Ketene reactions with the aminoxyl radical tempo: preparative, kinetic, and theoretical studies

Tetramethylpiperidinyloxy (TEMPO, TO*) reacts with ketenes RR(1)C=C=O generated by either Wolff rearrangement or by dehydrochlorination of acyl chlorides to give products resulting from addition of one TEMPO radical to the carbonyl carbon and a second to the resulting radical. Reactions of phenylvinylketenes 4b and 4f, phenylalkynylketene 4c, and the dienylketene AcOCMe=CHCH=CHCMe=C=O (11) occur with allylic or propargylic rearrangement. Even quite reactive ketenes were generated as rather long-lived species by photochemical Wolff rearrangement in isooctane solution, characterized by IR and UV, and used for kinetic studies. The rate constants of TEMPO addition to eight different ketenes have been measured and give a qualitative correlation of log k(2)(TEMPO) = 1.10 log k(H(2)O) -3.79 with the rate constants for hydration of the same ketenes. Calculations at the B3LYP/6-311G//B3LYP/6-311G level are used to elucidate the ring opening of substituted cyclobutenones leading to vinylketenes and of 2,4-cyclohexadienone (17) forming 1,3,5-hexatrien-1-one (18).     

Bis(ketenyl)benzenes: preparation,observation, and reaction with tetramethylpiperidin-1-yloxyl

1,2- and 1,3-Bis(ketenyl)benzenes formed by double dehydrochlorination and by double Wolff rearrangement, respectively, gave ketenyl IR absorption at 2115, and 2122, and 2116 cm^–1, respectively. Reaction of these bisketenes with the aminoxyl radical tetramethylpiperidin-1-yloxyl (TEMPO) gave the corresponding tetraadducts as mixtures of meso- and d,l-isomers. The kinetics of the reaction of 1,3-bis(ketenyl)benzene with TEMPO gave a rate constant comparable to that of the monoketene PhCH=C=O. The reactions proceed by the initial attack of TEMPO on the carbonyl carbon of one ketenyl group followed by fast capture of the intermediate radical by a second TEMPO, and then reaction of the remaining ketene.     

Nitroxyl radical reactions with 4-pentenyl- and cyclopropylketenes: new routes to 5-hexenyl- and cyclopropylmethyl radicals

4-Pentenylketenes 4a and 9 and cyclopropylketenes 3a, 13, 14 (RCH=C=O) are generated by photochemical Wolff rearrangements and observed by IR as relatively long-lived species at room temperature in hydrocarbon solvents. The reactions of these ketenes with the nitroxyl radicals tetramethylpiperidinyloxyl (TEMPO, TO*) and tetramethylisoindoline-2-oxyl (TMIO, IO*) form carboxy substituted 5-hexenyl and cyclopropylmethyl radicals which are either trapped by a second nitroxyl radical or undergo rearrangements followed by trapping. The rate constant of the reaction of 4a with TEMPO was similar to that of n-BuCH=C=O (1b), while 3a was 4.3 times more reactive, indicating cyclopropyl stabilization of the incipient radical.     

Nitroxyl radical addition to pentafulvenones forming cyclopentadienyl radicals: a test for cyclopentadienyl radical destabilization.

Photochemical Wolff rearrangements in alkane solvents of the 6-diazo-2,4-cyclohexadienones 4 and 13-15 give pentafulvenone (1), 2,3-benzopentafulvenone (2), dibenzopentafulvenone (3), and 2,4-di-tert-butylpentafulvenone (16), as identified by conventional UV and IR spectroscopy. Reactions of these fulvenyl ketenes with tetramethylpiperidinyloxyl (TEMPO) proceed by addition of TEMPO to the carbonyl carbon forming delocalized radicals for 1 and 2 which add one or more further TEMPO molecules, while the initial radical products formed from 3 and 16 dimerize. The rate constants of these reactions compared to hydration rate constants for the same compounds show the benzannulated derivatives 2 and 3 fit a previous correlation k(2)(TEMPO) vs k((H(2)O), whereas for 1 and 16 there is evidence for inhibition of reactions with radicals. The deviations are consistent with an absence of aromatic stabilization of the cyclopentadienyl radicals from 1 and 16 that is compensated in the benzannulated derivatives.     

