基于磁性分子印迹聚合物的电化学传感器的研究进展

分子印迹聚合物与磁性纳米材料结合,制备成磁性分子印迹纳米敏感膜,这样做不仅可以发挥分子印迹聚合材料的优势,而且磁性纳米粒子可有效提高电化学传感器的灵敏度、稳定性以及生物相容性等.近年来将磁性分子印迹纳米敏感膜应用于电化学传感器制备成的磁性分子印迹电化学传感器得到了较快的发展.本文就近5年来磁性分子印迹电化学传感器敏感膜...     

分子印迹膜电化学传感器检测土壤中莠去津

本文报道了一种对莠去津有识别特性的分子印迹膜的制备,即在含和不含模板分子(莠去津)的情况下,通过循环伏安技术在金电极表面沉积2-巯基苯并咪唑,制备了2-巯基苯并咪唑聚合膜.利用循环伏安法对印迹和非印迹膜行为进行了评价,对分子印迹膜的影响因素进行了筛选和优化.实验表明,该分子印迹膜对莠去津具有良好的选择性和灵敏度.莠去津的还原峰电流与莠去津的浓度在 1.2 ×10 - 8mal/L～8.0 ×10 - 5mol/ L 范围内具有良好的线性关系( r=0.99862),检出限可达 3.0 ×10 - 9mol/ L.将此传感器用于土壤中莠去津的测定,回收率在90.8% ～ 98.2%之间,取得了很好的结果.     

Sensitive and selective molecularly imprinted electrochemical sensor based on multi-walled carbon nanotubes for doxycycline hyclate determination

An electrochemical sensor for doxycycline hyclate(DC)detection with high sensitivity and good selectivity is reported.The sensor was fabricated by electro-polymerization of molecularly imprinted polymers(MIPs)in the presence of DC onto multi-walled carbon nanotubes modified glassy carbon electrode(MWCNTs/GCE).The MWCNTs can significantly increase the current response of the sensor,leading to enhanced sensitivity.The MIPs provide selective recognition sites for DC detection.The experimental parameters,such as the polymer monomer concentration,supporting electrolyte pH,the time for electro-polymerization and the incubation time of the sensor with DC were optimized.Under optimized experimental conditions,the sensor displayed a linear range of 0.05μmol/L-0.5μmol/L towards DC detection,with the detection limit of 1.3×10^-2μmol/L.The sensor was successfully applied for recovery test of DC in human serum samples.     

三聚氰胺磁性分子印迹聚合物材料的制备及性能表征

利用溶剂热法通过控制反应时间和温度制得了分散性好和磁性强的Fe3O4,并利用溶胶凝胶法制备得到包覆SiO2的磁性微球(Fe3O4@SiO2)。以三聚氰胺为模板分子,甲基丙烯酸(MAA)为单体,采用本体聚合法制备了磁性分子印迹聚合物(MMIPs)。通过静态吸附实验表明,MMIPs对三聚氰胺的饱和吸附量高达10.22μg/mg,是磁性非印迹聚合物(MNIPs)的1.62倍。粒子扩散模型、Elovich模型和动态吸附实验表明所制得的MMIPs有较好的吸附性能。     

表面分子印迹材料的制备及在生物分子分离分析中的应用

表面分子印迹技术是一种新型的分子印迹技术,其解决了传统印迹方法得到的印迹聚合物模板结合位点少、洗脱困难、色谱性能和机械性能差等问题。表面分子印迹聚合物(SMIPs)以其稳定性好、特异性高及实用性强的特点,近年来在生物分子分离分析中的应用引起人们的关注。本文介绍了SMIPs的制备方法,比较了不同方法的优缺点,并对其在生物大分子、生物小分子及微生物分子分离分析中的应用进行了综述。     

盐酸雷尼替丁印迹聚合物膜电极的制备与应用

研究了盐酸雷尼替丁印迹聚合物离子选择性电极的制备、特性及应用。该电极在1.0×10-5～1.0×10-2mol/L范围内表现能斯特响应,斜率为-28.18mV/pC,检测下限为5.2×10-6mol/L,原料回收率为96.8%～104.6%。该电极与先前报道的电极相比,具有更高的选择性、灵敏性和抗干扰性。利用该电极对雷尼替丁原料、胶囊含量进行了测定,结果与药典法一致。     

A new enzyme model for enantioselective esterases based on molecularly imprinted polymers

