尿样中铀同位素的ICP-MS快速测量技术研究

核事故状态下的应急处理,要求对环境介质中的放射性核素进行快速分析。尿样中铀同位素测量作为内照射剂量评价的主要手段,其分析效率越高,则对核事故中涉铀人员的安全救治越及时、有效。而尿样中其它无机离子是铀含量的106倍,导致ICP-MS测量过程中尿盐堵塞进样毛细管。为降低样品的含盐量并获得较好的检测结果,本文对样品预处理过程进行优化。采用先加热氧化去除有机物,再进行1～10倍稀释后测试样品的铀同位素丰度及浓度。结果表明：将25 mL样品稀释至100 mL后效果最佳,分析方法不确定度为5.4 %,回收率95 %~105 %。     

环境样品中铀的HR-ICP-MS测定

高分辨电感耦合等离子体质谱法(HR-ICP-MS)是痕量元素分析的有效手段。本文采用HR-ICP-MS对环境样品(土壤、底泥、茶叶、地表水)中铀浓度和同位素比值进行了测定。土壤、底泥、茶叶样品采用微波消解法进行溶解;水样采用45μm滤膜过滤后直接测定。实验对样品制备、仪器参数设定、记忆效应消除、质量歧视效应修正等进行了探索,建立了环境样品中痕量铀浓度和同位素比值测定方法。土壤制样过程中铀的加标回收率为97.7%,铀检出限0.51ng·L~(-1)。     

同位素稀释超高效液相色谱串联质谱测定尿液中苯系物和三氯乙烯代谢产物

建立同位素内标稀释,超高效液相色谱串联质谱(Uhra performance liquid chromatography-tandem mass sepctrometry,UPLC-MS/MS)同时测定尿中苯系物和三氯乙烯代谢产物的方法,并用于孕妇尿样的分析.尿样过经含同位素内标的醋酸铵缓冲液稀释10倍后,过滤,取滤液进样分析.采用C18色谱柱,梯度洗脱进行UPLC分离,电喷雾负离子扫描多反应监测(Multiple reaction monitoring,MRM)模式检测.方法检出限在0.0350～ 1.75 μg/L之间,方法的日内和日间精密度分别为1.2％～9.1％和2.0％～9.7％;用所建立的方法测定了650个孕妇尿液样品,并统计分析了其地区差异,加标回收率为85.0％～104％.所建立的方法快速灵敏,适合尿液样品的批量分析.     

同位素稀释-液相色谱-电感耦合等离子质谱(ICP-MS)法测定大米中的甲基汞

目前国标方法GB 5009.17—2021测量样品中甲基汞(含量≤0.1 mg/kg)的精密度为20%、定量限为0.02 mg/kg,对于定量限以下的样品检测存在困难;为了能精确地测量国家食品安全检测领域关注的甲基汞污染物,通过在样品中加入同位素稀释剂后以GB 5009.17—2021国标方法进行样品前处理,以液相色谱分离出汞形态,用ICP-MS检测同位素比值,考虑质量歧视效应后以同位素稀释质谱法定量,建立了同位素稀释-液相色谱-电感耦合等离子质谱法测定大米样品中甲基汞含量的方法。当样品中甲基汞含量在0.01~0.03 mg/kg时,方法的精密度为0.3%~22.8%,不确定度U为0.002~0.004 mg/kg,k=2。以鱼肉中总汞与甲基汞成分分析标准物质(GBW10029)作为质控样,测定得到三种大米样品中甲基汞含量(以Hg计)分别为(8±2)、(24±3)、(19±4) ng/g,经过不确定度评估后表明方法的准确度较高;质控样(GBW10029)甲基汞的证书值(以Hg计)为 (0.84±0.03) mg/kg,而测量结果为(0.83±0.08) mg/kg,对质控样的测量结果说明该方法可靠;同位素稀释法将浓度的测量转换成同位素的丰度比的测量,可避免前处理过程带来的误差,同位素稀释与质谱结合可用于大米中甲基汞的高精度分析。     

电感耦合等离子体质谱法测定碳化硼中的硼同位素丰度

以碳酸钙为熔剂高温分解,硝酸浸取、硫酸沉淀的方法处理碳化硼样品,稀释后直接进行多接收电感耦合等离子体质谱分析,对碳化硼中的硼同位素丰度进行测定。扫描电镜分析结果表明,碳化硼颗粒形状不规则,尺寸小于50μm。利用建立的方法处理样品,可实现碳化硼样品的完全溶解,回收率接近100%。对样品中10B丰度进行分析,相对标准偏差为0.023%~0.035%(n=6),测量结果与参考值在不确定度范围内保持一致,证明实验方法可行。所建立的碳化硼样品测量方法样品处理步骤简便,分析速度快,测量精度高,可作为碳化硼中硼同位素丰度的常规分析方法。     

一种快速同位素稀释定量方法及其在示踪方面的应用

同位素稀释法定量分析中,当待测样品中某一目标同位素的丰度被示踪剂影响而不能保持天然丰度时,需要测量样品中各同位素的丰度比。在待测样品量或测量时间有限时,常规同位素稀释法的应用受到局限。为了降低样品消耗量、简化测量步骤、减小记忆效应影响、提高测量效率,本研究建立了一种可省略待测样品丰度比测量环节的快速同位素稀释定量方法。基于物质的量守恒原理,通过关联的运算,得到待测样品后,只需进行一次添加同位素稀释剂后混合样品的丰度比测量即可完成目标同位素的定量分析。以天然丰度Xe标准气体作为模拟样品,6次测量值与标称值的相对偏差均小于1%,相对标准偏差(RSD)为0.4%,与使用常规同位素稀释法得到的测量结果完全相符。此外,以¹²⁸Xe作为示踪同位素,得到的示踪同位素扩散曲线符合气体在封闭空间的扩散规律。本方法适用于有3种或更多稳定同位素的元素,既保证了测量结果的准确性,又可缩短分析时间,减少样品消耗量。     

