The reaction of Li[Al(OR)4] R = OC(CF3)2Ph, OC(CF3)3 with NO/NO2 giving NO[Al(OR)4], Li[NO3] and N2O. The synthesis of NO[Al(OR)4] from Li[Al(OR)4] and NO[SbF6] in sulfur dioxide solution

NO[Al(OC(CF(3))(2)Ph)(4)] 1 and NO[Al(OC(CF(3))(3))(4)] 2 were obtained by the metathesis reaction of NO[SbF(6)] and the corresponding Li[Al(OR)(4)] salts in liquid sulfur dioxide solution in ca 40% (1) and 85% (2) isolated yield. 1 and 2, as well as Li[NO(3)] and N(2)O, were also given by the reaction of an excess of mixture of (90 mol%) NO, (10 mol%) NO(2) with Li[Al(OR)(4)] followed by extraction with SO(2). The unfavourable disproportionation reaction of 2NO(2)(g) to [NO](+)(g) and [NO(3)](-)(g)[DeltaH degrees = +616.2 kJ mol(-1)] is more than compensated by the disproportionation energy of 3NO(g) to N(2)O(g) and NO(2)(g)[DeltaH degrees =-155.4 kJ mol(-1)] and the lattice energy of Li[NO(3)](s)[U(POT)= 862 kJ mol(-1)]. Evidence is presented that the reaction proceeds via a complex of [Li](+) with NO, NO(2)(or their dimers) and N(2)O. NO(2) and Li[Al(OC(CF(3))(3))(4)] gave [NO(3)(NO)(3)][Al(OC(CF(3))(3))(4)](2), NO[Al(OC(CF(3))(3))(4)] and (NO(2))[Al(OC(CF(3))(3))(4)] products. The aluminium complex [Li[AlF(OC(CF(3))(2)Ph)(3)]](2) 3 was prepared by the thermal decomposition of Li[Al(OC(CF(3))(2)Ph)(4)]. Compounds 1 and 3 were characterized by single crystal X-ray structural analyses, 1-3 by elemental analyses, NMR, IR, Raman and mass spectra. Solid 1 contains [Al(OC(CF(3))(2)Ph)(4)](-) and [NO](+) weakly linked via donor acceptor interactions, while in the SO(2) solution there is an equilibrium between the associated [NO](+)[Al(OC(CF(3))(2)Ph)(4)](-) and separated solvated ions. Solid 2 contains essentially ionic [NO](+) and [Al(OC(CF(3))(3))(4)](-). Complex 3 consists of two [Li[AlF(OC(CF(3))(2)Ph)(3)]] units linked via fluorine lithium contacts. Compound 1 is unstable in the SO(2) solution and decomposes to yield [AlF(OC(CF(3))(2)Ph)(3)](-), [(PhC(CF(3))(2)O)(3)Al(mu-F)Al(OC(CF(3))(2)Ph)(3)](-) anions as well as (NO)C(6)H(4)C(CF(3))(2)OH, while compound 2 is stable in liquid SO(2). The [small nu](NO(+)) in 1 and [NO](+)(toluene)[SbCl(6)] are similar, implying similar basicities of [Al(OC(CF(3))(2)Ph)(4)](-) and toluene.     

Copper(I)-dioxygen reactivity of [(L)Cu(I)](+) (L = tris(2-pyridylmethyl)amine): kinetic/thermodynamic and spectroscopic studies concerning the formation of Cu-O2 and Cu2-O2 adducts as a function of solvent medium and 4-pyridyl ligand substituent variations

The kinetic and thermodynamic behavior of O(2)-binding to Cu(I) complexes can provide fundamental understanding of copper(I)/dioxygen chemistry, which is of interest in chemical and biological systems. Here we report stopped-flow kinetic investigations of the oxygenation reactions of a series of tetradentate copper(I) complexes [(L(R))Cu(I)(MeCN)](+) (1(R), R=H, Me, tBu, MeO, Me(2)N) in propionitrile (EtCN), tetrahydrofuran (THF), and acetone. The syntheses of 4-pyridyl substituted tris(2-pyridylmethyl)amine ligands (L(R)) and copper(I) complexes are detailed. Variations of ligand electronic properties are manifested in the electrochemistry of 1(R) and nu(CO) of [(L(R))Cu(I)-CO](+) complexes. The kinetic studies in EtCN and THF show that the O(2)-reactions of 1(R) follow the reaction mechanism established for oxygenation of 1(H) in EtCN (J. Am. Chem. Soc. 1993, 115, 9506), involving reversible formation (k(1)/k(-1)) of [(L(R))Cu(II)(O(2-))](+) (2(R)), which further reacts (k(2)/k(-2)) with 1(R) to form the 2:1 Cu(2)O(2) complex [[(L(R))Cu(II)](2)(O(2)(2-))](2+) (3(R)). In EtCN, the rate constants for formation of 2(R) (k(1)) are not dramatically affected by the ligand electronic variations. For R = Me and tBu, the kinetic and thermodynamic parameters are very similar to those of the parent complex (1(H)); e.g., k(1) is in the range 1.2 x 10(4) to 3.1 x 10(4) M(-1) s(-1) at 183 K. With the stronger donors R = MeO and Me(2)N, more significant effects were observed, with the expected increase in thermodynamic stability of resultant 2(R) and 3(R) complexes, and decreased dissociation rates. The modest ligand electronic effects manifested in EtCN are due to the competitive binding of solvent and dioxygen to the copper centers. In THF, a weakly coordinating solvent, the formation rate for 2(H) is much faster (>/=100 times) than that in EtCN, and the thermodynamic stabilities of both the 1:1 (K(1)) and 2:1 (beta = K(1)K(2)) copper-dioxygen species are much higher than those in EtCN (e.g., for 2(H), deltaH(o) (K(1))=-41 kJ mol(-1) in THF versus -29.8 kJ mol(-1) in EtCN; for 3(H), deltaH(o) (beta)=-94 kJ mol(-1) in THF versus -77 kJ mol(-1) in EtCN). In addition, a more significant ligand electronic effect is seen for the oxygenation reactions of 1(MeO) in THF compared to that in EtCN; the thermal stability of superoxo- and peroxocopper complexes are considerably enhanced using L(MeO) compared to L(H). In acetone as solvent, a different reaction mechanism involving dimeric copper(I) species [(L(R))(2)Cu(I)(2)](2+) is proposed for the oxygenation reactions, supported by kinetic analyses, electrical conductivity measurements, and variable-temperature NMR spectroscopic studies. The present study is the first systematic study investigating both solvent medium and ligand electronic effects in reactions forming copper-dioxygen adducts.     

