Poly(propylene imine) dendrimer complexes of Cu(II), Zn(II), and Co(III) as catalysts of hydrolysis of p-nitrophenyl diphenyl phosphate

Poly(propylene imine) dendrimers having 8, 32, and 64 primary amine end groups form diamino Cu(II), diamino Zn(II), and tetramino Co(III) complexes that are identified spectrophotometrically and titrimetrically. The dendrimer–metal ion complexes catalyze the hydrolysis of p-nitrophenyl diphenyl phosphate in zwitterionic buffer solutions at pH ≤ 8.1 with relative activities Cu(II) > Zn(II) > Co(III). The rates of hydrolysis are faster with sodium perchlorate than with sodium chloride to control ionic strength. In sodium perchlorate solutions with Cu(II) the rates increase with increasing size of the dendrimer. In sodium chloride solutions with Cu(II) the rates decrease with increasing size of the dendrimer. Rate constants in buffered sodium chloride solutions of dendrimers and 1.0mM Cu(II) are 1.3–6.3 times faster than in the absence of Cu(II). The fastest hydrolyses occurred at a dendrimer primary amine to Cu(II) ratio NH₂/Cu ≤ 2. At NH₂/Cu = 4 and with the 1,4,7,10-tetraazacyclodecane complex of Cu(II) hydrolysis rates were much slower. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2727–2736, 1999     

Synthesis and characterization of a ligand‐substituted poly(amidoamine) dendrimer with external terpyridine units and its iron(II) complexes

The ligand‐substituted poly(amido amine) dendrimer 2 containing terpyridine ligands located exclusively at the peripheries of the dendrimer and its iron‐containing dendrimer 3 have been synthesized using modification reactions. Cyclic voltammetric studies indicate that the external iron centers on the outer surface of the dendrimer are electrochemically equivalent. The treatment of 2 with Fe²⁺ ions leads to a dendrimer assembly due to the formation of iron complexes among the ligand‐substituted dendrimers.     

Syntheses,Spectral, Thermal and Electrochemical Studies of 3-Carboxylacetonehydroxamic Acid and its Iron(Ii), Cobalt(Ii), Nickel(Ii), Copper(Ii) and Zinc(Ii) Complexes

3-Carboxylacetonehydroxamic acid (CAHA) and its iron(II), cobalt(II), nickel(II), copper(II) and zinc(II) complexes were synthesized and characterized by elemental analysis, UV-Vis and IR spectra and magnetic susceptibility. The pK _a1 and pK _a2 values of the ligand in aqueous solution were found to be 6.5 ± 0.1 and 8.6 ± 0.1, which correspond to dissociation of carboxyl and hydroxamic protons, respectively. The dianion CAH acts as a tetradentate ligand through the hydroxamate and carboxylate groups and coordinates to the divalent metal ions, forming coordination polymers with a metal-to-ligand ratio of 1 : 1 in the solid state. FTIR spectra and thermal decomposition of the ligand and its metal complexes were recorded and briefly discussed. The electrochemical behavior of the complexes was investigated by square wave voltammetry and cyclic voltammetry at neutral pH. In contrast to the solid state, the iron(II) and copper(II) cations form stable complex species with a metal-to-ligand ratio of 1 : 2 in solution. The iron(II), cobalt(II) and nickel(II) complexes show two-electron irreversible reduction behavior, while the copper(II) and zinc(II) complexes undergo quasi-reversible and reversible electrode reactions, respectively. The stability constants of the complexes were determined by square wave voltammetry.     

Synthesis,Spectral and Structural Characterization of the First Bis-2-Pyridylethanol Complexes of Mn(II), Fe(II), Co(II), Ni(II), Cu(II) and Zn(II) Saccharinates: Crystal Structures of Diaquabis(2-Pyridylethanol)Iron(II) and Copper(II) Saccharinates

The first 2-pyridylethanol (pyet) complexes of manganese(II), iron(II), cobalt(II), nickel(II), copper(II) and zinc(II) saccharinates, were synthesized and characterized by elemental analyses, magnetic measurements, UV-Vis, and IR spectroscopic techniques. Crystal and molecular structures of the iron(II) and copper(II) complexes were determined by single crystal X-ray diffractometry. The experimental data showed that all the complexes are mononuclear with a general formula [M(H₂O)₂(pyet)₂](sac)₂, where sac is the saccharinate anion. All the metal ions are octahedrally coordinated by two aqua and two pyet ligands. The pyet ligand acts as a bidentate ligand through its amine nitrogen and hydroxyl oxygen atoms forming a six-membered chelate ring, while the sac ions remain outside the coordination sphere. All the complexes are isomorphous with a monoclinic space group P2₁/n and Z = 2.     

