One Ligand in Dual Roles: Self‐Assembly of a Bis‐Rhomboidal‐Shaped,Three‐Dimensional Molecular Wheel

A facile high yield, self‐assembly process that leads to a terpyridine‐based, three‐dimensional, bis‐rhomboidal‐shaped, molecular wheel is reported. The desired coordination‐driven supramolecular wheel involves eight structurally distorted tristerpyridine (tpy) ligands possessing a 60° angle between the adjacent tpy units and twelve Zn²⁺ ions. The tpy ligand plays dual roles in the self‐assembly process: two are staggered at 180° to create the internal hub, while six produce the external rim. The wheel can be readily generated by mixing the tpy ligand and Zn²⁺ in a stoichiometric ratio of 2:3; full characterization is provided by ESI‐MS, NMR spectroscopy, and TEM imaging.     

A New Fluorescent Chemosensor for Cu2+ Based on a Dianthracene-Derivative

Abstract

Besides being of interest in photochemistry, photoinduced electron transfer (PET) is a process largely used in the design of fluorescent ion sensing molecules. One of the simplest systems is based on fluorescent aromatic groups linked to amino groups and proposed as possible fluorescent transition metal ion chemosensor [1]. In this case, the fluorescence of the fluorophore “ligths on” when the amino group is complexed. On the other hand, in the absence of metal ions, the fluorescence is quenched by a PET originating from the nitrogen lone electron pairs [2]. We prepared a new fluorescent chemosensor, abbreviated as Ant-NH-O-O-NH-Ant (shown in Fig. 1) in which the intramolecular PET is expected to be efficient. The chemosensor consists of a metal-binding dioxodiamino unit linked to two light-emitting anthracene fragments. This type of supramolecules when irradiated in methanol solution (conc. 1.89—10^?5 M.) at 368 nm displays a characteristic fluorescence spectrum for anthracene group with the most intensive band at 415 nm [Fig. 2(a)]. The emission is slightly enhanced upon coordination of such metal ions as Ni²⁺ and Zn²⁺ by the ligand fragment of the Ant-NH-O-O-NH-Ant molecule [Fig. 2(b) and (d)]. However, much higher intensity of emission is observed in the case of Cu²⁺ complex [see Fig 2(c)]. The fluorescence enhancement is presumably due to suppression of photoinduced fluorophore-to-metal electron-transfer mechanism.     

Self‐Assembled Cyclic Structures from Copper(II) Peptoids

Metal–ligand coordination is a key interaction in the self‐assembly of both biopolymers and synthetic oligomers. Although the binding of metal ions to synthetic proteins and peptides is known to yield high‐order structures, the self‐assembly of peptidomimetic molecules upon metal binding is still challenging. Herein we explore the self‐assembly of three peptoid trimers bearing a bipyridine ligand at their C‐terminus, a benzyl group at their N‐terminus, and a polar group (N‐ethyl‐R) in the middle position (R=OH, OCH₃, or NH₂) upon Cu²⁺ coordination. X‐ray diffraction analysis revealed unique, highly symmetric, dinuclear cyclic structure or aqua‐bridged dinuclear double‐stranded peptoid helicates, formed by the self‐assembly of two peptoid molecules with two Cu²⁺ ions. Only the macrocycle with the highest number of intermolecular hydrogen bonds is stable in solution, while the other two disassemble to their corresponding monometallic complexes.     

Dynamic Assemblies and Photophysical Changes of Zinc Porphyrin Dimer Regulated by N-Containing Ligands

Zinc porphyrin dimer （1） has been designed and synthesized as a novel host of N-containing ligands. The assembly behavior and photophysical changes of its host-guest complexes were evaluated by IH NMR, fluorescence, and UV-visible titrations, and the processes reveal that the host-guest assembly first creates a stable sandwich complex, then an axial coordination equilibrium appears between the sandwich complex and free ligand. The changes of absorption spectra of the assembly processes rely on the stabilities of the complexes, and fluorescence quenching depends on the axial coordination equilibrium, which indicates that the axial ligation/de-ligation dynamics is indeed a pathway from the excited state to the ground state for metalloporphyrin complexes.     