Discrete triangle, square and hexametallic alkynyl cyano-bridged compounds based on [cis-Pt(Ctbond;CR)2(CN)2]2- building blocks

Novel mixed bis(alkynyl)bis(cyano)platinate(II) species [cis-Pt(Ctbond;CR)(2)(CN)(2)](2-) (1 a: R = tBu, 1 b: R = Ph) have been prepared and their potential as building blocks in the generation of self-organized systems with a variable molecular architecture has been studied. The reaction of 1 with the ditopic acceptor species [[cis-Pt(C(6)F(5))(2)S](2)(dppa)] (dppa=diphenylphosphinoacetylene) gave the dianionic cyanide/dppa bridged molecular platinotriangles (NBu(4))(2)[(C(6)F(5))(2)Pt(micro-dppa)[(micro-CN)(2)Pt(Ctbond;CR)(2)]Pt(C(6)F(5))(2)] (2). X-ray analysis of 2 a confirmed that the "Pt(2)(C(6)F(5))(4)(micro-dppa)" binuclear moiety is connected to the dianionic "Pt(Ctbond;CR)(2)(CN)(2)" unit by two bridging cyanide ligands. Moreover, treatment of 1 with the solvent cationic species [M(cod)(acetone)(2)](+) afforded heterometallic molecular squares Pt(2)M(2) (M=Rh, Ir) containing cyanide bridges and terminal alkynyl ligands, (NBu(4))(2)[cyclo[[cis-Pt(Ctbond;CR)(2)(micro-CN)(2)][M(cod)]](2)] (3: M=Rh, 4: M = Ir). The solid-state structures of phenyl derivatives have been determined by X-ray crystallography. The terminal alkynyl ligands in these cyanide-bridged molecular squares 3 and 4 have been used in the assembly of higher multimetallic complexes. Thus, very unusual bis(double-alkynide)-cyanide-bridged hexametallic compounds (NBu(4))(2)[[(C(6)F(5))(2)Pt(micro-Ctbond;CPh)(2)(micro-CN)(2)](2)[M(cod)](2)] (5 b: M=Rh, 6 b: M = Ir) were easily formed by simple reactions of 3 b and 4 b with two equivalents of [cis-Pt(C(6)F(5))(2)(thf)(2)]. An X-ray diffraction study on complex 5 b indicated that the derivative was formed by a simultaneous migration of one sigma-alkynyl group from each "Pt(Ctbond;CPh)(2)(micro-CN)(2)" corner of the square to both "Pt(C(6)F(5))(2)" units, resulting in bent sigma,pi-double-alkynyl bridging systems. Finally, the novel supramolecular anionic assemblies (NBu(4))(4)[cyclo[[cis-Pt(Ctbond;CR)(2)(micro-CN)(2)][SnPh(3)]](4)] 7 have been obtained by self-assembly of 1 and [SnPh(3)(acetone)(2)](+).     

Alkynyldiphenylphosphine d8 (Pt, Rh, Ir) complexes: contrasting behavior toward cis-[Pt(C6F5)2(THF)2

The synthesis and characterization of a series of mononuclear d(8) complexes with at least two P-coordinated alkynylphosphine ligands and their reactivity toward cis-[Pt(C(6)F(5))(2)(THF)(2)] are reported. The cationic [Pt(C(6)F(5))(PPh(2)C triple-bond CPh)(3)](CF(3)SO(3)), 1, [M(COD)(PPh(2)C triple-bond CPh)(2)](ClO(4)) (M = Rh, 2, and Ir, 3), and neutral [Pt(o-C(6)H(4)E(2))(PPh(2)C triple-bond CPh)(2)] (E = O, 6, and S, 7) complexes have been prepared, and the crystal structures of 1, 2, and 7.CH(3)COCH(3) have been determined by X-ray crystallography. The course of the reactions of the mononuclear complexes 1-3, 6, and 7 with cis-[Pt(C(6)F(5))(2)(THF)(2)] is strongly influenced by the metal and the ligands. Thus, treatment of 1 with 1 equiv of cis-[Pt(C(6)F(5))(2)(THF)(2)] gives the double inserted cationic product [Pt(C(6)F(5))(S)mu-(C(Ph)=C(PPh(2))C(PPh(2))=C(Ph)(C(6)F(5)))Pt(C(6)F(5))(PPh(2)C triple-bond CPh)](CF(3)SO(3)) (S = THF, H(2)O), 8 (S = H(2)O, X-ray), which evolves in solution to the mononuclear complex [(C(6)F(5))(PPh(2)C triple-bond CPh)Pt(C(10)H(4)-1-C(6)F(5)-4-Ph-2,3-kappaPP'(PPh(2))(2))](CF(3) SO(3)), 9 (X-ray), containing a 1-pentafluorophenyl-2,3-bis(diphenylphosphine)-4-phenylnaphthalene ligand, formed by annulation of a phenyl group and loss of the Pt(C(6)F(5)) unit. However, analogous reactions using 2 or 3 as precursors afford mixtures of complexes, from which we have characterized by X-ray crystallography the alkynylphosphine oxide compound [(C(6)F(5))(2)Pt(mu-kappaO:eta(2)-PPh(2)(O)C triple-bond CPh)](2), 10, in the reaction with the iridium complex (3). Complexes 6 and 7, which contain additional potential bridging donor atoms (O, S), react with cis-[Pt(C(6)F(5))(2)(THF)(2)] in the appropriate molar ratio (1:1 or 1:2) to give homo- bi- or trinuclear [Pt(PPh(2)C triple-bond CPh)(mu-kappaE-o-C(6)H(4)E(2))(mu-kappaP:eta(2)-PPh(2)C triple-bond CPh)Pt(C(6)F(5))(2)] (E = O, 11, and S, 12) and [(Pt(mu(3)-kappa(2)EE'-o-C(6)H(4)E(2))(mu-kappaP:eta(2)-PPh(2)C triple-bond CPh)(2))(Pt(C(6)F(5))(2))(2)] (E = O, 13, and S, 14) complexes. The molecular structure of 14 has been confirmed by X-ray diffraction, and the cyclic voltammetric behavior of precursor complexes 6 and 7 and polymetallic derivatives 11-14 has been examined.     