An efficient enzyme model exhibiting enantioselective esterase activity was prepared by using molecular imprinting techniques. The enantiomerically pure phosphonic monoesters 4 L and 5 L were synthesized as stable transition-state analogues. They were used as templates connected by stoichiometric noncovalent interactions to two equivalents of the amidinium binding site monomer 1. After polymerization and removal of the template, the polymers were efficient catalysts for the hydrolysis of certain nonactivated amino acid phenylesters (2 L, 2 D, 3 L, 3 D) depending on the template used. Imprinted catalyst IP4 (imprinted with 4 L) enhanced the hydrolysis of the corresponding substrate 2 L by a factor of 325 relative to that of a buffered solution. Relative to a control polymer containing the same functionalities, prepared without template 4 L, the enhancement was still about 80-fold, showing the highest imprinting effect up to now. In cross-selectivity experiments a strong substrate selectivity of higher than three was found despite small differences in the structure of the substrate and template. Plots of initial velocities of the hydrolysis versus substrate concentration showed typical Michaelis-Menten kinetics with saturation behavior. From these curves, the Michaelis constant K(M) and the catalytic constant k(cat) can be calculated. The enantioselectivity shown in these values is most interesting. The ratio of the catalytic efficiency k(cat)/K(M), between the hydrolysis of 2 L- and 2 D-substrate with IP4, is 1.65. This enantioselectivity derives from both selective binding of the substrate (K(M)L/K(M)D=0.82), and from selective formation of the transition state (k(cat)L/k(cat)D=1.36). Thus, these catalysts give good catalysis as well as high imprinting and substrate selectivity. Strong competitive inhibition is caused by the template used in imprinting. This behavior is also quite similar to the behavior of natural enzymes, for which these catalysts are good models.     

A sensitive electrochemical sensor modified with multi‐walled carbon nanotubes doped molecularly imprinted silica nanospheres for detecting chlorpyrifos

A highly sensitive and convenient electrochemical sensor, based on surface molecularly imprinted polymers and multiwalled carbon nanotubes, was successfully developed to detect chlorpyrifos in real samples. In order to solve the problems like uneven shapes, poor size accessibility, and low imprinting capacity, the layer of the molecularly imprinted polymer was prepared on the surface of silica nanospheres. Moreover, the doping of multiwalled carbon nanotubes greatly improved the electrical properties of developed sensor. Under the optimal conductions, the electrochemical response of the sensor is linearly proportional to the concentration of chlorpyrifos in the range of 5.0 × 10^?12‐5.0 × 10^?8 mol/L with a low detection limit of 8.1 × 10^?13 mol/L. The prepared sensor exhibited multiple advantages such as low cost, simple preparation, convenient use, excellent selectivity, and good reproducibility. Finally, the prepared sensor was successfully used to detect chlorpyrifos in vegetable and fruit.     

Signaling molecularly imprinted polymers: molecular recognition-based sensing materials

Molecular imprinting is a template polymerization technique that can easily provide synthetic polymers capable of molecular recognition for given target molecules. In addition to their highly specific recognition ability, we are attempting to introduce signaling functions to molecularly imprinted polymers, enabling them to respond according to specific binding events. Some of our work regarding such signaling molecularly imprinted polymers is presented here, including molecularly imprinted polymers that induce spectral shifts of target compounds because of binding. Such compounds include hydrogen-bonding-based fluorescent imprinted polymers and metalloporphyrin-based signaling molecularly imprinted polymers.     

Preparation and recognition performance of ratio-fluorescent probe based on sulfadiazine imprinted polymersEI北大核心CSCD

A novel ratio-fluorescent probe based on molecular imprinting polymer ( MIP) for the detection of sulfadiazine was prepared by using nitrogen-doped carbon quantum dots (N-CQDs) as the fluorescence response signal, silica-embedded cadmium telluride quantum dots ( CdTe QDs) as the fluorescence reference signal, sulfadiazine ( SDZ) as template molecule, acrylamide as functional monomer, N, N-methyl bisacrylamide as crosslinking agent and 2,2-Azobisisobutyronitrile as initiator. The results showed that the probe has a core-shell structure and fluorescence sensitive to SDZ, by the characterization of scanning electron microscopy, transmission electron microscopy, and fluorescence spectrophotometer. Under the wavelength of 360 nm, the ratio-fluorescent signal of probe showed a linear response with SDZ concentration in the range of 0-100 μmol / L with the detection limit of 11 nmol / L. Also, the ratio-fluorescent probe was applied to the detection of SDZ with a recovery of 92. 0%-95. 1% and relative standard deviation (RSD) of 3. 6% in real water samples. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

Shielded molecularly imprinted polymers prepared with a selective surface modification

