A new method for quantitatively characterizing atmospheric oxidation capacity

Based on atmospheric chemical kinetics, the rate constant of overall pseudo-first order oxidation re-moval of gaseous pollutants (Kpor,T) is proposed to characterize the atmospheric oxidation capacity in troposphere. Being a quantitative parameter, Kpor,T can be used to address the issues related to at-mospheric oxidation capacity. By applying this method, the regional oxidation capacity of the atmos-phere in Pearl River Delta (PRD) is numerically simulated based on CBM-IV chemical mechanism. Re-sults show the significant spatio-temporal variation of the atmospheric oxidation capacity in PRD. It is found that OH initiated oxidations, heterogeneous oxidation of SO2, and photolysis of aldehydes are the three most important oxidation processes influencing the atmospheric oxidation capacity in PRD.     

Oxygenation of Fe(II) in the presence of citrate in aqueous solutions at pH 6.0-8.0 and 25 degrees C: interpretation from an Fe(II)/citrate speciation perspective

The kinetics of Fe(II) oxidation in the presence of various citrate concentrations have been investigated in aqueous solutions over the pH range 6.0-8.0 using colorimetry and speciation modeling. Oxidation of Fe(II) was interpreted and quantitatively modeled in terms of oxidation of various Fe(II)-citrate species. Using the model, it is possible to predict whether the presence of citrate would dominate the Fe(II) oxidation and thus enhance/retard the oxidation rate of Fe(II) and vice versa. The study also supports the presence of other Fe(II)-citrate species rather than just the monomeric species at circumneutral pH. At low pH and in a system where complexation of Fe(II) by citrate is dominant, oxidation of Fe(II) is controlled by the oxidation of both Fecit- and Fecit24-. As the pH increases, the oxidation of Fe(OH)cit25- becomes increasingly important and dominates the oxidation of Fe(II) at pH 8.0. Rate constants for the oxidation of all five suggested Fe(II)-citrate species have been estimated and may be used to predict the rate of Fe(II) oxidation at any combination of pH and citrate concentration.     

A reasonable explanation for the mechanism of photo-promoted chemoselective aerobic oxidation of alcohols using (ON)Ru(salen) complex as catalyst

The mechanism of aerobic oxidation of alcohols using (ON)Ru(salen) complex as catalyst under photo-irradiation was examined through studies of kinetics of the oxidation, kinetic isotope effect in the oxidation, and effect of the ligand structure on the chemoselectivity of the oxidation of primary and secondary alcohols. It was demonstrated that the aerobic oxidation includes an intramolecular hydrogen atom transfer process that is attributed to realization of efficient differentiation of primary and secondary alcohols in the oxidation.     

In situ time-resolved XAFS study on the structural transformation and phase separation of Pt3Sn and PtSn alloy nanoparticles on carbon in the oxidation process

The dynamic behavior and kinetics of the structural transformation of supported bimetallic nanoparticle catalysts with synergistic functions in the oxidation process are fundamental issues to understand their unique catalytic properties as well as to regulate the catalytic capability of alloy nanoparticles. The phase separation and structural transformation of Pt(3)Sn/C and PtSn/C catalysts during the oxidation process were characterized by in situ time-resolved energy-dispersive XAFS (DXAFS) and quick XAFS (QXAFS) techniques, which are element-selective spectroscopies, at the Pt L(III)-edge and the Sn K-edge. The time-resolved XAFS techniques provided the kinetics of the change in structures and oxidation states of the bimetallic nanoparticles on carbon surfaces. The kinetic parameters and mechanisms for the oxidation of the Pt(3)Sn/C and PtSn/C catalysts were determined by time-resolved XAFS techniques. The oxidation of Pt to PtO in Pt(3)Sn/C proceeded via two successive processes, while the oxidation of Sn to SnO(2) in Pt(3)Sn/C proceeded as a one step process. The rate constant for the fast Pt oxidation, which was completed in 3 s at 573 K, was the same as that for the Sn oxidation, and the following slow Pt oxidation rate was one fifth of that for the first Pt oxidation process. The rate constant and activation energy for the Sn oxidation in PtSn/C were similar to those for the Sn oxidation in Pt(3)Sn/C. In the PtSn/C, however, it was hard for Pt oxidation to PtO to proceed at 573 K, where Pt oxidation was strongly affected by the quantity of Sn in the alloy nanoparticles due to swift segregation of SnO(2) nanoparticles/layers on the Pt nanoparticles. The mechanisms for the phase separation and structure transformation in the Pt(3)Sn/C and PtSn/C catalysts are also discussed on the basis of the structural kinetics of the catalysts themselves determined by the in situ time-resolved DXAFS and QXAFS.     

