5‐Nitro‐2‐nitromethyl‐2H‐1,2,3,4‐tetrazole

The mol­ecule of the title compound, C₂H₂N₆O₄, consists of three planar fragments, namely a tetrazole ring, a nitro­methyl group and a nitro group. The nitro group and the tetrazole cycle are arranged in the same plane, but the planar nitro­methyl group is located nearly orthogonal to this plane. The mol­ecules are packed in the crystal via van der Waals interactions.     

Nitration Products of 5‐Amino‐1H‐tetrazole and Methyl‐5‐amino‐1H‐tetrazoles – Structures and Properties of Promising Energetic Materials

The nitration of 5‐amino‐1H‐tetrazole ( 1 ), 5‐amino‐1‐methyl‐1H‐tetrazole ( 3 ), and 5‐amino‐2‐methyl‐2H‐tetrazole ( 4 ) with HNO₃ (100%) was undertaken, and the corresponding products 5‐(nitrimino)‐1H‐tetrazole ( 2 ), 1‐methyl‐5‐(nitrimino)‐1H‐tetrazole ( 5 ), and 2‐methyl‐5‐(nitramino)‐2H‐tetrazole ( 6 ) were characterized comprehensively using vibrational (IR and Raman) spectroscopy, multinuclear (¹H, ¹³C, ¹⁴N, and ¹⁵N) NMR spectroscopy, mass spectrometry, and elemental analysis. The molecular structures in the crystalline state were determined by single‐crystal X‐ray diffraction. The thermodynamic properties and thermal behavior were investigated by using differential scanning calorimetry (DSC), and the heats of formation were determined by bomb calorimetric measurements. Compounds 2, 5 , and 6 were all found to be endothermic compounds. The thermal decompositions were investigated by gas‐phase IR spectroscopy as well as DSC experiments. The heats of explosion, the detonation pressures, and velocities were calculated with the software EXPLO5, whereby the calculated values are similar to those of common explosives such as TNT and RDX. In addition, the sensitivities were tested by BAM methods (drophammer and friction) and correlated to the calculated electrostatic potentials. The explosion performance of 5 was investigated by Koenen steel sleeve test, whereby a higher explosion power compared to RDX was reached. Finally, the long‐term stabilities at higher temperatures were tested by thermal safety calorimetry (FlexyTSC). X‐Ray crystallography of monoclinic 2 and 6 , and orthorhombic 5 was performed.     

2‐Methyl‐1,4,5‐triphenyl‐1H‐imidazole

In 2‐methyl‐1,4,5‐tri­phenyl‐1H‐imidazole, C₂₂H₁₈N₂, the three substituent phenyl groups are not delocalized with the imidazole moiety; the dihedral angles these phenyl groups form with the imidazole ring are in the range 25.90 (5)–63.49 (6)°.     

Iron Salts in the Catalyzed Synthesis of 5‐Substituted 1H‐Tetrazoles

Clicking iron : Cheap and environmentally friendly [Fe(OAc)₂] is used for the catalysis of cycloadditions between aryl nitriles and trimethylsilyl azide to prepare substituted 1H‐tetrazoles in good yield (see scheme).

     

Selective Synthesis of 2‐Aryl‐1‐benzylated‐1H‐benzimidazoles

An efficient and simple procedure was developed for the green synthesis of various 2‐aryl‐1‐ben‐zylated‐1H‐benzimidazoles in high yields by condensation of o‐phenylenediamine with aldehydes with P₂O₅/SiO₂ as catalyst under solvent‐free and ambient conditions.     

7‐Nitro‐1H‐indazole,an inhibitor of nitric oxide synthase

The crystal structure of 7‐nitro‐1H‐indazole, C₇H₅N₃O₂, an inhibitor of nitric oxide synthase, shows the existence of an intramolecular hydrogen bond between an O atom of the nitro group and the NH group of the indazole ring. The crystal packing consists of intermolecular hydrogen bonding and indazole?indazole interactions.     

5‐Methyl‐2‐thiouracil

The molecular structure of the title compound, also known as 2‐thio­thymine [systematic name: 2,3‐di­hydro‐5‐methyl‐2‐thioxopyrimidin‐4(1H)‐one], C₅H₆N₂OS, is similar to that of thymine, with only small changes in the ring structure, apart from a significant difference at the substitution site [S=C = 1.674 (1) Å]. The mol­ecules are connected by hydrogen bonds, with N—H?O = 2.755 (2) Å and N—H?S = 3.352 (1) Å. The hydrogen‐bond network is different from that in thymine, since it involves all the donor and acceptor atoms.     