Alkyne insertion into cyclometallated pyrazole and imine complexes of iridium, rhodium and ruthenium; relevance to catalytic formation of carbo- and heterocycles

The cyclometallated complexes [MCl(C^N)(ring)] (HC^N = 2-phenylpyrazole, M = Ir, Rh ring = Cp*; M = Ru, ring = p-cymene) readily undergo insertion reactions with RC≡CR (R = CO(2)Me, Ph) to give mono insertion products, the rhodium complex also reacts with PhC≡CH regiospecifically to give an analogous product. The products of the reactions of the cyclometallated imine complexes [MCl(C^N)Cp*] (HC^N = PhCH=NR, R = Ph, CH(2)CH(2)OMe, Me; M = Ir, Rh) with PhC≡CPh depend on the substituent R; when R = CH(2)CH(2)OMe a monoinsertion is observed, however for R = Me the initial insertion product is unstable, undergoing reductive elimination with loss of the organic fragment, and for R = Ph no metal-containing product is isolated. With PhC≡CH the cyclometallated imine complexes can give mono or di-insertion products. The implications for catalytic synthesis of carbo- and heterocycles by a tandem C-H activation, alkyne insertion mechanism are discussed.     

Fluorocarbon soluble copper(II) carboxylate complexes with nonfluoroponytailed nitrogen ligands as precatalysts for the oxidation of alkenols and alcohols under fluorous biphasic or thermomorphic modes: structural and mechanistic aspects

This fluorous biphasic catalysis (FBC) contribution was focused on the synthesis and characterization of new fluorous soluble R(f)-Cu(II) carboxylate complexes containing nonfluoroponytailed ligands and defines their role as precatalysts for the FBC oxidation of alkenols and alcohols in the presence of 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO)/O(2). In this FBC approach, we have utilized the phase-switching technique of Vincent et al. (J. Am. Chem. Soc. 2002, 124, 12942) to solubilize the nonfluoroponytailed ligands, N-1,4,7-Me(3)TACN, 2, and N-1,4,7-pentamethyldiethylenetriamine (PMDETA), 3, by reaction with a fluorous solvent-soluble copper (II) dimeric complex, [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2)](2), 1. Moreover, the reaction of nonfluoroponytailed ligands 2 and 3 with 1 afforded new perfluoroheptane-soluble Cu(II) complexes, [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2)(2)], 4, and [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2) (3)], 5, respectively. The known Cu(II) complex, 1, was further characterized by electron paramagnetic resonance (EPR) spectroscopy confirming its dimeric structure, while 4 and 5 were characterized by elemental analysis, IR, diffuse reflectance UV-vis, and EPR spectroscopy. Furthermore, 1, 4, and 5 were evaluated as precatalysts for alkenol and alcohol oxidation. The oxidation reactions of alkenols and alcohols in the presence of TEMPO/O(2) proceeded under FBC conditions for 1, 4, and 5, but 1-octanol was unreactive under single-phase FBC conditions at 90 degrees C with TEMPO/O(2). The thermomorphic property of 5, soluble in chlorobenzene/toluene at 90 degrees C but insoluble at room temperature, was also evaluated in the selective oxidation of p-nitrobenzyl alcohol to p-nitrobenzaldehyde. Plausible mechanisms concerning these FBC/thermomorphic oxidation reactions will be discussed.     

Reactions of [Cp*Ru(H2O)(NBD)]+ with alkynes

Formal [2 + 2 + 2] addition reactions of [Cp*Ru(H₂O)(NBD)]BF₄ (NBD = norbornadiene) with PhC?CR (R = H, COOEt) give [Cp*Ru(η⁶‐C₆H₅? C₉H₈R)] BF₄ (1a, R = H; 2a, R = COOEt). Treatment of [Cp*Ru(H₂O)(NBD)]BF₄ with PhC?C? C?CPh does not give [2 + 2 + 2] addition product, but [Cp*Ru(η⁶‐C₆H₅? C?C? C?CPh)] BF₄(3a). Treatment of 1a, 2a, 3a with NaBPh₄ affords [Cp*Ru(η⁶‐C₆H₅? C₉H₈R)] BPh₄ (1b, R = H; 2b, R = COOEt) and [Cp*Ru(η⁶‐C₆H₅? C?C? C?CPh)] BPh₄(3b). The structures of 1b, 2b and 3b were determined by X‐ray crystallography. Copyright © 2007 John Wiley & Sons, Ltd.     

