Comparison of two sample preconcentration strategies for the sensitivity enhancement of flavonoids found in Chinese herbal medicine in micellar electrokinetic chromatography with UV detection

Two on-column preconcentration techniques named stacking with reverse migrating micelles (SRMM) and anion selective electrokinetic injection and a water plug-sweeping with reverse migrating micelles (ASIW-sweep-RMM) were used and compared for concentration and separation of flavonoids in Chinese herbs using reverse migration micellar electrokinetic chromatography (RM-MEKC). The optimal background electrolyte (BGE) used for separation and preconcentration was a solution composed of 20mM phosphoric acid (H(3)PO(4))-100mM sodium dodecyl sulfate (SDS)-20% (v/v) acetonitrile (ACN) buffer (pH 2.0), the applied voltage was -15kV. To achieve reasonable results of the two techniques, the conditions which affected preconcentration were examined. A comparison of used techniques with normal hydrodynamic injection (5s), concerning enhancement factors and limits of detection (LODs) was presented. Under the optimum stacking conditions, about 27-37- and 45-194-fold improvement in the detection sensitivity was obtained for SRMM and ASIW-sweep-RMM, respectively, compared to usual hydrodynamic sample injection (5s). The LODs (S/N=3) for SRMM and ASIW-sweep-RMM in terms of peak height, can reach down to 1.15 x 10(-2) microg/ml for hesperetin and 2.4 x 10(-3) microg/ml for nobiletin, respectively. Finally, the amounts of the six flavonoids in extract of Fructus aurantii Immaturus were successfully determined using ASIW-sweep-RMM. The six analytes were baseline separated with sample matrix under the optimum ASIW-sweep-RMM conditions and the experimental results showed that preconcentration was well achieved after the dilution of sample solutions.     

Fast CE for combinatorial catalysis

Two solvent-modified MEKC methods were developed for the quantitative analysis of heterocyclic amines synthesised using intramolecular ring closure via catalysed hydroamination. The first method was capable of resolving six of the amines (precursors and products) with a sample-to-sample injection time of 2 min employing a 20 mM borate buffer, pH 9.2 with 20 mM SDS and 5% v/v n-butanol (n-BuOH). A second low-pH method using 20 mM phosphate buffer, 100 mm SDS, 5% v/v n-BuOH and 20% v/v iso-propanol (i-PrOH) was able to resolve an additional pair of compounds with a sample-to-sample time of 3.5 min. Application of the first method to the analysis of a sample containing catalyst as well as amines placed directly in a 96-well plate showed excellent performance, with migration time and peak height and area reproducibility being less than 0.9 and 9.6%, respectively. The quantity of conversion by catalyst was calculated to be 68 +/- 7%, which was in excellent agreement with the 67 +/- 5% obtained by more conventional (1)H NMR experiments, with the added advantage that this method is also cheaper, quicker and more amendable to high-throughput screening of combinatorial libraries.     

Analysis of ecdysteroids by micellar electrokinetic chromatography with on-line preconcentration

In order to enhance the UV detection sensitivity, an application study of an on-line preconcentration technique for micellar electrokinetic chromatographic (MEKC) was carried out. The simultaneous determination of four test ecdysteroids, 20-hydroxyecdysone, ajugasterone C, polypodine B and ponasterone A has been investigated by using the normal stacking mode in MEKC with UV detection. The effects of anionic surfactant composition and concentration, the applied voltage, the pH buffer, the kind and the amount of organic solvent and the injection time on the analyte resolution were evaluated. The optimised conditions for the separation involved the use of a 50 mM borate as the running buffer containing 50 mM of a mixture of sodium dodecyl sulphate (SDS) and sodium cholate (SC) in the ratio of 1:1 together with a concentration of 10% (v/v) of 2-PrOH at pH 9.0. Hydrodynamic injection of 12 s at 50 mbar and separation voltage of 20 kV at temperature of 20 degrees C were employed. These conditions allowed a repeatability separation within 21 min. Concentration detection limit for the neutral analytes studied improve about an order of magnitude. The method was also applied to the determination of ecdysteroids in a real sample.     

