaternized counterparts QPDMAEMA-b-PHPMA, toward bovine serum albumin (BSA) is studied in aqueous solutions. The PDMAEMA-b-PHPMA amphiphilic block copolymers self-assemble in nanostructured aggregates with PDMAEMA coronas having different inner structure and micro-polarity depending on the solubilization protocol utilized when inserted in aqueous media. By incorporating different BSA concentrations, we investigate the copolymer–protein interactions by light scattering measurements in aqueous solutions in a broad temperature range, utilizing different solubilization protocols for the copolymers. Fluorescence spectroscopy and ζ-potential measurements were also utilized to investigate the structure and properties of the copolymer/protein complexes formed in each case. Such knowledge may lead to a better understanding of the inner structure and micro polarity of the nanostructured aggregates formed by the novel (Q)PDMAEMA-b-PHPMA copolymers, along with their potential abilities in nanocarrier formation, protein complexation, stabilization, and delivery.     

Nanoreactors based on self-assembled amphiphilic diblock copolymers for the preparation of ZnO nanoparticles

A self-assembled diblock copolymer containing styrene (S), methyl methacrylate and a certain percentage of hydrophilic segment of poly(methacrylic acid) (i.e., poly(styrene)-block-poly(methyl methacrylate/methacrylic acid) was synthesized via the ATRP method in two steps. This was followed by a partial hydrolysis of the methyl ester linkages of the methyl methacrylate block under acidic conditions. The resultant block copolymer had a narrow molecular weight dispersity (Р< 1.3) and was characterized using FT-IR and Raman spectroscopy as well as size exclusion chromatography. The block copolymer was used as a nanoreactor for inorganic nanoparticles (ZnO). The incorporation of a single source precursor, such as ZnCl₂, into the self-assembled copolymer matrix and the conversion into ZnO nanostructures was carried out in the liquid phase using wet chemical processing techniques. We report the synthesis and characterization of nanocomposites with dual characteristics due to the functionalities incorporated into the matrix. The optical properties were determined by UV–Vis and fluorescence, the crystallinity was studied using X-ray diffraction, and the thermal stability and studies of the cyclic voltammetry were obtained by thermogravimetric analyzes and potentiodynamic electrochemical measurements, respectively. The structural, topographical and morphological characterizations of the ZnO composite in relation to the precursor block copolymer were analyzed via scanning electron microscopy, transmission electron microscopy and atomic force microscopy.     

Synthesis of Amphiphilic ABCBA-Type Pentablock Copolymer from Consecutive ATRPs and Self-Assembly in Aqueous Solution

Summary: A novel amphiphilic ABCBA-type pentablock copolymer with properties that are sensitive to temperature and pH, poly(2-dimethylaminoethyl methacrylate)-block-poly(2,2,2-trifluoroethyl methacrylate)-block-poly(ε-caprolactone)-block-poly(2,2,2- trifluoroethyl methacrylate)-block-poly(2-dimethylaminoethyl methacrylate) (PDMAEMA- b-PTFEMA-b-PCL-b-PTFEMA-b-PDMAEMA), was synthesized via consecutive atom transfer radical polymerizations (ATRPs). The copolymers obtained were characterized by gel permeation chromatography (GPC) and ¹H nuclear magnetic resonance (NMR) spectroscopy, respectively. The aggregation behaviors of the pentablock copolymers in aqueous solution with different pH (pH = 4.0, 7.0 and 8.5) were studied. Transmission electron microscopic images revealed that spherical micelles from self-assembly of the pentablock copolymer were prevalent in all cases. The mean diameters of these micelles increased from 34, 46, to 119 nm when the pH of the aqueous solution decreased from 8.5, 7.0, to 4.0, respectively.     

聚肽接枝共聚物的自组装行为研究

Polymeric micelles of poly(γ-benzyl L-glutamate)(PBLG)-poly(ethylene oxide)(PEO) graft copolymer were prepared by the dialysis method in deionized water. Fluorescence spectroscopy, nuclear magnetic resonance(NMR) and transmission electron microscope(TEM) were used for the investigation of the self-assembly of PBLG-PEO graft copolymer. Fluorescence spectrosco0y measurements suggest that PBLG-PEO graft copolymer associates to form polymeric micelles in water. ^1H NMR measurements further prove that in aqueous medium PBLG-PEO graft copolymer could assemble into polymeric micelles with PBLG segments as the hydrophobic inner core and PEO segments as the hydrophilic shell. The results of the TEM observations show that the polymeric micelles of PBLG-PEO graft copolymer are almost spindly shaped, which are different from the morphology of the spherical micelles formed by PBLG-PEO block copolymer. Polymeric micelles formed by polypeptide copolymer have potential application as drug carrier in controlled-release delivery system.     

