Poly(methyl vinyl ether‐alt‐maleic acid)‐Functionalized Porous Silicon Nanoparticles for Enhanced Stability and Cellular Internalization

Currently, developing a stable nanocarrier with high cellular internalization and low toxicity is a key bottleneck in nanomedicine. Here, we have developed a successful method to covalently conjugate poly(methyl vinyl ether‐co‐maleic acid) (PMVE‐MA) copolymer on the surface of (3‐aminopropyl)triethoxysilane‐functionalized thermally carbonized porous silicon nanoparticles (APSTCPSi NPs), forming a surface negatively charged nanovehicle with unique properties. This polymer conjugated NPs could modify surface smoothness, charge, and hydrophilicity of the developed NPs, leading to considerable improvement in the colloidal and plasma stabilities via enhanced suspensibility and charge repulsion. Furthermore, despite the surface negative charge of the polymer‐conjugated NPs, the cellular internalization was increased in both MDA‐MB‐231 and MCF‐7 breast cancer cells. These results provide a proof‐of‐concept evidence that such polymer‐based PSi nanocomposite can be extensively used as a promising candidate for intracellular drug delivery.

     

Interaction of water in polymers: Poly(ethylene‐co‐vinyl acetate) and poly(vinyl acetate)

We studied the interaction of water in poly(ethylene‐co‐vinyl acetate) of various vinyl acetate compositions and poly(vinyl acetate), on the basis of the infrared spectrum of the water dissolved therein. The spectrum shows a very sharp and distinct band at about 3690 cm^?1 (named as A), and less‐sharp two bands around 3640 (B) and 3550 cm^?1 (C), the A band being outstanding especially at a low vinyl acetate composition. As the vinyl acetate composition increases, the A band decreases in intensity relative to the C band, whereas the B band increases contrarily. Analysis of the spectral change has elucidated that one‐bonded water (of which one OH is hydrogen‐bonded to the C?O of an ester group and the other OH is free) and two‐bonded water (each OH of which is hydrogen‐bonded to one C?O) coexist in the copolymer and that two‐bonded water increases in relative population with increasing vinyl acetate composition. Dissolved water is entirely two‐bonded in poly(vinyl acetate), in which C?O groups are densely distributed in the matrix. We proved that dissolved water in polymers is hydrogen‐bonded through one or two OH groups to the possessed functional groups but does not cluster. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 777–785, 2005     

引发剂对聚醋酸乙烯酯微乳液聚合的影响

考察了3种引发体系[过硫酸铵一碳酸氢钠(Ⅰ1),偶氮二异丁腈(Ⅰ2),过氧化氢-抗坏血酸(Ⅰ3)]对聚醋酸乙烯酯微乳液聚合的影响.结果表明:Ⅰ2使微乳液聚合体系反应剧烈;Ⅰ3反应较为平稳;Ⅰ1的表现中等.Ⅰ1～Ⅰ3所制得的乳液分子量出现典型的双峰分布.在高分子量部分,Ⅰ3对应的聚合物分子量较高;在低分子量部分,Ⅰ1～ⅠI3差别不大;Ⅰ2对应的乳胶粒径较小,分布也较窄;Ⅰ3次之;Ⅰ1对应的乳胶粒径较大,分布也较宽.     

Effect of Pressure on the Miscibility of Polyethylene/Poly(ethylene‐alt‐propylene) Blends

Summary: Effect of density, and hence pressure, on the miscibility of a 50:50 mol/mol PE/PEP blend was studied using a coarse‐grained MC simulation approach on a high‐coordination lattice, with the conformations of the coarse‐grained chains constrained by the RIS model. Interchain pair correlation functions are used to assess the miscibility of the mixtures. Miscibility increases with increasing temperature over the range −50–150 °C. It is rather insensitive to pressure at high temperatures, but at −50 °C, the blend miscibility increases with decreasing pressure. The findings are consistent with the fact that the blend is an UCST blend and that the simulation temperatures used, except −50 °C, were considerably higher than the UCST of the blend. The pressure dependence of the blend miscibility observed near −50 °C is also in agreement with the experimental observation that the blend exhibits a negative volume change of mixing. The present work demonstrates that the coarse‐grained MC approach, when it is used with periodic boundary cells of different sizes filled with the same number of chains, is capable of capturing the pressure dependence of UCST blends. In addition, such a simulation also provides us with insights about the molecular origin of the observed pressure dependence of miscibility. In the present case, the segregation of PE and PEP chains at low temperatures and high pressure simply originates from the fact that fully extended segments of PE chains tend to cluster so that their intermolecular interactions can be maximized. As the temperature increases, there is a decrease in the probability of a trans state at a C C bond in PE, and therefore the attraction between the PE chains is reduced at higher temperatures, promoting miscibility and the UCST behavior.

