Improved nematic mesophase stability of benzoxazole-liquid crystals via modification of inter-ring twist angle of biphenyl unit

A series of nematic heterocyclic liquid crystals, 2-(2?-fluoro-4?-alkoxy-1,1?-biphenyl-4-yl)-benzoxazole derivatives (coded as nPF(2)PBx) bearing hydrogen (nPF(2)PBH), methyl (nPF(2)PBM) and nitro (nPF(2)PBN) terminal groups, respectively, are developped and investigated. The results show that the nematic mesophase stability is obviously improved via a slightly increase in the inter-ring twist angle between the planes of two phenyl rings in the biphenyl unit, where modification of the twist angle can be achieved by adjusting the position of the lateral monofluorine substituent from the outer to the inter ring of the biphenyl mesogenic core unit. Meanwhile, the inter-ring lateral fluorine substituent results in a decrease in both melting and clearing points but only a nematic mesophase with an acceptably wide mesophase range for nPF(2)PBx, and thus a potential application in liquid crystal display mixtures is expected, especially for the compounds nPF(2)PBM and nPF(2)PBN. The reduced π–π interaction/conjugation caused by the increased twist angle is considered as one of the possible reasons for the formation of a nematic mesophase.     

Preparation and properties of lateral monofluoro-substituted benzoxazole-based mesogenic compounds

A series of 2-(3?-fluoro-4?-alkoxy-1,1?-biphenyl-4-yl)-benzoxazole liquid crystals (coded as nPF(3)PBx) were prepared, where a lateral fluorine substituent, as well as methyl, chlorine and nitro terminal groups, was introduced into the molecules to investigate the effects of different polar substituents on the liquid crystal properties. The mesomorphic and photophysical properties were investigated. The results show that compounds nPF(3)PBx have enantiotropic mesophases; meanwhile, they exhibit UV–vis absorption bands with maxima at 323–326 nm and photoluminescence emission peaks at 389–395 nm, respectively. It is noted that nPF(3)PBx with terminal polar groups or electron-withdrawing groups (NO₂, Cl) display higher clearing temperatures and wider mesophase range than those of the corresponding homologues with terminal non-polar groups or electron-donating groups (CH₃, H). Meanwhile, compared with two lateral fluorine-substituted analogues containing 3,5-difluorophenyl unit, lateral monofluoro-substituted nPF(3)PBx display enhanced mesophase range both in heating and cooling except for terminal methyl-substituted compounds, as well as show obvious red-shifted UV–vis absorption bands and photoluminescence emission, which are attributed to the enhanced dipole–dipole interaction caused by increased dipole moment.     

Preparation and characterisation of laterally monofluorinated mesogenic benzimidazole-based compounds

Series of laterally monofluorinated compounds, 2-(4?-alkoxy-3-fluorobiphenyl-4-yl)-1H-benzimidazole derivatives (nPPF(3)Mx) bearing different substituents (H, CH₃, NO₂, coded as nPPF(3)MH, nPPF(3)MM and nPPF(3)MN, respectively) at 5-position, were prepared and their structures were characterised. According to the results from differential scanning calorimetry and polarising optical microscopy, the present compounds nPPF(3)Mx exhibit enantiotropic smectic mesophases, for which the mesophase ranges are 13–67 and 47–111°C on heating and cooling for nPPF(3)MH, 84–112 and 126–154°C for nPPF(3)MM, and 23–102 and 49–117°C for nPPF(3)MN, respectively. Compared to non-fluorinated analogues, monofluorinated nPPF(3)Mx have low melting/clearing points and display enhanced mesophase range both in heating and cooling, which are attributed to the disruption of the side-to-side intermolecular packing caused by the ortho lateral fluoro substituents and the increased dipole–dipole interaction between the polar fluoro-substituted molecules, respectively. It is noted that nPPF(3)MM and nPPF(3)MN show a much wider mesophase range than nPPF(3)MH, which suggest that the substituent at benzimidazole moiety can improve the mesophase stability.     