A flotation related X-ray photoelectron spectroscopy study of the oxidation of galena surface

The initial steps of the oxidation of galena (PbS) surface with special attention to the oxidation in an aqueous environment were investigated by the X-ray photoelectron spectroscopy method (XPS). Galena monocrystals from two different sources were cleaved and exposed to either air or an aqueous environment. The results show that the presence of organic contamination at the galena surface may exert a dramatic effect on the course of its surface oxidation. In the case of aerial oxidation, the presence of impurities changes the reaction path, suppressing the oxidation of sulfide sulfur to sulfate like species selectively. In the case of aqueous oxidation, the presence of organic contamination at the surface (this contaminants are supposed to be mainly the carboxylic acids and their salts) inhibits the oxidation. Very little oxidation products were found on the galena surface contacted with aqueous solutions at the spontaneously established potential, in accordance with the congruent dissolution-oxidation mechanism.     

One-Pot Direct Oxidation of Primary Amines to Carboxylic Acids through Tandem ortho-Naphthoquinone-Catalyzed and TBHP-Promoted Oxidation Sequence

Biomimetic oxidation of primary amines to carboxylic acids has been developed where the copper-containing amine oxidase (CuAO)-like o-NQ-catalyzed aerobic oxidation was combined with the aldehyde dehydrogenase (ALDH)-like TBHP-mediated imine oxidation protocol. Notably, the current tandem oxidation strategy provides a new mechanistic insight into the imine intermediate and the seemingly simple TBHP-mediated oxidation pathways of imines. The developed metal-free amine oxidation protocol allows the use of molecular oxygen and TBHP, safe forms of oxidant that may appeal to the industrial application.     

Novel biomarkers of protein oxidation sites and degrees using horse cytochrome c as the target by mass spectrometry

Biomarkers held both incredible application and significant challenge in probing the oxidation mechanisms of proteins under oxidative stress. Here, mass spectrometry (MS) coupled with liquid chromatography (LC) was applied to establish a new pipeline to probe the oxidation sites and degrees of horse cytochrome c (HCC) with its oxidative products serving as the biomarkers. Samples of native and UV/H(2)O(2) oxidized HCCs were digested by trypsin and subjected to biomarker discovery using LC/MS and tandem mass spectrometry (MS/MS). Experiment results proved that the main oxidation sites were located at Cys(14), Cys(17), Met(65) and Met(80) residues in peptides C(14)AQC(heme)HTVEK(22), C(14)AQCHTVEK(22), E(60)ETLMEYLENPKK(73), M(80)IFAGIK(86) and M(80)IFAGIKK(87). Quantitative analysis on the oxidized peptides showed the oxidation degrees of target sites had positive correlations with extended oxidation dose and controlled by residues types and their accessibility to solvent molecules. Being able to provide plentiful information for the oxidation sites and oxidation degrees, the identified oxidized products were feasibility biomarkers for HCC oxidation, compared with the conventional protein carbonyl assay.     

钙钛矿型氧化物负载纳米金属催化剂结构的动态调变及其催化氧化CO反应性能

研究了钛酸钡和钛酸钙担载的Ag和Pt纳米催化剂的表面结构随氧化-还原处理过程的动态变化及其对CO完全氧化反应性能的影响.发现氧化物担载的Ag催化剂在氧化处理后其催化活性较还原处理的高; X射线衍射(XRD)和X射线光电子能谱(XPS)表征结果表明,氧化处理能够提高载体表面Ag颗粒的分散度,而还原处理导致Ag颗粒的聚集,从而降低了催化氧化CO反应的活性.氧化-还原处理改变了担载Ag纳米粒子的尺寸并影响其CO氧化反应活性.与此相反,氧化物担载的Pt催化剂在还原处理后所表现出的CO氧化反应活性较氧化处理的高; 对比研究发现,氧化和还原处理后Pt纳米粒子的尺寸基本相同,但是氧化处理的样品中Pt表面物种以氧化态为主,而还原处理后Pt表面物种主要为金属态.Pt纳米粒子表面化学状态随氧化-还原处理的调变是导致表面催化活性差异的主要原因.     

