High Substitution Synthesis of Carboxymethyl Chitosan for Properties Improvement of Carboxymethyl Chitosan Films Depending on Particle Sizes

This study investigated the effect of chitosan particle sizes on the properties of carboxymethyl chitosan (CMCh) powders and films. Chitosan powders with different particle sizes (75, 125, 250, 450 and 850 µm) were used to synthesize the CMCh powders. The yield, degree of substitution (DS), and water solubility of the CMCh powders were then determined. The CMCh films prepared with CMCh based on chitosan with different particle sizes were fabricated by a solution casting technique. The water solubility, mechanical properties, and water vapor transmission rate (WVTR) of the CMCh films were measured. As the chitosan particle size decreased, the yield, DS, and water solubility of the synthesized CMCh powders increased. The increase in water solubility was due to an increase in the polarity of the CMCh powder, from a higher conversion of chitosan into CMCh. In addition, the higher conversion of chitosan was also related to a higher surface area in the substitution reaction provided by chitosan powder with a smaller particle size. As the particle size of chitosan decreased, the tensile strength, elongation at break, and WVTR of the CMCh films increased. This study demonstrated that a greater improvement in water solubility of the CMCh powders and films can be achieved by using chitosan powder with a smaller size.     

Synthesis and characterization of antibacterial semi-interpenetrating carboxymethyl chitosan/poly (acrylonitrile) hydrogels

Blend hydrogels composed of carboxymethyl chitosan (CMCh) and poly (acrylonitrile) (PAN) were synthesized via crosslinking method. Several analyses were made to investigate both physical and thermal properties of CMCh/PAN hydrogels like; FTIR, scanning electron microscope, XRD and thermogravimetric analysis (TGA). TGA results showed that CMCh/PAN hydrogels are thermally more stable than CMCh and their thermal stability increases as PAN content increases in the hydrogel. Moreover, the swelling behavior of CMCh/PAN hydrogels was studied in different buffer solutions. It was found that CMCh/PAN hydrogels swell much more than PAN especially at pH 9. The hydrogels sorption for different dyestuff and various metal ions like; Cu²⁺, Cd²⁺ and Co²⁺ were also studied. In this work, antibacterial characteristic of hydrogels was mainly investigated towards Escherichia coli (E. coli) as a serious disease-leading bacterium. All tested hydrogels have clearly presented good antibacterial activity as CMCh content increases in the hydrogels.     

Preliminary Studies for Cephamycin C Purification Technique

A study was made for purification of cephamycin C from fermentation of Streptomyces clavuligerus. Initially, the culture broth was clarified by microfiltration and ultrafiltration, after which the resulting permeates were subjected to nonspecific adsorption and ion-exchange chromatography on resin columns. The antibiotic activity was measured by the biological method at each stage by assaying its activity against the Escherichia coli ESS, super sensitive to β-lactam antibiotic. The purification processes were assessed in relation to the variables affecting each step. The purification efficiency by nonspecific adsorption was monitored by UV spectrophotometry, while the ion-exchange adsorption fractions were assessed by NMR spectroscopy. Some of the fractions obtained during purification were also analyzed by mass spectrometry (LC/MS and LC/MS/MS) to identify the cephamycin C molecule. These preliminary results proved the process feasibility.     

Biocompatible channels for field-flow fractionation of biological samples: correlation between surface composition and operating performance

Biocompatible methods capable of rapid purification and fractionation of analytes from complex natural matrices are increasingly in demand, particularly at the forefront of biotechnological applications. Field-flow fractionation is a separation technique suitable for nano-sized and micro-sized analytes among which bioanalytes are an important family. The objective of this preliminary study is to start a more general approach to field-flow fractionation for bio-samples by investigation of the correlation between channel surface composition and biosample adhesion. For the first time we report on the use of X-ray photoelectron spectroscopy (XPS) to study the surface properties of channels of known performance. By XPS, a polar hydrophobic environment was found on PVC material commonly used as accumulation wall in gravitational field-flow fractionation (GrFFF), which explains the low recovery obtained when GrFFF was used to fractionate a biological sample such as Staphylococcus aureus. An increase in separation performance was obtained first by conditioning the accumulation wall with bovine serum albumin and then by using the ion-beam sputtering technique to cover the GrFFF channel surface with a controlled inert film. XPS analysis was also employed to determine the composition of membranes used in hollow-fiber flow field-flow fractionation (HF FlFFF). The results obtained revealed homogeneous composition along the HF FlFFF channel both before and after its use for fractionation of an intact protein such as ferritin.     