Radiative decay channel assessment to understand the sensing mechanism of a fluorescent turn-on Al3+ chemosensor

The turn-on luminescent chemosensor [2-Hydroxy-1-naphthaldehyde-(2-pyridyl) hydrazone] (L), selective to Al³⁺ ions, was studied by means of density functional theory (DFT) and time-dependent-DFT quantum mechanics calculations. The UV-Vis absorption and the radiative channel from the adiabatic S₁ excited state were assessed in order to elucidate the selective sensing mechanism of L to Al³⁺ ions. We found that twisted intramolecular charge transfer (TICT) and photoelectron transfer (PET), which alter the emissive state, are responsible for the luminescence quenching in L. After coordination with Al³⁺, the TICT is blocked, and PET is no longer possible. So, the emission of the coordination complex is activated, and a fluorescence effect enhanced by chelation is observed. For compounds with Zn²⁺ and Cd²⁺, the luminescence quenching is caused by PET, while for Ni²⁺, ligand to metal charge transfer is the prominent mechanism. To go into more detail, the metal-ligand interaction was analyzed via the Morokuma-Ziegler energy decomposition scheme and the natural orbital of chemical valence.     

Double Metal Ions Competitively Control the Guest‐Sensing Process: A Facile Approach to Stimuli‐Responsive Supramolecular Gels

A facile approach to the design of stimuli‐responsive supramolecular gels (SRSGs) termed double‐metal‐ion competitive coordination control is reported. By this means, the fluorescence signals and guest‐selective responsiveness of the SRSGs are controlled by the competitive coordination of two different metal ions with the gelators and the target guest. To demonstrate this approach, a gelator G2 based on multiple self‐assembly driving forces was synthesized. G2 could form Ca²⁺‐coordinated metallogel CaG with strong aggregation‐induced emission (AIE). Doping of CaG with Cu²⁺ results in AIE quenching of CaG and formation of Ca²⁺‐ and Cu²⁺‐based metallogel CaCuG. CaCuG could fluorescently detect CN^? with specific selectivity through the competitive coordination of CN^? with the Cu²⁺ and the coordination of Ca²⁺ with G2 again. This approach may open up routes to novel stimuli‐responsive supramolecular materials.     

Determination of Er3+ using a highly selective and easy-to-synthesize fluorescent probe based on Rhodamine 6G

A inducible fluorescent ligand 2-(2-(2-amino-ethylamino) ethyl)-3′,6′- bis (ethylamino)-2′, 7′-dimethy-lspiro[isoindoline-1,9′-xanthen]-3-one was synthesized and used as a fluorescent probe to detect Er³⁺. Er³⁺ could induce the structural transformation of the fluorescent ligand, resulting in a sharp fluorescence emission in a buffered solution. The fluorescence intensity of the fluorescent ligand was enhanced quantitatively with an increase in the concentration of erbium ion. The detection limit of Er³⁺ was 3.0 × 10^?10 mol L^?1 (50 ng L^?1) under optimized conditions. The method applied for the determination of Er³⁺ in four alloy samples had achieved satisfactory results.     