Synthesis and reactivity of bridging and terminal hydrosulfido palladium and platinum complexes. Crystal structures of [NBu4]2[(Pt(c6F5)2(mu-SH)]2], [Pt(C6F5)2(PPh3)[S(H)AgPPh3]], and [Pt(C6F5)2(PPh3)[S(AuPPh3)2]

The reactions of the hydroxo complexes [M(2)R(4)(mu-OH)(2)](2)(-) (M = Pd, R = C(6)F(5), C(6)Cl(5); M = Pt, R = C(6)F(5)), [[PdR(PPh(3))(mu-OH)](2)] (R = C(6)F(5), C(6)Cl(5)), and [[Pt(C(6)F(5))(2)](2)(mu-OH)(mu-pz)](2-) (pz = pyrazolate) with H(2)S yield the corresponding hydrosulfido complexes [M(2)(C(6)F(5))(4)(mu-SH)(2)](2-), [[PdR(PPh(3))(mu-SH)](2)], and [[Pt(C(6)F(5))(2)](2)(mu-SH)(mu-pz)](2-), respectively. The monomeric hydrosulfido complexes [M(C(6)F(5))(2)(SH)(PPh(3))](-) (M = Pd, Pt) have been prepared by reactions of the corresponding binuclear hydrosulfido complexes [M(2)(C(6)F(5))(4)(mu-SH)(2)](2-) with PPh(3) in the molar ratio 1:2, and they can be used as metalloligands toward Ag(PPh(3))(+) to form the heterodinuclear complex [(C(6)F(5))(2)(PPh(3))[S(H)AgPPh(3)]], and toward Au(PPh(3))(+) yielding the heterotrinuclear complexes [M(C(6)F(5))(2)(PPh(3))[S(AuPPh(3))(2)]]. The crystal structures of [NBu(4)](2)[[Pt(C(6)F(5))(2)(mu-SH)](2)], [Pt(C(6)F(5))(2)(PPh(3))[S(H)AgPPh(3)]], and [Pt(C(6)F(5))(2)(PPh(3))[S(AuPPh(3))(2)]] have been established by X-ray diffraction and show no short metal-metal interactions between the metallic centers.     

Generation of cationic [Zr-[tert-butyl enolate]] reactive species: methyl abstraction versus hydride abstraction

Treatment of the neutral methyl-Zr-enolate [Cp(2)Zr(Me)[O(tBuO)C=CMe(2)]] (1) with one equivalent of B(C(6)F(5))(3) or [HNMe(2)Ph][B(C(6)F(5))(4)] as a methyl abstractor in THF at 0 degrees C leads to the selective formation of the free ion pair complex [Cp(2)Zr(THF)[O(tBuO)C=CMe(2)]](+) [anion](-) (2) (anion=MeB(C(6)F(5))(3) (-), B(C(6)F(5))(4) (-)), which is relevant to the controlled polymerization of methacrylates. Cation 2 rapidly decomposes at 20 degrees C in THF with release of one equivalent of isobutene to form the cationic Zr-carboxylate species [Cp(2)Zr(THF)(O(2)CiPr)](+) (3), through a proposed intramolecular proton transfer process from the tert-butoxy group to the enolate. The reaction of 1 with one equivalent of B(C(6)F(5))(3) or [HNMe(2)Ph][B(C(6)F(5))(4)] in CH(2)Cl(2) leads to the direct, rapid formation of the dimeric micro-isobutyrato-Zr dicationic species [[Cp(2)Zr[micro-(O(2)CiPr)]](2)](2+) (4), which gives 3 upon dissolution in THF. Contrastingly, when [Ph(3)C][B(C(6)F(5))(4)] is used to generate the cationic Zr-enolate species from 1 in CD(2)Cl(2), a 15:85 mixture of dicationic complexes 4 and [[Cp(2)Zr[micro-(O(2)C-C(Me)=CH(2))]](2)](2+)[B(C(6)F(5))(4)]]2-(5-[B(C(6)F(5))(4)](2)) is obtained quantitatively. The formation of 5 is proposed to arise from initial hydride abstraction from a methyl enolate group by Ph(3)C(+), as supported by the parallel production of Ph(3)CH, and subsequent elimination of methane and isobutene. In addition to standard spectroscopic and analytical characterizations for the isolated complexes 2-5, complexes 4 and 5 have also been structurally characterized by X-ray diffraction studies.     

