对苯二胺缩对苯二甲醛席夫碱及其配合物的制备和电化学性能

以对苯二胺和对苯二甲醛为原料缩合制备出对苯二胺缩对苯二甲醛席夫碱聚合物（PT）,研究了采用不同物质的量之比的单体所制备的聚合物的电化学性能。利用席夫碱聚合物中N原子上的孤对电子与不同金属离子配位形成席夫碱配位聚合物（PT-M）,并对所形成聚合物的电化学性能进行了研究。采用X射线衍射（XRD）、红外（IR）、热重-差示扫描量热法（TG-DSC）、扫描电子显微镜（SEM）和能谱（EDS）对产物进行了表征,PT-M的XRD峰强度相比于PT明显降低,表明金属离子配位进入分子链骨架中引起的空间位阻减少了分子链排列的有序性。采用循环伏安、恒电流充放电和交流阻抗评价了所制备的配位聚合物材料的电化学性能。研究发现,聚席夫碱铝配合物（PT-Al）表现出较优的电化学性能,在0.5 A·g^-1的电流密度下其电容值为649.6 F·g^-1,并且具有较好的循环稳定性,在8 A·g^-1的电流密度下循环1 000次后仍有80.9%的电容保持率。     

Calculation of chemical and phase equilibria via simulated annealing

We present a new class of techniques for the solution of the chemical and phase equilibria problem for reacting species in a closed system. The minimisation of the Gibbs free energy for all the species in the system is conducted using the technique of simulated annealing (SA). The SA objective function incorporates non‐ideal equations of state. This new approach is demonstrably able to solve multi‐species and multi‐phase LTCE problems in ideal‐gas solutions, ideal solutions and mixtures of ideal and non‐ideal solutions. This revised version was published online in July 2006 with corrections to the Cover Date.     

Partitioning technique procedure revisited II: Application to the Stark and Zeeman problems in light atoms

We show that the modified partitioning procedure can be applied to study the spherical and nonspherical Stark effect in the hydrogen atom and the spherical quadratic Zeeman effect in H^-, the helium atom and He‐like ions: Li⁺⁺, Be⁺⁺, etc. We present ground‐state energy values for γ (in a.u.) in the interval 0.001 ≤ λ ≤ 0.2 (a.u.= 5.142·10⁹ volts/cm) and for magnetic field γ (in a.u.) in the interval 0.1 ≤ γ ≤ 1.0 (a.u. = 2.353·10⁹ gauss). We compare our results to values available in the literature; they are, in general, better than those obtained by other methods. This revised version was published online in July 2006 with corrections to the Cover Date.     

Heat capacity at constant pressure and thermodynamic properties of phase transitions in PbMO<Subscript>3</Subscript> (<Emphasis Type="Italic">M</Emphasis>=Ti,Zr and Hf)

The heat capacity of PbMO₃ (M=Ti, Zr and Hf) at constant pressure was measured using a differential scanning calorimeter (DSC) from room temperature up to 870 K. Large anomalies were found in the heat capacity curves, corresponding to the ferroelectricparaelectric phase transition in PbTiO₃ (PT), the antiferroelectric-paraelectric phase transitions in PbZrO₃ (PZ) and PbHfO₃ (PH). The transition entropies were estimated as 7.3 J K⁻¹ mol⁻¹ (PT), 9.9 J K⁻¹ mol⁻¹ (PZ) and 9.3 J K⁻¹ mol⁻¹ (PH). These values of transition entropies are much larger than that of a typical displacive-type phase transition.     