Synthesis and properties of electroactive polyaniline-graft-poly(2-hydroxy ethyl metacrylate) copolymers

In this paper we report on the synthesis of a polyaniline-graft-poly(2-hydroxy ethyl metacrylate), which was obtained by atom-transfer radical polymerization of 2-hydroxy ethyl metacrylate using polyaniline as a macroinitiator. The latter was prepared by chemical oxidation (interfacial method) and further modification. Macroinitiator and graft copolymer were characterized by FTIR and ¹H NMR spectroscopy. The scanning electron microscopy and atomic force microscopy images showed the growing of poly(2-hydroxy ethyl metacrylate) chains on polyaniline backbone. The solubility test revealed that the polyaniline-graft-poly(2-hydroxyethyl metacrylate) copolymer is water soluble and some organic solvents soluble. The cyclic voltammetry study confirmed the electroactivity of the copolymer.     

Enzymatic cascade reactions inside polymeric nanocontainers: a means to combat oxidative stress

Oxidative stress, which is primarily due to an imbalance in reactive oxygen species, such as superoxide radicals, peroxynitrite, or hydrogen peroxide, represents a significant initiator in pathological conditions that range from arthritis to cancer. Herein we introduce the concept of enzymatic cascade reactions inside polymeric nanocontainers as an effective means to detect and combat superoxide radicals. By simultaneously encapsulating a set of enzymes that act in tandem inside the cavities of polymeric nanovesicles and by reconstituting channel proteins in their membranes, an efficient catalytic system was formed, as demonstrated by fluorescence correlation spectroscopy and fluorescence cross-correlation spectroscopy. Superoxide dismutase and lactoperoxidase were selected as a model to highlight the combination of enzymes. These were shown to participate in sequential reactions in situ in the nanovesicle cavity, transforming superoxide radicals to molecular oxygen and water and, therefore, mimicking their natural behavior. A channel protein, outer membrane protein F, facilitated the diffusion of lactoperoxidase substrate/products and dramatically increased the penetration of superoxide radicals through the polymer membrane, as established by activity assays. The system remained active after uptake by THP-1 cells, thus behaving as an artificial organelle and exemplifying an effective approach to enzyme therapy.     

Hybrid nanocapsules: interactions of ABA block copolymers with liposomes

Amphiphilic ABA triblock copolymers, such as poly(2-methyloxazoline)-block-poly(dimethylsiloxan)-block-poly(2-methyloxazoline) (PMOXA-PDMS-PMOXA), form vesicular structures. Here, the interaction of these ABA molecules with lipids is investigated by electron microscopy, fluorescence spectroscopy, light scattering, and differential scanning calorimetry. Our observations suggest the formation of homogeneous mixed polymer-lipid composites, independent of preparation method, i.e. film hydration, dispersion, or detergent removal. When ABA polymersomes and liposomes are mixed, we observed monomer exchanges on a time scale of minutes. The possibility of forming mixed structures and the exchanges between preformed structures allow the combination of the properties of lipids and polymers such as stability and loading encapsulation capacity.     

A polar macroporous sorbent for gas chromatography

Summary The gas chromatographic behaviour of crosslinked macroporous 2-hydroxyethyl methacrylate grafted with 2-methyloxazoline was investigated and the range of applicability of the copolymer was assessed. Retention index values were measured on this copolymer and compared with those obtained on the terpolymer 2-hydroxyethyl methacrylate-ethylene dimethacrylate-acrylonitrile. Rohrschneider constants and efficiency data for selected sorbates are given. The use of this type of polymer in the separation of various types of compounds is documented by various examples.     

Preparation of stable gold nanoparticles by using diblock copolymer mixture as encapsulating agent

Gold nanoparticles by using the mixture of polystyrene-block-poly(2-vinyl pyridine)/poly(2-vinyl pyridine)-block-poly(ethylene oxide) (PS-b-P2VP/P2VP-b-PEO) block copolymers as encapsulating agent was prepared. The prepared nanoparticles were characterized by transmission electron microscopy, UV-Vis spectroscopy and contact angle. It is demonstrated that the obtained gold nanoparticles are covered with mixed block copolymer shells. The hydrophilic property of the nanoparticles can be varied by the change of the dispersion medium. The obtained gold nanoparticles with mixed block copolymer shells are stable in organic solvents (such as tetrahydrofuran and toluene) and water.     