Uniformly sized, molecularly imprinted polymers (MIPs) of bisphenol A (BPA), one of many potential endocrine disruptors, were prepared by selective surface modification and immobilized at intervals of functional monomers with 4,4′‐methylenebisphenol as a pseudotemplate. MIPs for BPA were prepared with 4‐vinyl pyridine immobilized at the most effective interval and with ethylene glycol dimethacrylate monomer as a functional crosslinker. The prepared MIPs were surface‐modified with both polar and ionic monomers with different modification methods and then evaluated to reveal their selectivity and retention characteristics. Some of the modified MIPs showed significant selectivity for BPA retention when they were used as high‐performance liquid chromatography (HPLC) stationary phases, in comparison with ordinary MIPs. This effect of molecular imprinting was retained even after the surface modification of MIPs. The MIPs employed as pretreatment media for a column‐switching HPLC system provided a detection limit as low as 1 ng/L (ppt) by electrochemical detection. Actual samples, including Suwannee River natural organic matter (NOM), were analyzed for BPA, and BPA was quantitatively detected in NOM even with the combination with widely used UV detection because of the effective removal of interference afforded by an effective surface modification of the MIPs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2048–2060, 2005     

槲皮素表面分子印迹聚合物的制备及其应用研究

以接枝双键的凹凸棒土(TM)为载体,槲皮素为模板分子,采用表面印迹技术制备对槲皮素具有特异吸附性能的分子印迹聚合物(MIP)。利用光谱法选择实验条件及对化合物表征。采用静态法研究聚合物对槲皮素的结合性能与识别性能。结果表明,该分子印迹材料对槲皮素具有特异的识别特性和优良的亲和性,提高了传统聚合物的结合率。以该印迹聚合物为固相萃取材料,结合高效液相色谱法,对白菜中的槲皮素进行分离富集,方法回收率为84.0%~90.6%,相对标准偏差低于5.6%。     

A novel sensor based on multi-walled carbon nanotubes and boron-doped double-layer molecularly imprinted membrane for the analysis of SCZ in pharmaceutical and biological samples

ABSTRACT

A molecularly imprinted electrochemical sensor for the rapid detection of the anti-parasitic drug Secnidazole (SCZ) is reported. In this work, the build electrochemical sensor was based on a carbon paste electrode (CPE) modified with multi-wall carbon nanotubes (MWCNTs) and boron-embedded duplex molecularly imprinted composite membranes (B-DMICMs), that significantly increased the efficiency of the sensor for the detection of template molecule SCZ. Density functional theory (DFT) was employed to study the interactions between the template and monomers to select appropriate functional monomers for rational design of the B-DMICMs.The optimal experimental conditions were optimised for the factors affecting the performance of the sensor. Under the optimal conditions, the reduction peak currents of SCZ by differential pulse voltammetry increased linearly with SCZ concentration in the range from 3.0 × 10^?4 to 1.0 × 1.0^?6 mol L^?1 and 1.0 × 1.0^?6 to 1.91 × 10^?8 mol L^?1 with a detection limit of 1.72 × 10^?8 mol L^?1 for secnidazole, which is significantly lower than those in the currently used methods and in previous reports. This method offers low cost, sensitive and effective determination of SCZ and can potentially be used for detection of SCZ in pharmaceutical and biological samples with good precision and accuracy.     

马尿酸分子印迹电化学传感器的制备及应用

采用超声法制备g-C3N4/NiO复合催化材料,将其滴涂在玻碳电极(GCE)表面构建g-C3N4/NiO/GCE催化电极。采用电聚合方法,以马尿酸为模板分子,邻苯二胺为功能单体构建M IP/g-C3N4/NiO/GCE传感器。采用时间-电流法对传感器制备条件优化。结果表明,复合催化材料对H2O2具有良好的催化效果。分子印迹传感器对马尿酸具有良好的选择性。在优化条件下,马尿酸质量浓度在0.05~2 mg/L范围内,电极电流响应与浓度呈良好的线性关系,检出限为7.1μg/L。将电极用于尿液中马尿酸的检测,回收率在87.3%~95.3%之间。     

分子印迹聚合物选择性富集长春碱的研究

分子印迹聚合物(MIPs)是近年来发展起来的一种对特定分子(模板分子)具有高度选择性的合成高分子材料.本文以长春碱(VLB)为模板分子,以甲基丙烯酸(MAA)为功能单体、乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,在偶氮二异丁腈(AIBN)的引发下制备了长春碱印迹聚合物(VLB-MIP).采用紫外光谱对VLB与MAA之间形成的模板-功能单体复合物进行了分析,通过扫描电镜(SEM)对制备的VLB-MIP的表面形态进行了表征,并用BET法对MIP表面的孔径进行了测定.结果表明,VLB-MIP与未加模板分子制备的非印迹聚合物(NIP)相比表面多孔、粗糙,比表面积显著增加.以VLB-MIP作为固相萃取(SPE)的吸附剂,对VLB-MIP的选择性进行了评价,VLB-MIP能特异性地吸附VLB,而对VLB的结构类似物长春新碱(VCR)却没有表现出明显的吸附行为.将长春花提取物上样于填充VLB-MIP的SPE柱上,在最优实验条件下,长春花提取物中的VLB能被高效富集.此外,上样溶剂对MIP柱的吸附容量有影响,长春花提取物溶于非极性溶剂甲苯时,MIP的吸附容量最大为750μg/g,其次是氯仿吸附容量为625μg/g,最小的是甲醇为250μg/g.     