A mechanistic study of the reaction between a diiron(II) complex [FeII(2)(mu-OH)2(6-Me3-TPA)2](2+) and O2 to form a diiron(III) peroxo complex

A kinetic study of the reaction between a diiron(II) complex [Fe(II)(2)(mu-OH)(2)(6-Me(3)-TPA)(2)](2+) 1, where 6-Me(3)-TPA = tris(6-methyl-2-pyridylmethyl)amine, and dioxygen is presented. A diiron(III) peroxo complex [Fe(III)(2)(mu-O)(mu-O(2))(6-Me(3)-TPA)(2)](2+) 2 forms quantitatively in dichloromethane at temperatures from -80 to -40 degrees C. The reaction is first order in [Fe(II)(2)] and [O(2)], with the activation parameters DeltaH(double dagger) = 17 +/- 2 kJ mol(-1) and DeltaS(double dagger) = -175 +/- 20 J mol(-1) K(-1). The reaction rate is not significantly influenced by the addition of H(2)O or D(2)O. The reaction proceeds faster in more polar solvents (acetone and acetonitrile), but the yield of 2 is not quantitative in these solvents. Complex 1 reacts with NO at a rate about 10(3) faster than with O(2). The mechanistic analysis suggests an associative rate-limiting step for the oxygenation of 1, similar to that for stearoyl-ACP Delta(9)-desaturase, but distinct from the probable dissociative pathway of methane monoxygenase. An eta(1)-superoxo Fe(II)Fe(III) species is a likely steady-state intermediate during the oxygenation of complex 1.     

Stabilization of the P(CF3)(2)(-) and P(C6F5)(2)(-) ions by coordination to pentacarbonyl tungsten: structures of [18-crown-6-K]P(CF3)2, [18-crown-6-K][W[P(CF3)2](CO)5], and [18-crown-6-K][[W(CO)5]2[mu-P(C6F5)2]].THF

The stabilization of the P(CF(3))(2)(-) ion by intermediary coordination to the very weak Lewis acid acetone gives access to single crystals of [18-crown-6-K]P(CF(3))(2). The X-ray single crystal analysis exhibits nearly isolated P(CF(3))(2)(-) ions with an unusually short P-C distance of 184(1) pm, which can be explained by negative hyperconjugation and is also found by quantum chemical hybrid DFT calculation. Coordination of the P(CF(3))(2)(-) ion to pentacarbonyl tungsten has only a minor effect on electronic and geometric properties of the P(CF(3))(2) moiety, while a strong increase in thermal stability of the dissolved species is achieved. The hitherto unknown P(C(6)F(5))(2)(-) ion is stabilized by coordination to pentacarbonyl tungsten and isolated as a stable 18-crown-6 potassium salt, [18-crown-6-K][W[P(C(6)F(5))(2)](CO)(5)], which is fully characterized. The tungstate, [W[P(C(6)F(5))(2)](CO)(5)](-), decomposes slowly in solution, while coordination of the phosphorus atom to a second pentacarbonyl tungsten moiety results in an enhanced thermal stability in solution. The single-crystal X-ray analysis of [18-crown-6-K][[W(CO)(5)](2)[mu-P(C(6)F(5))(2)]].THF exhibits a very tight arrangement of the two C(6)F(5) and two W(CO)(5) groups around the central phosphorus atom. NMR spectroscopic investigations of the [[W(CO)(5)](2)[mu-P(C(6)F(5))(2)]](-) ion exhibit a hindered rotation of both the C(6)F(5) and W(CO)(5) groups in solution.     

Excision of uranium oxide chains and ribbons in the novel one-dimensional uranyl iodates K(2)[(UO(2))3(IO(3))(4)O(2)] and Ba[(UO(2)2(IO(3))(2)O(2)](H(2)O)

The alkali metal and alkaline-earth metal uranyl iodates K(2)[(UO(2))(3)(IO(3))(4)O(2)] and Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O) have been prepared from the hydrothermal reactions of KCl or BaCl(2) with UO(3) and I(2)O(5) at 425 and 180 degrees C, respectively. While K(2)[(UO(2))(3)(IO(3))(4)O(2)] can be synthesized under both mild and supercritical conditions, the yield increases from <5% to 73% as the temperature is raised from 180 to 425 degrees C. Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O), however, has only been isolated from reactions performed in the mild temperature regime. Thermal measurements (DSC) indicate that K(2)[(UO(2))(3)(IO(3))(4)O(2)] is more stable than Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O) and that both compounds decompose through thermal disproportionation at 579 and 575 degrees C, respectively. The difference in the thermal behavior of these compounds provides a basis for the divergence of their preparation temperatures. The structure of K(2)[(UO(2))(3)(IO(3))(4)O(2)] is composed of [(UO(2))(3)(IO(3))(4)O(2)](2)(-) chains built from the edge-sharing UO(7) pentagonal bipyramids and UO(6) octahedra. Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O) consists of one-dimensional [(UO(2))(2)(IO(3))(2)O(2)](2)(-) ribbons formed from the edge sharing of distorted UO(7) pentagonal bipyramids. In both compounds the iodate groups occur in both bridging and monodentate binding modes and further serve to terminate the edges of the uranium oxide chains. The K(+) or Ba(2+) cations separate the chains or ribbons in these compounds forming bonds with terminal oxygen atoms from the iodate ligands. Crystallographic data: K(2)[(UO(2))(3)(IO(3))(4)O(2)], triclinic, space group P_1, a = 7.0372(5) A, b = 7.7727(5) A, c = 8.9851(6) A, alpha = 93.386(1) degrees, beta = 105.668(1) degrees, gamma = 91.339(1) degrees, Z = 1; Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O), monoclinic, space group P2(1)/c, a = 8.062(4) A, b = 6.940(3) A, c = 21.67(1), beta= 98.05(1) degrees, Z = 4.     