Norbornene polymerization using multinuclear nickel catalysts based on a polypropyleneimine dendrimer scaffold

Four multinuclear nickel complexes derived from generation 1 (G1) and generation 2 (G2) dendrimeric salicylaldimine ligands based poly(propyleneimine) dendrimer scaffolds of the type, DAB-(NH₂)_n (n = 4 or 8, DAB = diaminobutane) were evaluated as catalysts precursors in the polymerization of norbornene, using methylaluminoxane as co-catalyst. All four catalyst evaluated were found to be active for norbornene polymerization giving polymers with moderate to high molecular weights and low polydispersity indices. The polymerization results indicate that there is some sort of dendritic effect, in that the catalyst activity appears to be influenced by the dendrimer generation.     

Spectral characterization,antimicrobial and antibiofilm activity of poly(propylene imine) metallodendrimers in solution and applied onto cotton fabric

Abstract

Poly(propylene imine) dendrimers from first and third generation modified with 1,8-naphthalimide units and their Cu(II) complexes have been characterized by fluorescence and EPR spectroscopy. Cotton fabric has been modified with these dendrimers and their color characteristics were determined. The antimicrobial activity of dendrimer ligands and their Cu(II) complexes in solution and after their deposition on a cotton fabric was investigated. Good antibacterial effect of dendrimer ligands has been obtained, which is enhanced at their Cu(II) complexes. After their deposition on cotton fabric metallodendrimers exhibit good antibiofilm activity.     

Synthesis of Polyaminosiloxane Matrices with Coordinated Cobalt(II) and Iron(III) Complexes with Porphyrin and Phthalocyanine Derivatives

Cobalt(II) complexes with hexadecafluorophthalocyanine and meso-tetraphenylporphyrin (CoF₁₆Pc and CoTPP, respectively) and iron(III) meso-tetraphenylporphyrin chloride (FeTPPCl) were inserted into polyaminosiloxane matrices at the stage of hydrolytic polycondensation of silanes according to newly developed procedures; the amino and imidazolyl groups were used to give PAPS and PIPS matrices, respectively. It was shown that the incorporation of CoF₁₆Pc only slightly affects the structure-adsorption properties of the resulting polymers, while the PIPS matrix containing CoTPP and FeTPPCl becomes nonporous. Electronic and EPR spectroscopy revealed extracoordination of all complexes with the functional groups of both matrices. The EPR spectra of the cobalt complexes show no signals, suggesting that they are incorporated into a polyaminosiloxane matrix in the aggregated form.     

Magnetocaloric properties of dendrimer complexes of Fe(III) with substituted Schiff base

In dendrimer complexes of iron (III) with Schiff base (three complexes of iron (III) based on azomethine 4,4′-dodecyloxybenzoyloxybenzoyl-4-salicylidene-2-aminopyridine, a significant magnetocaloric effect (MCE) and heat capacity was found the first time. It was found that the magnitude of MCE depends on the nature of the counter-ion of the complex. MCE were measured with a microcalorimeter over the temperature range of 278–320 K and in a magnetic induction of 0–1.0 T. The temperature dependences of the MCE dendrimer complexes of iron (III) with Schiff base were obtained for the first time. For all the samples studied, the existence of extreme temperature dependence of MCE in the range of temperatures 300–350 K, which is possibly the result of the magnetic phase transition, is shown. The correlation between the thermotropic mesomorphism with the magnetic phase transition in complexes has been established.     

Iron(Ⅱ) hydrides bearing a tetradentate PSNP ligand

Iron(II) hydrides bearing PSNP tetradentate ligand were synthesized and well characterized. The hydrido iron complex [2H(NCMe)](BF₄) is an extremely efficient catalyst for the hydroboration of aldehydes at room temperature.     