Dienophilic behavior of the vinylic (C=C) and the carbonyl (C=O) bonds of ketenes in reactions with 1,3-diazabuta-1,3-dienes

[reaction: see text] Ab initio and density functional studies (DFT) on cycloaddition reactions of 1,3-diazabuta-1,3-dienes with ketenes are reported. The vinylic (C=C) and the carbonyl (C=O) units of the ketenes are found to participate in concerted asynchronous [4 + 2] cycloaddition reactions. The transition states (3t, 4t, and 7t) for these paths have been located on the PE surface at the correlated levels of ab initio calculations. A reasonable mechanism for the formation of [4 + 2] and [2 + 2] adducts is presented.     

C-C alpha insertion: insertion of an alkyne into the C-C single bond between the carbene-carbon atom and the alpha-carbon atom of a Fischer carbene complex by an unprecedented metalla(di-pi-methane) skeletal rearrangement

The first examples of insertion of a C(triple bond)C bond of an alkyne into a C(carbene)-Calpha single bond of a carbene complex (C-Calpha insertion) are reported. (prim-Alkyl)carbene complexes [(OC)(5)M=C(OEt)CH(2)R] (1 a-f; M=Cr, W; R=nPr, C(7)H(7), Ph) undergo C-Calpha insertion of electron-deficient alkynes [PhC(triple bond)CC(XEt)NMe(2)]BF(4) (5 a,b; X=O, S) to give zwitterionic carbiminium carbonylmetalates 3 a-g, which are thermally transformed into (CO)(4)M chelate carbene complexes 4 a-g by elimination of CO. The overall reaction is highly regio- and stereoselective. It involves an unprecedented metalla(di-pi-methane) rearrangement as the key step.     

Nitrile-amidine coupling at Pt(IV) and Pt(II) centers. An easy entry to imidoylamidine complexes

Treatment of trans-[PtCl4(RCN)2] (R = Me, Et, Ph, NEt2) with 2 equiv of the amidine PhC(=NH)NHPh in a suspension of MeCN (R = Me), CHCl3 (R = Et, Ph), or in CHCl3 solution (R = NEt2) results in the formation of the imidoylamidine complexes trans-[PtCl4{NH=C(R)N=C(Ph)NHPh}2] (1-4) isolated in good yields (66-84%). The reaction of soluble complexes 3 and 4 with 2 equiv of Ph3P=CHCO2Me in CH2Cl2 (40 degrees C, 5 h) leads to dehydrochlorination resulting in a chelate ring closure to furnish the platinum(IV) chelates [PtCl2{NH=C(R)NC(Ph)=NPh}2] (R = Ph, 5; R = NEt2, 6), accordingly, and the phosphonium salt [Ph3PCH2CO2Me]Cl. Treatment of 5 with 3 equiv of Ph3P=CHCO2Me at 50 degrees C for 5 d resulted in only a 30% conversion to the corresponding Pt(II) complex [Pt{NH=C(NEt2)NC(Ph)=NPh}2] (15). The reduction can be achieved within several minutes, when Ph2PCH2CH2PPh2 in CDCl3 is used. When the platinum(II) complex trans-[PtCl2(RCN)2] is reacted with 2 equiv of the amidine, the imidoylamidinato complexes [PtCl(RCN){NH=C(R)NC(Ph)=NHPh}] (8-11) and [PhC(=NH)NHPh] x HCl (7) are formed. The reaction of trans-[PtCl2(RCN)2] with 4 equiv of the amidine under a prolonged reaction time or treatment of [PtCl(RCN){NH=C(R)NC(Ph)=NHPh}] (8-11) with 2 more equiv of the amidine yields the complex bearing two chelate rings [Pt{NH=C(R)NC(Ph)=NHPh}2] (12-15). The treatment of cis-[PtCl2(RCN)2] (R = Me, Et) with the amidine gives ca. 50-60% yield of [PtCl2{NH=C(R)NHC(Ph)=NHPh}] (16 and 17). All of the platinum compounds were characterized by elemental analyses; FAB mass spectrometry; IR spectroscopy; 1H, 13C{1H}, and 195Pt NMR spectroscopies, and four of them (4, 6, 8, and 15) were also characterized by X-ray crystallography. The coupling of the Pt-bound nitriles and the amidine is metal-mediated insofar as RCN and PhC(=NH)NHPh do not react in the absence of the metal centers in conditions more drastic than those of the observed reactions. The nitrile-amidine coupling reported in this work constitutes a route to the synthesis of imidoylamidine complexes, some of them exhibiting luminescent properties.     

