Voltammetric determination of mesotrione at hanging mercury drop electrode

A study of the electrochemical reduction of the mesotrione pesticide on a hanging mercury drop electrode (HMDE) was performed as a basis for the development of a sensitive analytical method for natural samples. The electrochemical characteristics of herbicide mesotrione dissolved in a phosphate buffer (pH 7.0) have been determined by means of electrochemical techniques such as cyclic voltammetry (CV) and differential pulse voltammetry (DPV) over a wide range of pH from 2.0 to 10.0. The experimental parameters, such as electrolyte type and its pH, pulse amplitude, and scan rate were optimized. The method was applied to the determination of the pesticide in a spiked soil samples. Using this method, a linear calibration curve for mesotrione was obtained up to the 0.1 μM range in pH 7 phosphate buffer solution with a detection limit (S/N = 3) of 50 nM. The method can be applied successfully to the determination of mesotrione in soils. The text was submitted by the authors in English.     

Electrochemical reduction of cefminox at the mercury electrode and its voltammetric determination in urine

The electrochemical behaviour of cefminox in phosphate buffers solutions over pH range 2.0-9.0 using differential-pulse polarography, DC-tast polarography, cyclic voltammetry and linear sweep voltammetry (staircase) has been studied. In acidic media, a non reversible diffusion-controlled reduction involving two electrons occurs and the mechanism for the reduction was suggested. A differential-pulse polarographic method for the determination of cefminox in the concentration range 5.8×10⁻⁶-6.0×10⁻⁵ M with a detection limit of 1.76×10⁻⁶ M was proposed. Also, a method based on controlled adsorptive pre-concentration of cefminox on the hanging mercury drop electrode followed by linear sweep voltammetry, allows its determination in the concentration range 8.3×10⁻⁸-1.5×10⁻⁶ M with a detection limit of 2.47×10⁻⁸ M. These methods have been used for the direct determination of cefminox in human urine with recoveries between 98 and 103%, and precision around ±2%.     

Voltammetric determination of some organic compounds of arsenic reduced at the mercury electrode

Cyclic voltammetric scans for methylarsonic acid, dimethylarsinic acid and 3-acetamido-4-hydroxyphenylarsonic acid at a mercury electrode in an acidic medium show anodic adsorption waves when the starting potential is sufficiently negative; the related arsines are formed on the electrode. Detection limits are at the micromolar level for the absorption peak found at about ?0.1 V vs. SCE for all three compounds. Interferences are discussed.     

Electrochemical reduction of ciprofloxacin at the mercury electrode and its voltammetric determination in tablet and urine

In this study a reduction square wave voltammetric method was developed and validated for the direct determination of ciprofloxacin (CIP) in pharmaceutical formulation and biological fluid using hanging mercury dropping electrode (HMDE) surface. Best results were obtained for the quantitative determination of CIP in 0.02 M Britton-Robinson buffer at pH 2.5 and at a potential of ?1300 mV vs. Ag/AgCl reference electrode. Various experimental and instrumental parameters affecting the peak current and potential of CIP electrochemical reduction were investigated and optimized. The monitored peak current was directly proportional to the concentration of CIP, where it exhibited a linear response in the range 3.0 × 10^?7–2 × 10^?6 M (r = 0.99). The accuracy of the proposed method was concluded based on the value of mean recovery of 98 ± 0.72 % with RSD of 0.181 % at a detection limit of 7 × 10^?9 M. Possible interferences by various substances usually present in pharmaceutical formulations have been also evaluated. After validating the proposed method, the applicability of this voltammetric method was demonstrated by estimating CIP in its pharmaceutical formulation and spiked human urine, where values of mean recoveries of 97 ± 1.0% and 108.0 ± 2.0% were obtained, respectively.     