Preparation and solid-state characterization of mixed-ligand coordination/organometallic oligomers and polymers of copper(I) and silver(I) using diphosphine and mono- and diisocyanide ligands

The dimers [Cu(2)(dppm)(2)(CN-t-Bu)(3)](BF(4))(2) and [Ag(2)(dppm)(2)(CN-t-Bu)(2)](X)(2) (X(-) = BF(4)(-), ClO(4)(-)) and the coordination polymers [[M(diphos)(CN-t-Bu)(2)]BF(4)](n) (M = Cu, Ag; diphos = bis(diphenylphosphino)butane (dppb), bis(diphenylphosphino)pentane (dpppen), bis(diphenylphosphino)hexane (dpph)), [[Ag(2)(dppb)(3)(CN-t-Bu)(2)](BF(4))(2)](n), and [[Ag(dpppen)(CN-t-Bu)]BF(4)](n) have been synthesized and fully characterized as model materials for the mixed bridging ligand polymers which exhibit the general formula [[M(diphos)(dmb)]BF(4)](n) (M = Cu, Ag; dmb = 1,8-diisocyano-p-menthane) and [[Ag(dppm)(dmb)]ClO(4)](n). The identity of four polymers ([[Ag(dppb)(CN-t-Bu)(x)]BF(4)](n) (x = 1, 2), [[Ag(2)(dppb)(3)(CN-t-Bu)(2)](BF(4))(2)](n), [[Ag(dppm)(dmb)]ClO(4)](n)) and the two dimers has been confirmed by X-ray crystallography. The structure of [[Ag(dppm)(dmb)]ClO(4)](n) exhibits an unprecedented 1-D chain of the type "[Ag(dmb)(2)Ag(dppm)(2)(2+)](n)", where d(Ag(.)Ag) values between tetrahedral Ag atoms are 4.028(1) and 9.609(1) A for the dppm and dmb bridged units, respectively. The [[Ag(dppb)(CN-t-Bu)(x)]BF(4)](n) polymers (x = 1, 2) form zigzag chains in which the Ag atoms are tri- and tetracoordinated, respectively. The [[Ag(2)(dppb)(3)(CN-t-Bu)(2)](BF(4))(2)](n) polymer, which is produced from the rearrangement of [[Ag(dppb)(CN-t-Bu)(2)]BF(4)](n), forms a 2-D structure described as a "honeycomb" pattern, where large [Ag(dppb)(+)](6) macrocycles each hosting two counterions and two acetonitrile guest molecules are observed. Properties such as glass transition temperature, morphology, thermal decomposition, and luminescence in the solid state at 293 K are reported. The luminescence bands exhibit maxima between 475 and 500 nm with emission lifetimes ranging between 6 and 55 micros. These emissions are assigned to a metal-to-ligand charge transfer (MLCT) of the type M(I) --> pi(NC)/pi(PPh(2)).     

Formation and chemical reactivities of a new type of double-butterfly [[Fe2(mu-CO)(CO)6]2(mu-SZS-mu)]2-: synthetic and structural studies on novel linear and macrocyclic butterfly Fe/E (E=S,Se) cluster complexes

A new type of double-butterfly [[Fe(2)(mu-CO)(CO)(6)](2)(mu-SZS-mu)](2-) (3), a dianion that has two mu-CO ligands, has been synthesized from dithiol HSZSH (Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)), [Fe(3)(CO)(12)], and Et(3)N in a molar ratio of 1:2:2 at room temperature. Interestingly, the in situ reactions of dianions 3 with various electrophiles affords a series of novel linear and macrocyclic butterfly Fe/E (E=S, Se) cluster complexes. For instance, while reactions of 3 with PhC(O)Cl and Ph(2)PCl give linear clusters [[Fe(2)(mu-PhCO)(CO)(6)](2)(mu-SZS-mu)] (4 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)) and [[Fe(2)(mu-Ph(2)P)(CO)(6)](2)(mu-SZS-mu)] (5 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)), reactions with CS(2) followed by treatment with monohalides RX or dihalides X-Y-X give both linear clusters [[Fe(2)(mu-RCS(2))(CO)(6)](2)(mu-SZS-mu)] (6 a-e: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2), FeCp(CO)(2)) and macrocyclic clusters [[Fe(2)(CO)(6)](2)(mu-SZS-mu)(mu-CS(2)YCS(2)-mu)] (7 a-e: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2); Y=(CH(2))(2-4), 1,3,5-Me(CH(2))(2)C(6)H(3), 1,4-(CH(2))(2)C(6)H(4)). In addition, reactions of dianions 3 with [Fe(2)(mu-S(2))(CO)(6)] followed by treatment with RX or X-Y-X give linear clusters [[[Fe(2)(CO)(6)](2)(mu-RS)(mu(4)-S)](2)(mu-SZS-mu)] (8 a-c: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2)) and macrocyclic clusters [[[Fe(2)(CO)(6)](2)(mu(4)-S)](2)(mu-SYS-mu)(mu-SZS-mu)] (9 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2); Y=(CH(2))(4)), and reactions with SeCl(2) afford macrocycles [[Fe(2)(CO)(6)](2)(mu(4)-Se)(mu-SZS-mu)] (10 d: Z=CH(2)(CH(2)OCH(2))(3)CH(2)) and [[[Fe(2)(CO)(6)](2)(mu(4)-Se)](2)(mu-SZS-mu)(2)] (11 a-d: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)). Production pathways have been suggested; these involve initial nucleophilic attacks by the Fe-centered dianions 3 at the corresponding electrophiles. All the products are new and have been characterized by combustion analysis and spectroscopy, and by X-ray diffraction techniques for 6 c, 7 d, 9 b, 10 d, and 11 c in particular. X-ray diffraction analyses revealed that the double-butterfly cluster core Fe(4)S(2)Se in 10 d is severely distorted in comparison to that in 11 c. In view of the Z chains in 10 a-c being shorter than the chain in 10 d, the double cluster core Fe(4)S(2)Se in 10 a-c would be expected to be even more severely distorted, a possible reason for why 10 a-c could not be formed.     

