共查询到20条相似文献,搜索用时 125 毫秒
1.
采用电感耦合射频等离子体(ICP)和介质阻挡放电(DBD)低温等离子体对高性能连续纤维表面进行改性,分别采用X光电子能谱(XPS)、原子力显微镜(AFM)和动态接触角测定仪(DCA)等分析测试手段系统地研究了等离子体处理时间、放电功率、放电气压等对连续碳纤维、聚苯并二噁唑(PBO)纤维改性处理前后,纤维表面状态、表面组成、表面形貌、浸润性能的变化规律以及经等离子体处理前后纤维增强双马树脂基复合材料界面结构与性能的影响关系及变化规律、复合材料界面粘结和破坏机理.研究结果表明,经过等离子体处理后,纤维表面接枝上了大量的含羧基、羟基等极性官能团,表面粗糙度增加,表面自由能增加,纤维浸润性能得到明显改善,导致纤维与双马树脂基体界面层间剪切强度(ILSS)明显提高,复合材料的破坏模式由未处理的界面脱粘破坏转变为等离子体处理后的树脂基体破坏.最后,对纤维表面时效性及其对纤维增强双马树脂基复合材料界面性能的影响关系也进行了论述. 相似文献
2.
针对气相生长碳纤维极易团聚及与树脂基体界面结合能力较差的难题,采用双氧水-浓硝酸二步法对VGCF进行表面改性处理。利用X射线衍射仪、热重分析仪、傅立叶红外光谱仪、紫外可见分光光度计等测试分析了改性前后VGCF的表面结构和在溶剂中的分散性,并以形状记忆聚氨酯为基体,采用溶液混合法制备了气相生长碳纤维/形状记忆聚氨酯的复合材料,测试了复合材料的力学性能。经过改性后,VGCF的石墨晶型结构几乎没有改变,VGCF表面的含氧官能团浓度得到较大提高,且其在有机溶剂中的分散性及分散稳定性也得到很大提高;在气相生长碳纤维/形状记忆聚氨酯的复合材料截面中,扫描电镜观察表明表面改性使得VGCF在基体中的分散性及与基体的界面结合能力都得到一定程度的提高;经二步法改性处理后的气相生长碳纤维比未处理气相生长碳纤维对复合材料的力学性能的增强效果更为明显。 相似文献
3.
树脂基复合材料具有比强度高、比模量大、耐高温、耐腐蚀、质轻等诸多优点,在航天军工、生物医疗、电子封装、体育器材等众多领域得到广泛应用。石墨烯作为一种典型的二维纳米材料,凭借其独特结构以及优异的物理化学性能而备受关注。近年来的研究表明石墨烯可以通过对增强纤维改性和对基体树脂改性的方法来提高树脂基复合材料的力学性能。本文介绍了石墨烯改性树脂基复合材料的增强增韧机理,对石墨烯改性纤维(碳纤维、玻璃纤维、芳纶纤维)增强复合材料以及树脂的改性方法进行了综述;着重阐述了石墨烯改性树脂基复合材料力学性能的研究进展,分析了石墨烯改性树脂基复合材料研究中依旧存在的两大问题,即石墨烯的分散性和界面结合问题,并对石墨烯改性树脂基复合材料的未来发展前景进行了展望。 相似文献
4.
分别用氧化法、稀土处理法、氧化后稀土处理法对碳纤维进行表面处理,然后开展拉伸试验来对不同方法处理的碳纤维填充聚四氟乙烯复合材料进行界面粘着研究,并在UMT-2MT型摩擦磨损试验机上对水润滑条件下聚四氟乙烯复合材料摩擦学性能进行研究,使用扫描电镜对磨损表面进行观察,研究结果表明稀土处理方法在提高复合材料摩擦学性能上优于氧化方法,稀土处理碳纤维填充的聚四氟乙烯复合材料优良的摩擦学性能来自于碳纤雏增强体与聚四氟乙烯基体间强的界面粘着力。 相似文献
5.
超高分子量聚乙烯(UHMWPE)纤维具有诸多优异性能,因此被广泛应用于纤维增强复合材料(FRP)。但是由于UHMWPE纤维表面光滑且无极性基团,与树脂基体粘接性差,可通过纤维表面改性有效提高FRP的界面强度,进而提升材料性能。本文总结了近几年基于化学处理、等离子体处理、电晕放电和辐射引发表面接枝等方法对UHMWPE纤维表面改性的研究进展,并对改性方法的发展进行了展望。 相似文献
6.