Voltammetric behavior of naratriptan and its determination in tablets

The electrochemical behavior and the analytical application of the selective serotonin agonist naratriptan (N-methyl-3-(1-methyl-4-piperidyl)indole-5-ethanesulfonamide) are presented herein. Naratriptan exhibits an anodic response in aqueous media over a broad pH range (pH 2-12), as determined by differential pulse voltammetry and cyclic voltammetry using glassy carbon electrodes. This response is irreversible in nature, diffusion-controlled and probably caused by the oxidation of the naratriptan indole moiety. The differential pulse voltammetry technique was performed in 0.1 mol L⁻¹ Britton-Robinson buffer (pH = 3), which elicited the most reproducible results. The percentage of naratriptan recovery was 102.1 ± 1.8%, and the limits of detection and quantitation were 9.5 × 10⁻⁶ and 2.0 × 10⁻⁵ mol L⁻¹, respectively. Selectivity trials revealed that the oxidation signal of the drug was not disturbed by the presence of excipients or degradation products. Thus, we conclude that the method presented herein is useful for the quantification of naratriptan in pharmaceutical drugs and that this method requires no separations or extractions. Finally, this voltammetric method was successfully applied to determine the quantity and the content uniformity of naratriptan in drug tablets. A comparison of this technique to the standard high-performance liquid chromatography technique was conducted at the end of our study.     

Voltammetric determination of trace mercury at a sonogel-carbon electrode modified with poly-3-methylthiophene

The sonogel-carbon electrode is a new class of sol-gel electrode that exhibit favourable mechanics and electrics properties to be used as electrochemical sensor. In this paper, a modified sonogel-carbon electrode is proposed to determine mercury at trace levels. The modified electrode is obtained by electropolymerization of 3-methylthiophene on the surface of a bare sonogel-carbon electrode. This electrode shows high selectivity and sensitivity and linear response towards Hg(II), with a detection limit of 1.4 × 10⁻³ mg l⁻¹. The electrode is reusable by a simple chemical cleaning procedure. No deterioration was observed in the electrode response during at least 1 week of successive measurements.     

Voltammetric determination of benzidine and its derivatives, at a glassy-carbon electrode

Conditions have been found for the determination of benzidine, o-tolidine, o-dianisidine, 3,3'-diaminobenzidine and 3,3'-dichlorobenzidine by classical and differential pulse voltammetry at a glassy-carbon stationary or rotating electrode, in the concentration range 10(-5)-10(-3)M. The mechanism of the oxidation is discussed and applications are presented for the determination of these chemical carcinogens and their mixtures either directly, or after preliminary separation by extraction or thin-layer chromatography.     

Voltammetric trace determination of ubiquinones at mercury electrodes

Summary Voltammetric methods were developed for the determination of ubiquinones on the basis of their adsorption and redox behaviour at mercury electrodes. Linear calibration plots were obtained in the concentration range between 10^–4 mol/l and 2.3·10^–5 mol/l from differential pulse voltammetric measurements under experimental conditions avoiding significant adsorption of the analyte. A remarkable decrease of the detection limit down to 10^–7 mol/l was achieved with the help of adsorptive accumulation of ubiquinone molecules at the mercury electrode followed by differential pulse detection. The resulting non-linear calibration plot was explained with a model, which takes into account both adsorption and diffusion of the analyte.     

Voltammetric determination of ubiquinone adsorption at mercury electrodes

Adsorption isotherms of the ubiquinones UQ₄, UQ₆, UQ₉ and UQ₁₀ have been determined by two independent voltammetric techniques at the stationary mercury/solution interface. While the redox behavior is essentially the same for all homologues investigated, the molar free enthalpy of adsorption Δ_AG increases steadily with the number of isoprenic units from UQ₄ to UQ₁₀. In case of UQ₁₀, the experiments have been carried out with three different potentiostatic systems. This allows one to estimate the accuracy of the methods which are direct ones and do not require calibration.     

Voltammetric behavior of urapidil and its determination at multi-wall carbon nanotube paste electrode

The voltammetric behavior of urapidil was investigated. In pH 6.8 Britton-Robinson buffer, an irreversible oxidation peak of urapidil at 0.62 V (versus SCE) at a multi-wall carbon nanotube paste electrode (MWNT-PE) was observed, which was more sensitive with lower potential than that at the carbon paste electrode (CPE). The oxidation of urapidil was a two-electron and two-proton process with adsorption character. A differential pulse voltammetric method was proposed for the determination of urapidil. The peak current of the oxidation peak of urapidil was linearly with its concentration in a range from 5.0 × 10⁻⁸ to 2.0 × 10⁻⁶ mol/L at open-circuit accumulation for 60 s, with a detection limit of 3.8 × 10⁻⁸ mol/L. The proposed method was employed to determine urapidil in urapidil tablets.     

