Iron Oxide Nanoparticles: Biosynthesis,Magnetic Behavior,Cytotoxic Effect

Iron oxide nanoparticles have attracted much attention because of their superparamagnetic properties and their potential applications in many fields such as magnetic storage devices, catalysis, sensors, superparamagnetic relaxometry (SPMR), and high-sensitivity biomolecule magnetic resonance imaging (MRI) for medical diagnosis and therapeutics. In this study, iron oxide nanoparticles (Fe₂O₃ NPs) have been synthesized using a taranjabin (camelthorn or persian manna) aqueous solution. The synthesized Fe₂O₃ NPs were identified through powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), field energy scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDX), vibrating-sample magnetometer (VSM) and Raman technics. The results show that the nanoparticles have a hexagonal structure with 20 to 60 nm in size. The cytotoxic effect of the synthesized nanoparticles has been tested upon application against lung cancer cell (A549) lines. It was found that there is no cytotoxic activity at lower concentrations of 200 μg/mL. The ability of the synthesized nanoparticles for lead removal in wastewaters was tested. Results show that highest concentration of adsorbent (50 mg/L) has maximum removal efficiency (96.73 %). So, synthesized Fe₂O₃ NPs can be a good candidate to use as heavy metals cleaner from contaminated waters.     

Electrochemistry of conductive polymers 39. Contacts between conducting polymers and noble metal nanoparticles studied by current-sensing atomic force microscopy

Electrical properties of contacts formed between conducting polymers and noble metal nanoparticles have been examined using current-sensing atomic force microscopy (CS-AFM). Contacts formed between electrochemically prepared pi-conjugated polymer films such as polypyrrole (PPy), poly(3-methylthiophene) (P3MeT), as well as poly(3,4-ethylenedioxythiophene) (PEDOT) and noble metal nanoparticles including platinum (Pt), gold (Au), and silver (Ag) have been examined. The Pt nanoparticles were electrochemically deposited on a pre-coated PPy film surface by reducing a platinum precursor (PtCl62-) at a constant potential. Both current and scanning electron microscopic images of the film showed the presence of Pt islands. The Au and Ag nanoparticles were dispersed on the P3MeT and PEDOT film surfaces simply by dipping the polymer films into colloid solutions containing Au or Ag particles for specified periods (5 to approximately 10 min). The deposition of Au or Ag particles resulted from either their physical adsorption or chemical bonding between particles and the polymer surface depending on the polymer. When compared with PPy, P3MeT and PEDOT showed a stronger binding to Au or Ag nanoparticles when dipped in their colloidal solutions for the same period. This indicates that Au and Ag particles are predominantly linked with the sulfur atoms via chemical bonding. Of the two, PEDOT was more conductive at the sites where the particles are connected to the polymer. It appears that PEDOT has better aligned sulfur atoms on the surface and is strongly bonded to Au and Ag nanoparticles due to their strong affinity to gold and silver. The current-voltage curves obtained at the metal islands demonstrate that the contacts between these metal islands and polymers are ohmic.     

新型耐甲醇氧还原电催化剂——氮掺杂中空碳微球@铂纳米粒子复合材料

通过模板法制备了一种新型耐甲醇氧还原电催化剂——氮掺杂中空碳微球@铂纳米粒子复合材料(HNCMS@PtNPs)。首先,将铂纳米粒子负载于氨基化二氧化硅微球上,获得PtNPs/SiO₂复合材料。然后通过多巴胺自聚合反应在PtNPs/SiO₂复合材料上包裹聚多巴胺(PDA)膜,将其在氮气气氛中直接进行碳化处理并通过氢氟酸溶液刻蚀去除SiO₂,获得了内嵌有PtNPs的氮掺杂中空碳微球,标记为HNCMS@PtNPs复合材料。采用扫描电子显微镜、透射电子显微镜、X射线衍射仪、拉曼光谱仪、比表面积分析仪和X射线光电子能谱仪对HNCMS@PtNPs复合材料的形貌和结构进行了表征。采用循环伏安法和线性扫描伏安法研究了HNCMS@PtNPs复合材料的电催化氧还原性能。结果表明：HNCMS@PtNPs催化剂的Pt载量高达11.9%(w,质量分数),对氧还原反应具有高电催化活性、高稳定性和优良的抗甲醇性能,是一种具有应用潜力的直接甲醇燃料电池(DMFCs)阴极电催化剂。     