Anthrone-spirolactam and quinoline hybrid based sensor for selective fluorescent detection of Fe3+ ions

The synthesis of a novel, and highly selective Fe³⁺ ion sensor based on anthrone-spirolactam and its quinoline hybrid ligand is reported. The designed ligand displayed selective detection of Fe³⁺ ions with enhanced fluorescence emission. The complexation of Fe³⁺ ion led to a red shift of 32 nm from 420 nm to 452 nm, and a several fold increase in intensity with fluorescent green emission. The complexation (detection) of Fe³⁺ ions with ligand resulted in chelation enhanced fluorescence and intramolecular charge transfer through the inhibition of C=N isomerization. This hybrid sensor shows high sensitivity and selectivity, spontaneous response, and works on a wide pH range a minimum detection limit of 6.83 × 10⁻⁸ M. Importantly, the sensor works through the fluorescence turn-on mechanism that overcomes the paramagnetic effect of Fe³⁺ ions. The binding mechanism between the ligand and the Fe³⁺ ions was established from the Job's plot method, optical studies, Fourier transfor infrared spectroscopy, NMR titration, fluorescence life-time studies, and density functional theory optimization. The sensor displayed excellent results in the quantification of Fe³⁺ ions from real water samples. Furthermore, due to its biocompatibility nature, fluorescent spotting of Fe³⁺ ions in live cells revealed its bioimaging applications.     

Bis(tetraethylthiophosphoramidoyl)methylamine as an electrochemical ligand for the simultaneous detection of iron and copper bivalent cations

A new thiophosphoramide-based electrochemical ligand was synthesized and used as a bivalent metallic cation sensor. Electrochemical studies reveal a sensitive detection process toward various cations such as Fe²⁺, Co²⁺, Ni²⁺, Cd²⁺, Cu²⁺ and Ca²⁺. The chelation process was accompanied by dramatic changes in the redox properties of the free ligand. Interestingly, the ligand shows a simultaneous sensing behavior towards iron and copper cations. The oxidation peak potentials of the two complexes can be well separated, allowing sensitive detection. Furthermore, UV–Visible spectra showed redshifts of absorbance bands of the free ligand in the presence of cations due to the coordination of the thiophosphoryl groups. Electrochemical and UV–Visible studies confirmed that the metal-ligand complexes have 1:2 stoichiometry.     

Synthesis, characterization and spectroscopic studies of copolymer of styrene with 4-oxe-4(P-hydroxyl phenylamino) but-2-enoic acid and corresponding fluorescent macromolecular lanthanide(III) complexes

Copolymer of styrene with 4-oxe-4(P-hydroxyl phenylamino) but-2-enoic acid (PSHPEA) and its luminescent lanthanide complexes Ln-PSHPEA (Ln = La, Eu, Tb and Y) were synthesized and characterized by means of elemental analysis, FT-IR, thermogravimetric analysis and fluorescence determination. The results showed that the carboxylic groups on the chain of the copolymer acted as bidentate ligands coordinated to lanthanide ions, but the amido carbonyl groups, amino N and hydroxy groups had not taken part in coordination; the coordination degree of -COO⁻/Ln³⁺ which determined the content of metal ions in the macromolecular complexes, was closely dependent on both the pH value of the solution and the molar ratio of St to 4-oxe-4(P-hydroxyl phenylamino) but-2-enoic acid in the polymer ligand. The fluorescence determination showed that the complexes exhibited characteristic fluorescence with comparatively high brightness and good mono-chromaticity. Typical relationship between emission intensity and Ln³⁺ ions content in macromolecular complexes exhibited some extent of fluorescence concentration quenching in our studies. The emission intensity of Tb-PSHPEA complexes was much stronger than that of Eu-PSHPEA complexes, which was attributed to especial effectivity in transferring energy from the lowest triplet energy level of the ligand onto the excited state (⁵D₀) of Tb³⁺ ion than that (⁵D₄) of Eu³⁺ ion.     

Fluorescent chemosensor based-on naphthol-quinoline for selective detection of aluminum ions

In this study, an assay to quantify the presence of aluminum ions with a receptor containing naphthol and quinoline moieties was developed using a turn-on fluorescence enhancement approach. Upon treatment with aluminum ions, the fluorescence of the receptor was enhanced at 510 nm due to the formation of a complex between the ligand and aluminum ions at room temperature. As the concentration of Al³⁺ was increased, the fluorescence gradually increased. Other metal ions, such as K⁺, Ag⁺, Ca²⁺, Mg²⁺, Zn²⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Cd²⁺, Cr³⁺, Fe³⁺, In³⁺, had no significant effect on the fluorescence.     