Exogenous nitrile substrate hydroxylation by a new dicopper-hydroperoxide complex

A dicopper(I)/phenol-ligand complex in RCN solvents reacts with O2 producing a mu-1,1-hydroperoxo dicopper(II) species. Subsequent thermal transformation results in nitrile hydroxylation and elimination of cyanide, as revealed by the isolation in comparable yields of (i) a cyanide-bridged tetranuclear cluster complex and (ii) benzaldehyde (for R = PhCH2); 18O labeling confirms that the PhC(O)H oxygen atom derives from O2.     

Anisole-diphenoxide ligands and their zirconium dichloride and dialkyl complexes

Linear triphenol H3[RO3] (2,6-bis(3-tert-butyl-5-methyl-2-hydroxybenzyl)-4-R-phenol; R = Me, tBu) was found to undergo selective mono-deprotonation and mono-O-methylation. Deprotonation of H3[RO3] with 1 equiv of nBuLi resulted in the formation of Li{H2[RO3]}(Et2O)2 (R = Me (1a), tBu (1b)), in which the central phenol unit was lithiated. Treatment of H3[RO3] with methyl p-toluenesulfonate in the presence of K2CO3 in CH3CN gave the corresponding anisol-diphenol H2[RO2O] (2,6-bis(3-tert-butyl-5-methyl-2-hydroxybenzyl)-4-R-anisole; R = Me (2a), tBu (2b)). Reaction of H2[RO2O] with 2 equiv of nBuLi gave the dilithiated derivatives Li2[RO2O]. The lithium salts were reacted with ZrCl4 in toluene/THF to obtain the dichloride complex [RO2O]ZrCl2(thf) (R = Me (3a), tBu (3b)). 3b underwent dimerization along with a loss of THF to generate {[tBuO2O]ZrCl2}2 (4), whereas 4 was dissolved in THF to regenerate the monomer 3b. Alkylation of 3 with MeMgBr, PhCH2MgCl, and Me3SiCH2MgCl gave [MeO2O]ZrMe2(thf) (5), [RO2O]Zr(CH2Ph)2 (R = Me (6a), tBu (6b)), and [tBuO2O]Zr(CH2SiMe3)2 (7), respectively. Reaction of 3b with LiBHEt3 produced the hydride-bridged dimer [Li2(thf)4Cl]{[tBuO3]Zr}2(micro-H)3} (8), in which demethylation of the dianionic [tBuO2O] ligand took place to give the trianionic [tBuO3] ligand. The X-ray crystal structures of 1b, 2a, 3a, 4, 6a, and 7 were reported.     