Study of major flavonoids in crude Scutellariae Radix by micellar electrokinetic capillary chromatography

A method of micellar electrokinetic capillary electrophoresis for determining the six flavonoids in Scutellariae Radix (i.e., baicalin, baicalein, wogonin 7-O-glucuronide, wogonin, oroxylin A 7-O-glucuronide, and oroxylin A) has been developed. The buffer solution (pH 7.24) composed of 20 mM sodium dodecyl sulfate (SDS), 20 mM sodium dihydrogen phosphate, and 25 mM sodium borate was found to be the most suitable electrolyte for the separation. The contents of the six flavonoids in crude Scutellariae Radix could easily be determined within about 15 min. On-column UV (254 nm) monitoring allowed the quantitative determination of baicalin. The effects of pH, surfactant concentration, and applied voltage on the migration behavior of the solutes were studied.     

Determination of rutin and forsythin in fruit ofForsythia suspensa(Thunb.) Vahl by capillary electrophoresis-electrochemical detection

Summary Capillary electrophoresis-amperometric detection is evaluated for simultaneous determination of rutin and forsythin. The cyclic voltammogram, hydrodynamic voltammogram, effect of pH, buffer concentration and SDS, and percent organic modifier on separation and detection were studied. Conditions were optimized as follows: 1.2 V detection potential; separation at 12 kV; 5 s at 15 kV for sample injection time and sample injection voltage; mobile phase 20 mM boric acid buffer; pH 8.4, containing 40 mM SDS and 10% (v/v) acetontrile. The method gave low detection limit as 0.001 mg mL⁻¹ and 0.0005 mg mL⁻¹ (S/N=3), wide linear range 0.005–0.5 mg mL⁻¹ for rutin and forsythin, respectively. The relative standard deviations of peak current and migration time for 8 consecutive injections of the standard solution containing 0.1 mg mL⁻¹ each compound were 4.78%, 3.63% and 6.40%, 2.95% for rutin and forsythin, respectively. In addition, levels of the two compounds in traditional Chinese herbal drugs were easily determined.     

Separation of natural pyrethrum extracts using micellar electrokinetic chromatography

The separation of the six pyrethrin esters in a technical pyrethrum extract (Riedel-de-Ha?n, Cresent Chemical Co. Inc. Hauppauge, NY, USA) by micellar electrokinetic chromatography (MEKC) using both sodium dodecyl sulfate (SDS) and a polymerized surfactant as pseudo-stationary phases has been investigated and optimized. Parameters such as pH, SDS and polymerized sodium N-undecyl sulfate (poly-SUS) concentration, type and concentration of background electrolyte and organic modifier, as well as the acetonitrile/water ratio in the sample were studied to optimize the resolution, efficiency, and analysis time. An optimized separation of the six pyrethrin esters was achieved in 25 min with 25 mM Tris, buffered at pH 9, containing 30 mM SDS, 25% (v/v) acetonitrile, and an equal volume ratio of acetonitrile/water sample matrix at a voltage of 25 kV. The use of 0.5% (w/v) poly-SUS enhanced resolution of the pyrethrin esters and shortened the total analysis time from 25 to 20 min, compared to the SDS mediated separation. The optimized MEKC results are compared to the HPLC separation of these esters and show an improvement in efficiency and total analysis time.     

Optimization of the separation of phenolic compounds by micellar electrokinetic capillary chromatography

A group of phenolic compounds including phenolic aldehydes, acids and flavonoids are separated by micellar electrokinetic chromatography (MECC). The influence of buffer (concentration and pH), concentration of sodium dodecylsulphate (SDS) and applied voltage were studied. To increase the selectivity of the separation and the resolution of the solutes organic solvents are added to the separation buffer, the best results were obtained when methanol was used at lower percentages. An optimized buffer (150 mM boric acid (pH 8.5)-50 mM SDS-5% methanol) provides the optimum separation with regard to resolution and migration time. This method was applied to the determination of these compounds in wine samples with good results.     

