Measurements of <Superscript>210</Superscript>Po and <Superscript>210</Superscript>Pb in total diet samples: Estimate of dietary intakes of <Superscript>210</Superscript>Po and <Superscript>210</Superscript>Pb for Japanese

To estimate the dietary intakes of ²¹⁰Pb and ²¹⁰Po for the Japanese adults and their annual effective doses, ²¹⁰Pb and ²¹⁰Po were measured for 240 daily diet samples collected at two locations of Ishikawa Prefecture in Japan over three years by duplicate portion studies. No appreciable differences in intake rates of ²¹⁰Pb and ²¹⁰Po and their ²¹⁰Po/²¹⁰Pb ratios were seen among the years in each district, and between the two districts. The intake rates evaluated using 240 diet samples were 0.20 Bq/d/p for ²¹⁰Pb and 0.61 Bq/d/p for ²¹⁰Po as a median, respectively. Annual effective doses of ²¹⁰Pb and ²¹⁰Po for Japanese adults were estimated to be 0.050 and 0.053 mSv/y, respectively.     

Distribution of <Superscript>210</Superscript>Po and <Superscript>210</Superscript>Pb in riverine environs of coastal Karnataka

The concentrations of ²¹⁰Po and ²¹⁰Pb have been measured in soil, sediment and rock samples collected from major rivers of coastal Karnataka, viz. Kali, Sharavathi and Netravathi. The activity of ²¹⁰Po and ²¹⁰Pb in the samples were separated by radiochemical methods and the activity was counted using ZnS(Ag) alpha-counter. The activity ratio of ²¹⁰Po and ²¹⁰Pb and the dependence of organic matter content on the activity of these radionuclides were studied.     

Improvements on the method for determining of <Superscript>210</Superscript>Pb and <Superscript>210</Superscript>Po in lead

An improved method is proposed to determine the content of ²¹⁰Pb in lead using ²¹⁰Po measured by alpha-ray spectrometry. This improved method, which is based on radiochemical separation by DDTC–toluene extraction, employs EDTA and citrate as masking reagents for the lead ions. To selectively extract polonium from an alkaline solution, the pH dependency was examined using a liquid scintillation counting method. And pH 9 was chosen as an extraction condition. Then ²¹⁰Po was electrodeposited on a stainless steel disk, and the chemical recovery was followed by ²⁰⁹Po tracer. The effectiveness of the new method was validated by the agreement with the analytical results from five samples as determined by gamma-ray spectrometry.     

Disequilibrium of dissolved <Superscript>234</Superscript>U/<Superscript>238</Superscript>U and <Superscript>210</Superscript>Po/<Superscript>210</Superscript>Pb in Greek rivers

For the first time, a radiological study for the dissolved ²³⁸U, ²³⁴U, ²¹⁰Pb and ²¹⁰Po was held in major Greek rivers across the country. ²³⁴U/²³⁸U activity ratios are above one in all samples and ²¹⁰Po/²¹⁰Pb activity ratios are respectively below the unit indicating the disequilibrium in the samples. Quite satisfactory correlations were observed among ²³⁴U and ²³⁸U as well as among ²¹⁰Po and ²¹⁰Pb values. Uranium isotopes were separated by ion exchange and electroplated on stainless steel plates. ²¹⁰Po was spontaneously deposited on nickel plates, while ²¹⁰Pb was indirectly determined through the ingrowth of ²¹⁰Po. The sources were measured by a-spectrometry.     

Atmospheric deposition fluxes of <Superscript>7</Superscript>Be, <Superscript>210</Superscript>Pb and <Superscript>210</Superscript>Po at Xiamen,China