Separation and purification of 9,10‐dihydrophenanthrenes and bibenzyls from Pholidota chinensis by high‐speed countercurrent chromatography

Stilbenoids are the main components of leaves and stems of Pholidota chinensis. In the present investigation, high‐speed counter‐current chromatography was used for the separation and purification of two classes of stilbenoids, namely, bibenzyls and 9,10‐dihydrophenanthrenes, on a preparative scale from whole plants of P. chinensis with different solvent systems after silica gel column chromatography fractionation. n‐Hexane/ethyl acetate/methanol/water (1.2:1:1:0.8, v/v/v/v) was selected as the optimum solvent system to purify 1‐(3,4,5‐trimethoxyphenyl)‐1′,2′‐ethanediol ( 1 ), coelonin ( 2 ), 3,4′‐dihydroxy‐5,5′‐dimethoxybibenzyl ( 3 ), and 2,?7‐?dihydroxy‐?3,?4,?6‐?trimethoxy‐?9,?10‐?dihydrophenanthrene ( 4 ). While 2,7‐dihydroxy‐3,4,6‐trimethoxy‐?9,?10‐?dihydrophenanthrene ( 5 ), batatasin III ( 6 ), orchinol ( 7 ), and 3′‐O‐methylbatatasin III ( 8 ) were purified by n‐hexane/ethyl acetate/methanol/water (1.6:0.8:1.2:0.4, v/v/v/v). After the high‐speed counter‐current chromatography isolation procedure, the purity of all compounds was over 94% assayed by ultra high performance liquid chromatography. The chemical structure identification of all compounds was carried out by mass spectrometry and ¹H and ¹³C NMR spectroscopy. To the best of our knowledge, the current investigation is the first study for the separation and purification of bibenzyls and 9,10‐dihydrophenanthrenes by high‐speed counter‐current chromatography from natural resources.     

Synthesis and characterization of novel renewable polyesters based on 2,5‐furandicarboxylic acid and 2,3‐butanediol

Novel polyesters from 2,5‐furandicarboxylic acid or 2,5‐dimethyl‐furandicarboxylate and 2,3‐butanediol have been synthesized via bulk polycondensation catalyzed by titanium (IV) n‐butoxide, tin (IV) ethylhexanoate, or zirconium (IV) butoxide. The polymers were analyzed by size exclusion chromatography, nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy (FTIR), matrix‐assisted laser ionization‐desorption time‐of‐flight mass spectrometry, electrospray ionization time‐of‐flight mass spectrometry, electrospray ionization quadruple time‐of‐flight mass spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. Fully bio‐based polyesters with number average molecular weights ranging from 2 to 7 kg/mol were obtained which can be suitable for coating applications. The analysis of their thermal properties proved that these polyesters are thermally stable up to 270–300 °C, whereas their glass transition temperature (T_g) values were found between 70 and 110 °C. Furthermore, a material was prepared with a molecular weight of 13 kg/mol, with a T_g of 113 °C. This high T_g would make this material possibly suitable for hot‐fill applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Polymer brushes grafted from graphene via bioinspired polydopamine chemistry and activators regenerated by electron transfer atom transfer radical polymerization