Microemulsion electrokinetic chromatography for separation and analysis of curcuminoids in turmeric samples

Microemulsion EKC (MEEKC) was developed for quantitative analysis of curcuminoids, such as curcumin (C), demethoxycurcumin (D), and bis-demethoxycurcumin (B). MEEKC separation of curcuminoids was optimized, and a change in resolution was explained using a modified equation for resolution in MEEKC without electroosmosis. The suitable MEEKC conditions for separation of curcuminoids were obtained to be the microemulsion buffer containing 50 mM phosphate buffer at pH 2.5, 1.1% v/v n-octane as oil droplets, 180 mM SDS as surfactant, 890 mM 1-butanol as cosurfactant, and 25% v/v 2-propanol as organic cosolvent; applied voltage of -15 kV; and separation temperature 25 degrees C. Achieved baseline resolution of C:D and D:B was obtained with R(s) -2.4 and analysis time within 18 min. In addition, high accuracy and precision of the method were obtained. This MEEKC method was used for quantitative determination of individual curcuminoids in medicinal turmeric capsules and powdered turmeric used as coloring additive in food, with simple sample preparation such as solvent extraction, dilution, and filtration, and without cleaning up by SPE.     

Separation of cold medicine ingredients by capillary electrophoresis

This study demonstrates the separation of cold medicine ingredients (e.g., phenylpropanolamine, dextromethorphan, chlorpheniramine maleate, and paracetamol) by capillary zone electrophoresis and micellar electrokinetic chromatography. Factors affecting their separations were the buffer pH and the concentrations of buffer, surfactant and organic modifiers. Optimum results were obtained with a 10 mM sodium dihydrogen-phosphate-sodium tetraborate buffer containing 50 mM sodium dodecyl sulfate (SDS) and 5% methanol (MeOH), pH 9.0. The carrier electrolyte gave a baseline separation of phenylpropanolamine, dextromethorphan, chlorpheniramine maleate, and paracetamol with a resolution of 1.2, and the total migration time was 11.38 min.     

Separation and determination of lignans from seeds of Schisandra species by micellar electrokinetic capillary chromatography using ionic liquid as modifier

In this paper, a micellar electrokinetic chromatographic (MEKC) method using ionic liquid as modifier for the quantification of the active components of lignans found in the medicinal herbs Schisandra species was developed for the first time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds, the addition of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as BMIM-BF4 and SDS concentration, applied voltage, background electrolyte pH and concentration, were evaluated. Under the optimal conditions (5 mM borate-5 mM phosphate buffer in the presence of 20 mM SDS and 10 mM BMIM-BF4, pH 9.2, applied voltage 25 kV and detection at 254 nm), the method successfully applied to the determination of lignans in extracts of Schisandra chinensis (Turcz.) Baill. and Schisandra henryi C.B. Clarke in less than 13 min. The separation mechanism was also discussed.     

Simultaneous determination of catecholamines and amino acids by micellar electrokinetic chromatography with laser-induced fluorescence detection

A selective and sensitive method was developed for separation and simultaneous determination of catecholamines and amino acids by MEKC with LIF. Interestingly enough, such work has been firstly performed on catecholamines derivatized with 4-chloro-7-nitro-2,1,3-benzoxadiazole and the detailed derivatization mechanism was discussed. After derivatization at 60 degrees C for 20 min, NBD-labeled catecholamines and amino acids were separated in a buffer system containing 10 mM sodium tetraborate-Na2HPO4, 20 mM SDS, and 10% v/v ACN at pH 9.75. SDS micelles were employed to improve the fluorescence intensity of catecholamine derivatives efficiently. Under optimum conditions, two catecholamines and 11 amino acids were separated in a short 13 min analysis time and the RSDs for migration time and peak area were less than 0.60 and 6.50%, respectively. The method was successfully applied for the quantification of catecholamines and amino acids in Portulaca oleracea L., human urine sample, and mixed injection sample.     

Investigation and optimisation of the use of micellar electrokinetic chromatography for the analysis of six cardiovascular drugs

A micellar electrokinetic chromatography method was optimised for the separation of the six cardiovascular drugs atenolol, nicardipine, nifedipine, diltiazem, verapamil, and amlodipine by investigating the effects of pH, sodium dodecyl sulphate (SDS) concentration, selection and concentration of organic modifier. An electrophoresis buffer of 100 mM borate pH 8.1 containing 50 mM SDS and 15% (v/v) acetone was found to provide the optimum separation with respect to resolution and migration time.     