Preparation of Polypyrrole/Poly(methyl methacrylate) Core-Shell Nanoparticles in Four-Component Microemulsion Media

Electrically conductive polypyrrole (PPy)/poly(methyl methacrylate) (PMMA) core-shell nanoparticles were synthesized by two-step microemulsion polymerization. PPy core particles were prepared in a four-component microemulsion system, which was formed with surfactant cetyltrimethyl ammonium bromide (CTAB), cosurfactant n-pentanol, water, and pyrrole. Ferric chloride and iodine was added as the oxidant and the dopant, respectively. Then the PPy nanoparticles were coated with PMMA to prepare PPy/PMMA core-shell nanoparticles. The morphology of PPy/PMMA core-shell nanoparticles was characterized with transmission electron microscopy (TEM). Fourier transform infrared (FTIR) spectroscopy was used to characterize the structure of the samples. The electrical conductivities of samples were studied by a Hall effect testing instrument. Despite being coated with a layer of insulation, the conductivity of the composite PPy/PMMA core-shell nanoparticles could still reached to 7.856 × 10^?1 S/cm.     

Magnetic nanosensor particles in luminescence upconversion capability

Nanoparticles (NPs) exhibit interesting size-dependent electrical, optical, magnetic, and chemical properties that cannot be observed in their bulk counterparts. The synthesis of NPs (i.e., crystalline particles ranging in size from 1 to 100 nm) has been intensely studied in the past decades. Magnetic nanoparticles (MNPs) form a particularly attractive class of NPs and have found numerous applications such as in magnetic resonance imaging to visualize cancer, cardiovascular, neurological and other diseases. Other uses include drug targeting, tissue imaging, magnetic immobilization, hyperthermia, and magnetic resonance imaging. MNPs, due to their magnetic properties, can be easily separated from (often complex) matrices and manipulated by applying external magnetic field. Near-infrared to visible upconversion luminescent nanoparticles (UCLNPs) form another type of unusual nanoparticles. They are capable of emitting visible light upon NIR light excitation. Lanthanide-doped (Yb, Er) hexagonal NaYF? UCLNPs are the most efficient upconversion phosphors known up to now. The use of UCLNPs for in vitro imaging of cancer cells and in vivo imaging in tissues has been demonstrated. UCLNPs show great potential as a new class of luminophores for biological, biomedical, and sensor applications. We are reporting here on our first results on the combination of MNP and UCLNP technology within an ongoing project supported by the DFG and the FWF (Austria).     

Measurement of nanoparticles by light-scattering techniques

Nanoparticles (NPs), due to their unique physical and chemical properties, especially their minute particle size (?100 nm), find applications in numerous industrial, commercial and consumer products. After their end-user applications, these NPs find their way into the environment and food products. The NPs so discharged need to be quantified accurately to determine their toxicity and exposure levels.At this time, there is a need to develop a unified method for their determination. There are plenty of techniques available in the market that were initially used for colloidal particles (e.g., microscopy, spectroscopy and the recent addition of magnetic resonance), but each of these techniques has a certain degree of uncertainty.Further, sample homogeneity, sample preparation, instrument-operating procedures, and statistical practices are likely to add to the complexity of the problem. In this context, this review attempts to understand the widely-used light-scattering techniques, including their theory, practice and real-world use in determination of NPs in environmental and food applications.     