Kinetic and mechanistic study on the reaction of alkylcobaloximes with azoles

The kinetics of axial water substitution by azoles (pyrazole and 1,2,4-triazole) in three different cobaloximes, viz.trans-[Co(Hdmg)(2)(R)H(2)O] where Hdmg = dimethylglyoximate, R = PhCH(2), Et and CF(3)CH(2), were studied as a function of azole concentration, temperature and pressure in aqueous solution. The second order rate constants for the substitution of water in trans-[Co(Hdmg)(2)(R)H(2)O] for R = Et at pH 6.0, 25 degrees C and I= 0.1 M (NaClO(4)), were found to be 1309 and 1200 M(-1) s(-1) for pyrazole (Pz) and 1,2,4-triazole (Tz), respectively, and those obtained for R = PhCH(2) were found to be 755 and 691 M(-1) s(-1), respectively. The second order rate constants in the case of R = CF(3)CH(2) were found to be 0.358 and 0.348 M(-1) s(-1) for Pz and Tz, respectively. The relative order of reactivity for the different alkyls being Et > PhCH(2) > CF(3)CH(2). The activation parameters (DeltaH([not equal]), DeltaS([not equal]) and DeltaV([not equal])) obtained for these reactions were found to be in the range of 65-87 kJ mol(-1), 24-47 J mol(-1) K(-1) and 2.5-7.7 cm(3) mol(-1), respectively. These data suggest that an I(d) substitution mechanism operates where the azoles participate in the transition state.     

Stepwise Synthesis of Fullerene Cyclopentadienide R(5)C(60)(-) and Indenide R(3)C(60)(-). An Approach to Fully Unsymmetrically Substituted Derivatives

Fullerene cyclopentadienide (PhCH(2))(2)Ph(3)C(60)(-) and indenide (PhCH(2))(2)PhC(60)(-), each bearing two different organic groups, were efficiently synthesized through regioselective reactions of 1,4-(PhCH(2))(2)C(60) with an organocopper reagent (PhMgBr/CuBr.SMe(2)) or a Grignard reagent (PhMgBr) followed by deprotonation with KO(t)()Bu.     

α-苯亚甲氨基苯甲基膦酸酯的1,3-偶极及其负离子的环加成反应

用α-苯亚甲氨基苯甲基膦酸酯与几种亲偶极物进行热及碱催化反应得到含磷酰基与不含磷酰基的加成产物,描述了产品的合成方法和立体化学测定,根据立体化学分析结果,可以认为反应是通过环加成的途径进行的.     

Palladium-catalyzed coupling of allenylphosphonates, phenylallenes, and allenyl esters: remarkable salt effect and routes to novel benzofurans and isocoumarins

Coupling reactions of allenylphosphonates (OCH(2)CMe(2)CH(2)O)P(O)CH=C=CRR' [R, R' = H (1a), R = H, R' = Me (1b), R = R' = Me (1c)] with aryl iodides, iodophenol, and iodobenzoic acid in the presence of palladium(II) acetate are investigated and compared with those of phenylallenes PhCH=C=CR2 [R = H (2a), Me (2b)] and allenyl esters EtO(2)CCH=C=CR(2) [R = H (2c), Me (2d)]. While 1b and 1c couple with different stereochemical outcomes using PhI in the presence of Pd(OAc)(2)/PPh(3)/K(2)CO(3) to give phenyl-substituted 1,3-butadienes, 1a does not undergo coupling but isomerizes to the acetylene (OCH(2)CMe(2)CH(2)O)P(O)CCMe (7). In the reaction of 1c with PhI, use of K(2)CO(3) affords the butadiene (Z)-(OCH(2)CMe(2)CH(2)O)P(O)CH=C(Ph)-C(Me)=CH(2) (12); in contrast, the use of Ag(2)CO(3) leads to the allene (OCH(2)CMe(2)CH(2)O)P(O)C(Ph)=C=CMe(2) (20), showing that these bases differ very significantly in their roles. The reaction of 1a with PhI or PhB(OH)2 in (t)he presence of Pd(OAc)2/CsF/DMF leads mainly to (E)-(OCH(2)CMe(2)CH(2)O)P(O)CH=C(Me)Ph (21) and (OCH(2)CMe(2)CH(2)O)P(O)CH2-C(Ph)=CH(2) (22) and is thus a net 1,2-addition of Ph-H. Compound 1b reacts with iodophenol in the presence of Pd(OAc)(2)/PPh(3)/K(2)CO(3) to give a benzofuran that has a structure different from that obtained by using 1c under similar conditions. Treatment of 1a with iodophenol/Pd(OAc)(2)/CsF/DMF also gives a benzofuran whose structure is different from that obtained by using 2a under similar conditions. In the reaction with 2-iodobenzoic acid, 1a and 2c afford one type of isocoumarin, while 1b,c and 2a,b give a second type of isocoumarin. The structures of key compounds are established by X-ray crystallography. Utility of the phosphonate products in the Horner-Wadsworth-Emmons reaction is demonstrated.     