Synthesis and mesomorphic properties of the nematic mesophase benzoxazole derivatives with big twist angle of difluoro-biphenyl unit

Modifying the position and numbers of lateral fluorine substituent is a common method to design and adjust the mesophase of liquid crystal compounds. Here, a series of 2-(2,2?-difluoro-4?-alkoxy-1,1?-biphenyl-4-yl)-5-substituted benzoxazole with both non-polar (H, CH₃) and polar (NO₂) groups (coded as nPF(2)PF(2)Bx) is synthesised and characterised. All of the compounds show a conspicuous inter-ring twist angle of 38° compared with corresponding reference compounds I and II which are calculated by density functional theory method, and it is interesting to note that the final compounds nPF(2)PF(2)Bx show only nematic mesophase during heating or cooling. Meanwhile, the UV-vis absorption bands and photoluminescence emission peaks both display remarkable blue-shifted. The aforementioned results reveal that lateral difluoro substituents play a key role to stable the nematic mesophase by increasing the dihedral angle of biphenyl.     

Search for nematic biaxiality in bent-core mesogens: an X-ray diffraction perspective

ABSTRACT

Since its theoretical prediction in 1970, the search for the biaxial nematic phase in thermotropic systems has challenged generations of liquid crystal scientists. Over the last 10 years, bent-core mesogens have drawn much interest as promising candidates for nematic biaxiality. However, despite a number of disputed claims, conclusive evidence of proper (spontaneous and macroscopic) biaxial order in these materials is still missing. By contrast, it is now widely recognised that biaxiality exists on a local scale, in the form of nano-sized clusters of molecules (cybotactic groups) possessing smectic-like positional order and biaxial orientational order. This article provides a review of X-ray diffraction studies on biaxiality and cybotaxis in bent-core nematics, discussing the most relevant issues related to this research field.     

Synthesis and mesomorphic properties of benzoxazole derivatives with lateral multifluoro substituents

Fluorinated aromatics is generally chosen as mesogenic cores to design novel liquid crystal compounds. Here, a series of benzoxazole derivatives with laterally multifluorinated biphenyl units, 2-(3′,3-difluoro ?4′-alkoxy-1,1′-biphenyl-4-yl)-benzoxazole derivatives (coded as nPF(3)PF(3)Bx), are synthesized and characterized, where methyl and nitro moieties are selected as terminal groups to investigate the effects of different polar substituents on the liquid crystal properties. The compounds nPF(3)PF(3)Bx show enantiotropic mesophases with mesophase ranges of 0–40°C and 0–63°C on heating and cooling for hydrogen-terminated derivatives (nPF(3)PF(3)BH), 43–93°C and 54–123°C for methyl-terminated ones (nPF(3)PF(3)BM), 60–108°C and 74–152°C for nitro terminated ones (nPF(3)PF(3)BN), respectively. They exhibit photoluminescence emission peaks at 390–392 nm and UV–vis absorption bands with maxima at 327–330 nm, respectively. The results reveal that lateral multifluoro substituents lead to a decrease in melting/clearing points, while electron-withdrawing terminal nitro moiety results in increases in both melting point and mesophase range.     

Nematic mesophase enhanced via lateral monofluorine substitution on benzoxazole-liquid crystals

Fluorine is widely used as a lateral substituent to modify the physical properties of liquid crystals. Here, laterally monofluorinated compounds, 2-(4?-alkoxy-2-fluorobiphenyl-4-yl)-benzoxazole derivatives (nPPF(2)Bx) bearing different substituents (H, CH₃, NO₂, coded as nPPF(2)BH, nPPF(2)BM and nPPF(2)BN, respectively) at 5-position, were synthesised and characterised. It is interesting to note that these only display enantiotropic nematic mesophases with mesophase ranges of 12–28°C and 13–45°C on heating and cooling for nPPF(2)BH, 46–97°C and 62–120°C for nPPF(2)BM and 82–108°C and 87–113°C for nPPF(2)BN, which are very different from the corresponding monofluorine-substituted analogue (compounds I) with enantiotropic smectic or smectic/nematic mesophases. The enhanced nematic mesophase is attributed to the reduced π–π interaction/conjugation resulting from the twisted structure of the molecule caused by the introduction of a fluorine atom into the inter-ring of the biphenyl unit. These results suggest that modification of the monofluorine substituent position is an effective method to improve the nematic mesophase in benzoxazole-liquid crystals.     

W-shaped mesogens and variations of their molecular structure

New bent-core liquid crystalline dimers with W-shaped molecular geometry have been prepared and studied. We have modified the dimer shape by variation of the connecting part between two bent-core units and changing the terminal chains (perfluoroalkyl, siloxanealkyl). Additionally, we have altered the inner bend angle value (120°, 60° and 148°) by utilization of different aromatic units. Mesomorphic properties of new dimers were established based on the texture observation in the polarizing microscope and DSC measurements. Moreover, x-ray structural analysis has been performed for selected dimers to confirm phase identification. For most of the studied dimers, nematic or columnar phases have been detected, for several compounds appearing in a nematic-columnar phase sequence on cooling from the isotropic phase. The studied dimers showed richer polymorphism than their monomeric counterparts.     