Unexpected Reaction Course of 3‐Amino‐5‐aryl‐1H‐pyrazoles with Dialkyl Dicyanofumarates

On treatment of 3‐amino‐5‐aryl‐1H‐pyrazoles 1 with dialkyl dicyanofumarates (=(E)‐but‐2‐enedioates) 4 in boiling 1,2‐dichloroethane, two competitive reactions occurred leading to 3‐aryl‐5‐cyano‐6,7‐dihydro‐6‐oxo‐1H‐pyrazolo[3,4‐b]pyridine‐4‐carboxylates 10 and 7‐amino‐2‐arylpyrazolo[1,5‐a]pyrimidine‐5,6‐dicarboxylates 11 . In DMF at room temperature, as well as at 100°, only compounds 10 were isolated. The formation of the major products of type 10 was rationalized via Michael addition of 1 as a C(4)‐nucleophile onto 4 , followed by HCN elimination and lactamization. On the other hand, the minor products 11 result from a Michael addition of 1 onto 4 via the NH₂ group, and subsequent HCN elimination and cyclization. The structures of the products have been established by X‐ray crystallography.     

Photocyclodimerization of 5‐Methyl‐2H‐pyran‐3(6H)‐one

The structures of the main products resulting from photocyclodimerization of the title compound 2 and of other 3‐methyl‐substituted ‘oxacyclohex‐2‐en‐1‐ones’ (=dihydropyranones) were determined by X‐ray crystallography. In connection, the ¹³C‐NMR chemical shifts of the cyclobutane C‐atoms of these dimers allow a clear differentiation between head‐to‐head and head‐to‐tail regioisomers, all structurally related to those of isophorone ( 1 ).     

1‐Methyl‐1H‐imidazo[4,5‐f]quinolin‐6‐ium chloride monohydrate

The title compound, C₁₁H₁₀N₃⁺·Cl^?·H₂O, belongs to the N1‐methyl‐substituted imidazo­[4,5‐f]­quinoline family, in which the heterocyclic ring is protonated at the pyridine rather than at the imidazole N atom. The mol­ecule as a whole is almost exactly planar. The molecular structure has been compared with that of the 2‐amino analogue described in the literature, and it was found that the extra amino group of the latter is involved in conjugation with the adjacent double bond, i.e. the conjugation does not extend over the entire heterocyclic system. The cation of the title compound forms a strong hydrogen bond with the Cl^? anion and the anions are interconnected by the water solvent mol­ecule.     

Nitrogen‐Rich Energetic Monoanionic Salts of 3,4‐Bis(1 H‐5‐tetrazolyl)furoxan

3,4‐Bis(1H‐5‐tetrazolyl)furoxan (H₂BTF, 2 ) and its monoanionic salts that contain nitrogen‐rich cations were readily synthesized and fully characterized by multinuclear NMR (¹H, ¹³C) and IR spectroscopy, differential scanning calorimetry (DSC), and elemental analyses. Hydrazinium ( 3 ) and 4‐amino‐1,2,4‐triazolium ( 7 ) salts crystallized in the monoclinic space group P2(1)/n and have calculated densities of 1.820 and 1.764 g cm^?3, respectively. The densities of the energetic salts range between 1.63 and 1.79 g cm^?3, as measured by a gas pycnometer. Detonation pressures and detonation velocities were calculated to be 23.1–32.5 GPa and 7740–8790 m s^?1, respectively.     

Synthesis and Characterization of Novel 1‐Methyl‐3‐(4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazole Derivatives

A series of novel 1‐methyl‐3‐(4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazoles was synthesized in three steps from 5‐(1‐methyl‐1H‐indazol‐3‐yl)‐4‐phenyl‐2H‐1,2,4‐triazole‐3(4H)‐thiones. 5‐(1‐Methyl‐1H‐indazol‐3‐yl)‐4‐phenyl‐2H‐1,2,4‐triazole‐3(4H)‐thiones were converted into 1‐methyl‐3‐(5‐(methylsulfonyl)‐4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazoles upon methylation followed by treatment with aq. KMnO₄. The reaction of 1‐methyl‐3‐(5‐(methylsulfonyl)‐4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazoles with Raney nickel resulted in desulphonylation to afford corresponding 1‐methyl‐3‐(4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazoles. All the new synthesized compounds were characterized by spectral techniques.     

Efficient Synthesis of 2‐Aryl‐1‐arylmethyl‐1H‐benzimidazoles in Ball Mill without Solvent

2‐Aryl‐1‐arylmethyl‐1H‐benzimidazoles were prepared in excellent yields by the condensation of o‐phenylenediamine with aldehydes under mechanically activated solvent‐free conditions in ball mill using FeCl₃·6H₂O as the catalyst.     