Polymer brushes decorated reduced GO (rGO) with advanced applications have been prepared by bioinspired polydopamine (PDA) chemistry integrated with activators regenerated by electron transfer atom transfer radical polymerization (ARGET‐ATRP) technique. First, rGO/PDA was obtained by the process for graphene oxide (GO) coated with a homogeneous bio‐adhesive PDA layer. Then the initiator 2‐bromoisobutyryl bromide (BIBB) was immobilized on the surface of PDA functionalized rGO. Finally, rGO/PDA‐Br was polymerized with N, N‐diethylaminoethyl methacrylate (DEAEMA) and glycidyl methacrylate (GMA) to obtain rGO/PDA‐g‐polymer brushes by ARGET‐ATRP process. The prepared rGO/PDA‐g‐PGMA brush would be subjected to further functionalization with ethylenediamine (EDA), which would impart the obtained products (rGO/PDA‐g‐PGMA‐NH₂) with good adsorption ability toward cationic dyes. The chemical structures and morphologies of the functionalized GO products have been characterized in detail by Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), Raman spectroscopy, thermal gravimetric analysis (TGA), scanning electron microscope (SEM), transmission electron microscope(TEM), and atomic force microscopy (AFM). The distinctive pH‐responsive character of rGO/PDA‐g‐PDEAEMA and adsorption ability of rGO/PDA‐g‐PGMA‐NH₂ for cationic dyes have been explored by UV–vis spectrophotometer. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 689–698     

Absolute Minimal Sampling of Homonuclear 2D NMR TOCSY Spectra for High-Throughput Applications of Complex Mixtures

Modern applications of 2D NMR spectroscopy to diagnostic screening, metabolomics, quality control, and other high-throughput applications are often limited by the time-consuming sampling requirements along the indirect time domain t₁. 2D total correlation spectroscopy (TOCSY) provides unique spin connectivity information for the analysis of a large number of compounds in complex mixtures, but standard methods typically require >100 t₁ increments for an accurate spectral reconstruction, rendering these experiments ineffective for high-throughput applications. For a complex metabolite mixture it is demonstrated that absolute minimal sampling (AMS), based on direct fitting of resonance frequencies and amplitudes in the time domain, yields an accurate spectral reconstruction of TOCSY spectra using as few as 16 t₁ points. This permits the rapid collection of homonuclear 2D NMR experiments at high resolution with measurement times that previously were only the realm of 1D experiments.     

溶剂热方法合成Cu2ZnSnS4空心球

以氯化亚铜,硝酸锌,氯化锡和硫脲作为反应前驱体,聚乙二醇作为模板,利用溶剂热方法合成Cu₂ZnSnS₄中空球。其中,聚乙二醇对于产物的最终形成起到关键作用。文章讨论了Cu₂ZnSnS₄中空球的生长机制,并通过X射线衍射(XRD)、拉曼光谱、场发射电子显微镜(FESEM)、透射电子显微镜(TEM)、X射线能量色散谱(EDX)、X射线光电子谱(XPS)、选区电子衍射谱(SAED)和紫外-可见光分光光度计(UV-Vis)等技术对样品的微结构以及光学性质进行了表征和分析。结果显示Cu₂ZnSnS₄中空球为四方晶体,尺寸为600 nm。其禁带宽度为1.52 eV,适用于制作光伏器件。     

Flash microwave synthesis and sintering of nanosized La0.75Sr0.25Cr0.93Ru0.07o3-δ for fuel cell application

Perovskite-oxide nanocrystals of La_0.75Sr_0.25Cr_0.93Ru_0.07O_3-δ with a mean size around 10 nm were prepared by microwave flash synthesis. This reaction was performed in alcoholic solution using metallic salts, sodium ethoxide and microwave autoclave. The obtained powder was characterised after purification by energy dispersive X-ray analysis (EDX), X-ray powder diffraction (XRD), BET adsorption technique, photon correlation spectroscopy (PCS) and transmission electron microscopy (TEM). The results show that integrated perovskite-type phase and uniform particle size were obtained in the microwave treated samples. At last the synthesised powder was directly used in a sintering process. A porous solid, in accordance with the expected applications, was then obtained at low sintering temperature (1000 °C) without use of pore forming agent.     