Optimization of separation and migration behavior of chloropyridines in micellar electrokinetic chromatography

The separation and migration behavior of pyridine and eight chloropyridines, including three monochloropyridines, four dichloropyridines, and 2,3,5-trichloropyridine were investigated by micellar electrokinetic chromatography using either sodium dodecyl sulfate (SDS) as an anionic surfactant or SDS-Brij 35 mixed micelles. Various parameters such as buffer pH, SDS concentration, Brij 35 concentration and methanol content that affect the separation were optimized. Complete separation of these chloropyridines was optimally achieved with a phosphate buffer containing SDS (30 mM) and methanol (10%, v/v) at pH 7.0. The resolution and selectivity of analytes could be considerably affected by the addition of methanol and/or Brij 35 to the background electrolyte. The migration order of these chloropyridines depends primarily on their hydrophobicity. However, electrostatic interactions may also play a significant role in the determination of the migration order of the positional isomers of chloropyridines.     

Electrophoretic behavior study and determination of some active components in Chinese medicinal preparations by capillary electrophoresis

The determination of icariin (IC), rhein (RH), chrysophanol (CH), physcion (PHY), glycyrrhetic acid (GE), and glycyrrhizic acid (GI), in traditional Chinese preparations, Anshen Bunao oral liquid and Maren pill, has been investigated by micellar electrokinetic capillary electrophoresis. With borate buffer (10 mM), SDS (20 mM) and acetonitrile (10%) as background electrolyte (pH 9.55), 20 kV applied voltage and 254 nm UV detection, the six active compounds were completely separated within 10 min. The effects of buffer pH, concentration of borate, SDS and modifier on electrophoretic behavior and separation are discussed. Regression equations revealed linear relationships (correlation coefficients: 0.9960-0.9999) between the peak-area of each component and the content. In addition, the levels of the six active compounds in two kinds of traditional Chinese medicinal preparations were easily determined with recoveries of from 94.7% to 106.4%.     

Determination of homologues of quaternary ammonium surfactants by capillary electrophoresis using indirect UV detection

This investigation describes the simultaneous separation of two major non-chromophoric quaternary ammonium surfactants, alkyltrimethyl- and dialkyldimethylammonium compounds (ATMACs and DADMACs, respectively), by capillary electrophoresis (CE) using indirect UV detection. The most effective separation conditions was 10 mM phosphate buffer with 57.5% tetrahydrofuran and 3 mM sodium dodecyl sulfate (SDS) at pH 4.3, and the sample hydrodynamic injection of up to 20 s at 1 psi (approximately 60 nl), and an applied voltage of 25 kV (1 psi = 6.9 kPa). Specially, the selection of an appropriate chromophore and an internal standard (I.S.) to improve the peak identification and quantitation was systematically investigated. Decylbenzyldimethyl ammonium chloride (C10-BDMA+C-) as a chromophore with 3 mM sodium dodecyl sulfate provided the best detectability for all homologues. The reproducibility of the migration time and quantitative analysis can be improved by using tetraoctyl ammonium ion as an internal standard, giving the relative standard deviation (R.S.D.) less than 0.8% for the relative migration times, and 2.5-5.5% for the relative peak areas. A good linearity of CE analysis was obtained in the range of 1.0-20 microg/ml with r2 values of above 0.999. The analysis of cationic surfactants in commercial products of hair conditioners and fabric softeners was also performed. Electrospray mass spectrometric method was applied to evaluate the CE method, and the compatible results were obtained.     

咖啡因及其9种类似物的胶束电动毛细管分析研究

 以十二烷基硫酸钠 (SDS)胶束为准固定相 ,考察了咖啡因及其 9种类似物在胶束电动毛细管 (MECC)分离模式下的分离行为。研究了运行缓冲液的 pH值、磷酸盐浓度、SDS浓度、甲醇体积分数、分离电压、分离温度等因素对这 10种化合物的迁移时间和分离效果的影响。结果发现 ,这些因素对上述 10种化合物的分离有显著的影响 ,尤以pH值为最。它不仅影响化合物的迁移时间和分离效率 ,还改变其出峰顺序 ,这与碱性条件下化合物仲胺基上氢的电离有关。优化后的分离条件 :运行缓冲液为 2 0mmol/L磷酸盐 2 0mmol/LSDS(pH 11 0 ) ,分离电压为2 5kV。     