The atmospheric deposition fluxes of ⁷Be, ²¹⁰Pb and ²¹⁰Po at Xiamen were measured. The samples were collected from March 2004 to April 2005 and the sampling period was one month. The ⁷Be and ²¹⁰Pb activity were measured using HPGe γ-spectrometer after concentration using Fe(OH)₃ co-precipitation method. The ²¹⁰Po was counted with an α-spectrometer after the sample was digested and spontaneous plated onto a silver planchet. At Xiamen, the atmospheric deposition fluxes of ⁷Be varied between 0.11 and 2.93 Bq·m⁻²·d⁻¹ and the average was 1.64 Bq·m⁻²·d⁻¹; ²¹⁰Pb fluxes varied between 0.04 and 0.85 Bq·m⁻²·d⁻¹, and the average was 0.51 Bq·m⁻²·d⁻¹; ²¹⁰Po fluxes varied between 0.002 and 0.133 Bq·m⁻²·d⁻¹, and the average was 0.061 Bq·m⁻²·d⁻¹. There were positive correlations between the deposition fluxes of ⁷Be, ²¹⁰Pb or ²¹⁰Po and the amount of precipitation. The residence time of aerosols varied between 6.0 and 54.0 days with a mean of 27.1 days, which were calculated by ²¹⁰Po/²¹⁰Pb fluxes ratios.     

Distributions of <Superscript>210</Superscript>Po and <Superscript>210</Superscript>Pb radioactivity in the intermediate layer of the northwestern North Pacific

The distributions of ²¹⁰Po and ²¹⁰Pb in the intermediate layer (400–2000 m) of the northwestern North Pacific were determined to elucidate the export flux of particulate matter. ²¹⁰Po generally showed depletion relative to ²¹⁰Pb in the intermediate layer, suggesting that ²¹⁰Po was scavenged by particles. Because the removal rate constants of ²¹⁰Po in the western region were higher than those in the eastern region and this trend coincided with that of the particle fluxes in the surface layer, the export production in the surface layer was assumed to influence the particle flux in the intermediate layer of the northwestern North Pacific.     

A biomonitoring study: <Superscript>210</Superscript>Po and heavy metals in mussels

In various samples of Mytilus galloprovincialis, ²¹⁰Po was determined by alpha-spectrometry while Mn, Fe, Ni, Cu, Zn, Cd, Sn, Hg and Pb by energy dispersive, polarised X-ray fluorescence spectrometry (EDPXRF). The mussels of different sizes were taken from 7 sites in the central Adriatic Sea along the Marche coastal region during the four seasons of the year. ²¹⁰Po activity concentration ranged between 57 and 343 Bq·kg⁻¹ dry weight. The concentration ranges of heavy metals (μg·g⁻¹ dry weight) were as follows: Mn: 72.9–83.1; Fe: 45.1–754; Ni: 1.3–7.6; Cu: 17.9–156; Zn: 60.9–189; Cd: 0.6–1.0; Sn: 0.6–3.9; Hg always <0.5; Pb: 2.0–9.0. The data obtained depend upon the site and the period of the sampling and they are also compared with those obtained by other authors for the same organism in the Mediterranean and other Italian seas.     

Quantification of measurement uncertainty in the sequential determination of <Superscript>210</Superscript>Pb and <Superscript>210</Superscript>Po by liquid scintillation counting and alpha-particle spectrometry

Methodologies for the quantification of measurement uncertainties associated with the determination of ²¹⁰Pb- and ²¹⁰Po-specific activities by liquid scintillation counting (LSC) and alpha-particle spectrometry are presented, and are demonstrated using the soil reference material IAEA-326. Major contributors to the combined uncertainty associated with the measurement result of ²¹⁰Pb were the uncertainties of net count rates in the ²¹⁰Pb energy region of the sample spectrum and in the ²¹⁰Bi energy region of the blank spectrum. The predominant sources of uncertainty in the measurement of ²¹⁰Po were the uncertainties of net count rates in the regions of interest of ²⁰⁹Po and ²¹⁰Po. The relative standard uncertainty of ²¹⁰Po exponentially increases with the time interval between the sampling date and the separation date of Po, and this effect is strongly dependent on the ²¹⁰Po/²¹⁰Pb activity ratio. When the specific activity of ²¹⁰Pb is much higher than that of ²¹⁰Po in the sample, the relative standard uncertainty of the ²¹⁰Po determination increases significantly within a short time interval between the sampling date (or reference date) and the separation date of Po in samples.     

Contamination problems from glass beaker inner surface in low level <Superscript>210</Superscript>Po analysis

It was found that heating of diluted nitric or hydrochloric acids in many years stored glass beakers can result in mBq quantities of ²¹⁰Po leached from beaker walls to the solution. In the case of freshly bought beakers acid leaching of ²¹⁰Po was not observed. We suppose that acid leachable ²¹⁰Po in old beakers is mainly due to implantation of radon progenies (from air) into superficial layers of glass beaker walls.     