Fast purification of trace vitellogenin from Chinese rare minnow using protein A-immobilized antibody

Vitellogenin (Vtg) is a highly responsive biomarker for environmental exposure to various estrogenically active compounds. Here we present a simple, fast, mild, and stable immobilization of anti-Vtg antibody, and demonstrate its powerful applications for preconcentration and purification of fish Vtg proteins, allowing for the monitoring and screening of environmental exposure to estrogenically active compounds. In this immobilization method, rabbit antiserum containing a specific polyclonal antibody against Vtg was directly immobilized on an antibody-binding Staphylococcal protein A matrix (SpA) without the need for prior purification. Under the unique elution conditions, the Vtg protein can be eluted out alone without any leaked specific antibody. The developed method was further used to purify Vtg from whole-body homogenate of Chinese rare minnow. Compared with previous purification methods, the isolated Vtg fraction by this method displays higher purity and well-preserved structure integrity. Moreover, our method is eight times faster. The simple one-step protein A-based specific antibody immobilization and its associated elution strategy may be extended to a number of antibodies for various application purposes, highlighting the paramount advantages over traditional immunoprecipitation and covalent immobilization of antibodies, and suggesting a wide range of promising applications in environmental monitoring and proteome analysis.     

Absolute Minimal Sampling of Homonuclear 2D NMR TOCSY Spectra for High‐Throughput Applications of Complex Mixtures

Modern applications of 2D NMR spectroscopy to diagnostic screening, metabolomics, quality control, and other high‐throughput applications are often limited by the time‐consuming sampling requirements along the indirect time domain t ₁. 2D total correlation spectroscopy (TOCSY) provides unique spin connectivity information for the analysis of a large number of compounds in complex mixtures, but standard methods typically require >100 t ₁ increments for an accurate spectral reconstruction, rendering these experiments ineffective for high‐throughput applications. For a complex metabolite mixture it is demonstrated that absolute minimal sampling (AMS), based on direct fitting of resonance frequencies and amplitudes in the time domain, yields an accurate spectral reconstruction of TOCSY spectra using as few as 16 t ₁ points. This permits the rapid collection of homonuclear 2D NMR experiments at high resolution with measurement times that previously were only the realm of 1D experiments.     

Synthesis and characterisation of rubbing-resistant polyimides with naphthalimide side-chain for liquid-crystal alignment layers

A novel diamine with a side-chain containing naphthalimide ring and non-polar alkyl end group, N-octyl-4-(3,5-dinitrobenzoyl)-amido-1,8-naphthalimide (N8), was synthesised and its chemical structure was confirmed by FTIR (fourier transform infrared) spectroscopy and nuclear magnetic resonance spectroscopy (¹H-NMR). Then, a new family of polyimides (PIs) containing naphthalimide unit in the side-chains has been successfully synthesised by reaction of 4,4′-oxydiphthalic anhydride (ODPA) and 3,3′-dimethyl-4,4′-methylenediamine (DMMDA) with the novel functional diamine N8. The obtained polymers showed excellent solubility in a broad range of solvents, including tetrahydrofuran. Thermal properties of polymers were good enough to permit the use of these PIs on liquid-crystal displays (LCDs) applications. Alignment films obtained by casting offered outstanding rubbing-resistant ability, meanwhile kept the pretilt angle high above 89°. The PI seems to be prospective materials for alignment layers in LCDs.     

Photoreaction Cycle of Phoborhodopsin (Sensory Rhodopsin II) from Halobacterium salinarum Expressed in Escherichia coli

Phoborhodopsin (pR; also called sensory rhodopsin II, SRII) is a photoreceptor of negative phototaxis of halobacteria. The studies of photochemical properties of this pigment are not many because the amount of the pigment is small and the stability is low. Recently an expression system of phoborhodopsin from Halobacterium salinarum (called salinarum phoborhodopsin, spR; also HsSRII) in Escherichia coli and purification method has been developed (Mironova et al. [2005] FEBS Lett., 579, 3147–3151), which enables detailed studies on the photochemical properties of spR. In the present work, the photoreaction cycle of E. coli-expressed spR was studied by low-temperature spectroscopy and flash photolysis. Formations of K-, M-, O-like intermediates and P480 were reconfirmed as reported previously. New findings are as follows. (1) The K-like intermediate (P500) was a mixture of two photoproducts. (2) Formation of L-like intermediate (P482) was observed by low-temperature spectroscopy and flash photolysis at room temperature. (3) On long irradiation of spR at 20°C, formation of a new photoproduct P370 was observed and it decayed to the original spR in the dark with a decay half time of 190 min. Based on these results the similarities and dissimilarities between spR and ppR are discussed.     