Micellar electrokinetic capillary chromatography as an alternative method for the determination of ethinylestradiol and levo-norgestrel

A method for quantifying of ethinylestradiol (ETE) and levo-norgestrel (LEV) in pharmaceutical products by micellar electrokinetic chromatography (MEKC) is described. The separation was carried out at 25 degrees C and 25 kV, using a 20 mM borate buffer (pH 9.2), 15 mM sodium dodecylsulfate (SDS) in 30% acetonitrile/water (v/v). Under these conditions the analysis takes about 7 min. The method has been applied for quantifying both compounds in six different commercial contraceptives and the proposed method gave good results when compared with a reference liquid chromatographic (LC) method.     

Development and optimization of a method for the analysis of low-molecular-mass organic acids in plants by capillary electrophoresis with indirect UV detection

Capillary zone electrophoresis was developed to analyze low-molecular-mass organic acids including oxalic, tartaric, formic, malic, citric, succinic, glutaric, acetic and lactic acid. The influences of some crucial parameters such as buffer concentration, pH value, surfactant concentration and separation temperature, on electrophoretic separation were investigated. Under the conditions of 15 mM phthalate containing 0.6 mM tetradecyltrimethylammonium bromide as the run buffer (pH 5.6); separation voltage -15 kV (-263.2 V/cm) and temperature 25 degrees C, a satisfactory separation of nine organic acids was accomplished within 7 min. The detection limits (S/N=3) ranged from 0.008 to 0.08 microg/ml and the quantification limits ranged from 0.01 to 0.1 microg/ml for electrokinetic injection. The method was successfully applied to analyze organic acids in different parts of Var splendens (an edible vegetable in China). The recoveries of organic acids in real samples ranged from 88 to 121%.     

Analysis of ethambutol and methoxyphenamine by capillary electrophoresis with electrochemiluminescence detection

A capillary electrophoresis (CE) coupled with electrochemiluminescence (ECL) detection method for the analysis of ethambutol (EB) and methoxyphenamine (MP) has been investigated. Complete separation of EB and MP was achieved in 8 min using a background electrolyte of 20 mM sodium phosphate at pH 10.0 and a separation voltage of 9 kV. ECL detection was performed with an indium/tin oxide (ITO) working electrode biased at 1.4 V (versus a Pt wire reference) in a 200 mM sodium phosphate buffer (pH 8.0) containing 3.5 mM Ru(bpy)3(2+) (where bpy = 2,2'-bipyridyl). Linear correlation (r > or = 0.993) between ECL intensity and drug concentration was obtained in the range 2-50 ng/ml. The limits of detection (LODs) for EB and MP in water were 1.0 and 0.9 ng/ml, respectively. The relative standard deviation values on peak size (10 ng/ml level) and migration time for the two drugs were in the ranges 5-8 and 0.2-0.7% (n = 7), respectively. Applicability of the CE-ECL method to the analysis of human plasma spiked with EB and MP was examined. The LODs for EB and MP in plasma were 0.4 and 0.3 microg/ml, respectively.     

Efficient separation of tanshinones by polyvinylpyrrolidone‐stabilized graphene‐modified micellar electrokinetic chromatography

In this work, a PVP‐stabilized graphene was used in MEKC for the separation of tanshinones. Seven structurally similar tanshinones were studied, that is, tanshinone IIB, dihydrotanshinone I, tanshinone I, cryptotanshinone, 1,2‐dihydrotanshinone I, miltirone, and tanshinone IIA. To achieve optimal conditions, graphene concentration, sample solvent composition, SDS concentration, 2‐propanolconcentration, and buffer pH were investigated. At a separation voltage of 30 kV and a 41.5 cm effective length fused‐silica capillary, good resolution within 12 min was performed using 10 mM borate buffer (pH 9.3) containing 30 mM SDS, 10% v/v 2‐propanol and 6 μg/mL graphene. The method was validated in terms of linearity (r² > 0.9970), intra‐ and inter‐day precision were less than 3.56 and 4.83%, respectively. The proposed method was then successfully applied to Danshentong capsule, an herbal preparation from Salvia miltiorrhiza. Our results indicated the high separation efficiency of PVP‐stabilized graphene provided new opportunities for the analysis of complex samples.