Third-Order Nonlinear Optical Properties and Dielectric Properties of Pb-Complex Perovskite Thin Films Prepared by Sol-Gel Method

The third-order nonlinear optical properties of the sol-gel derived Pb(Fe_1/2Nb_1/2)O₃-PbTiO₃ (PFN-PT) thin films have been investigated by the THG method. The χ⁽³⁾ values of PFN-PT thin films increased from 3.2×10⁻¹² esu (PT) to 8.5×10⁻¹² esu (PFN) with increasing content of Fe³⁺ ions which possessed very high second-hyperpolarizability, ψ(Fe_2/3O). It was experimentally confirmed that complex oxides such as ABO₃-type perovskites consisting of large non-transition metal A-site cations and small transition metal B-site cations exhibited high χ⁽³⁾ as expected from Lines' model. It was also found that the χ⁽³⁾ values of complex oxides could be estimated from the second-hyperpolarizabilities of the constituent single oxides reported so far. Because of the large remanent polarization, PT thin films may exhibit the highest χ⁽³⁾ among the ferroelectric PFN-PT thin films studied in the present work. The maximum dielectric constant, ε, of 1990 at room temperature was obtained for 0.5PFN·0.5PT thin films, whose composition corresponds to so-called morphotropic phase boundary (MPB).     

Determination of plutonium isotope ratios at very low levels by ICP-MS using on-line electrochemically modulated separations

Electrochemically modulated separations (EMS) are shown to be a rapid and selective means of extracting and concentrating Pu from complex solutions prior to isotopic analysis by inductively coupled plasma mass spectrometry (ICP‐MS). This separation is performed in a flow injection mode, on‐line with the ICP‐MS. A three‐electrode, flow‐by electrochemical cell is used to accumulate Pu at an anodized glassy carbon electrode by redox conversion of Pu(III) to Pu (IV&VI). The entire process takes place in 2% (v/v) (0.46 M) HNO₃. No redox chemicals or acid concentration changes are required. Plutonium accumulation and release is redox dependent and controlled by the applied cell potential. Large transient volumetric concentration enhancements can be achieved. Based on more negative U(IV) potentials relative to Pu(IV), separation of Pu from uranium is efficient, thereby eliminating uranium hydride interferences. EMS‐ICP‐MS isotope ratio measurement performance will be presented for femtogram to attogram level plutonium isotope injections.     

19F NMR studies of the comparative electronegativity of the Ph3E groups (E=C, Si, Ge, Sn, or Pb) in Ph3E derivatives of tris(4-fluorophenyl)stannanethiol

Compounds (4-FC₆H₄)₃SnSEPh₃ (E=C, Si, Ge, Sn, or Pb) were synthesized or generated in solution. The data on the comparative electronegativity of the Ph₃E groups were obtained from the results of¹⁹F NMR spectroscopy. It was established that, except for E=C, the electronegativity changes in parallel with the absolute electronegativity of the central atom. Possible reasons for the deviation observed are discussed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1215‐1218, June, 1997.     

Structure and dielectric properties of 80%Pb(Zn1/3Nb2/3)O3–20%PbTiO3 thin films prepared by modified sol–gel process

80%Pb(Zn_1/3Nb_2/3)O₃–20%PbTiO₃ (PZN–PT) thin films have been prepared on Pt/Ti/SiO₂/Si substrates using a modified sol–gel method. In our method, niobium pentaoxide is used as a substitution instead of niobium ethoxide which is moisture-sensitivity and much more expensive. Microstructure and electrical properties of PZN–PT thin films have been investigated. X-ray diffraction analysis shows that proper annealing temperature of PZN–PT thin films is 600 °C. The PZN–PT thin films annealed at 600 °C are polycrystalline with (111)-preferential orientations. Field-emissiom scanning electron microscope analysis revealed PZN–PT thin films possess well-defined and crack-free microstructure. The thickness of thin films is 290 nm. The Pt/PZN–PT/Pt capacitors have been fabricated and it presents ferroelectric nature. The remanent polarization (Pr), spontaneous polarization (Ps), and the coercive electric field (Ec) are 8.71 μC/cm², 43.06 μC/cm², and 109 kV/cm at 1 MHz, respectively. The dielectric constant (ε_r) and the dissipation factor (tan δ) are about 500.3 and 0.1 at 1 kHz, respectively.     