电感耦合等离子体质谱(ICP-MS)法测定土壤中的有效钼

准确快速测定土壤中的有效钼,是评价土壤肥力的重要指标,对指导作物生产有重大意义。本文采用草酸-草酸铵溶液浸提土壤样品,待测浸提液稀释5倍后通过电感耦合等离子体质谱法在氦气模式下测定土壤中有效钼的含量,建立了土壤中有效钼高灵敏度分析的检测方法。选择103Rh为内标元素,校正仪器在测定过程中引起的信号飘移。对两种前处理方式进行比较,确定了震荡30 min、放置过夜的浸提方法浸提效果更好且更利于大批量样品的分析。使用震荡30 min、放置过夜的浸提方法对5个土壤标准物质有效钼进行前处理,其测定值均在标准值范围内;分别在无气体模式和氦气模式下比较了浓度为0mg/L、1mg/L、2mg/L、5mg/L、10mg/L、50mg/L的Mn对5ug/L 95Mo测定浓度的影响,结果表明氦气模式下的动能歧视可有效去除95Mo测定过程中的多原子离子的干扰,氦气模式测定有效钼明显优于无气体模式;分别对待测溶液稀释5倍和未稀释的内标回收率趋势进行监测,发现未稀释的样品内标回收率随着测量样品数的增多呈下降趋势,而稀释5倍对基体干扰的消除有显著效果。对5个土壤样品分别重复测定6次,其RSD均小于4.1%;线性相关系数为1.0000;方法检出限为0.0012 mg/kg。综上,该方法测定土壤有效钼结果准确,重现性好,灵敏度高,且适合大批量样品的分析。     

植物样品中低水平铀同位素分析

建立了一种植物样品中痕量铀同位素(~(238)U、~(235)U和~(234)U)的分析方法。通过高温灰化去除植物样品中有机质,采用混合酸消解样品灰分,应用UTEVA萃取色谱分离和纯化铀。化学分离过程中铀的回收率达94%,对Na、K、Ca等基体和干扰元素的去除率超过99%。用高灵敏度ICP-MS/MS同时测定了3种天然铀同位素含量,对~(238)U、~(235)U、~(234)U的检出限分别为3.05、0.34和0.04 pg/g,其中对~(238)U和~(235)U的检出限比文献报道值低1个数量级。对小麦粉标准参考物质中~(238)U的分析结果与参考值吻合,表明本分析方法可靠。将本方法应用于中国西安地区植物样品中铀同位素的分析,结果表明,该地区植物中铀含量和铀同位素比值处于天然水平,未发现人为铀污染。这是中国植物样品中3种天然铀同位素水平的首次调查。     

亲水作用色谱-串联质谱测定尿液中尼古丁和可替宁

建立了测定人尿液中尼古丁和可替宁含量的亲水作用色谱-串联质谱(HILIC-MS/MS)方法。尿样加入尼古丁-d4和可替宁-d3同位素内标后,用水稀释10倍,经过滤后的滤液由超高效液相色谱-串联质谱(UPLC-MS/MS)进行分离分析。采用ACQUITY UPLC~BEH HILIC色谱柱(50 mm×3.0 mm,1.7μm),以甲醇和体积分数为0.1%的氨水为流动相,流速为0.2 mL/min,在电喷雾电离源正离子模式下测定尿液中尼古丁和可替宁的含量,用标准曲线法定量。尼古丁和可替宁在1.0~1 000μg/L范围内线性关系良好,相关系数分别为0.994 9和0.995 8;检出限分别为0.082μg/L和0.077μg/L;定量限分别为0.27μg/L和0.26μg/L;加标回收率分别为90.4%~103.5%和93.0%~104.6%;相对标准偏差分别为4.80%~6.21%和4.22%~7.15%。应用所建立的方法测定了200份尿样,结果表明,吸烟人群尿中尼古丁含量为26.68~854.30μg/L,可替宁含量为36.66~1 191.18μg/L(n=86,M_(nicotine)=76.00μg/L,M_(nicotine)=83.52μg/L,M为中位数);非吸烟人群尿中尼古丁含量为5.08~69.66μg/L,可替宁含量为3.16~28.21μg/L(n=114,Mnicotine=7.53μg/L,M_(nicotine)=3.79μg/L)。该方法快速灵敏,操作简单,适用于尿样中尼古丁和可替宁的批量测定,能满足烟草暴露评价的需要。     

电感耦合等离子体质谱法测定土壤中痕量铀

建立电感耦合等离子体质谱法测定土壤样品中痕量铀含量的方法。采用硝酸、氢氟酸、高氯酸混合酸消解样品后,以铼为内标溶液校正基体干扰,用电感耦合等离子体质谱仪测定土壤中的痕量铀含量。实验结果表明,铀的质量浓度在0~20 ng/m L范围内与信号强度呈线性关系,相关系数r=0.999 9,方法检出限为0.006μg/g,测定结果的相对标准偏差小于5%(n=6),加标回收率在96%~103%之间。用该方法与标准方法对同一样品进行测定,两种方法测定结果一致。该方法准确可靠,满足土壤样品中痕量铀含量的测定要求。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.