Fe3O4/Polypyrrole/Au nanocomposites with core/shell/shell structure: synthesis, characterization, and their electrochemical properties

Uniform Fe3O4 nanospheres with a diameter of 100 nm were rapidly prepared using a microwave solvothermal method. Then Fe304/polypyrrole (PPy) composite nanospheres with well-defined core/shell structures were obtained through chemical oxidative polymerization of pyrrole in the presence of Fe3O4; the average thickness of the coating shell was about 25 nm. Furthermore, by means of electrostatic interactions, plentiful gold nanoparticles with a diameter of 15 nm were assembled on the surface of Fe3O4/PPy to get Fe3O4/PPy/Au core/shell/shell structure. The morphology, structure, and composition of the products were characterized by transmission electronic microscopy (TEM), scanning electronic microscopy (SEM), X-ray powder diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The resultant nanocomposites not only have the magnetism of Fe3O4 nanoparticles that make the nanocomposites easily controlled by an external magnetic field but also have the good conductivity and excellent electrochemical and catalytic properties of PPy and Au nanoparticles. Furthermore, the nanocomposites showed excellent electrocatalytic activities to biospecies such as ascorbic acid (AA).     

A multiscale structural study of nanoparticle films prepared by the Langmuir–Blodgett technique

Arrays of magnetic nanoparticles (NPs) represent a very interesting challenge toward the development of new devices for magnetic applications such as data storage and spintronic. The final properties of such assemblies depending essentially on the spatial arrangement of NPs, it is of first importance to investigate precisely their structure. Here, the structure of monolayer and multilayer films of magnetic iron oxide NPs assembled by the Langmuir–Blodgett (LB) technique has been studied by usual techniques such as SEM, AFM and ellipsometry and by a new and an easy to process enhanced optical technique: the Surface Enhancement Ellipsometry Contrast (SEEC) microscopy. This technique is based on the use of a new generation of microscope slides used as substrates which allow the strong enhancement of the sample contrast to a point where it becomes possible to visualize the structure of monolayer and multilayer films at the nanoscale with a conventional optical microscope. The SEEC microscopy is demonstrated to be complementary to usual characterization techniques to study the structure of NPs films, especially for films containing very small nanosized NPs which are more difficult to analyze by usual techniques. While the film structure is investigated with lateral resolution of microns, the layer thickness is analyzed at the nanoscale (with a precision of 0.3 nm) with a close fit to the experimental measurements on local (AFM) and on larger (ellipsometry) areas. This technique presents the advantage to visualize directly the topography of NPs assemblies on very large areas by extracting information such as the height profile, the film roughness and generating 3D images.     

Rigid POSS Nanofiller Regulated the Interfacial Self-assembly of Particles into 2D Monolayer Superlattice with Fixed Interparticle Spacing†

Plasmonic superlattices of nanoparticles (NPs) possess unique “surface lattice resonances” properties that facilitates their wide applications in plasmonic sensing, photocatalysis, and nanoscale light manipulation. However, it is still challenging to manufacture superlattices with precisely controllable NPs distance and break the size limitation of NPs. Herein, we provided an effective strategy to construct NPs superlattices via shape-persistent polyhedral oligosilsesquioxane (POSS) molecular nanoparticles govern interfacial assembly. As a nanoscale molecule with diameter of 1.5 nm, the POSS-SH molecule provides sufficient rigid steric hindrance and hydrophobic effect for tailoring the uniformity and controllable distance between NPs in superlattices. Interestingly, synergistically with hydrophilic ligands of polyethylene glycol (PEG-SH) with optimized ratio, the rigid POSS ligands can effectively regulate the distance between NPs in a fixed range of 2.3—2.8 nm, which is independent of ligands molecular weight and particle size. Furthermore, the effective approach can be universal to anisotropic NPs for manufacturing monolayer films with high NPs density. We believe this nanoscale molecule tailored interfacial self-assembly strategy can effectively break the size of NPs and assembly obstacles for superlattice monolayer film. Additionally, the definite distance between NPs in superlattices can minimize optical energy attenuation and facilitates the applications such as surface-enhanced Raman spectroscopy and photocatalysis.      