CO oxidation mechanism on CeO(2)-supported Au nanoparticles

Density functional theory was used to study the CO oxidation catalytic activity of CeO(2)-supported Au nanoparticles (NPs). Experimental observations on CeO(2) show that the surface of CeO(2) is enriched with oxygen vacancies. We compare CO oxidation by a Au(13) NP supported on stoichiometric CeO(2) (Au(13)@CeO(2)-STO) and partially reduced CeO(2) with three vacancies (Au(13)@CeO(2)-3VAC). The structure of the Au(13) NP was chosen to minimize structural rearrangement during CO oxidation. We suggest three CO oxidation mechanisms by Au(13)@CeO(2): CO oxidation by coadsorbed O(2), CO oxidation by a lattice oxygen in CeO(2), and CO oxidation by O(2) bound to a Au-Ce(3+) anchoring site. Oxygen vacancies are shown to open a new CO oxidation pathway by O(2) bound to a Au-Ce(3+) anchoring site. Our results provide a design strategy for CO oxidation on supported Au catalysts. We suggest lowering the vacancy formation energy of the supporting oxide, and using an easily reducible oxide to increase the concentration of reduced metal ions, which act as anchoring sites for O(2) molecules.     

不同直径碳纳米管的抗电化学氧化性

本文比较了由化学气相沉积法制备的不同直径(在100 nm以内)的多壁碳纳米管(CNT)的抗电化学氧化性.将CNT电极于1.2 V(vs.RHE)下电氧化120 h,记录氧化电流~时间变化曲线;X射线光电子能谱(XPS)分析氧化前后CNT的表面化学组成.结果表明,随着CNT直径的减小,其氧化电流降低,但其中以为10~20 nm的CNT电极氧化电流最小,表面氧的增量也最小,即被氧化的程度最低,抗电化学氧化性最强.根据不同直径CNT的缺陷位、不定型碳的丰度和碳原子的应力能,分析了其抗电化学氧化性差异的原因.     

Electroanalytical applications of cationic self-assembled monolayers: square-wave voltammetric determination of dopamine and ascorbate

Gold electrodes modified with cationic self-assembled monolayers (SAMs) of 2,2'-dithiobisethaneamine (CYST) and 6,6'-dithiobishexaneamine (DTH) were used for the simultaneous determination of dopamine (DA) and ascorbate (AA). The cationic SAM modified electrodes have several advantages over the bare electrode for the oxidation of AA. A very large (approximately 450 mV) decrease in the overpotential for the oxidation of AA when compared with the bare electrode has been observed at the cationic monolayer-modified electrode. The electrostatic interaction of negatively charged AA with the monolayer shift the oxidation peak potential of AA to less positive potential and enhances the peak current. On the other hand, the positively charged DA is repelled from the monolayer and the oxidation potential shifts to more positive potential when compared to the bare electrode. The electrochemical oxidation of AA at the mixed monolayer of CYST and diethyl disulfide (DEDS) supports the influence of cationic terminal group of the monolayer on the oxidation of AA. Since the oxidation of AA occurs well before the oxidation potential of DA is reached, the homogeneous catalytic oxidation of AA by the oxidized DA has been advantageously eliminated at the monolayer-modified electrode. The cationic self-assembled monolayers successfully detect DA in the presence of high concentration of AA. The sensitivity of the electrode modified with CYST monolayer was found to be 0.036 and 0.021 microA/microM towards AA and DA, respectively.     

流光放电等离子体液相氧化亚硫酸铵

在氨-硫铵法烟气脱硫中, 一个关键环节是将副产物的四价硫S(IV)氧化为六价硫S(VI). 采用可规模化的流光放电液相氧化技术, 通过交直流叠加(AC/DC)电源, 激发气体放电产生等离子体对氨法脱硫高浓度的亚硫酸铵进行氧化. 实验测量了该氧化过程与溶液浓度、放电功率密度、溶液pH值、温度以及传质效率因子等各种参数的关系. 研究表明, 在亚硫酸铵摩尔浓度为3 mol·L-1时, 可以获得有实用价值的反应速率, 摩尔能耗减低到50 Wh·mol-1以下, 显示出很好的应用前景.     