Glyoxalase I-type hemithioacetal isomerization reactivity of a mononuclear Ni(II) deprotonated amide complex

The synthesis, characterization, and hemithioacetal isomerization reactivity of a mononuclear Ni(II) deprotonated amide complex, [(bppppa-)Ni]ClO4.CH3OH (1, bppppa- = monoanion of N,N-bis-[(6-phenyl-2-pyridyl)methyl]-N-[(6-pivaloylamido-2-pyridyl)methyl]amine), are reported. Complex 1 was characterized by X-ray crystallography, 1H NMR, UV-vis, FTIR, and elemental analysis. Treatment of 1 with an equimolar amount of the hemithioacetal PhC(O)CH(OH)SCD3 in dry acetonitrile results in the production of the thioester PhCH(OH)C(O)SCD3 in approximately 60% yield. This reaction is conveniently monitored via 2H NMR spectroscopy. A protonated analogue of 1, [(bppppa)Ni](ClO4)2 (2), is unreactive with the hemithioacetal, thus indicating the requirement of the anionic chelate ligand in 1 for hemithioacetal isomerization reactivity. Complex 1 is unreactive with the thioester product, PhCH(OH)C(O)SCD3, which indicates that the pKa value for the PhCH(OH)C(O)SCD3 proton of the thioester must be significantly higher than the pKa value of the C-H proton of the hemithioacetal (PhC(O)CH(OH)SCD3). Complex 1 is the first well-characterized Ni(II) coordination complex to exhibit reactivity relevant to Ni(II)-containing E. coli glyoxalase I. Treatment of NiBr2.2H2O with PhC(O)CH(OH)SCD3 in the presence of 1-methylpyrrolidine also yields thioester product, albeit the reaction is slower and involves the formation of multiple -SCD3 labeled species, as detected by 2H NMR spectroscopy. The results of this study provide the first insight into hemithioacetal isomerization promoted by a synthetic Ni(II) coordination complex versus a simple Ni(II) ion.     

Cationic diiron and diruthenium μ-allenyl complexes: synthesis, X-ray structures and cyclization reactions with ethyldiazoacetate/amine affording unprecedented butenolide- and furaniminium-substituted bridging carbene ligands

The novel cationic diiron μ-allenyl complexes [Fe(2)Cp(2)(CO)(2)(μ-CO){μ-η(1):η(2)(α,β)-C(α)(H)=C(β)=C(γ)(R)(2)}](+) (R = Me, 4a; R = Ph, 4b) have been obtained in good yields by a two-step reaction starting from [Fe(2)Cp(2)(CO)(4)]. The solid state structures of [4a][CF(3)SO(3)] and of the diruthenium analogues [Ru(2)Cp(2)(CO)(2)(μ-CO){μ-η(1):η(2)(α,β)-C(α)(H)=C(β)=C(γ)(R)(2)}][BPh(4)] (R = Me, [2a][BPh(4)]; R = Ph, [2c][BPh(4)]) have been ascertained by X-ray diffraction studies. The reactions of 2c and 4a with Br?nsted bases result in formation of the μ-allenylidene compound [Ru(2)Cp(2)(CO)(2)(μ-CO){μ-η(1):η(1)-C(α)=C(β)=C(γ)(Ph)(2)}] (5) and of the dimetallacyclopentenone [Fe(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)=C(β)(C(γ)(Me)CH(2))C(=O)}] (6), respectively. The nitrile adducts [Ru(2)Cp(2)(CO)(NCMe)(μ-CO){μ-η(1):η(2)-C(α)(H)=C(β)=C(γ)(R)(2)}](+) (R = Me, 7a; R = Ph, 7b), prepared by treatment of 2a,c with MeCN/Me(3)NO, react with N(2)CHCO(2)Et/NEt(3) at room temperature, affording the butenolide-substituted carbene complexes [Ru(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)[upper bond 1 start]C(β)C(γ)(R)(2)OC(=O)C[upper bond 1 end](H)] (R = Me, 10a; R = Ph, 10b). The intermediate cationic compound [Ru(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)[upper bond 1 start]C(β)C(γ)(Me)(2)OC(OEt)C[upper bond 1 end](H)](+) (9) has been detected in the course of the reaction leading to 10a. The addition of N(2)CHCO(2)Et/NHEt(2) to 7a gives the 2-furaniminium-carbene [Ru(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)[upper bond 1 start]C(β)C(γ)(Me)(2)OC(OEt)C[upper bond 1 end](H)](+) (11). The X-ray structures of 10a, 10b and [11][BF(4)] have been determined. The reactions of 4a,b with MeCN/Me(3)NO result in prevalent decomposition to mononuclear iron species.     