Molecular Assembly by Sequential Ionic Adsorption of Nanocrystalline TiO2 and a Conjugated Polymer

Abstract

Cationic nanocrystalline TiO₂ particles have been synthesized for which the size and composition of the nanoparticles were analyzed by a transmission emission microscopy and energy dispersive x‐ray spectrometer (EDXS). Multilayered films have been fabricated by sequential adsorption of TiO₂ nanoparticles and poly(3‐thiophene acetic acid) (PTAA). Each layer of the nanoparticles and PTAA in the thin film has also been characterized by x‐ray photoelectron spectroscopy, atomic force microscopy, and UV‐visible spectroscopy. These types of multilayered nanocomposite films may find applications in the fabrication of efficient light harvesting photovoltaic cells.     

金纳米粒子与聚吡咯纳米管的复合及其SERS效应研究

通过柠檬酸盐与HAuCl4水溶液在微沸状态下反应制备的金纳米粒子因其特殊的表面与界面效应在光学、生物学和催化化学领域得到了广泛应用,而聚吡咯(PPy)具有环境稳定性好、电导率高且变化范围大、容易合成等优点,聚吡咯纳米管可用作导电材料、酶封装材料、抗静电材料,也可用于制备传感器、传动器、固体电解质电容器等。     

Synthesis, characterization, and self-assembly of protein lysozyme monolayer-stabilized gold nanoparticles

Lysozyme monolayer-protected gold nanoparticles (Au NPs) which are hydrophilic and biocompatible and show excellent colloidal stability (at low temperature, ca. 4 degrees C), were synthesized in aqueous medium by chemical reduction of HAuCl4 with NaBH4 in the presence of a familiar small enzyme, lysozyme. UV-vis spectra, transmission electron microscopy (TEM), atomic force microscopy, and X-ray photoelectron spectroscopy characterization of the as-prepared nanoparticles revealed the formation of well-dispersed Au NPs of ca. 2 nm diameter. Moreover, the color change of the Au NP solution as well as UV-vis spectroscopy and TEM measurements have also demonstrated the occurrence of Ostwald ripening of the nanoparticles at low temperature. Further characterization with Fourier transform infrared spectroscopy (FTIR) and dynamic light scattering indicated the formation of a monolayer of lysozyme molecules on the particle surface. FTIR data also indicated the intactness of the protein molecules coated on Au NPs. All the characterization results showed that the monodisperse Au NPs are well-coated directly with lysozyme. Driven by the dipole-dipole attraction, the protein-stabilized Au NPs self-assembled into network structures and nanowires upon aging under ambient temperature. On the basis of their excellent colloidal stability, controlled self-assembly ability, and biocompatible surface, the lysozyme monolayer-stabilized Au NPs hold great promise for being used in nanoscience and biomedical applications.     

聚丙烯酸功能化高效发光的La1-xEuxF3纳米晶合成及细胞成像

Monodisperse La_1-xEu_xF₃ nanoparticles (NPs) were functionalized by poly(acrylic acid) (PAA) via a one-pot modified hydrothermal method. The morphology, crystal structure, surface groups, and luminescence properties of the as-produced La_1-xEu_xF₃@PAA NPs were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and photoluminescence (PL) spectroscopy. The produced nanoparticles were (7±3) nm in size, water soluble, and buffer stable, with good photostability and biocompatibility. In vitro imaging revealed the low cytotoxicity of the as-synthesized NPs incubated with HeLa cancer cells. Thus, the colloidal La_1-xEu_xF₃@PAA NPs exhibit great potential for use as optical imaging probes in biological applications.     