Preparation and mesomorphic properties of 1-methyl-1H-benzimidazole-based compounds

A series of 1-methyl-1H-benzimidazole-based compounds, 2-(4?-alkoxy-1,1?-biphenyl-4-yl)-1-methyl- 1H-1,3-benzimidazole derivatives (nPPMx-M) with terminal hydrogen, methyl and nitro moieties (coded as nPPMH-M, nPPMM-M and nPPMN-M, respectively), were prepared and their structures were characterised. The compounds display enantiotropic smectic mesophases for hydrogen and methyl terminated compounds (nPPMH-M and nPPMM-M), and enantiotropic nematic mesophases for nitro terminated compounds (nPPMN-M) with short alkoxy chain below than 10 carbon atoms, where the mesophase ranges are 24–72°C and 74–104°C on heating and cooling processes for nPPMH-M, 90–119°C and 110–135°C for nPPMM-M, and 102–129°C and 113–207°C for nPPMN-M, respectively. It is noted that the compounds nPPMx-M exhibit much lower melting points and much wider mesophase range both in heating and cooling than non-1-methyl substituted analogs, which are ascribed to the disruption of hydrogen bonding among the molecules caused by methyl substitution at 1-position of benzimidazole. Meanwhile, among the compounds nPPMx-M, much wider mesophase ranges are obtained for nPPMM-M and nPPMN-M, indicating a much high mesophase stability for the compounds bearing terminal moiety (CH₃ and NO₂).     

Synthesis and properties of mesogenic laterally fluorinated compounds containing benzoxazole unit

Series of mesogenic laterally fluorinated compounds, 2-(2′,3′-difluoro-4′-alkoxybiphenyl-4-yl)-benzoxazole derivatives (nB-Fx) bearing different substituents (H, CH₃, Cl, NO₂, coded as nB-FH, nB-FM, nB-FC and nB-FN, respectively) at 5-position, were prepared and characterised. Their phase transition behaviour was investigated by differential scanning calorimetry and polarising optical microscopy. nB-Fx with alkoxy chain lengths of 2 to 10 carbons exhibited enantiotropic mesophases, for which the mesophase ranges were 0°C–58°C and 0°C–71°C on heating and cooling for nB-FH, 41°C–93°C and 66°C–140°C for nB-FM, 44°C–133°C and 87°C–155°C for nB-FC, and 0°C–76°C and 0°C–95°C for nB-FN, respectively. Compared to non-fluorinated analogues, with the exception of nB-FC, fluorinated nB-Fx mainly exhibited nematic mesophase both in heating and cooling, which were attributed to the disruption of the side-to-side intermolecular packing caused by the two ortho-lateral fluoro substituents. For nB-Fx series, nB-FM, nB-FC and nB-FN exhibited a much wider mesophase range than the corresponding nB-FH series, which indicated that the substituent at benzoxazole moiety was helpful in increasing the mesophase stability. With the exception of nB-FN, the nB-Fx series displayed intense photoluminescence emission at 379–383 nm in methylene chloride solution, when it was excited at its absorption maxima.     

Synthesis and characterisation of benzoxazole-based liquid crystals possessing 3,5-difluorophenyl unit

Series of fluorinated compounds, 2-(3′,5′-difluoro-4′-alkoxybiphenyl-4-yl)-benzoxazole derivatives (nFBx), were prepared and characterised. Their phase transition behaviour was investigated by differential scanning calorimetry and polarising optical microscopy. In the case of carbon atoms in the alkoxy chain between 4 and 10, they exhibited enantiotropic mesophases with the mesophase ranges of 12–119°C and 23–152°C on heating and cooling for compounds bearing different substituents (H, CH₃, Cl, and NO₂). With the exception of nitro-substituted compounds, the nFBx series displayed intense photoluminescence emission at 380–385 nm in methylene chloride solution when they were excited at their absorption maxima. Compared to non-fluorinated analogues, fluorinated compounds nFBx (apart from nitro-substituted compounds) exhibited much lower melting points, but comparable or slightly narrower mesophase ranges during both heating and cooling, which were attributed to the disruption of the side-to-side intermolecular packing caused by the two lateral fluoro substituents.     