采用具有低固化收缩特性的苯并噁嗪树脂(benzoxazine,BOZ)对液体成型环氧树脂进行改性,以期在不改变液体成型树脂耐热性、工艺性及力学性能的前提下,大幅度降低树脂的固化收缩率.对比研究了不同BOZ含量改性树脂的固化收缩特性、固化反应特性、液体成型工艺性及力学性能.并采用真空辅助树脂浸渗(vacuum assisted resin infusion,VARI)工艺制备了单向碳纤维织物增强复合材料,研究了复合材料的力学性能.结果表明,加入BOZ对液体成型树脂的反应性、工艺性及耐热性影响不大,改性树脂的固化收缩随BOZ含量的提高逐渐减小,其中BOZ质量分数为15 wt%的改性树脂,较未改性树脂的固化收缩减小约80%,拉伸强度提高约19%,冲击强度提高约148%.以此改性树脂作为基体的复合材料相对于未改性树脂复合材料的拉伸强度提高约23%,层间剪切强度提高约9%,具有良好的力学性能和界面结合性能. 相似文献
7.
近些年来,碳纤维(CF)由于具有优异的力学性能,被用作复合材料的增强体.但CF表面缺少极性基团,呈现化学惰性,使CF与树脂(EP)之间的界面粘结性能较差.为了改善该问题,需要对CF表面进行改性.氧化石墨烯(GO)和碳纳米管(CNT)具有大的比表面积,且表面含有大量的极性基团,将二者引入CF表面,可以有效改善CF与EP之... 相似文献
8.
纳米SiO_2改性聚合物制备的关键在于提高纳米粒子与聚合物基体的相容性及分散性;对纳米SiO_2进行不同的表面改性及选择合适的复合材料制备方法可以改变纳米粒子与聚合物基体的界面结合方式以及相容性和分散性,进而在不同程度上影响材料的性能.本文介绍了改性前后纳米SiO_2与聚合物基体的多种界面结合方式,对近年来利用原位聚合法制备聚合物/纳米SiO_2复合材料的研究现状和进展进行了综述. 相似文献
9.
在三乙胺催化下,以己二酸和环氧树脂制备了己二酸改性环氧树脂(AAEP),通过考察反应温度等因素对己二酸转化率和AAEP环氧值的影响,得到了AAEP合成的最佳条件.用傅里叶变换红外光谱和核磁共振对AAEP进行了表征.用KOH中和AAEP得到己二酸改性环氧树脂钾盐(AAEPK),测试了AAEPK乳液的性质和AAEPK处理后碳纤维的分散性,并通过场发射扫描电子显微镜和X射线光电子能谱对碳纤维的表面形貌和基团进行了研究.结果表明,AAEPK具有高亲水性,适用于碳纤维处理剂,当AAEPK的浓度和吸附量分别为1.0%(质量分数)和3.0 mg/g时,处理剂可在纤维表面均匀分布,使得碳纤维在树脂基体中的分散性得到改善.研究了处理剂对碳纤维/环氧树脂复合材料弯曲和剪切性能的影响,发现处理后碳纤维短丝/环氧树脂复合材料的弯曲强度和碳纤维布/环氧树脂复合材料的层间剪切强度较未处理的试样分别增加了168%和113%,说明AAEPK处理后碳纤维在基体中分散性和黏结性的提高是碳纤维/环氧树脂复合材料力学性能提高的主要原因. 相似文献
10.
介绍了PBO(聚对苯撑苯并双噁唑)纤维的结构与性能,并针对该纤维作为复合材料增强体与树脂界面粘结性差的特点,评述了PBO纤维表面改性技术中的化学法、共聚改性、偶联剂处理、等离子处理、电晕处理和辐射处理法的研究进展,并比较了各种方法的改性效果及各自优缺点。 相似文献
11.
The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted
indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator
model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was
established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing
analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom.
Translated from Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997. 相似文献
12.
非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。 相似文献
13.
The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness. 相似文献
14.
Two vanilloids, (5 E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one ( 1) and 4-[3-hydroxydecyl]-2-methoxyphenol ( 2), isolated from the dried seeds of Grains of Paradise ( Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared. 相似文献
15.
In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992. 相似文献
16.
用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。 相似文献
17.
Main hydration products of two cement pastes, i.e. CSH-gel, portlandite ( P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time ( th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with ( th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with ( th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700 oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date. 相似文献
18.
The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides
and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques.
Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated.
Translated from Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997. 相似文献
20.
设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。 相似文献
|