Structural induced control of energy transfer within Zn(II)-porphyrin dendrimers

We report on a study of singlet-singlet annihilation kinetics in a series of Zn(II)-porphyrin-appended dendrimers, where the energy transfer efficiency is significantly improved by extending the molecular chain that connects the light-harvesting chromophores to the dendrimeric backbone with one additional carbon. For the largest dendrimer having 64 Zn(II)-porphyrins, only approximately 10% of the excitation intensity is needed in order to observe the same extent of annihilation in the dendrimers with the additional carbon in the connecting chain as compared to those without. Complete annihilation, until only one chromophore remains excited, now occurs within subunits of seven chromophores, when half of the chromophores are excited. The improvement of the annihilation efficiency in the largest dendrimer with 64 porphyrins can be explained by the presence of a the two-step delayed annihilation process, involving energy hopping from excited to nonexcited chromophores prior to annihilation. In the smallest dendrimer with only four chromophores, delayed annihilation is not present, since the direct annihilation process is more efficient than the two-step delayed annihilation process. As the dendrimer size increases and the chances of originally exciting two neighboring chromophores decreases, the delayed annihilation process becomes more visible. The additional carbon, added to the connecting chain, results in more favorable chromophore distances and orientations for energy hopping. Hence, the improved energy transfer properties makes the Zn(II)-porphyrin-appended dendrimers with the additional carbon promising candidates as light-harvesting antennas for artificial photosynthesis.     

Structural elucidation of manganese(II), iron(III), cobalt(II), nickel(II), copper(II) and zinc(II) complexes of a new multidentate dihydrazino quinoxaline derivative

Summary Manganese(II), iron(III), cobalt(II), nickel(II), copper(II) and zinc(II) complexes of a new multidentate oxygen-nitrogen donor, bis(N-salicylidene)-2,3-dihydrazino-1,4-quinoxaline (H₂BSDHQ) were prepared and characterised by elemental analysis, conductance, thermal, spectral and magnetic data. H₂BSDHQ deprotonates to give a dibasic ONNO donor set in a trivalent iron(III) complex, which binds to the divalent metal ions in a bis-tridentate fashion, using two monobasic ONN donor sets, and resulting in polymeric complexes. Octahedral geometries are proposed for all these complexes, and preliminary studies show that they possess potential antimicrobial activity.     

Compleximetric titrations of iron(III) and iron(II) with triethylenetetraminehexaacetic acid

The stability constants of the iron(II) complexes of TTHA (triethylenetetraminehexaacetic acid) were calculated from measured pH and redox potentials. The values of the cumulative constants obtained were: log β_FeL= 15.37, log β_FeHL = 23.83, log β_FeH2L = 28.0, log β_Fe2L = 24.73. On the basis of these values and the previously determined constants ofiron(III) complexes, the possibilities of titrating iron(III) and iron(II) with TTHA were investigated. Depending on the experimental conditions, either FeL or Fe₂L formed. Actual titrations were in agreement with the developed theory. The influence of aluminium and titanium on titrations of iron(III) solutions was elucidated.     

Complexation between iron(III) and nicotinamide in aqueous dimethyl sulfoxide

The stability constants of iron(III) complexes with nicotinamide in water-DMSO mixtures (X _DMSO = 0–0.75) were determined by potentiometric titration at 25.0 ± 0.1°C and an ionic strength of 0.25 (NaClO₄). The contributions from the solvation of the reagents to the Gibbs energy of complexation transfer were analyzed. The stabilities of iron(III), copper(II), and silver(I) complexes with nicotinamide were compared. The observed decrease in the stability constants was attributed to the stabilization of iron(III) solvate complexes as the DMSO content increases.     

Iron(II) Complexes of Chiral Tridentate Nitrogen Donors and their Application in Catalytic Hydrosilylation Reactions

Enantiomerically pure, C₂-symmetric 2,6-bis(pyrazol-3-yl) pyridine ligands were obtained by treatment of diethyl-2,6-pyridinedicarbonate with (1R,4R)-(+)-camphor in the presence of NaH followed by ring closure with hydrazine. After twofold N-alkylation at the pyrazole rings, the addition of iron(II) chloride led to the according pentacoordinate dichloridoiron(II) complexes. All intermediates of the ligand synthesis, the ligands bearing NCH₃ and NCH₂C₆H₅ groups and the derived iron(II) complexes were structurally characterized by means of X-ray structure analysis. In-situ reaction with iron(II) carboxylates resulted in the formation of iron(II) carboxylate complexes, which turned out to be highly active in the hydrosilylation of acetophenone. However, even at room temperature, the enantiomeric excess of the product 1-phenylethanol is poor. ⁵⁷Fe Mössbauer spectroscopy gave an insight into the species formed during catalysis.     