Voltammetric sensor for nitrite determination based on its electrocatalytic reduction at the surface of p-duroquinone modified carbon paste electrode

A p-duroquinone (tetramethyl-p-benzoquinone) modified carbon paste electrode (DMCPE) was employed to study the electrocatalytic reduction of nitrite in aqueous solutions using cyclic voltammetry (CV), double potential-step chronoamperometry, and differential pulse voltammetry (DPV). It has found that under an optimum condition (pH 1.00), the reduction of nitrite at the surface of DMCPE occurs at a potential of about 660 mV less negative than that of an unmodified carbon paste electrode (CPE). The catalytic rate constant, k′_h, based on Andrieux and Saveant theoretical model was calculated as for scan rate 10 mV s^-1. Also, the apparent diffusion coefficient, D _app, was found as 2.5 × 10^–10 and 3.61 × 10^–5 cm² s^-1 for p-duroquinone in carbon paste matrix and nitrite in aqueous buffered solution, respectively. The values for αn_α were estimated to be −0.65 and −0.19 for the reduction of nitrite at the surface of DMCPE and CPE, respectively. The electrocatalytic reduction peak currents showed a linear dependence on the nitrite concentration, and a linear analytical curve was obtained in the ranges of 5.0 × 10^–5 M to 8.0 × 10^–3 M and 6.0 × 10^–6 M to 8.0 × 10^–4 M of nitrite concentration with CV and DPV methods, respectively. The detection limits (2σ) were determined as 2.5 × 10^–5 M and 4.3 × 10^–6 M by CV and DPV methods. This method was also applied as a simple, selective and precise method for determination of nitrite in real samples (the weak liquor from the wood and paper factory of Mazandaran province in Iran) by using a standard addition method.     

Voltammetric determination of selenosulfate ions at a mercury-film electrode

A procedure is proposed for the voltammetric determination of selenium as selenosulfate (SO₃Se^2?) ions at a mercury-film electrode (MFE). Selenosulfate ions are determined in the range from 2 × 10^?4 to 1.0 × 10^?3 M without analyte accumulation, using peak current at ?0.92 ± 0.02 V and in the range from 1 × 10^?7 to 2 × 10^?4 M after analyte accumulation with the open circuit, using peak current at ?1.18 ± 0.03 V as the analytical signal. The mechanisms of SO₃Se^2? reduction at an MFE under the conditions of direct voltammetry and stripping voltammetry with accumulation are proposed and discussed.     

Voltammetric determination of azithromycin at the carbon paste electrode

Azithromycin (AZ) is the first member of a class of macrolide azalides antibiotics called azolides. A simple and selective square-wave voltammetric (SWV) method has been developed for the determination of azithromycin in pure form, in pharmaceutical preparation and in biological samples. Determination of azithromycin was accomplished with hand-make carbon paste electrode (CPE) in oxidative screen mode. The counter and reference electrodes were a Pt wire and a Ag/AgCl, respectively. Various parameters that can influence the peak signal (effect of buffer, ionic strength, accumulation time, pH and the composition of the paste) have been scrutinized. The best results were obtained in acetonitrile—aqueous 1 M sodium acetate-acetic acid buffer (pH 4.6) containing 0.1 M KCl (1:9; v/v) using a 15% paraffin oil CPE. The limits of detection and quantification of the pure drug are 0.463 and 1.544 ppb (with the correlation coefficient, r=0.9785and the standard deviation, S.D.=0.1 (n=5), for the accumulation time of 60 s), respectively. The method was successfully applied to the determination of the drug in urine and two forms of pharmaceutical formulations. Recoveries were 99.2—100.5% with S.D.=0.1—and 0.8% (n=5).     

Voltammetric determination of mercury(II) at a carbon paste electrode in aqueous solutions containing tetraphenylborate ion

The determination of mercury(II) ions can be achieved by monitoring the decrease in the oxidation peak of the tetraphenylborate ion in the presence of this metal ion at a carbon paste electrode. The reaction between mercury(II) and the tetraphenylborate ion results in the formation of diphenylmercury, thus providing the method with good selectivity over other metal ions. Using anodic stripping voltammetry in a neutral electrolyte, a linear dependence of the decrease of peak height was observed on increasing the mercury(II) concentration in the range 1 x 10(-6)-8 x 10(-9)M mercury(II). Zinc(II), cadmium(II), lead(II), nickel(II), cobalt(II), tin(II), potassium(I) and ammonium(I) ions did not interfere at a 1000-fold concentration excess. Iron(III) and chromium(III) did not interfere at a 250-fold and 50-fold concentration excess, respectively. Following masking procedures, copper(II), bismuth(III) and silver(I) did not interfere at a 100-fold concentration excess. The method can be used to determine the concentration of mercury(II) in natural waters contaminated by this metal.     