Dependence of <Superscript>210</Superscript>Po activity on organic matter in the reverine environs of coastal Kerala

This paper deals with the distribution of ²¹⁰Po in the river bank soil samples of three major rivers namely Bharathapuzha, Periyar and Kallada river of Kerala. The dependence of ²¹⁰Po activity on organic matter content in the samples was also studied. The soil samples were collected and analyzed for ²¹⁰Po radionuclide using standard radiochemical analytical method. Activity of ²¹⁰Po increases with increase in organic matter content in samples. Along the Bharathapuzha river bank the ²¹⁰Po activity ranges from 2.96 to 12.48 Bq kg⁻¹ with mean 5.62 Bq kg⁻¹. The organic matter percentage in the samples ranges from 0.4 to 2.8 and a good correlation with correlation coefficient 0.9 was found between activity and organic matter percentage. In the Periyar river environs ²¹⁰Po activity ranges from 3.47 to 13.39 Bq kg⁻¹ with mean value 9.27 Bq kg⁻¹. Organic matter percentage in these samples ranges from 1.20 to 4.10 and the correlation coefficient between ²¹⁰Po activity and organic matter percentage was found to be 0.8 In the Kallada river bank soil samples ²¹⁰Po activity ranges from 4.46 to 6.45 Bq kg⁻¹. The organic matter percentage ranges from 1.4 to 3. The correlation coefficient between ²¹⁰Po activity and organic matter percentage in the samples was found to be 0.9.     

Sequential radioanalytical method for the determination of U and Th isotopes, <Superscript>226</Superscript>Ra and <Superscript>210</Superscript>Po using alpha spectrometry in samples of the Brazilian phosphate industry

The phosphate rocks used for the production of phosphate fertilizers present in their composition radionuclides of the U and Th series. During the chemical attack, the radionuclides are distributed to final products and phosphogypsum. A sequential radiochemical procedure was implemented to determine the content of radionuclides alpha emitters in samples of fertilizers and phosphogypsum produced in Brazil. The results obtained show that the levels of radioactivity present in the fertilizers are of the same order of magnitude on those found in the phosphogypsum, reaching values up to 1158 and 457 Bq kg⁻¹, for the U and Th series, respectively.     

Field measurement of the <Superscript>218</Superscript>Po, <Superscript>214</Superscript>Pb and <Superscript>214</Superscript>Bi concentrations in typical indoor and outdoor environments in Beijing

The activity concentrations of ²¹⁸Po, ²¹⁴Pb and ²¹⁴Bi [i.e. C(²¹⁸Po), C(²¹⁴Pb), and C(²¹⁴Bi)] and the calculated concentration ratios [i.e. 1:C(²¹⁴Pb)/C(²¹⁸Po):C(²¹⁴Bi)/C(²¹⁸Po)] are necessary for assessing radon and its progenies exposure. In this study, a measurement method of radon progenies concentrations with both high sensitivity and low uncertainty, was developed based on the Kerr method. The field measurement results of radon progeny concentrations and calculated concentration ratios in both typical indoor and outdoor environments in Beijing, China, were reported. The effects of air exchange rate on concentration ratios of radon progenies in indoor environments were discussed.     

Mixing of atmospheric <Superscript>210</Superscript>Pb and <Superscript>7</Superscript>Be and <Superscript>137</Superscript>Cs and <Superscript>90</Superscript>Sr fission products in four characteristic soil types

Depth distribution of atmospheric ²¹⁰Pb and ⁷Be and ⁹⁰Sr and ¹³⁷Cs fission products was measured in two types of aeolian soils (desert dust and volcanic ash), irrigated paddy soil and strongly acidic soil. The depth dependence of ²¹⁰Pb, ⁷Be and ¹³⁷Cs show that these radionuclides have been diffused as solid soil particles in surface soil layers. In aeolian soil layers, about 50% of ⁹⁰Sr were diffused in surface soil layer and the remaining 50% had penetrated to deeper layers. The half of the fission particles containing ⁹⁰Sr were shown to have decomposed over the past 35 years.     