Polarographic determination of iron(II) and iron(III) complexes with edta

The iron(II) and iron(III) complexes with EDTA can be determined separately and in mixtures in acetate-buffered medium at pH 4.0. The E_{$\text{1}\text{2}$}values are in the range ?0.105 to ?0.112 V vs. SCE. Linear calibration plots are obtained over the range 0–1.0 mM for each oxidation state. A sample-handling procedure for avoiding oxidation of iron(II) species is described. It is shown that the acetate buffer system does not affect the stability of the iron-EDTA complexes.     

Synthese und Eigenschaften von Eisen(II)-Komplexen mit vier- und fünfzähnigen N,S-Chelatliganden. Kristallstruktur von [Fe(GBMA)py] · py (GBMA2− = Glyoxal-bis-(2-mercaptoanil))

Synthesis and Properties of Iron(II) Complexes with tetra- and pentadentate N,S-Chelate Ligands. Crystal Structure of [Fe(GBMA)py] · py (GBMA^2? = Glyoxal bis-(2-mercaptoanil)) The complexes glyoxal-bis-(2-mercaptoanil)iron(II) [Fe(GBMA)], diacetyl-bis-(2-mercaptoanil)iron(II), [Fe(DBMA)] and o-phthalaldehyde-bis-(2-mercaptoanil)iron(II) [Fe(PhBMA)] have been synthesized by reaction of the corresponding protonated ligands with anhydrous iron(II)-acetate. Pyridine-2,6-dialdehyde-bis-(2-mercaptoanil)iron(II), [Fe(PyBMA)] was obtained by a template synthesis with pyridine-2,6-dialdehyde, 2-aminothiophenol and iron(II)-acetate. Recrystallizing the complexes [Fe(GBMA)] and [Fe(DBMA)] from pyridine afforded [Fe(GBMA)py] · py and [Fe(DBMA)py] · py. For all complexes the magnetic properties have been determined, and the Mössbauer spectra were recorded at 82 K. Compounds [Fe(GBMA)] and [Fe(DBMA)] show quasi reversible redox properties in the cyclovoltammogram, while for [Fe(PhBMA)] an irreversible oxidation was observed. [Fe(GBMA)py] · py crystallizes in the monoclinic space group P2₁ with a = 1288.7(1), b = 1242.63(5), c = 1396.0(1) pm, β = 98.24(1)°, and Z = 4. In the neutral complex the Fe atom has a square pyramidal coordination with the pyridine nitrogen atom in apical position. The basal plane is formed by two nitrogen and two sulfur atoms of the ligand GBMA^2?. The iron is located 40 pm above the pyramidal base. Its average distances to the donor atoms of the GBMA ligand are Fe? N = 190 pm, and Fe? S = 222 pm, while the distance to the nitrogen atom of the coordinated pyridine molecule is 207 pm.     

Polymer Supported Schiff Base Complexes of Iron(III), Cobalt(II) and Nickel(II) Ions and their Catalytic Activity in Oxidation of Phenol and Cyclohexene

The polymer supported transition metal complexes of N,N′‐bis (o‐hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by immobilization of N,N′‐bis(4‐amino‐o‐hydroxyacetophenone)hydrazine (AHPHZ) Schiff base on chloromethylated polystyrene beads of a constant degree of crosslinking and then loading iron(III), cobalt(II) and nickel(II) ions in methanol. The complexation of polymer anchored HPHZ Schiff base with iron(III), cobalt(II) and nickel(II) ions was 83.30%, 84.20% and 87.80%, respectively, whereas with unsupported HPHZ Schiff base, the complexation of these metal ions was 80.3%, 79.90% and 85.63%. The unsupported and polymer supported metal complexes were characterized for their structures using I.R, UV and elemental analysis. The iron(III) complexes of HPHZ Schiff base were octahedral in geometry, whereas cobalt(II) and nickel(II) complexes showed square planar structures as supported by UV and magnetic measurements. The thermogravimetric analysis (TGA) of HPHZ Schiff base and its metal complexes was used to analyze the variation in thermal stability of HPHZ Schiff base on complexation with metal ions. The HPHZ Schiff base showed a weight loss of 58% at 500°C, but its iron(III), cobalt(II) and nickel(II) ions complexes have shown a weight loss of 30%, 52% and 45% at same temperature. The catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in presence of hydrogen peroxide as an oxidant. The supported HPHZ Schiff base complexes of iron(III) ions showed 64.0% conversion for phenol and 81.3% conversion for cyclohexene at a molar ratio of 1∶1∶1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 55.5% conversion for phenol and 66.4% conversion for cyclohexene at 1∶1∶1 molar ratio of substrate to catalyst and hydrogen peroxide. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 90.5% and 96.5% with supported HPHZ Schiff base complexes of iron(III) ions, but was found to be low with cobalt(II) and nickel(II) ions complexes of Schiff base. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was different with studied metal ions and varied with molar ratio of metal ions in the reaction mixture. The selectivity was constant on varying the molar ratio of hydrogen peroxide and substrate. The energy of activation for epoxidation of cyclohexene and phenol conversion in presence of polymer supported HPHZ Schiff base complexes of iron(III) ions was 8.9 kJ mol^?1 and 22.8 kJ mol^?1, respectively, but was high with Schiff base complexes of cobalt(II) and nickel(II) ions and with unsupported Schiff base complexes.     