Superoxide dismutase activity in some strains of lactobacilli: induction by manganese

Dialyzed cell-free extract of lactobacilli was found to contain superoxide dismutase activity by using a test system in which superoxide ion is generated by xanthine oxidase. The specific activities of Lactobacillus acidophilus ATCC 4356, Lactobacillus murinus ATCC 35020, Lactobacillus acidophilus CRL 358, Lactobacillus plantarum ATCC 8014, Lactobacillus casei CRL 431, Lactobacillus plantarum CRL 353, Lactobacillus fermentum ATCC 9338, Lactobacillus buchneri NCDO 110, and Lactobacillus fermentum CRL 251 were between 0.06 and 0.43 U/mg protein. The presence of superoxide dismutase activity was demonstrated when the strains were grown in media containing Mn2+ ions. Superoxide dismutase of lactobacilli may be an Mn enzyme since it was not inhibited by either cyanide or azide ions. However, the cell-free extract of Lactobacillus murinus ATCC 35020 contains superoxide dismutase activity sensitive to both ions.     

Synthesis and properties of a copolymer of poly(l,4-phenylene sulfide)-poly(2,4-phenylene sulfide acid) and its nano-apatite reinforced composite

A new kind of copolymer of poly(1,4-phenylene sulfide)-poly(2,4-phenylene sulfide acid) (PPS-PPSA) and its nano-apatite (NA) composite have been obtained by polycondensation in l-methly-2-pyrrolidone (NMP). The NA content in the composite can reach 60 wt.%. The structures and properties of copolymer and its NA composite were studied though infrared spectroscopy. X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force microscopy. The copolymer has high molecular weight and excellent thermal properties. There is a stable interface formed between NA and PPS-PPSA copolymer in the composite. NA keeps the original morphological structure and crystal behavior in the composite. The composites have good homogeneity and outstanding thermal stability. NA particles are uniformly distributed in the composite. The diameter of apatite in the composite is about 40-60 nm. The PPSA in the copolymer can increase the affinity to apatite and does not decrease the melting point and thermal stability of copolymer.     

Structure and dynamics of alpha-lactalbumin adsorbed at a charged brush interface

We have studied the adsorption of alpha-lactalbumin at a planar poly(acrylic acid) (PAA) brush using neutron reflectometry (NR) and total internal reflection fluorescence (TIRF) spectroscopy. The PAA brush has been prepared by spin-coating silicon or quartz plates with a hydrophobic poly(styrene) film and by transferring the copolymer poly(styrene)-poly(acrylic acid) onto the modified surface. In the case of NR, the poly(styrene) film and the poly(styrene) chain ends of the copolymer were perdeuterated in order to generate a high contrast to the non-deuterated PAA brush. alpha-Lactalbumin was chosen as the model protein because it is a relatively small globular protein with a negative net charge at neutral pH-values, as chosen in the experiments. Thus, it is interacting with the PAA brush on the 'wrong' side of its isoelectric point. In addition, the effects of temperature on the volume fraction profile and the reorientational mobility of the protein within the PAA brush were determined. From the analysis of the NR data, it has been found that despite of its negative net charge, alpha-lactalbumin is penetrating into the PAA brush. Its volume fraction profile parallels that of the PAA brush, indicating an exclusive interaction between the protein and the PAA. No protein accumulation is found at the inner poly(styrene) or the outer solution interface of the PAA brush. When increasing the temperature from 20 to 40 degrees C, less protein is adsorbed, suggesting the presence of enthalpic interaction contributions. From the analysis of the TIRF data, a high degree of reorientational mobility of alpha-lactalbumin within a PAA brush can be inferred. The reorientational correlation time of alpha-lactalbumin labeled with the Alexa Fluor 488 dye was found to increase from 5.5 to 32 ns upon adsorption, which can well be explained by the higher viscosity inside the PAA brush. Overall, the results of this study quantify for the first time the molecular details of the unique interaction of a protein on the 'wrong' side of its isoelectric point with a planar charged brush interface. It is concluded that the high mobility of alpha-lactalbumin within a PAA brush can partially be understood by the presence of repulsive electrostatic interactions. There is no 'freezing' of the protein dynamics, which is a precondition for biological activity.     