Novel eclipsed 2D cadmium(II) coordination polymers with open-channel structure constructed from terephthalate and 3-(2-pyridyl)pyrazole: crystal structures, emission properties, and inclusion of guest molecules

Five new eclipsed two-dimensional (2D) coordination polymers, [[Cd(2)(TPT)(2)L(2)](GM(1))(3/2)(H(2)O)](infinity) (1) (TPT = terephthalate, L = 3-(2-pyridyl)pyrazole, GM(1) = terephthalic acid), [[Cd(TPT)L](GM(2))(H(2)O)(2)]( infinity) (2) (GM(2) = L = 3-(2-pyridyl)pyrazole), [[Cd(TPT)L](GM(3))(1/2)(H(2)O)](infinity) (3) (GM(3) = mesitylene), [[Cd(4)(TPT)(4)L(4)](GM(4))(7/2)](infinity) (4) (GM(4) = tetramethylbenzene), and [[Cd(TPT)L](GM(5))(1/2)](infinity) (5) (GM(5) = naphthalene), have been synthesized and characterized by X-ray diffraction. All the five complexes take the similar eclipsed 2D open-channel framework with different guest molecules included in the cavities of their channels. TGA analysis indicates that the eclipsed open-channel frameworks are thermally stable up to 300 degrees C. The porous property of the 2D framework of 5 was also investigated by the XRPD technique, which indicated that the guest molecules included in the open-channel frameworks are removable and the framework is maintained after the removal of the guest molecules. Moreover, complexes 1-5 also display strong blue emission in the solid state.     

3,3'-Bis(trisarylsilyl)-substituted binaphtholate rare earth metal catalysts for asymmetric hydroamination

Chiral 3,3'-bis(trisarylsilyl)-substituted binaphtholate rare earth metal complexes (R)-[Ln{Binol-SiAr3}(o-C6H4CH2NMe2)(Me2NCH2Ph)] (Ln = Sc, Lu, Y; Binol-SiAr3 = 3,3'-bis(trisarylsilyl)-2,2'-dihydroxy-1,1'-binaphthyl; Ar = Ph (2-Ln), 3,5-xylyl (3-Ln)) and (R)-[La{Binol-Si(3,5-xylyl)3}{E(SiMe3)2}(THF)2] (E = CH (4a), N (4b)) are accessible via facile arene, alkane, and amine elimination. They are efficient catalysts for the asymmetric hydroamination/cyclization of aminoalkenes, giving TOF of up to 840 h(-1) at 25 degrees C for 2,2-diphenyl-pent-4-enylamine (5c) using (R)-2-Y. Enantioselectivities of up to 95% ee were achieved in the cyclization of 5c with (R)-2-Sc. The reactions show apparently zero-order rate dependence on substrate concentration and first-order rate dependence on catalyst concentration, but rates depend on total amine concentrations. Activation parameters for the cyclization of pent-4-enylamine using (R)-2-Y (deltaH(S)(double dagger) = 57.4(0.8) kJ mol(-1) and deltaS(S)(double dagger) = -102(3) J K(-1) mol(-1); deltaH(R)(double dagger) = 61.5(0.7) kJ mol(-1) and deltaS(R)(double dagger) = -103(3) J K(-1) mol(-1)) indicate a highly organized transition state. The binaphtholate catalysts were also applied to the kinetic resolution of chiral alpha-substituted aminoalkenes with resolution factors f of up to 19. The 2,5-disubstituted aminopentenes were formed in 7:1 to > or = 50:1 trans diastereoselectivity, depending on the size of the alpha-substituent of the aminoalkene. Rate studies with (S)-1-phenyl-pent-4-enylamine ((S)-15e) gave the activation parameters for the matching (deltaH(double dagger) = 52.2(2.8) kJ mol(-1), deltaS(double dagger) = -127(8) J K(-1) mol(-1) using (S)-2-Y) and mismatching (deltaH(double dagger) = 57.7(1.3) kJ mol(-1), deltaS(double dagger) = -126(4) J K(-1) mol(-1) using (R)-2-Y) substrate/catalyst combination. The absolute configuration of the Mosher amide of (2S)-2-methyl-4,4-diphenyl-pyrrolidine and (2R)-methyl-(5S)-phenyl-pyrrolidinium chloride, prepared from (S)-15e, were determined by crystallographic analysis. Catalyst (R)-4a showed activity in the anti-Markovnikov addition of n-propylamine to styrene.     

On the road to a termolecular complex with acetone: a heterometallic supramolecular network [[Rh(2)(O(2)CCF(3))(4)].micro(2)-OCMe(2).[Cu(4)(O(2)CCF(3))(4)]

A novel heterometallic supramolecular network [[Rh(2)(O(2)CCF(3))(4)].micro(2)-OCMe(2).[Cu(4)(O(2)CCF(3))(4)]](2)( infinity ) has been prepared by codeposition of the volatile mono(acetone) adduct [Rh(2)(O(2)CCF(3))(4).eta(1)-OCMe(2)](2) and copper(I) trifluoroacetate, [Cu(4)(O(2)CCF(3))(4)]. The product is of interest from the viewpoints of gas-phase supramolecular synthesis and a rare bridging coordination mode of acetone. It has been fully characterized by IR and NMR spectroscopy, elemental analysis, and X-ray diffraction. An X-ray structure revealed a layered 2D arrangement of the heterometallic [[Rh(2)(O(2)CCF(3))(4)].micro(2)-OCMe(2).[Cu(4)(O(2)CCF(3))(4)]] units built by axial intermolecular interactions of the open electrophilic Rh(II) and Cu(I) centers and O-atoms of neighboring carboxylate groups. The coordination of the acetone molecules within the [[Rh(2)(O(2)CCF(3))(4)].micro(2)-OCMe(2).[Cu(4)(O(2)CCF(3))(4)]] unit is asymmetric with the Rh-O and Cu-O distances being 2.2173(15) and 2.7197(17) A, respectively. This work shows the potential of gas-phase deposition that may provide additional possibilities in supramolecular synthesis by utilizing intermolecular interactions and coordination bonds in a new way compared with conventional solution chemistry.     