Thermal oxidation of isotactic polypropylene synthesized with a metallocene catalyst

The mechanism and kinetics of thermal oxidation of metallocene PP are investigated. It is shown that the rate of oxidation of the samples synthesized at a high temperature (40–70°C) is higher than that of the samples synthesized at a low temperature (20 and 30°C). The composition of oxidation products of PP samples; the kinetics of the accumulation of these products; and changes in structural, thermal, and thermophysical parameters during oxidation are analyzed in detail. Our data indicate that the oxidation of low-temperature samples and the oxidation of high-temperature samples obey different mechanisms. The oxidation of low-temperature samples corresponds to the radical-chain process, in which the intramolecular transfer of kinetic chains prevails. High-temperature samples are characterized by the intermolecular transfer of oxidation kinetic chains, which leads to the degradation of macromolecules. It is inferred that the rate and mechanism of thermal oxidation are determined by the microstructure of polymer chains.     

New view on the oxidation mechanisms of crude oil through combined thermal analysis methods

In the previous study, the oxidation behavior of four Chinese crude oils (Oil 1 to 4) in the presence and absence of rock cuttings was investigated by thermogravimetry/derivative thermogravimetry (TG/DTG) techniques and oxidation tube experiments. The present work investigates the thermal behavior of these oils by combining DTG–DTA method. First, we conducted comparative analysis about mass loss rate from DTG curves and endothermic/exothermic phenomenon from DTA curves attempting to clarify the endothermic or exothermic mechanism in crude oil low-temperature oxidation. Finally, we combined the thermal analysis method with low-temperature oil oxidation tube experiment in porous media to ascertain, whether the two methods are consistent in the aspect of low-temperature oxidation mechanism of crude oil by O₂ consumption rate and CO₂ generating rate (carbon bond stripping reaction rate). Results show that crude oils undergo an endothermic oxidation behavior during low-temperature oxidation stage, suggesting the decomposition of hydrocarbon components. Clay can play a catalytic effect on low-temperature oil oxidation. The results of DTG–DTA tests can also better reflect oil oxidation mechanism under real conditions.     

Density functional theory methods as powerful tools to elucidate amino acid oxidation mechanisms. A case study on methionine model peptide

The amino acid oxidation mechanism has been a research focus in recent years. Although various experimental techniques have been employed to address the problem, it is still a great challenge to identify the oxidation intermediates of amino acids. To explore the potential of theoretical methods in helping elucidating amino acid oxidation mechanisms, one-electron oxidation of a methionine model peptide (N-acetylmethionine amide) was investigated by density functional theory (DFT; including TD-DFT) calculations. The theoretical results not only testified the experimentally identified oxidation mechanisms of the peptide to a large extent but also revealed the contribution of protonated species to the peptide oxidation. All of these findings strongly suggest that DFT methodology has great potential in investigating amino acid oxidation mechanisms.     

氯离子存在下四苯基卟啉合锰的电化学和现场光谱电化学II. 氧化过程

本文研究了氯离子滴定过程中四苯基卟啉合锰氧化过程的常规循环伏安、薄层循环伏安及现场紫外-可见光谱电化学行为。发现在1摩尔比的Cl^-存在下, 四苯基卟啉合锰经历了Mn(III)/Mn(III)环阳离子自由基及进一步氧化为环两价阳离子的过程, 并伴随有异卟啉生成的后行化学反应, 当2摩尔比的Cl^-存在时, 反应机理转变为Mn(III)/Mn(IV), Mn(IV)/Mn(IV)环阳离子自由基并伴随有异卟啉生成反应的两个氧化步骤。提出了与这一滴定过程相关的氧化还原反应机理。     

Oxidation of glycated phosphatidylethanolamines: evidence of oxidation in glycated polar head identified by LC-MS/MS