Probing paeonol-pluronic polymer interactions by 1H NMR spectroscopy

By using a combination of 1H NMR spectroscopy, two-dimensional heteronuclear single-quantum coherence-resolved (1)H{(13)C} and homonuclear rotating-frame Overhauser enhancement NMR correlation experiments with diffusion ordered spectroscopy (DOSY), the location and distribution of a hydrophobic drug, paeonol, have been established with respect to the methyl groups of the poly(ethylene oxide)-poly(propylene oxide) -poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer. The interaction between them is adjustable according to the different temperature-dependent hydrophilicities or hydrophobicities of the triblock copolymer components. On the other hand, such interactions influence the self-assembly properties of the block copolymer amphiphiles in solution. The amount of anhydrous methyl groups of PPO segments shows an increase with increasing paeonol concentration. It was also demonstrated that the shell-crosslinking of the Pluronic polymer has an effect in increasing the amount of anhydrous methyl groups and thus increasing the hydrophobicity of Pluronic micelles. This might be the deeper reason underlying the increase in drug-loading capacity and prolongation in release time of Pluronic micelles for drug delivery after the shell-crosslinking. Changes in self-diffusion coefficients of paeonol with varying copolymer concentrations and types were also determined by the diffusion-based NMR DOSY technique, and values of K(a), DeltaG, and n were calculated.     

Synthesis of poly(L-lactide)-block-polyisobutylene-block-poly(L-lactide), a new biodegradable thermoplastic elastomer

The anionic ring-opening polymerization of L-lactide was initiated by dipotassium-poly-isobutylene-alcoholate telechelic polymer to yield poly(L -lactide)-block-polyisobutylene-block-poly(L -lactide) triblock copolymer, a partially biodegradable thermoplastic elastomer. The pure triblock copolymer was obtained by gradient column chromatography on silica gel. The molar mass and molar mass distribution of the block copolymer was ascertained by SEC and quantitative ¹H NMR spectroscopy. It showed two glass transitions and microphase separation.     

Polymeric complex micelle loaded with axially substituted silicon(Ⅳ) phthalocyanine

A novel axially substituted silicon(Ⅳ)phthalocyanine,namely di-pyridyloxy axially substituted silicon(Ⅳ)phthalocyanine 2 was synthesized and characterized by UV/vis,IR,elemental analysis,MS as well as ~1H NMR spectroscopy.Hydrophobic 2 was encapsulated by amphiphilic triblock copolymer poly[N~ε-(benzyloxycarbonyl-lysine]-poly(ethylene glycol)-poly[N~ε-(benzyl oxycarbonyl) (PLL(Z)-b-PEG-b-PLL(Z))to form hydrophobic 2-loaded polymeric complex micelle(PIC)(2-loaded PIC).Atom force microscopy(AFM)image showe...     

Poly(ethylene oxide)-poly(styrene oxide)-poly(ethylene oxide) copolymers: Micellization, drug solubilization, and gelling features

Two new poly(ethylene oxide)-poly(styrene oxide) triblock copolymers (PEO-PSO-PEO) with optimized block lengths selected on the basis of previous studies were synthesized with the aim of achieving a maximal solubilization ability and a suitable sustained release, while keeping very low material expense and excellent aqueous copolymer solubility. The self-assembling and gelling properties of these copolymers were characterized by means of light scattering, fluorescence spectroscopy, transmission electron microscopy, and rheometry. Both copolymers formed spherical micelles (12-14 nm) at very low concentrations. At larger concentration (>25 wt%), copolymer solutions showed a rich phase behavior, with the appearance of two types of rheologically active (more viscous) fluids and of physical gels depending on solution temperature and concentration. The copolymer behaved notably different despite their relatively similar block lengths. The ability of the polymeric micellar solutions to solubilize the antifungal drug griseofulvin was evaluated and compared to that reported for other structurally-related block copolymers. Drug solubilization values up to 55 mg g⁻¹ were achieved, which are greater than those obtained by previously analyzed poly(ethylene oxide)-poly(styrene oxide), poly(ethylene oxide)-poly(butylene oxide), and poly(ethylene oxide)-poly(propylene oxide) block copolymers. The results indicate that the selected SO/EO ratio and copolymer block lengths were optimal for simultaneously achieving low critical micelle concentrations (cmc) values and large drug encapsulation ability. The amount of drug released from the polymeric micelles was larger at pH 7.4 than at acidic conditions, although still sustained over 1 day.     