Porous Cu-Cd mixed-metal-organic frameworks constructed from Cu(Pyac)2 [Bis[3-(4-pyridyl)pentane-2,4-dionato]copper(II)

Porous Cu-Cd mixed-metal-organic frameworks [[Cd(NO(3))(2)](2)[(Cu(Pyac)(2)](3)] (M'MOF 1) and [[CdCl(2)][Cu(Pyac)(2)](2)] (M'MOF2) [Cu(Pyac)(2) = bis[3-(4-pyridyl)pentane-2,4-dionato]copper(II)] have been synthesized by the reaction of Cu(Pyac)(2) with Cd(NO(3))(2) and CdCl(2). They are noninterpenetrating 1D ladder and 2D square-grid frameworks, constructed from Cu(Pyac)(2) building blocks with T-shaped Cd(NO(3))(2) nodes and square-planar CdCl(2) nodes, respectively. The 1D ladders and 2D square grids are stacked in ABCABC... and ABCDEF... packings, leading to 2D interconnected channels of ca. 5.7 x 10.2 and 4.1 x 9.8 A in 1 and 1D channels of ca. 8.0 x 8.2 A in 2, respectively. The copper sites in these two M'MOFs are coordinated by solvent molecules and exposed to the pores.     

Synthesis, structures, and reactivity of weakly coordinating anions with delocalized borate structure: the assessment of anion effects in metallocene polymerization catalysts.

The formation of adducts of tris(pentafluorophenyl)borane with strongly coordinating anions such as CN(-) and [M(CN)(4)](2)(-) (M = Ni, Pd) is a synthetically facile route to the bulky, very weakly coordinating anions [CN[B(C(6)F(5))(3)](2)](-) and [M[CNB(C(6)F(5))(3)](4)](2-) which are isolated as stable NHMe(2)Ph(+) and CPh(3)(+) salts. The crystal structures of [CPh(3)][CN[B(C(6)F(5))(3)](2)] (1), [CPh(3)][ClB(C(6)F(5))(3)] (2), [NHMe(2)Ph](2)[Ni[CNB(C(6)F(5))(3)](4)].2Me(2)CO (4b.2Me(2)CO), [CPh(3)](2)[Ni[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (4c.2CH(2)Cl(2)), and [CPh(3)](2)[Pd[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (5c.2CH(2)Cl(2)) are reported. The CN stretching frequencies in 4 and 5 are shifted by approximately 110 cm(-1) to higher wavenumbers compared to the parent tetracyano complexes in aqueous solution, although the M-C and C-N distances show no significant change on B(C(6)F(5))(3) coordination. Zirconocene dimethyl complexes L(2)ZrMe(2) [L(2) = Cp(2), SBI = rac-Me(2)Si(Ind)(2)] react with 1, 4c or 5c in benzene solution at 20 degrees C to give the salts of binuclear methyl-bridged cations, [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] and [(L(2)ZrMe)(2)(mu-Me)](2)[M[CNB(C(6)F(5))(3)](4)]. The reactivity of these species in solution was studied in comparison with the known [[(SBI)ZrMe](2)(mu-Me)][B(C(6)F(5))(4)]. While the latter reacts with excess [CPh(3)][B(C(6)F(5))(4)] in benzene to give the mononuclear ion pair [(SBI)ZrMe(+).B(C(6)F(5))(4)(-)] in a pseudo-first-order reaction, k = 3 x 10(-4) s(-1), [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] reacts to give a mixture of L(2)ZrMe(mu-Me)B(C(6)F(5))(3) and L(2)ZrMe(mu-NC)B(C(6)F(5))(3). Recrystallization of [Cp' '(2)Zr(mu-Me)(2)AlMe(2)][CN[B(C(6)F(5))(3)](2)] affords Cp' '(2)ZrMe(mu-NC)B(C(6)F(5))(3) 6, the X-ray structure of which is reported. The stability of [(L(2)ZrMe)(2)(mu-Me)](+)X(-) decreases in the order X = [B(C(6)F(5))(4)] > [M[CNB(C(6)F(5))(3)](4)] > [CN[B(C(6)F(5))(3)](2)] and increases strongly with the steric bulk of L(2) = Cp(2) < SBI. Activation of (SBI)ZrMe(2) by 1 in the presence of AlBu(i)(3) gives extremely active ethene polymerization catalysts. Polymerization studies at 1-7 bar monomer pressure suggest that these, and by implication most other highly active ethene polymerization catalysts, are strongly mass-transport limited. By contrast, monitoring propene polymerization activities with the systems (SBI)ZrMe(2)/1/AlBu(i)(3) and CGCTiMe(2)/1/AlBu(i)(3) at 20 degrees C as a function of catalyst concentration demonstrates that in these cases mass-transport limitation is absent up to [metal] approximately 2 x 10(-5) mol L(-1). Propene polymerization activities decrease in the order [CN[B(C(6)F(5))(3)](2)](-) > [B(C(6)F(5))(4)](-) > [M[CNB(C(6)F(5))(3)](4)](2-) > [MeB(C(6)F(5))(3)](-), with differences in activation barriers relative to [CN[B(C(6)F(5))(3)](2)](-) of DeltaDeltaG = 1.1 (B(C(6)F(5))(4)(-)), 4.1 (Ni[CNB(C(6)F(5))(3)](4)(2-)) and 10.7-12.8 kJ mol(-)(1) (MeB(C(6)F(5))(3)(-)). The data suggest that even in the case of very bulky anions with delocalized negative charge the displacement of the anion by the monomer must be involved in the rate-limiting step.     