Visco-elastic properties of reentrant nematic liquid crystalline mixtures

The visco-elastic properties for binary mixtures of 4-n -hexyloxy-4′-cyanobiphenyl (6OCB) and 4-n-octyloxy-4′-cyanobiphenyl (8OCB) are investigated in detail by a light scattering technique. The mixtures exhibit a reentrant nematic (RN) phase between the smectic A (SmA) and crystal phases in the range 22.0–29.5 wt % of 6OCB. The viscosity and the elastic constant increase with cooling in both the nematic and reentrant nematic phases. It is also found that the mixtures exhibit anomalously large values of viscosity and elastic constant near the phase transition, i.e. a pretransitional phenomenon can be observed. The activation energy for viscosity is smaller in the RN phase than in the ordinary nematic phase appearing at higher temperatures, while the normalized elastic constant (defined as the ratio of the elastic constant to the square of the dielectric anisotropy) is larger. Moreover, the visco-elastic behaviour depends on the specific time during which the sample has been kept in the SmA phase. These results confirm that the SmA phase has a strong influence on the formation of molecular aggregates, which plays an important role in the reentrant phenomenon of these systems.     

The effect of intermolecular actions on the nematic phase range of tolane-liquid crystals

An approach to understand the effect of intermolecular actions on the nematic stability, a series of tolane compounds nH containing intermolecular π–π stacking, dipole–dipole and hydrogen bond interactions, are developed and investigated. Their mesophase behaviour were measured by differential scanning calorimetry (DSC) and polarising optical microscopy (POM), the results show that carboxylic acids nH exhibit high melting points and narrow nematic phase intervals, which are attributed to the too strong intermolecular actions. By disrupting the intermolecular hydrogen bond, their corresponding methyl esters nC have been designed and synthesised. It is interesting to note that these compounds exhibit broad nematic mesophase intervals and low melting points. The above results demonstrate that the interruption of intermolecular actions is an effective way to improve the nematic stability. In addition, the effects of the terminal alkyl chains and the terminal polar groups on the nematic stability were also discussed. Finally, DFT calculations of molecular conformation and dipole moment were conducted to better understanding of the molecular structure–mesomorphic property relationship.     

Synthesis and study the liquid crystalline properties of compounds containing benzoxazole core and terminal vinyl group

Terminal vinyl-based benzoxazole liquid crystalline compounds, 2-(3-fluoro-4?-alkoxy-1,1?-biphenyl ?4-yl)-5-(2-propenyloxymethyl)-benzoxazole (nPPF(2)BP), were synthesised and their structures were confirmed by infrared (IR) spectra, proton nuclear magnetic resonance (¹H-NMR) spectra, gas chromatography with electron impact-mass spectrometry (GC/EI-MS), matrix-assisted laser desorption/ionisation-time of flight (MALDI-TOF) mass spectrometry and elemental analysis (EA). The compounds show enantiotropic smectic/nematic phases with mesophase ranges are 71–97 °C and 87–136°C on heating and cooling processes for nPPF(2)BP, respectively. They give low melting points due to lateral fluoro substituent and flexible terminal 2-propenyloxymethyl chain. It is found that the compounds nPPF(2)BP with shorter alkoxy chain (n = 3, 4) exhibit a wide range of nematic mesophase, which is ascribed to enhanced π–π interaction caused by terminal vinyl moiety, whereas further elongation of the terminal alkoxy chain results in supressing nematic phase and increasing smectic mesophase. Compared with methyl terminated analogues, 2-propenyloxymethyl terminated compounds nPPF(2)BP display much lower melting points and wider or comparable mesophase range both in heating and cooling.     

Heterocyclic pyridine-based liquid crystals: synthesis and mesomorphic properties

A series of new calamitic liquid crystals, 4-{[(pyridin-4-yl)methylidene]amino}phenyl 4-alkoxybenzoates comprising a heterocyclic (pyridine) and two phenyl rings core system, terminal alkoxy chain, imine and ester linkers were synthesised and characterised. This series consists of nine members wherein the members differ by the length of alkoxy chain (C_nH_2n+1O–, where n = 2, 4, 6, 8, 10, 12, 14, 16, 18). Spectral analysis results were in accordance with the expected structure. Their thermotropic behaviours were studied by using differential scanning calorimetry, optical polarising microscopy and powder X-ray diffraction techniques. A single mesophase (nematic) was observed for the first three members of the series (n = 2, 4 and 6). As the alkoxy chain increased to n = 8 and n = 10, the nematic phase appeared together with an additional smectic A (SmA) phase. When moving from n = 12 until the highest members (n = 18), the nematic phase disappeared and these compounds only exhibited a single mesophase (SmA).     