Synthesis and Crystal Structure of an Ionic Compound [Fe(CN)_6·(PhCH_2NC_9H_7)_4]·12H_2O

A novel ionic compound [Fe(CN)6(PhCH2NC9H7)4]·12H2O (C70H80FeN10O12, Mr = 1309.29) has been synthesized and its structure was characterized by IR, elemental analysis and X-ray diffraction. The compound crystallizes in triclinic, space group P1, with a = 10.968(7), b = 11.466(7), c = 14.077(8) , α = 87.014(7), β = 78.124(7), γ = 72.708(7)o, V = 1654.1(17) 3, Z = 1, Dc = 1.314 g·cm–3, F(000) = 692, μ = 0.298 mm–1, the final R = 0.0519 and wR = 0.1355. The building unit of the title compound consists of four (PhCH2N+C9H7) ions, one [Fe(CN)6]4– anion, and a dozen water molecules. According to the structural analysis, [Fe(CN)6]4– ions are linked together by O–H···O and O–H···N hydrogen bonds, while (PhCH2N+C9H7) and [Fe(CN)6]4– ions interact with each other by electrostatic force to form an ionic compound.     

Photochemical cleavage and release of carboxylic acids from alpha-keto amides

In aqueous media, alpha-keto amides LGCH(2)COCON(R)CH(R')CH(3) (1a, R = Et, R' = H; 1b, R = (i)()Pr, R' = Me; 1c, R = Ph, R' = H) with various carboxylate leaving groups (LG) at the C-3 position undergo photocleavage and release of carboxylic acids with formation of diastereomeric 5-hydroxyoxazolidin-4-ones 2a,c in the cases of 1a,c or 5-methyleneoxazolidin-4-ones 3b in the case of 1b. For 1a,b, Phi(photocleavage) = 0.24-0.38, whereas Phi(photocleavage) = ca. 0.05 for 1c. The proposed mechanism involves transfer of hydrogen from an N-alkyl group to the keto oxygen to produce zwitterionic intermediates 4a-c that eliminate carboxylate anions. The resultant imminium ions, H(2)C=C(OH)CON(+)(R)=C(R')CH(3) 5a-c, cyclize intramolecularly to 3b or undergo intermolecular addition of water followed by tautomerization and cyclization to give 2a,c. These inter- or intramolecular trapping reactions of 5 release protons that decrease the pH and cause bleaching of the 620 nm band of the pH indicator, bromocresol green. Determination of the bleaching kinetics by laser flash photolysis methods in the case of 1a gives time constants of 18-137 mus, depending on the leaving group ability of the carboxylate anion, whereas amides 1b show only a small leaving group effect. For 1a, the large leaving group effect is consistent with rate-limiting carboxylate elimination from 4a, whereas the proton release step would be largely rate determining for 1b. Photolyses of 1a (LG = CH(3)CO(2)(-), PhCH(2)CO(2)(-)) in neat CH(3)CN results in carboxylate elimination to form imminium ion 5a, followed by internal return to give aminals.