Performance of commercial soil laboratories in a proficiency test program in Brazil

A soil proficiency test (PT) was administered to 50 participant laboratories in which two sets of samples, consisting of 20 yearly PT samples and 5 ‘blind’ samples in clients’ names were analyzed for pH, organic matter, total acidity, extractable calcium, magnesium, potassium and phosphorus by the laboratories. Our objective was to determine whether laboratories take extra care to analyze clients’ samples as they do with regular PT samples. The analytical data were evaluated essentially by the procedure described in the international harmonized protocol for proficiency testing of analytical chemistry laboratories. Performance of participant laboratories was assessed by z-scores and summary z-scores statistics involving sum of squared z-scores interpreted as chi-square ( c_n² ) \left( {\chi_{n}^{2} } \right) distribution for zero-centered z-scores with unit variance. From 8 750 determinations, outliers and stragglers accounted for less than 2% of the entire data. Over 93% of the data were satisfactory, whereas between 2 and 4% were either unsatisfactory or questionable in both the PT and ‘blind’ tests. On the basis of sum of squared z-scores interpreted from c_n² \chi_{n}^{2} distribution table, between 30 and 40% of the laboratories had more than 90% probability of having their measurement data within the robust mean and standard deviation for each soil parameter, while another 30–42% of the laboratories had less than 50% probability of having measurement data within the robust mean and standard deviation. Overall, 21 laboratories (42%) were ranked in Class A either in the PT or ‘blind’ tests out of which 12 of them (57%) retained this ranking in both tests. Fourteen laboratories (28%) were ranked in Class C in either the PT or ‘blind’ tests with only 5 of them (36%) consistently ranking in this class in both tests.     

Electrorheology and creep-recovery behavior of conducting polythiophene/poly(oxymethylene)-blend suspensions

Electrorheological properties and creep-recovery behavior of polythiophene/polyoxymethylene-blend having PT（50%）/POM（50%） composition were investigated.Particle size,conductivity and dielectric values were measured to be 24.77μm,3.85×10^-5 S·m^-1 and 26.75,respectively.Sedimentation ratio was measured to be 64%at the end of 16 days.The effects of dispersed particle volume fraction,external electric field strength,shear rate,frequency and temperature on ER properties and storage modulus of PT/POM-blend/silicone oil（SO） suspensions were examined.Enhancement were observed in the electric field viscosities of the suspensions and thus they were classified as a smart material.Shear thinning non-Newtonian viscoelastic behavior was determined for PT/POM-blend/SO system.Further,time-dependent deformation was examined by creep-recovery tests and recoverable viscoelastic deformation established.     

Does an exact local exchange potential exist?

In Kohn–Sham density functional theory, equations for occupied orbital functions of a model state are derived from the exact ground‐state energy functional of Hohenberg and Kohn. The exchange‐correlation potential in these exact Kohn–Sham equations is commonly assumed to be a local potential function rather than a more general linear operator. This assumption is tested and shown to fail for the exchange potential in a Hartree–Fock model for atoms, for which accurate solutions are known. This revised version was published online in July 2006 with corrections to the Cover Date.     

Combinatorics of combinatorial chemistry

The hot topic among medicinal chemists today is a novel technique for chemical synthesis in drug research called combinatorial chemistry, where usually a core structure and some building‐block molecules are given and all combinatorially possible combinations are produced. The resulting set of compounds (called a library) can afterwards be systematically screened for a desired biological activity. In this paper we discuss the applications of the mathematical discipline of combinatorics to this process, especially an algorithm for the exhaustive and redundancy‐free generation of a combinatorial library as well as equations for the enumeration of library sizes. This revised version was published online in July 2006 with corrections to the Cover Date.     