Metal-Carboxyl Helical Chain Secondary Units Supported Ion-Exchangeable Anionic Uranyl–Organic Framework

As a less explored avenue, actinide-based metal-organic frameworks (MOFs) are worth studying for the particularity of actinide nodes in coordination behaviour and assembly modes. In this work, an azobenzenetetracarboxylate-based anionic MOF supported by uranyl–carboxyl helical chain units was synthesized, incorporating linear uranyl as the metal centre. This kind of helical chain-type building unit is reported for the first time in uranyl-based MOFs. Structural analysis reveals that the formation of helical chain secondary units can be attributed to restricted equatorial coordination of rigid flat azobenzene ligand to uranyl centres. Meanwhile, this newly-synthesized anionic material has been used to remove Eu³⁺ ions, as a non-radioactive surrogate of Am³⁺ ion, through an ion-exchange process with [(CH₃)₂NH₂]⁺ ions in its open channels, as evidenced by a combination of ¹H NMR spectroscopy, EDS and PXRD.     

A dioxotetraamine fluorenyl ligand and its nickel(II) complex — crystal structure and fluorescent sensing properties in aqueous solution

A new ligand consisting of fluorenyl and dioxotetraaza units, namely, 2,10-diamino-6-(9H-fluoren-9-yl)-4,8-diazaundecane-5,7-dione (L), and its nickel(II) complex were synthesized. The crystal structure of [Ni(H₋₂L)] showed that Ni(II) is in a square planar coordination environment. Studies of solution chemistry of the ligand and its nickel(II) complex indicate that the ligand can form a stable complex with Ni²⁺ ions and fluorescence quenching of the ligand is accompanied by the coordination of the metal ion to the dioxotetraaza unit and electron transfer from the Ni(II) center to fluorenyl in aqueous solution.     

Dynamic Assembly Inclusion Complexes of Tweezer‐type Bis(zinc porphyrin) with 5,15‐Di(4‐pyridyl)porphyrin Derivatives

Dynamic assembly inclusion complexes of tweezer-type bis(zinc porphyrin) (1) with di(4-pyridyl)porphyrin derivatives have been designed and constructed. The complexes are induced by Zn-N coordination, and the weak binding allows the large-size di(4-pyridyl)porphyrin guests in random rotation. Dynamic characteristics of these assemblies, such as ligand exchange and dynamic fluorescence quenching, have been investigated by 1H NMR, UV-Vis and fluorescence spectra. The stability of such assembly has pronounced dependence on the size-matching effect and thermal effect.     

Fluorescence sensing of Cu and Hg by a dipyrene ligand involving an excimer-switch off mechanism

A novel dipyrene ligand 1 has been designed which shows intramolecular excimer formation in solution. Its specific interaction with Cu²⁺ or Hg²⁺ leads to the disruption of the excimer and results in a fluorescence-mediated sensing of these ions in a mixed organic-aqueous solution. Apart from steady-state studies, time-resolved fluorescence measurements also reveal that excimer-switch off caused by metal ion coordination leads to the selective detection of these ions.     

Reversible Self‐Assembly of Carboxylated Peptide‐Functionalized Gold Nanoparticles Driven by Metal‐Ion Coordination

Carboxylated peptide‐functionalized gold nanoparticles (peptide‐GNPs) self‐assemble into two‐ and three‐dimensional nanostructures in the presence of various heavy metal ions (i.e. Pb²⁺, Cd²⁺, Cu²⁺, and Zn²⁺) in aqueous solution. The assembly process is monitored by following the changes in the surface plasmon resonance (SPR) band of gold nanoparticles in a UV/Vis spectrophotometer, which shows the development of a new SPR band in the higher‐wavelength region. The extent of assembly is dependent on the amount of metal ions present in the medium and also the time of assembly. TEM analysis clearly shows formation of two‐ and three‐dimensional nanostructures. The assembly process is completely reversible by addition of alkaline ethylenediaminetetraacetic acid (EDTA) solution. The driving force for the assembly of peptide‐GNPs is mainly metal ion/carboxylate coordination. The color and spectral changes due to this assembly can be used for detection of these heavy‐metal ions in solution.     