Density (pressure) dependence of the 2^nd shell pair correlation function values for a 50/50 PE/PEP blend at −50 °C.     

Biodegradable Coumaric Acid‐Based Poly(anhydride‐ester) Synthesis and Subsequent Controlled Release

To overcome drug delivery issues associated with its short half‐life in vivo, p‐coumaric acid (pCA), a naturally occurring bioactive, has been chemically incorporated into a poly(anhydride‐ester) backbone through solution polymerization. Nuclear magnetic resonance and Fourier transform infrared spectroscopies indicated that pCA was successfully incorporated without noticeable alterations in structural integrity. The polymer's weight‐average molecular weight and thermal properties were determined, exhibiting a molecular weight of over 26 000 Da and a glass transition temperature of 57 °C. In addition, in vitro hydrolytic release studies demonstrated pCA release over 30 d with maintained antioxidant activity, demonstrating the polymer's potential as a controlled release system.

     

Grafting reactions of vinyl acetate onto poly[(vinyl alcohol)-co-(vinyl acetate)]

The grafting preference of vinyl acetate onto the methine carbon of poly(vinyl alcohol) (PVOH) versus the acetate group of poly(vinyl acetate) (PVAc) was determined as part of an attempt to prepare novel branched PVOH from partially hydrolyzed PVAc. The results showed long chain grafting on the acetate groups of the PVAc units rather than the methine carbons of the PVOH or PVAc units. Decreasing the monomer or initiator concentration decreased the molecular weight of the graft copolymer formed. Of the initiators studied, ammonium persulfate gave the largest increase in copolymer molecular weight. Both hydrolysis and reacetylation combined with gel permeation chromatography (GPC) and ¹³C-NMR of the fully hydrolyzed material were used to estimate the number and location of grafts. © 1996 John Wiley & Sons, Inc.     

Design and Synthesis of Fast‐Degrading Poly(anhydride‐esters)

Fast‐degrading, salicylate‐based poly(anhydride‐esters) were designed to degrade and release the active component, salicylic acid (SA), within 1 week. The polymer degradation was enhanced by using shorter or oxygen‐containing aliphatic chains. A copolymer of diglycolic acid was also made with a salicylate‐based diacid for comparison of polymer properties, including SA release. Both methods resulted in polyanhydrides with molecular weights ranging from 14 500 to 27 800 Da and displayed glass transition temperatures near physiological conditions, namely 33–40 °C. The homo‐ and copolymers completely degraded within one week releasing the chemically incorporated SA.

     

Synthesis of Poly(vinyl acetate) Nanogels by Xanthate‐Mediated Radical Crosslinking Copolymerization

Poly(vinyl acetate) (PVAc) nanogels are synthesized by a radical crosslinking copolymerization (RCC) in solution of vinyl acetate and divinyl adipate (DVA) or 2,4,6‐tris(allyloxy)‐1,3,5‐triazine (TAT) as the crosslinker, in the presence of a xanthate as a reversible chain transfer agent. Higher concentrations of crosslinker and lower concentrations of xanthate produce PVAc nanogels of higher molar masses, for a given concentration of xanthate and for a fixed concentration of crosslinker, respectively. The xanthate end‐groups allow for the synthesis of ‘second generation’ nanogels through a subsequent RCC from precursors. The chemical cleavage of the crosslinks yields individual poly(vinyl alcohol) chains, which attests that the length of the constitutive chains is controlled by the xanthate.