Hydrogen bonding and dissociation effects on the gas phase proton transfer reactions of ozone

Recently, the proton affinity (PA) of ozone was experimentally determined by Cacace and Speranza [Science (1994) 265: 208] using a bracketing technique that involved the proton transfer (PT) reactions: O₃H⁺+B⇒O₃+BH⁺; for different Br?nsted bases B. These authors showed that the simple collision model is not adequate to describe PT. We now present a theoretical model reflecting this bracketing procedure by explicitly introducing H-bonding complexing, dissociation and PT contributions, to discuss the kinetic model that assumes that PT occurs through one elementary step. The methods used include semiempirical density functional theory and ab initio Hartree-Fock methods. The procedure is gauged by using estimated PA of ozone obtained from deprotonation reactions including the Br?nsted bases BNH₃, H₂O, HOCl, SO₂, CH₃F and Kr. The PA-obtained range was from 145.3 to 160.3 kcal/mol, in fair agreement with the experimental value of 148.0±3 kcal/mol. The model seems to be fairly independent of the reference bases used to evaluate the PA. H-bonding effects appear to be a determining factor to explain collision efficiencies. Received: 5 August 1997 / Accepted: 25 September 1997     

Mass transfer to tubular electrodes. Part 2: CE process

The kinetic equations for an electrochemical process consisting of a homogeneous first‐order chemical reaction followed by electron transfer at the electrode surface are solved numerically, for linear sweep voltammetry under hydrodynamical conditions in a tubular electrode. Models for both the cases involving reversible as well as irreversible electrode charge transfer reaction are investigated. The influence on current–potential voltammograms of the experimentally measurable parameters like the potential scan rate, axial flow rate and chemical equilibrium parameter is examined and depicted graphically. This revised version was published online in July 2006 with corrections to the Cover Date.     

Interaction of Valdecoxib with β-cyclodextrin: Experimental and Molecular Modeling Studies

This study aimed to investigate the effect of β-cyclodextrin on aqueous solubility and dissolution rate of valdecoxib and also to get an insight of molecular interactions involved in formation of valdecoxib‐β-cyclodextrin inclusion complex. Phase solubility analysis indicated complex with possible stoichiometry of 1:1 and a stability constant of 234.01 M⁻¹. Thermodynamic studies in water indicated exothermic nature of inclusion complexation.␣Valdecoxib‐β-cyclodextrin complexes (1:1 M) were prepared by kneading method, solution method and␣freeze–drying method. The complex was characterized by differential scanning calorimetry (DSC), powder X-ray diffractometry (P-XRD), Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance␣(¹H-NMR) spectroscopy. Molecular modeling was used to help establish the mode of interaction of β-cyclodextrin with valdecoxib. ¹H-NMR analysis suggested that the unsubstituted phenyl ring of valdecoxib display favorable interaction with the hydrophobic cavity of β-cyclodextrin, which was confirmed by molecular dynamic simulations. An inclusion complex model has been established for explaining the observed enhancement of solubility of valdecoxib in water by β-cyclodextrin. Dissolution studies in water showed that the valdecoxib in freeze-dried complex dissolved much faster than the uncomplexed drug and physical mixture. This improvement in dissolution rate is attributed to the increased solubility and wettability due to encapsulation along with decreased crystallanity caused by complex formation, which is evident by DSC and P-XRD studies.     

Natural structural motifs that suppress peptide ion fragmentation after electron capture

Series of doubly and triply protonated diarginated peptide molecules with different number of glutamic acid (E) and asparagine (N) residues were analyzed under ECD conditions. ECD spectra of doubly-protonated peptides show a strong dependence on the number of E and N residues. Both the backbone cleavages and hydrogen radical (H^•) loss from the charge-reduced precursor ions ([M+2H]^+•) were suppressed as the number of E and N residues increases. A strong inhibition of the backbone cleavages and H^• loss from [M+2H]^+• was found for peptides with 6E residues (or 4E + 2N residues). The results obtained using these model peptides were re-confirmed by analyzing N-arginated Fibrinopeptide-B (i.e., REGVNDNEEGFFSAR). In contrast to the N-arginated peptide, ECD of the doubly-protonated Fibrinopeptide-B and its analogues show extensive backbone cleavages leading to series of c- and z-ions (∼80% sequence coverage). Based on these results, it is believed that peptide ions with all surplus protons sequestered in arginine-residues would show enhanced stability under ECD conditions as the number of acid-residue increases. The suppression of backbone cleavages and H^• loss from [M+2H]^+• are presumably attributed to the low reactivity of the charge-reduced precursor ions. One of the possible hypothesis is that diarginated E-rich peptides may contain hydrogen bonds between carbonyl oxygen of E side chains and backbone amide hydrogen. These hydrogen bonds would provide extra stabilization for [M+2H]^+•. This is the first demonstration of natural structural motifs in peptides that would inhibit the backbone fragmentation of the charge-reduced peptide ions under ECD conditions.     