Novel luminescent mixed-metal Pt-Tl-alkynyl-based complexes: the role of the alkynyl substituent in metallophilic and eta2(pi...Tl)-bonding interactions

A novel series of [PtTl(2)(C[triple chemical bond]CR)(4)](n) (n = 2, R = 4-CH(3)C(6)H(4) (Tol) 1, 1-naphthyl (Np) 2; n = infinity, R = 4-CF(3)C(6)H(4) (Tol(F)) 3) complexes has been synthesized by neutralization reactions between the previously reported [Pt(C[triple chemical bond]CR)(4)](2-) (R = Tol, Tol(F)) or novel (NBu(4))(2)[Pt(C[triple chemical bond]CNp)(4)] platinum precursors and Tl(I) (TlNO(3) or TlPF(6)). The crystal structures of [Pt(2)Tl(4)(C[triple chemical bond]CTol)(8)]4 acetone, 14 acetone, [Pt(2)Tl(4)(C[triple chemical bond]CNp)(8)]3 acetone1/3 H(2)O, 23 acetone 1/3 H(2)O and [[PtTl(2)(C[triple chemical bond]CTol(F))(4)](acetone)S](infinity) (S = acetone 3 a; dioxane 3 b) have been solved by X-ray diffraction studies. Interestingly, whereas in the tolyl (1) and naphthyl (2) derivatives, the thallium centers exhibit a bonding preference for the electron-rich alkyne entities to yield crystal lattices based on sandwich hexanuclear [Pt(2)Tl(4)(C[triple chemical bond]CR)(8)] clusters (with additional Tlacetone (1) or Tlnaphthyl (2) secondary interactions), in the C(6)H(4)CF(3) (Tol(F)) derivatives 3 a and 3 b the basic Pt(II) center forms two unsupported Pt-Tl bonds. As a consequence 3 a and 3 b form an extended columnar structure based on trimetallic slipped PtTl(2)(C[triple chemical bond]CTol(F))(4) units that are connected through secondary Tl(eta(2)-acetylenic) interactions. The luminescent properties of these complexes, which in solution (blue; CH(2)Cl(2) 1,2; acetone 3) are very different to those in solid state (orange), have been studied. Curiously, solid-state emission from 1 is dependent on the presence of acetone (green) and its crystallinity. On the other hand, while a powder sample of 3 is pale yellow and displays blue (457 nm) and orange (611 nm) emissions, the corresponding pellets (KBr, solid) of 3, or the fine powder obtained by grinding, are orange and only exhibit a very intense orange emission (590 nm).     

Stabilization of the P(CF(3))(2)(-) ion as a reversible CS(2) adduct, [P(CF(3))(2)CS(2)](-), and its potential use as a nucleophilic P(CF(3))(2)(-) source: synthesis and structure of [18-crown-6-K][P(C(6)F(5))(2)CS(2)

The bis(trifluoromethyl)phosphanide ion, P(CF(3))(2)(-), decomposes slowly above -30 degrees C in CH(2)Cl(2) and THF solution. An increase of the thermal stability of the P(CF(3))(2)(-) moiety is observed if excess CS(2) is added. The P(CF(3))(2)(-) moiety is stabilized because of the formation of the bis(trifluoromethyl)phosphanodithioformate anion. Solutions of a [P(CF(3))(2)CS(2)](-) salt still act as a source of P(CF(3))(2)(-), even in the presence of excess of CS(2). The stable compound [18-crown-6-K][P(CF(3))(2)CS(2)] was characterized by multinuclear NMR spectroscopy, elemental analysis, and vibrational spectroscopy in combination with quantum chemical calculations. The thermally unstable P(C(6)F(5))(2)(-) ion decomposes even at -78 degrees C in solution giving polymeric material. The intermediate formation of the bis(pentafluorophenyl)phosphanide anion in the presence of excess of CS(2) allows the isolation of [18-crown-6-K][P(C(6)F(5))(2)CS(2)]. The novel compound crystallizes with one solvent molecule CH(2)Cl(2) in the monoclinic space group P2(1)/n with a = 1151.8(1) pm, b = 1498.1(2) pm, c = 2018.2(2) pm, beta = 102.58(1) degrees, and Z = 4. Optimized geometric parameters of the [P(C(6)F(5))(2)CS(2)](-) ion at the B3PW91/6-311G(d) level of theory are in excellent agreement with the experimental values.     

Gold-thallium supramolecular arrays with 4,4'-bipyridine. Solvent induction of luminescent networks

The reaction of [AuTl(C(6)Cl(5))(2)](n) with bipy at different molar ratios, solvents or crystallisation conditions affords a series of two- and three-dimensional luminescent complexes, [AuTl(C(6)Cl(5))(2)(bipy)(0.5)](n), [AuTl(C(6)Cl(5))(2)(bipy)](n), [[Tl(bipy)][Tl(bipy)(0.5)(THF)][Au(C(6)Cl(5))(2)](2)](n), [[Tl(bipy)][Tl(bipy)(0.5)(THF)][Au(C(6)Cl(5))(2)](2)xTHF](n) and [[AuTl(C(6)Cl(5))(2)(bipy)]x0.5toluene](n)(bipy = 4,4'-bipyridine; THF = tetrahydrofuran) all of them containing polymeric chains formed via unsupported Au...Tl interactions and bridging bipyridine ligands.