     

Poly(amidoamine) Conjugates Containing Doxorubicin Bound via an Acid‐Sensitive Linker

Poly(amidoamine)s with amino pendant groups were prepared by hydrogen‐transfer polyaddition of primary and secondary amines to bis‐acrylamines. Dansyl cadaverine (DC) doxorubicin (Dox) were bound to the polymers via a cis‐aconityl spacer to give conjugates containing 3 µg of DC per mg of polymer and 28 to 35 µg of Dox per mg of polymer. Release of DC and Dox at physiological and acidic pH varied from 0 to 35% over 48 h and was pH dependent. Although the ISA1Dox conjugate (IC₅₀ = 6 µg Dox · mL^?1) presented similar toxicity as the parent polymer without Dox, ISA23Dox showed increased toxicity (IC₅₀ = 10 µg Dox · mL^?1). These results suggest that ISA23Dox is able to release biologically active Dox in vitro and that this conjugate might be suitable for further development.

     

Effect of maleic anhydride‐grafted polytetrafluoroethylene on the tensile and tribological properties of blending polytetrafluoroethylene with polyamide‐6

Blending polytetrafluoroethylene (PTFE) to polyamide‐6 (PA6) with and without maleic anhydride‐grafted polytetrafluoroethylene (PTFE‐g‐MA) was produced in a corotating twin screw extruder, where PTFE acts as the polymer matrix and PA6 as the dispersed phase. The effect of PTFE‐g‐MA on the tensile properties and tribological propertiesof PTFE/PA6 polymer blends is studied. Results show that the structural stability and morphology of the blends were greatly improved by PTFE‐g‐PA6 grafted copolymers, which were formed by the in situ reaction of anhydride groups with the amino end groups of PA6 during reactive extrusion forming an imidic linkage. The presence of PTFE‐g‐PA6 in the PTFE continuous phase improves the interfacial adhesion, as a result of the creation of an interphase that was formed by the interaction between the formed PTFE‐g‐PA6 copolymer in situ and both phases. Compared with thePTFE/PA6 without PTFE‐g‐MA, the PTFE/PA6 with PTFE‐g‐MAhad the lowest friction coefficient and wear under given applied load and reciprocating sliding frequency. The interfacial compatibility of the composite prevented the rubbing‐off of PA6, accordingly improved the friction and wear properties of the composite. Copyright © 2009 John Wiley & Sons, Ltd.     

Colloidal Properties of Aqueous Poly(vinyl acetate)–Borate Dispersions with Short‐Chain Glycol Ethers

We report the influence of adding five short‐chain glycol ethers (SCGEs) on the structure, stability, and viscoelastic properties of aqueous dispersions of partially hydrolyzed poly(vinyl acetate) and borax. The properties of these gel‐like materials have been investigated as a function of the structure of the added SCGE both below and above the critical aggregation (or micellar) concentrations using ¹¹B and ¹³C NMR, rheology, and small‐angle neutron scattering. The results indicate that the SCGE aggregation behavior is not affected by incorporation into the gel‐like network. However, changes in the viscoelasticity and structural properties of the dispersions were detected that can be correlated to the nature of the solvent system. Also, the ability of these materials to clean an unvarnished acrylic paint surface coated with synthetic soil has been evaluated using colorimetery, and the surface of the dispersion after cleaning was visualized with scanning electron microscopy.     

P(VA-co-DBM)/PVA乳胶IPN阻尼材料的合成及动态力学性能

用种子乳液聚合法合成了聚（醋酸乙烯酯－co-马来酸二丁酯）／聚醋酸乙烯酯乳胶互穿聚合物网络阻尼材料,动态力学谱结果表明,该阻尼材料在较宽的温域具有很高的阻尼因子。     

聚醋酸乙烯酯的光引发可控合成——介绍一个高分子化学综合实验

本实验开展了醋酸乙烯酯的可逆加成-断裂链转移自由基聚合(RAFT),分别运用偶氮二异丁腈(AIBN)引发和可见光引发两种方式进行了聚合反应,运用核磁共振和凝胶色谱等多种手段对所得聚合物结构进行了表征与分析。通过比较AIBN引发与光引发所获得聚合物端基结构的异同,加深了学生对RAFT聚合方法原理的理解。同时,运用该方法实现了聚合物两端端基结构的高度功能化,深入体会聚合物合成设计概念。本综合实验教学不仅通过对比法加深了学生对实验原理和专业知识的理解,提升了学生创新研究能力,而且训练了学生的实验操作技能、大型仪器使用能力和结果分析能力,提升了综合素质。     