A cellular automata model of the soluble state

Cellular automata models of solubilities in a solvent (water) have been dynamically synthesized. Rules relatingwater‐water, water‐solute, and solute‐solute relationships have been systematically varied in order to assess their influence on the emergent property of solubility. The results reveal the prominent influence of rules governing the probabilities of solute‐water joining and breaking. This influence manifests itself in significant changes in the emergent properties of relative solubility and solubility changes with water“temperature”. The study demonstrates the validity and potential value of cellular automata to model solution phenomena. This revised version was published online in July 2006 with corrections to the Cover Date.     

The convergence of energy expansions for molecules in electrostatic fields: A linear‐response coupled‐cluster study

The radii of convergence of power series expansions describing energy of a molecule in external electrostatic field are investigated usingD’Alembert ratio test, standard and generalized Cauchy–Hadamardcriteria, and Padé approximants. The corresponding coefficients at various field and field‐gradient components, representing multipole moments and (hyper)polarizabilities and including terms of tenth or even twentieth order, are determined using an ab initio linear responsecoupled‐cluster theory. Most calculations are performed for the HF molecule described by the basis set of double zeta quality, while the role of basis set is discussed by comparing the results with estimates of the radii of convergence obtained with the basis set of [5s3p2d/3s2p] quality. Emphasis is placed on the dependence of the interval of convergence of power series expansion describing energy of a molecule in applied electrostatic field on the nuclear geometry. The results might have important implications for various numerical methods used to calculate electrostatic molecular properties as functions of the internuclear geometry, including the finite‐field andfixed‐point‐charge approaches. This revised version was published online in July 2006 with corrections to the Cover Date.     

Kinetics and thermal stability of two peroxidase isozymes from Eupatorium odoratum

The Eupatorium odoratum leaf peroxidase exists as at least seven distinct isozymes (three cationic, three anionic, and one neutral). These isozymes were identified and separated by preparative iso-electric focusing. Thermal stability, including the activation enthalpy (ΔH ^*), free energy of inactivation (ΔG ^*) and activation entropy (ΔS ^*), and kinetic studies of two isozymes, one having a pI of 5.0 (E5) and another one having a pI of 7.0 (E7) with mol mass of 43 and 50 kD, respectively, were studied in detail. Of the molecular weight of E5 and E7, 25 and 32% correspond to the carbohydrate content of the isozymes. Optimal pH was in the acidic range of 3.6–3.8 for E5 and 3.8 for E7 with the oxidation of ABTS. E7 and E5 showed activation energy for inactivation, 194.8 and 145.4 kJ/mol, respectively. Both the isozymes showed distinct substrate specificity. The catalytic specificity constant for E5 and E7 were 112×10⁵ and 124×10⁵/s·M, respectively, when 2,2′-azino-bis-(3-ethylbenz-thiazoline-6 sulfonic acid) was used as the substrate. Maximum affinity (i.e., lowest K _m value) to H₂O₂ was shown by E5 and E7 along with Pyrogallol and was 0.02 and 0.05/s·M, respectively.     

Some kinetic aspects regarding the preparation of 1-(2-methoxyethoxy)cyclododeca-2,6,10-triene

The reaction of (E,E,E)-2,6,10-cyclododecatrien-1-yl acetate with 2-methoxyethanol catalyzed by Pd⁰(PPh₃)₄ was studied in tetrahydropyran solutions at 358K. The selectivity of the unsaturated ether at conversion of allyl acetate up to 68.1% ranged within 92.1–98.5%. The product composition was related to kinetic equations which can be used for reactor design.