Identification of an impurity in synthetically prepared GAZT: 4″,5″-dehydro-GAZT

A minor impurity was recorded by hplc during the final purification of synthetically prepared samples of the 5′-0-glucuronide of azidothymidine (GAZT). Following isolation of a small quantity of this impurity by hplc, elucidation of the structure was undertaken. A combination of two-dimensional nmr methods in conjunction with infrared spectroscopy and mass spectrometry were utilized to unequivocally identify the impurity as the 4″,5″-dehydro-5′-O-glucuronide of AZT (DGAZT).     

Thiol–Yne Click Reactions on Alkynyl–Dopamine‐Modified Reduced Graphene Oxide

The large‐scale preparation of graphene is of great importance due to its potential applications in various fields. We report herein a simple method for the simultaneous exfoliation and reduction of graphene oxide (GO) to reduced GO (rGO) by using alkynyl‐terminated dopamine as the reducing agent. The reaction was performed under mild conditions to yield rGO functionalized with the dopamine derivative. The chemical reactivity of the alkynyl function was demonstrated by post‐functionalization with two thiolated precursors, namely 6‐(ferrocenyl)hexanethiol and 1H,1H,2H,2H‐perfluorodecanethiol. X‐ray photoelectron spectroscopy, UV/Vis spectrophotometry, Raman spectroscopy, conductivity measurements, and cyclic voltammetry were used to characterize the resulting surfaces.     

Green synthesis and characterizations of Nickel oxide nanoparticles using leaf extract of Rhamnus virgata and their potential biological applications

In the present report, Nickel oxide nanoparticles (NiONPs) were synthesized using Rhamnus virgata (Roxb.) (Family: Rhamnaceae) as a potential stabilizing, reducing and chelating agent. The formation, morphology, structure and other physicochemical properties of resulting NiONPs were characterized by Ultra violet spectroscopy, X‐ray diffraction (XRD), Fourier Transform Infrared analysis (FTIR), Scanning electron microscopy (SEM), Energy‐dispersive‐spectroscopy (EDS), Transmission electron microscopy (TEM), Raman spectroscopy and dynamic light scattering (DLS). Detailed in vitro biological activities revealed significant therapeutic potential for NiONPs. The antimicrobial efficacy of biogenic NiONPs was demonstrated against five different gram positive and gram negative bacterial strains. Klebsiella pneumoniae and Pseudomonas aeruginosa (MIC: 125 μg/mL) were found to be the least susceptible and Bacillus subtilis (MIC: 31.25 μg/mL) was found to be the most susceptible strain to NiONPs. Biogenic NiONPs were reported to be highly potent against HepG2 cells (IC₅₀: 29.68 μg/ml). Moderate antileishmanial activity against Leishmania tropica (KMH₂₃) promastigotes (IC₅₀: 10.62 μg/ml) and amastigotes (IC₅₀: 27.58 μg/ml) cultures are reported. The cytotoxic activity was studied using brine shrimps and their IC₅₀ value was recorded as 43.73 μg/ml. For toxicological assessment, NiONPs were found compatible towards human RBCs (IC₅₀: > 200 μg/ml) and macrophages (IC₅₀: > 200 μg/ml), deeming particles safe for various applications in nanomedicines. Moderate antioxidant activities: total antioxidant capacity (TAC) (51.43%), 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) activity (70.36%) and total reducing power (TRP) (45%) are reported for NiONPs. In addition, protein kinase and alpha amylase inhibition assays were also performed. Our results concluded that Rhamnus virgata synthesized NiONPs could find important biomedical applications with low cytotoxicity to normal cells.     