多壁碳纳米管-分子印迹传感器测定盐酸克伦特罗

结合碳纳米材料和分子印迹技术,建立了以K3[Fe(CN)6]为探针测定盐酸克伦特罗的方法。以邻苯二胺为功能单体,盐酸克伦特罗为模板,采用电化学聚合法在多壁碳纳米管修饰电极表面制备了分子印迹薄膜。用乙腈水溶液可快速去除模板,得到多壁碳纳米管-分子印迹传感器。用循环伏安法、交流阻抗法和石英晶体微天平技术对印迹膜进行了表征,膜厚为12.3 nm。K3[Fe(CN)6]的相对峰电流与盐酸克伦特罗的浓度在4.0×10-8～6.6×10-6 mol/L范围内呈线性关系,检测限为8.1×10-9 mol/L。选择性实验表明传感器对结构类似物具有较强的抗干扰能力。此传感器可用于猪肉中盐酸克伦特罗的测定,加标回收率为101.3%～107.9%。     

A novel voltammetric sensor for ascorbic acid based on molecularly imprinted poly(o-phenylenediamine-co-o-aminophenol)

A molecularly imprinted copolymer, poly(o-phenylenediamine-co-o-aminophenol) (PoPDoAP), was prepared as a new ascorbic acid (AA) sensor. The copolymer was synthesized by incorporation of AA as template molecules during the electrochemical copolymerization of o-phenylenediamine and o-aminophenol, and complementary sites were formed after the copolymer was electrochemically reduced in ammonium aqueous solution. The molecularly imprinted copolymer sensor exhibited a high sensitivity and selectivity toward AA. Differential pulse voltammograms (DPVs) showed a linear concentration range of AA from 0.1 to 10 mM, and the detection limit was calculated to be 36.4 μM. Compared to conventional polyaniline-based AA sensors, the analytical performance of the imprinted copolymer sensor was improved due to the broadened usable pH range of PoPDoAP (from pH 1.0 to pH 8.0). The sensor also exhibited a good reproducibility and stability. And it has been successfully applied in the determination of AA in real samples, including vitamin C tablet and orange juices, with satisfactory results.     

Characterization of molecularly imprinted polymers employing crosslinkers with nonsymmetric polymerizable groups

Crosslinking monomers have been developed with a combination of methacrylamide and methacrylate or vinyl ketone polymerizable groups that provide molecularly imprinted polymers (MIPs) with improved binding and selectivity. The differential reactivity rates of the polymerizable groups prompted an investigation into the time‐dependent behavior of the crosslinkers, which suggests a new mechanism for MIP formation. The mechanism involves the formation of long sections of linear poly(vinyl ketone) with pendant methacrylamide groups that form a highly crosslinked network in a subsequent step. This has implications for the sequence morphology of polymers, affecting the structure and improving the binding properties of MIPs. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3668–3675, 2004     

Multiwalled carbon nanotube based ion imprinted polymer as sensor and sorbent for environmental hazardous cobalt ion

By using molecular imprinting approach, a highly selective multiwalled carbon nanotube based electrochemical sensor for Co(II) ion was fabricated. The sites for binding of Co(II) ion was created with cobalt ion as template, NNMBA-crosslinked polyacrylic acid as the solid polymer matrix which is coated on functionalized MWCNTs. For the comparison, system without template was also created (MWCNT-NIP). In order to check the importance of MWCNTs, imprinted (IIP) and non-imprinted (NIP) polymer without MWCNTs were also produced. The developed systems were successfully characterized by different analytical techniques. The selectivity of the systems was checked with different metal ions. The electrochemical response of the nanostructures modified platinum electrode were investigated and optimized. The MWCNT-IIP/Co/PE exhibit fast sensing and high selectivity towards Co(II) ion. The detection limit of the sensor was explored with differential pulse voltammetry and it was found to be at 1.01 × 10^?5µM. The practical applicability of the sensor was successfully applied for the trace sensing and extraction of Co(II) ion from real samples such as fertilizer and battery. The recoveries of Co(II) ion from the samples were very high, that revealed the efficiency of the systems for environmental applications.