Phosphatidylethanolamine glycation occurs in diabetic patients and was found to be related with oxidative stress and with diabetic complications. Glycated phosphatidylethanolamines seem to increase oxidation of other molecules; however, the reason why is not understood. In this work, we have studied the oxidation of glycated phosphatidylethanolamines (1-palmitoyl-2-linoleoyl-sn-glycero-3-phosphatidylethanolamine (PLPE) and 1,2-dipalmitoyl-sn-glycero-3-phosphatidylethanolamine (dPPE)) using a Fenton system. Liquid chromatography–electrospray ionization (ESI)–mass spectrometry and ESI–tandem mass spectrometry in both positive and negative modes were used for detecting and identifying the oxidation products. We were able to identify several oxidation products with oxidation in unsaturated sn-2 acyl chain of PLPE, as long- and short-chain products with main oxidation sites on C-7, C-8, C-9, and C-12 carbons. Other products were identified in both glycated PLPE and glycated dPPE, revealing that oxidation also occurs in the glycated polar head. This fact has not been reported before. These products may be generated from oxidation of glycated phosphatidylethanolamines (PE) as Schiff base, leading to short-chain product without the amine moiety, due to cleavage of glycated polar head and long-chain product with two keto groups linked to the glycated polar head or from glycated PE as Amadori product, short-chain products with –NHCHO and –NHCHOHCHO terminal in polar head. Oxidation of glycated phosphatidylethanolamines occurred more quickly than the oxidation of non-glycated phosphatidylethanolamines probably because of the existence of more oxidation sites derived from glycation of polar head group. Monitoring glycated polar head oxidation could be important to evaluate oxidative stress modifications that occur in diabetic patients.     

Studies on the role of oxidation states of the platinum surface in electrocatalytic oxidation of small primary alcohols

The role of the oxidation state of a platinum polycrystalline surface in the electrocatalytic oxidation of C₁ to C₄ primary alcohols has been studied by using electrochemical techniques, in situ FTIR spectroscopy and X-ray photoelectron spectroscopy. The results revealed that the oxidation state of the Pt surface plays a key role in the oxidation of primary alcohols, and demonstrated that the oxidation of C₁ to C₄ primary alcohols on a Pt electrode is controlled by the formation of surface oxides on the Pt electrode at different potentials. It was found that the dependence of the reaction process on the oxidation states of the platinum surface yielded similar features in the cyclic voltammogram for oxidation of different primary alcohols at a Pt electrode. According to the effects in the oxidation of primary alcohols, the surface oxides of platinum may be classified as active and poison species. The Pt surface oxides of higher oxidation states (Pt(OH)₃ and PtO₂) formed at potentials above 1.0 V (SCE) were identified as poison species, while other lower oxidation states of Pt surface oxides such as PtOH, Pt(OH)₂ and PtO may be identified as the possible active species for primary alcohol oxidation.     

Palladium oxidase catalysis: selective oxidation of organic chemicals by direct dioxygen-coupled turnover

Selective aerobic oxidation of organic molecules is a fundamental and practical challenge in modern chemistry. Effective solutions to this problem must overcome the intrinsic reactivity and selectivity challenges posed by the chemistry of molecular oxygen, and they must find application in diverse classes of oxidation reactions. Palladium oxidase catalysis combines the versatility of Pd(II)-mediated oxidation of organic substrates with dioxygen-coupled oxidation of the reduced palladium catalyst to enable a broad range of selective aerobic oxidation reactions. Recent developments revealed that cocatalysts (e.g. Cu(II), polyoxometalates, and benzoquinone) are not essential for efficient oxidation of Pd(0) by molecular oxygen. Oxidatively stable ligands play an important role in these reactions by minimizing catalyst decomposition, promoting the direct reaction between palladium and dioxygen, modulating organic substrate reactivity and permitting asymmetric catalysis.     

Catalytic selective oxidation or oxidative functionalization of methane and ethane to organic oxygenates

Selective oxidation or oxidative functionalization of methane and ethane by both homogeneous and heterogeneous catalysis is presented concerning: (1) selective oxidation of methane and ethane to organic oxygenates by hydrogen peroxide in a water medium in the presence of homogeneous osmium catalysts, (2) selective oxidation of methane to formaldehyde over highly dispersed iron and copper heterogeneous catalysts, (3) selective oxidation of ethane to acetaldehyde and formaldehyde over supported molybdenum cat...