5‐O‐Caffeoylshikimic acid from Solanum somalense leaves: Advantage of centrifugal partition chromatography over conventional column chromatography

Solanum somalense leaves, used in Djibouti for their medicinal properties, were extracted by MeOH. Because of the high polyphenol and flavonoid contents of the extract, respectively, determined at 80.80 ± 2.13 mg gallic acid equivalent/g dry weight and 24.4 ± 1.01 mg quercetin equivalent/g dry weight, the isolation and purification of the main polyphenols were carried out by silica gel column chromatography and centrifugal partition chromatography. Column chromatography led to 11 enriched fractions requiring further purification, while centrifugal partition chromatography allowed the easy recovery of the main compound of the extract. In a solvent system composed of CHCl₃/MeOH/H₂O (9.5:10:5), 21.8 mg of this compound at 97% purity was obtained leading to a yield of 2.63%. Its structure was established as 5‐O‐caffeoylshikimic acid by mass spectrometry and NMR spectroscopy. This work shows that S. somalense leaves contain very high level of 5‐O‐caffeoylshikimic acid (0.74% dry weight), making it a potential source of production of this secondary metabolite that is not commonly found in nature but could be partly responsible of the medicinal properties of S. somalense leaves.     

Development of a PRiME cartridge purification method for rapid determination of malachite green and leucomalachite green in Chinese softshell turtle

A high‐throughput PRiME (process, robustness, improvements, matrix effects, ease of use) sample purification procedure was developed to simplify the multiple steps of traditional SPE in extracting the malachite green and leucomalachite green in Chinese softshell turtle (Pelodiscus sinensis). The sample loading volume, extracting solvent type, and pH value of the employed PRiME hydrophilic‐lipophilic balance cartridge for sample purification were optimized to be 3 mL, acetonitrile, and pH 5, respectively. In comparison with traditional SPE, the PRiME process is cost‐effective, solvent‐saving, and simple to operate, which only consists of a passing through step without traditional sorbent conditioning and impurity washing. Afterward, eluate was analyzed by ultra‐performance liquid chromatography‐tandem mass spectrometry, and the proposed method was validated for linearity (R² > 0.9992), intraday precision (2.44–3.22%), interday precision (3.28–6.58%), sensitivity (LOD ≤ 0.18 μg/kg and, LOQ ≤ 0.60 μg/kg), and recovery (88.7–94.1%, RSD < 6.79%). The results indicated that the PRiME technique can simplify the sample preparation procedure by avoiding the tedious steps, such as conditioning, washing, etc. It would be of significant interest for environmental and food safety applications in the market of Chinese softshell turtle and related products.     

Supermacroporous hydrophobic affinity sorbents for penicillin acylase purification

Penicillin acylase (PA, EC 3.5.1.11) is used as a raw material in the production of semi-synthetic penicillins. Although there are many methods for PA purification, affinity chromatography is advantageous as it provides efficient one step purification. In this study, poly(2-hydroxyethyl methacrylate) based cryogel column containing hydrophobic N-methacryloyl-L-tryptophan (MATrp) functional monomer as a ligand was prepared. Interaction of MATrp with amino acids in PA structure is the basis of hydrophobic interaction chromatography in this study. PHEMA and PHEMATrp cryogel columns were characterized by surface area measurements, infrared spectroscopy, swelling tests, elemental analysis and scanning electron microscopy (SEM). Initial PA concentration, pH, effect of temperature, amount of ligand, flow rate, ionic strength and time on PA adsorption on PHEMATrp cryogel were investigated. Optimum pH was determined as 5.0 for PA adsorption and maximum adsorption capacity was obtained as 6.40 mg/g. It was observed that adsorption capacity increased with the increasing of temperature. Also, PA adsorption increased up to 0.25 M salt concentration and decreased in higher salt concentrations. Data obtained in this affinity system suggests that hydrophobic interactions are dominant. In the last stage of the study, PA was purified from Penicillium chrysogenum with 76.3% yield and 332.3 purification factor.