Single nanoparticle spectroscopy for real-time in vivo quantitative analysis of transport and toxicity of single nanoparticles in single embryos

Nanomaterials exhibit distinctive physicochemical properties and promise a wide range of applications from nanotechnology to nanomedicine, which raise serious concerns about their potential environmental impacts on ecosystems. Unlike any conventional chemicals, nanomaterials are highly heterogeneous, and their properties can alter over time. These unique characteristics underscore the importance of study of their properties and effects on living organisms in real time at single nanoparticle (NP) resolution. Here we report the development of single-NP plasmonic microscopy and spectroscopy (dark-field optical microscopy and spectroscopy, DFOMS) and ultrasensitive in vivo assay (cleavage-stage zebrafish embryos, critical aquatic species) to study transport and toxicity of single silver nanoparticles (Ag NPs, 95.4 ± 16.0 nm) on embryonic developments. We synthesized and characterized purified and stable (non-aggregation) Ag NPs, determined their sizes and doses (number), and their transport mechanisms and effects on embryonic development in vivo in real time at single-NP resolution. We found that single Ag NPs passively entered the embryos through their chorionic pores via random Brownian diffusion and stayed inside the embryos throughout their entire development (120 h), suggesting that the embryos can bio-concentrate trace NPs from their environment. Our studies show that higher doses and larger sizes of Ag NPs cause higher toxic effects on embryonic development, demonstrating that the embryos can serve as ultrasensitive in vivo assays to screen biocompatibility and toxicity of the NPs and monitor their potential release into aquatic ecosystems.     

Preparation of conductive,flexible and transparent films by in situ deposition of polypyrrole nanoparticles on polyethylene terephthalate

In this study polypyrrole (PPy) nanoparticles were deposited as a thin film on the modified surface of polyethyleneterephthalate (PET) by in situ chemical polymerization in the presence of sodium dodecylsulfate (SDS), sodium dodecylbenzenesulfonate (DBSNa) and mixture of them as the surfactant. The surface of PET was modified by KOH before deposition and was investigated for conductivity and adhesion of PPy nanoparticles to PET. Resulting conductive flexible films were characterized by UV–Vis spectroscopy, fieldemission scanning electron microscopy, contact angle measurements and four-point-probe technique for conductivity. Direct morphological observation (FESEM) and electrical measurements indicated that the morphology, conductivity and the nature of deposited PPy films depend on surfactant, surface modification of PET and monomer concentration. In optimized process condition, uniform conductive films of PPy were obtained with good adhesion to PET.     

Synthesize,Characterization, and Corrosion Inhibition of Polypyrrole Thin Films on Copper

Polypyrrole (PPy) coatings were synthesized on copper by electrochemical polymerization of pyrrole monomer in aqueous acidic and basic solutions by cyclic voltammetry. The coatings were characterized with CV, UV-visible absorption spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, and scanning electron microscopy (SEM) techniques. The corrosion protection aspects of PPy coatings have been investigated using the potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The potentiodynamic polarization measurements show that the PPy coating has ability to protect the copper against corrosion. It was concluded that a complete corrosion protective PPy film could not be obtained through direct electro-oxidation procedure. This may be due to copper dissolution in the monomer oxidation potential range.     

Photocatalytic polypyrrole-TiO2-nanoparticles composite thin film generated at the air-water interface

Herein, we report a new method of generation of TiO(2) nanoparticles (NPs) incorporated thin films of polypyrrole (PPy) at the air-water interface. Aqueous TiO(2) NPs when treated with H(2)O(2) and left in a chamber of pyrrole vapor resulted in the formation of a film at the interface, in addition to bulk precipitate. Spectroscopic, X-ray diffraction, and electron microscopic measurements establish the formation of a thin film of PPy with the incorporation of TiO(2) NPs. The TiO(2)-containing PPy films when transferred onto glass substrates were able to photo catalyze the decomposition of aqueous organic dyes: methyl orange and methylene blue. Further, these films could also photo catalyze the oxidation of iodide to triiodide ions in aqueous potassium iodide solution. We find that the PPy-TiO(2) composite films catalyze the reactions in the presence of light more efficiently than a suspension of TiO(2) NPs.     