A Two‐Dimensional Coordination Compound as a Zinc Ion Selective Luminescent Probe for Biological Applications

A 2D coordination compound {[Cu₂(HL)(N₃)]?ClO₄}_∞ ( 1 ; H₃L=2,6‐bis(hydroxyethyliminoethyl)‐4‐methyl phenol) was synthesized and characterized by single‐crystal X‐ray diffraction to be a polymer in the crystalline state. Each [Cu₂(HL)(N₃)]⁺ species is connected to its adjacent unit by a bridging alkoxide oxygen atom of the ligand to form a helical propagation along the crystallographic a axis. The adjacent helical frameworks are connected by a ligand alcoholic oxygen atom along the crystallographic b axis to produce pleated 2D sheets. In solution, 1 dissociates into [Cu₂(HL)₂(H₃L)]?2H₂O ( 2 ); the monomer displays high selectivity for Zn²⁺ and can be used in HEPES buffer (pH 7.4) as a zinc ion selective luminescent probe for biological application. The system shows a nearly 19‐fold Zn²⁺‐selective chelation‐enhanced fluorescence response in the working buffer. Application of 2 to cultured living cells (B16F10 mouse melanoma and A375 human melanoma) and rat hippocampal slices was also studied by fluorescence microscopy.     

Smart lanthanide coordination polymer fluorescence probe for mercury(II) determination

Lanthanide coordination polymers (LCPs) have recently emerged as attractive biosensor materials due to their flexible components, high tailorable properties and unique luminescence features. In this work, we designed a smart LCP probe of Tb-CIP/AMP {(CIP, ciprofloxacin) (AMP, adenosine monophosphate)} for Hg²⁺ detection by using lanthanide ions as metal nodes, CIP as ligand molecule, and AMP as bridging linker and recognition unit. Tb-CIP/AMP emits strong green luminescence due to the inclusion of AMP, which withdraws the coordinated water molecules and shields Tb³⁺ from the quenching effect of O–H vibration in water molecules. The subsequent addition of Hg²⁺ into Tb-CIP/AMP can strongly quench the fluorescence because of the specific coordination interaction between AMP and Hg²⁺. As a kind of Hg²⁺ nanosensor, the probe exhibited excellent selectivity for Hg²⁺ and high sensitivity with detection limit of 0.16 nM. In addition, the probe has long fluorescence lifetime up to millisecond and has been applied to detect Hg²⁺ in drinking water and human urine samples with satisfactory results. We envision that our strategy, in the future, could be extended to the designation of other LCP-based hypersensitive time-gated luminescence assays in biological media and biomedical imaging.     

New acridine derivatives bearing immobilized azacrown or azathiacrown ligand as fluorescent chemosensors for Hg and Cd

Two new acridine derivatives bearing azacrown or azathiacrown ligand were synthesized as fluorescent chemosensors for Hg²⁺ and Cd²⁺ in aqueous solution. Compounds 1 and 2 displayed selective CHEF (chelation enhanced fluorescence) effects with Hg²⁺ or Cd²⁺ among the metal ions examined. The practical use of these probes was demonstrated by their applications to the detection of Hg²⁺ and Cd²⁺ ions in mammalian cells.     

A water-stable lanthanide-coordination polymer with free Lewis site for fluorescent sensing of Fe3+

A Tb³⁺ based coordination polymer (NKU-115) with free N sites was successfully constructed, featuring strong green light emission and selective quenching response toward Fe³⁺ in aqueous solution.