Photodynamic Crosslinking of Proteins. III. Kinetics of the FMN- and Rose Bengal-sensitized Photooxidation and Intermolecular Crosslinking of Model Tyrosine-containing N-(2-Hydroxypropyl)methacrylamide Copolymers

As part of a study on the role of Tyr residues in the photosensitized intermolecular crosslinking of proteins, we have surveyed the kinetics of the rose bengal- and flavin mononucleotide (FMN)-sensitized photooxidation and crosslinking of a water-soluble N-(2-hydroxypropyl)methacrylamide copolymer with attached 6-carbon side chains terminating in tyrosinamide groups (thus the -OH group of the Tyr is free, but both the amino and carboxyl groups are blocked, simulating the situation of a nonterminal Tyr in a protein). The intermolecular photodynamic crosslinking of the Tyr copolymer can result only from the formation of Tyr-Tyr (dityrosine) bonds, because the copolymer itself is not photooxidizable. Rose bengal, primarily a Type II (singlet oxygen) sensitizer, sensitized the rapid photooxidation of the Tyr residue in the Tyr copolymer only at high pH, where the Tyr phenolic group is ionized; crosslinking did not occur with rose bengal under any of the reaction conditions used. In contrast, FMN, which can sensitize by both Type I (free radical) and Type II processes, sensitized the photooxidation of the Tyr copolymer over the pH range 4-9.5. Also, significant photocrosslinking occurred, but only from pH 4 to 8, with a maximum rate at pH 6. Crosslinking required the presence of oxygen. Studies with inhibitors, D2O as solvent, catalase and superoxide dismutase indicated that the photooxidation and photocrosslinking of the Tyr copolymer with FMN at pH 6 were not mediated by singlet oxygen, superoxide or hydrogen peroxide. It appears that crosslinking involves the abstraction of an H atom from the Tyr phenolic group to give Tyr and FMN radicals. The Tyr radical in one Tyr copolymer can then react with a Tyr radical in another Tyr copolymer to give an intermolecular dityrosine crosslink.     

Functionalized nanoporous thin films from metallo-supramolecular diblock copolymers

A polystyrene-[Ni(2+)]-poly(ethylene oxide) metallo-supramolecular block copolymer (PS-[Ni(2+)]-PEO), where -[ is a terpyridine, is used to create nanoporous thin films with free terpyridine ligands homogenously distributed on the pore walls. The PS-[Ni(2+)]-PEO block copolymer is synthesized by a two step assembly process, and is then self-assembled into a thin film in order to obtain PEO cylinders oriented perpendicularly to the film surface. The supramolecular junction is opened by exposing the film to an excess of a competing ligand, and the free PEO block is then rinsed away by a selective solvent. The presence of the terpyridines on the pore walls is evidenced by fluorescence spectroscopy after formation of a fluorescent complex with an europium salt.     

Differences in Human Plasma Protein Interactions between Various Polymersomes and Stealth Liposomes as Observed by Fluorescence Correlation Spectroscopy

A significant factor hindering the clinical translation of polymersomes as vesicular nanocarriers is the limited availability of comparative studies detailing their interaction with blood plasma proteins compared to liposomes. Here, polymersomes are self-assembled via film rehydration, solvent exchange, and polymerization-induced self-assembly using five different block copolymers. The hydrophilic blocks are composed of anti-fouling polymers, poly(ethylene glycol) (PEG) or poly(2-methyl-2-oxazoline) (PMOXA), and all the data is benchmarked to PEGylated “stealth” liposomes. High colloidal stability in human plasma (HP) is confirmed for all but two tested nanovesicles. In situ fluorescence correlation spectroscopy measurements are then performed after incubating unlabeled nanovesicles with fluorescently labeled HP or the specific labeled plasma proteins, human serum albumin, and clusterin (apolipoprotein J). The binding of HP to PMOXA-polymersomes could explain their relatively short circulation times found previously. In contrast, PEGylated liposomes also interact with HP but accumulate high levels of clusterin, providing them with their known prolonged circulation time. The absence of significant protein binding for most PEG-polymersomes indicates mechanistic differences in protein interactions and associated downstream effects, such as cell uptake and circulation time, compared to PEGylated liposomes. These are key observations for bringing polymersomes closer to clinical translation and highlighting the importance of such comparative studies.