Metallorganische 5d6‐Übergangsmetallkomplexe von zwei 1‐Methyl‐(2‐alkylthiomethyl)‐1H‐benzimidazol‐Liganden: Strukturen und elektrochemische Oxidation

Organometallic 5d⁶ Transition Metal Complexes of 1‐Methyl‐(2‐alkylthiomethyl)‐1H‐benzimidazole Ligands: Structures and Electrochemical Oxidation The complexes [(mmb)Re(CO)₃Cl], [(mtb)Re(CO)₃Cl], [(mmb)OsCl(Cym)](PF₆) and [(Cym)OsCl(mtb)](PF₆) where Cym = p‐cymene, mmb = 1‐methyl‐(2‐methylthiomethyl)‐1H‐benzimidazole and mtb = 1‐methyl‐(2‐tert‐butylthiomethyl)‐1H‐benzimidazole were synthesized and, except for the latter, structurally characterized. In comparison with other late transition metal compounds of these N‐S chelate ligands the rhenium(I) systems exhibit a balanced coordination to both N and S donor atoms. Anodic one‐electron oxidation produces EPR‐silent rhenium(II) states whereas the osmium(III) species [(mmb)OsCl(Cym)]²⁺ could be identified via EPR and UV/VIS spectroelectrochemistry.     

Reactions of Imidoyl Isoselenocyanates with Aromatic 2‐Amino N‐Heterocycles and 1‐Methyl‐1H‐imidazole

The reaction of N‐phenylimidoyl isoselenocyanates 1 with 2‐amino‐1,3‐thiazoles 10 in acetone proceeded smoothly at room temperature to give 4H‐1,3‐thiazolo[3,2‐a] [1,3,5]triazine‐4‐selones 13 in fair yields (Scheme 2). Under the same conditions, 1 and 2‐amino‐3‐methylpyridine ( 11 ) underwent an addition reaction, followed by a spontaneous oxidation, to yield the 3H‐4λ⁴‐[1,2,4]selenadiazolo[1′,5′:1,5] [1,2,4]selenadiazolo[2,3‐a]pyridine 14 (Scheme 3). The structure of 14 was established by X‐ray crystallography (Fig. 1). Finally, the reaction of 1‐methyl‐1H‐imidazole ( 12 ) and 1 led to 3‐methyl‐1‐(N‐phenylbenzimidoyl)‐1H‐imidazolium selenocyanates 15 (Scheme 4). In all three cases, an initially formed selenourea derivative is proposed as an intermediate.     

Zwitterionic 5‐(1‐piperidiniomethyl)‐1H‐tetrazolide

The title compound, C₇H₁₃N₅, a tetrazole analogue of betaines, exists as a zwitterion, with the H atom of the tetrazole ring being transferred to the piperidine ring N atom. The tetrazole ring symmetry is close to C_2v, which suggests strong charge delocalization in the N—C—N fragment of the ring. There are classical hydrogen bonds in the structure which are responsible for the formation of two‐membered aggregates.     

Synthesis and Comprehensive Characterization of Hydrated Alkaline Earth Metal Salts of 5‐Amino‐1H‐tetrazole

Hydrated alkaline earth metal salts of 5‐amino‐1H‐tetrazole ( B ) were synthesized by reaction of B with a suitable metal hydroxide in water. All compounds were fully characterized by analytical (elemental analysis and mass spectrometry) and spectroscopic (IR, Raman, ¹H and ¹³C NMR) methods. Additionally, the crystal structures of the magnesium [ 1· 4H₂O: triclinic, P$\bar {1}$ , a = 5.940(1) Å, b = 7.326(1) Å,c = 7.383(1) Å, α = 106.10(1)°, β = 106.51(1)°, γ = 111.85(1)°, V = 258.0(1) ų], calcium [ 2· 6H₂O: monoclinic, P2₁/m, a = 6.904(1) Å,b = 6.828(1) Å, c = 10.952(2) Å, β = 94.50(2)°, V = 514.6(1) ų], and strontium [ 3· 6H₂O: orthorhombic, Cmcm, a = 6.987(1) Å, b = 28.394(2) Å, c = 7.007(1) Å, V = 1390.3(2) ų] were determined by low temperature X‐ray diffraction. Additionally, the (gas phase) structure of the 5‐amino‐1H‐tetrazole anion ([ B ]^–) was also studied by natural bond orbital (NBO) analysis [B3LYP/6‐31+G(d,p)]. Lastly, standard tests were used to determine the sensitivity towards impact, friction, and electrostatic discharge of the compounds and the thermal stability was assessed by differential scanning calorimetry (DSC) analysis.     

Synthesis and Biological Activity of 3‐Methyl‐1H‐pyrazole‐4‐carboxylic Ester Derivatives

In search of novel pyrazole derivatives with bioactivity, a series of 3‐methyl‐1H‐pyrazole‐4‐caboxylic: ester derivatives were synthesized via α‐oxoketene dithioacetals as starting material. The structures of all compounds prepared were confirmed by ^lH NMR, IR, MS and elemental analyses. Preliminary bioassays indicated that some compounds showed fungicidal activity against wheat rust, phoma asparagi and antiviral activity against TMV.