Monosubstituted ferrocene liquid crystals containing click triazole with a wide nematic phase temperature range

New monosubstituted ferrocenomesogens of the 1,4-substituted-1,2,3-triazole series 3a-3d and the 5-halogen-1,4-substituted-1,2,3-triazole series 4a-4d were successfully synthesised through a facile and versatile synthetic route using click reactions with moderate yields, in different atmospheres, and catalysed by different amounts of CuX (X = Br, I). Two series of compounds exhibited a typical nematic liquid crystal texture, and the 5-halogen-1,4-substituted-1,2,3-triazole series 4 had a wider mesomorphic temperature range than the corresponding series 3 due to the effect of the halogen atom substituent on the triazole. These compounds showed similar absorption spectra, but the fluorescence emission spectra of 4 were obviously redshift relative to 3. Cyclic voltammetry investigations revealed that the redox-active ferrocenyl groups of 3 and 4 follow one-electron transfer processes.     

X-ray diffraction from the uniaxial and biaxial nematic phases of bent-core mesogens

X-ray diffraction patterns for the uniaxial and biaxial nematic phases exhibited by rigid bent-core mesogens were calculated using a simple model for the molecular form factor and a modified Lorentzian structure factor. The X-ray diffraction patterns depend strongly on the extent of the alignment of the molecular axes as well as the orientation of molecular planes. The X-ray diffraction can be unequivocally used to identify the biaxial nematic phase, study the uniaxial-biaxial phase transition, and estimate the order parameters of the nematic phase.     

Synthesis,mesomorphic, photophysical and computational studies of new achiral four-ring unsymmetrical bent-core mesogens and their Copper(II) complexes

New achiral four-ring unsymmetrical bent-core mesogens derived from 2,5-dihydroxybenzaldehyde and their copper(II) complexes have been synthesised as a new design with an imine and ester linkage. These new bent-core molecules resemble hockey-stick shape, which possesses 4-n-alkyloxy chain (4-n-hexyloxy and 4-n-decyloxy) at one end and methyl or methoxy group at the other end of the molecule. The synthesis, spectroscopic characterisation, phase transition temperature and characterisation of phase behaviour are reported. The bent-core molecules exhibited monotropic nematic and smectic A phase depending on the terminal chain length. Interestingly, copper(II) complexes of bent-core molecules displayed monotropic nematic phase. This is the first report on copper(II) complexes of bent-core molecules that exhibited nematic phase. The four-ring bent-core molecule exhibited fluorescence with large stoke shift. The density functional theory calculations of bent-core molecules and their copper(II) complexes are carried out using Gaussian 09 program at B3LYP level to obtain the stable molecular conformation, dipole moment, highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO) energies and bending angle of the compounds. The natural atomic charges and electronic configurations of the atoms of free ligands as well as the complexes have been evaluated.     

Crystal structures of mesogens with a bent molecular shape: 4,6-dichloro-1,3-phenylene bis-[4-(4-n-alkyloxy-phenyliminomethyl)benzoates]

The crystal and molecular structures of hexyloxy (3a) and heptyloxy homologues (3b) of mesogenic 4,6-dichloro-1,3-phenylene bis[4-(4-n-alkyloxy-phenyliminomethyl)benzoates] have been determined by X-ray analyses. Both compounds crystallize in the triclinic space group with two molecules in unit cells of following dimensions. 3a: a=8.340(2), b=13.143(4) and c=19.364(6) Å; =96.36(4), β=93.33(4) and γ=103.07(1)°; 3b: a=8.738(2), b=15.850(4) and c=17.618(5) Å; =115.73(2), β=90.82(2) and γ=95.49(2)°. The structures were solved by direct methods and refined on F² to R values of R1=0.046 (3a) and 0.094 (3b).

The molecular structures of 3a and 3b are discussed in detail, especially in view of the correlation between molecular conformation (banana- or rod-shaped molecules) and liquid crystalline behaviour (observed mesophases). It can be shown for 3a and 3b that the molecules are not strongly bent and not so far from the rod-like shape. Crystal packing of the mesogens is characterized by a parallel arrangement of the strongly interlocked molecules.