Synthesis and catalytic activities of Pd-phosphine complexes modified poly(ether imine) dendrimers

In this paper, we report synthesis of new alkyldiphenyl phosphine ligand modified poly(ether imine) dendrimers up to the third generation. The phosphinated dendrimers were obtained by functional group transformations of the alcohols present at the periphery of the dendrimers to chloride, followed by phosphination using LiPPh₂. The modification at the peripheries of the dendrimers was performed successfully to obtain up to 16 alkyl diphenylphosphines in the case of a third generation dendrimer, in good yields for each individual step. After phosphination, dendritic ligands were complexed with Pd(COD)Cl₂ to give dendritic phosphine-Pd^II complexes. Both the ligands and the metal complexes were characterized by spectroscopic and spectrometric techniques including high-resolution mass spectral analysis for the lower generations. Evaluation of the catalytic efficacies of the dendrimer-Pd^II metal complexes in mediating a prototypical C-C bond forming reaction, namely the Heck reaction, was performed using various olefin substrates. While the substrate conversion lowered with catalyst in the order from monomer to third generation dendrimer, the second and third generation dendrimers themselves were found to exhibit significantly better catalytic activities than the monomer and the first generation dendrimer.     

A family of four-coordinate iron(II) complexes bearing the sterically hindered tris(pyrazolyl)borato ligand Tp(tBu,Me)

A new family of 14‐electron, four‐coordinate iron(II) complexes of the general formula [Tp^tBu,MeFeX] (Tp^tBu,Me is the sterically hindered hydrotris(3‐tert‐butyl‐5‐methyl‐pyrazolyl) borate ligand and X=Cl ( 1 ), Br, I) were synthesized by salt metathesis of FeX₂ with Tp^tBu,MeK. The related fluoride complex was prepared by reaction of 1 with AgBF₄. Chloride 1 proved to be a good precursor for ligand substitution reactions, generating a series of four‐coordinate iron(II) complexes with carbon, oxygen, and sulphur ligands. All of these complexes were fully characterized by conventional spectroscopic methods and most were characterized by single‐crystal X‐ray crystallographic analysis. Magnetic measurements for all complexes agreed with a high‐spin (d⁶, S=2) electronic configuration. The halide series enabled the estimation of the covalent radius of iron in these complexes as 1.24 Å.     

Iron(II), cobalt(III), nickel(II) and copper(II) chelates of furan and thiophene azo-oximes

Summary Complexes of furan and thiophene azo-oximes with iron(II), cobalt(III), nickel(II) and copper(II) have been prepared and characterised. Iron(II), cobalt(III) and copper(II) complexes are diamagnetic in the solid state. The diamagnetism of the copper(II) chelates is suggestive of antiferromagnetic interaction between two copper centres.¹H n.m.r. spectral data suggest atrans-octahedral geometry for the tris-chelates of cobalt(III). Nickel(II) complexes are paramagnetic, in contrast to the diamagnetism of the analogous complexes of arylazooximes. The electronic spectra are suggestive of octahedral geometry for the iron(II), cobalt(III) and nickel(II) complexes, andD _4h -symmetry for copper(II). Infrared data indicate N-bonding of the oximino-group to the metal ions.