Method validation of a procedure for determination of <Superscript>210</Superscript>Po in water using DDTC solvent extraction and Sr resin

For the determination of ²¹⁰Po in water samples, two alternative procedures (a) DDTC solvent extraction and (b) extraction chromatography using Sr Resin were selected and then validated in terms of trueness, repeatability and reproducibility with a tap water spiked with a known amount of ²¹⁰Po. In this work the optimization conditions for the auto-deposition of Po for source preparation were also studied.     

Determination of potassium traces in foodstuffs by natural <Superscript>40</Superscript>K radiation

Summary After the Chernobyl accident in April 1986, Mexico imported from one European country a shipment of 28,000 tons of milk powder contaminated with the fission product ¹³⁷Cs. Since then, the local authorities of Public Health have established as a compulsory condition to obtain through gamma-spectroscopy a certificate of no radioactive contamination either to imported or exported foodstuffs. But at the same time, the absence of long-lived, gamma-emitters fission products is certified, it is also possible to find the concentration of the important trace element K in foodstuffs, by the peak of 1461 keV from ⁴⁰K, invariably present in the gamma-spectra. Taking advantage of the fact that it does not require any previous manipulation of the sample, this paper describes the general procedure in milk powder or any other foodstuff.     

Evaluation of food emergency response laboratories’ capability for <Superscript>210</Superscript>Po analysis using proficiency test material with verifiable traceability

Measurement capability and data comparability are essential for emergency response when analytical data from cooperative laboratories are used for risk assessment and post incident decision making. In this study, the current capability of food emergency response laboratories for the analysis of ²¹⁰Po in water was evaluated using a proficiency test scheme in compliance with ISO-43 and ILAC G13 guidelines, which comprises a test sample preparation and verification protocol and an insightful statistical data evaluation. The results of performance evaluations on relative bias, value trueness, precision, false positive detection, minimum detection limit, and limit of quantification, are presented.     

<Superscript>210</Superscript>Pb and <Superscript>137</Superscript>Cs dating of sediments from Zigetang Lake,Tibetan Plateau

Zigetang Lake located in the central Tibetan Plateau was selected for the purpose of understanding of recent sedimentation rates. Based on ¹³⁷Cs dating marker, the sediment rate was 0.077 cm·yr⁻¹. The sedimentation rate was calculated to be 0.071 cm·yr⁻¹ and 0.029 g·cm⁻²·yr⁻¹ on the basis of ²¹⁰Pb CIC model. ²¹⁰Pb CRS model was also used for understanding of recent sedimentation change. The sediment accumulation rates for the CRS model ranged from 0.022 to 0.038 g·cm⁻²·yr⁻¹ with an irregular high value of 0.12 g·cm⁻²·yr⁻¹ around 1932 at Zigetang Lake core in the past eighty years.     

Vertical inventories and fluxes of <Superscript>210</Superscript>Pb, <Superscript>228</Superscript>Ra and <Superscript>226</Superscript>Ra at southern South China Sea and Malacca Straits

Inventories and fluxes of ²¹⁰Pb, ²²⁸Ra and ²²⁶Ra were determined in sediment cores collected at nine stations covering of the southern South China Sea and Malacca Straits with the thickness of water column between 42 and 83 m depth. The inventories of ²¹⁰Pb, ²²⁸Ra and ²²⁶Ra were calculated range from 0.15–2.55 Bq cm⁻², 0.05–0.40 Bq cm⁻² and 6.83–83.63 Bq cm⁻², meanwhile the fluxes ranged from 0.005–0.079 Bq cm⁻² yr⁻¹, 0.009–0.048 Bq cm⁻² yr⁻¹ and 0.003–0.037 Bq cm⁻² yr⁻¹, respectively. The results show that the highest inventories and fluxes for ²¹⁰Pb, ²²⁸Ra and ²²⁶Ra were found at station WC 01 and EC 05. Because there are additional sources of ²¹⁰Pb, ²²⁸Ra and ²²⁶Ra, where water transport will brings more dissolved isotopes, influence of the transportation and deposition of suspended particles, fast rate of regeneration and greater production of those radionuclides and others.