A general route to prepare one- and three-dimensional carbon nanotube/metal nanoparticle composite nanostructures

Adsorption of polyethyleneimine (PEI)-metal ion complexes onto the surfaces of carbon nanotubes (CNTs) and subsequent reduction of the metal ion leads to the fabrication of one-dimensional CNT/metal nanoparticle (CNT/M NP) heterogeneous nanostructures. Alternating adsorption of PEI-metal ion complexes and CNTs on substrates results in the formation of multilayered CNT films. After exposing the films to NaBH4, three-dimensional CNT composite films embedded with metal nanoparticles (NPs) are obtained. UV-visible spectroscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy are used to characterize the film assembly. The resulting (CNT/M NP)n films inherit the properties from both the metal NPs and CNTs that exhibit unique performance in surface-enhanced Raman scattering (SERS) and electrocatalytic activities to the reduction of O2; as a result, they are more attractive compared to (CNT/polyelectrolyte)n and (NP/polyelectrolyte)n films because of their multifunctionality.     

Biogenic Synthesis of CuO,ZnO, and CuO–ZnO Nanoparticles Using Leaf Extracts of Dovyalis caffra and Their Biological Properties

Biogenic metal oxide nanoparticles (NPs) have emerged as a useful tool in biology due to their biocompatibility properties with most biological systems. In this study, we report the synthesis of copper oxide (CuO), zinc oxide (ZnO) nanoparticles (NPs), and their nanocomposite (CuO–ZnO) prepared using the phytochemical extracts from the leaves of Dovyalis caffra (kei apple). The physicochemical properties of these nanomaterials were established using some characterization techniques including X-ray diffraction analysis (XRD), ultraviolet-visible spectroscopy (UV-vis), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX). The XRD result confirmed the presence of a monoclinic CuO (Tenorite), and a hexagonal ZnO (Zincite) nanoparticles phase, which were both confirmed in the CuO–ZnO composite. The electron microscopy of the CuO–ZnO, CuO, and ZnO NPs showed a mixture of nano-scale sizes and spherical/short-rod morphologies, with some agglomeration. In the constituent’s analysis (EDX), no unwanted peak was found, which showed the absence of impurities. Antioxidant properties of the nanoparticles was studied, which confirmed that CuO–ZnO nanocomposite exhibited better scavenging potential than the individual metal oxide nanoparticles (CuO, and ZnO), and ascorbic acid with respect to their minimum inhibitory concentration (IC₅₀) values. Similarly, the in vitro anticancer studies using MCF7 breast cancer cell lines indicated a concentration-dependent profile with the CuO–ZnO nanocomposite having the best activity over the respective metal oxides, but slightly lower than the standard 5-Fluorouracil drug.     

Facile synthesis of silver doped-copper oxide nano materials utilizing areca catechu (AC) leaf extract and their antidiabetic and anticancer studies

The present research highlights physical significance of green combination of metal oxide nanomaterials utilizing medicinal plant which has widely analyzed in different medical applications i.e., medicinal science, therapeutics. In this paper, we discussed environmentally benign approach for synthesizing silver doped copper oxide nanoparticles (Ag–CuO NPs) utilizing (ACLE). Scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) were utilized to confirm the size, crystalline structure and surface morphology of the obtained nanomaterials. The monoclinic crystalline structure of the Ag–CuO NPs as produced was revealed by XRD patterns. Morphological analysis disclosed the nano-based spherical configuration of Ag–CuO NPs, as well as their morphology and elemental composition. The anti-diabetic effect of Ag–CuO NPs was further investigated utilizing a yeast cell model and amylase inhibition. Here, a decrease in intracellular glucose and a delay in carbohydrate digestion indicate promising antidiabetic action. Furthermore, the prepared nanomaterial showed anticancer potential against the MCF-7 cancer cell line, with an IC ₅₀ value of 11.21 g/ml.