Redox-Initiated Grafting of Acrylic Monomers onto Poly(vinyl Alcohol)

Loss of capacity of magnetic micro ion-exchange resins has been suggested to be caused by cleavage of unstable linkages formed during the graft polymerization reaction. The nature of the grafting process was investigated by using a series of model compounds having the same structural features as the glutaraldehyde-crosslinked poly(vinyl alcohol) core matrix. These compounds were then subjected to hydrogen peroxide oxidation, followed by the addition of monomer in the presence of iron(II). The identity and extent of peroxidation of the intermediate compounds was determined. In each of the peroxidation reactions the tertiary acetal hydrogen was oxidized to a hydroperoxy derivative. Some of these derivatives were able to dimerize to form peroxy compounds. The reactions occurred rapidly at room temperature when an acetal compound was shaken with hydrogen peroxide. Good yields could be obtained by precipitation of the sodium salts of the hydroperoxides. The hydroperoxy derivatives were shown to initiate polymerization of methyl acrylate, acrylic acid, and acrylamide when in the presence of iron(II).     

Synthesis of Poly(vinyl acetate)-block-poly(dimethylsiloxane)-block-poly(vinyl acetate) Copolymers by Iodine Transfer Photopolymerization in Miniemulsion

Summary: Iodine transfer polymerization of vinyl acetate in aqueous miniemulsion, initiated by UV radiation in the presence of an α,ω-diiodo-poly(dimethylsiloxane) macrophotoiniferter has been performed. The formation of a triblock copolymer latex PVAc-b-PDMS-b-PVAc has been evidenced by ¹H-NMR and size exclusion chromatography. The size of the PDMS and PVAc blocks were modulated thus opening the way to a wide range of copolymers with different properties. A detailed study of the reaction mechanism showed the importance of the aqueous dispersed medium to achieve a controlled polymerization.     

Solid‐Phase Synthesis of (Poly)phosphorylated Nucleosides and Conjugates

Succinyl‐cycloSal‐phosphate triesters of ribo‐ and 2′‐deoxyribonucleosides were attached to aminomethyl polystyrene as an insoluble solid support and reacted with phosphate‐containing nucleophiles yielding nucleoside di‐ and triphosphates, nucleoside diphosphate sugars, and dinucleoside polyphosphates in high purity after cleavage from the solid support. Here, reactive cycloSal‐phosphate triesters were used as immobilized reagents that led to a generally applicable method for the efficient synthesis of phosphorylated biomolecules and phosphate‐bridged bioconjugates.     

New Poly(propylene glycol)‐ and Poly(ethylene glycol)‐Based Polymer Gelators with L‐Lysine

Summary: New polymer gelators consisting of poly(propylene glycol) or poly(ethylene glycol) and L ‐lysine‐based low‐molecular‐weight gelators have been developed. These polymer gelators were synthesized according to a simple procedure with high reaction yield, and formed organogels in many organic solvents. The organogelation mechanism was proposed from the transmission electron microscopy and FTIR spectroscopy studies.

Structures of the polymer gelators synthesized here.     

Effect of Nanoclay on the Phase Separation Behavior of Poly（methyl methacrylate）/Poly（vinyl acetate） Binary Polymer Blends

The effect of nanoclay on the phase-separation behavior of poly（methyl methacrylate）/poly（vinyl acetate）（PMMA/PVAc） blends has been mainly investigated by small-angle laser light scattering. It is found that the effect of clay on the thermodynamics and kinetics of phase-separation for PMMA/PVAc blends seems inconsistent. The kinetics phaseseparation rate decreases, while the thermodynamics parameters, cloud points Tc and delay time tD of isothermal phaseseparation also decrease, and the variation amplitude depends on the matrix composition. The affinity of clay to PMMA results in the composition difference between the border layer and the polymer matrix and further causes the concentration fluctuation at the early stage of phase separation to reduce Tc and tD. On the other hand, the decrease of phase-separation rate is caused by the mechanical barrier effect of clay on the macromolecular diffusion of blend matrix. Hence, such seemingly counterintuitive results on the thermodynamics and kinetics of phase-separation are attributed to different dominant factors.