Voltammetric determination of niclosamide at a glassy carbon electrode

A very sensitive and selective procedure was developed for the determination of niclosamide based on square-wave voltammetry at a glassy carbon electrode. Cyclic voltammetry was used to investigate the electrochemical reduction of niclosamide at a glassy carbon electrode. Niclosamide was first irreversibly reduced from NO2 to NHOH at -0.659 V in aqueous buffer solution of pH 8.5. Reversible and well defined peaks at -0.164 V and -0.195 V (vs. Ag/AgCl) were obtained that are responsible for two electron peaks between NHOH and NO. Following optimisation of the voltammetric parameters, pH and reproducibility, a linear calibration curve over the range 5 x 10(-8)-1 x 10(-6) mol dm(-3) was achieved. The detection limit was found to be 2.05 x 10(-8) mol dm(-3) niclosamide. For eight successive determinations of 5 x 10(-7) mol dm(-3) niclosamide, a relative standard deviation of 2.4% was obtained. This voltammetric method was applied to the direct determination of niclosamide in tablets. The results of the analysis suggest that the proposed method has promise for the routine determination of niclosamide in the products examined.     

甘草苷在悬汞电极上的电化学行为及方法研究

运用循环伏安法(CV)考察了甘草苷在悬汞电极(HMDE)上的电化学还原行为,在-0.7~-1.7 V(vs.SCE)电位窗口及0.10 mol/L(NH4)2SO4溶液中甘草苷在HMDE上的循环伏安行为是一在低扫描速度(<100 mV/s)下受吸附控制,在高扫描速度下受扩散控制的不可逆还原过程,还原峰电位(Epc)为-1.491 V。运用计时库仑法(CC)、计时电流法(CA)测定并计算了甘草苷的电荷传递系数α、扩散系数D以及表观速率常数Kf等电极过程动力学参数。初步探讨了甘草苷在HMDE上的反应机理,同时运用方波伏安法(SWV)研究了甘草苷在HMDE上的方波伏安行为,还原峰电流与其浓度在1.2×10-6~1.2×10-5mol/L及1.2×10-5~1.2×10-3mol/L范围内呈良好的线性关系,相关系数R=0.9936及0.9966,检出限8.0×10-7mol/L,据此可建立直接电化学测定甘草苷含量的方法。     

Electrochemical reduction of secnidazole and its determination in tablets

The electrochemical reduction of secnidazole has been carried out in aqueous solution in the pH range of 2.0–12.0 by DC polarography, AC polarography and cyclic voltammetry. Two well-defined reduction waves appear in acidic media, whereas at higher pHs the two waves overlap. The variation of E_1/2 or E_p and I_lim or I_p with pH was studied. The diffusion-controlled nature of the waves was established and the irreversibility of the electrode process was verified by different criteria. The mechanism of reduction was discussed. A method for the detemination of secnidazole by DC polarography at pH 8.5 which allows quantitation over the 1 × 10⁻⁵ M-4 × 10⁻⁴ M range was proposed and applied to the determination of secnidazole in tablets. The mean recovery was 99.67% and the relative standard deviation was 0.89%. Excipients did not interfere in the determination.     

6-糠氨基嘌呤的电化学行为及与DNA的相互作用

应用循环伏安法、微分脉冲伏安法和紫外光谱法研究了6-糠氨基嘌呤(6-KT)在汞电极上的电化学行为及与小牛胸腺DNA的相互作用.结果发现,6-KT的循环伏安曲线显示两对表征为扩散控制和吸附控制的氧化还原波.扩散控制波的氧化峰电流随6-KT浓度在1.00×10-4～5.00×10-2mmol·L-1范围内呈现良好的线性关系.依据预吸附时间和溶液pH值对吸附控制波的还原峰电位和峰电流的影响,讨论了6-KT在汞电极上的吸附机理.另外,6-KT的扩散控制波的还原峰电流随DNA浓度的增加而减小,峰电位正移,紫外吸收峰出现明显的减色效应,认为6-KT乃通过部分插入作用与DNA结合,结合常数为2.60×103 L·mol-1.