The unique properties observed for the unsymmetrical macrocyclic compounds with the highly distorted structure

A new class of aza-macrocycles with the highly distorted structure was found to exhibit unique properties. These macrocycles react with various lithium salts to form lithium complexes and their lithium complexation reactions depend on a substituent on the macrocyclic ring; slower rates and larger equilibrium constants were observed for the macrocycle with a bulkier substituent. The irradiation of these macrocycles by UV light was found to lead to the isomerization, and the photoisomerization rate of macrocycle with the bulky substituent was much faster. The highly distorted structure of these macrocycles makes it much easier to change the conformation of macrocyclic skeleton and these macrocycles have a variety of conformations. The factors to govern this conformational change were therefore explored. The solvent effect was examined by ¹H NMR spectroscopy, because these macrocycles have a strong intramolecular hydrogen bond in the ring. As a result, the solvent was found to have a big effect on the ¹H NMR spectra of macrocycles that could be explained in terms of the conformational change of macrocycle. This finding suggests the solvent to be an important way of controlling the conformation.     

The crystal engineering of radiation-sensitive diacetylene cocrystals and salts

In this work we develop photoreactive cocrystals/salts of a commercially-important diacetylene, 10,12-pentacosadiynoic acid (PCDA, 1) and report the first X-ray crystal structures of PCDA based systems. The topochemical reactivity of the system is modified depending on the coformer used and correlates with the structural parameters. Crystallisation of 1 with 4,4′-azopyridine (2), 4,4′-bipyridyl (3), and trans-1,2-bis(4-pyridyl)ethylene (4) results in unreactive 2 : 1 cocrystals or a salt in the case of 4,4′-bipiperidine (5). However, salt formation with morpholine (6), diethylamine (7), and n-butylamine (8), results in highly photoreactive salts 12·7 and 1·8 whose reactivity can be explained using topochemical criteria. The salt 1·6 is also highly photoreactive and is compared to a model morpholinium butanoate salt. Resonance Raman spectroscopy reveals structural details of the photopolymer including its conformational disorder in comparison to less photoactive alkali metal salts and the extent of solid state conversion can be monitored by CP-MAS NMR spectroscopy. We also report an unusual catalysis in which amine evaporation from photopolymerised PCDA ammonium salts effectively acts as a catalyst for polymerisation of PCDA itself. The new photoreactive salts exhibit more reactivity but decreased conjugation compared to the commercial lithium salt and are of considerable practical potential in terms of tunable colours and greater range in UV, X-ray, and γ-ray dosimetry applications.

In this work we develop photoreactive cocrystals/salts of a commercially-important diacetylene, 10,12-pentacosadiynoic acid (PCDA, 1) and report the first X-ray crystal structures of PCDA based systems.     

Design,synthesis, and characterisation of symmetrical bent-core liquid crystalline dimers with diacetylene spacer

Two new symmetrical bent-core liquid crystalline dimers (B-DA4 and B-DA12) bearing diacetylenes spacer and different terminal alkyl chains were successfully synthesised via Sonagashira coupling reaction. The molecular structures of these dimers were confirmed by ¹H nuclear magnetic resonance (NMR), Fourier transform-infrared spectroscopy (FT-IR), Raman spectroscopy, mass spectrometry, and elemental analysis. Their thermal stability and liquid crystalline properties were characterised by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), polarised light microscopy (PLM), and small-angle X-ray scattering (SAXS). Results showed that the diacetylene group may be thermal polymerised at about 260°C far from thermal decomposition. The dimers exhibited monotropic phase behaviour and typical layered-structure phase with long-range order on a length scale of about 6.3 nm was observed. The results mentioned above offer a promising opportunity to design polydiacetylene nanowires by thermal, UV irradiation, or scanning tunnelling microscope (STM) tip-induced polymerisation.     

Photosensitized Solid-state Polymerization of Diacetylenes in Nanoporous TiO2 Structures

In situ topochemical polymerization of two diacetylene monomers within nanoporous TiO₂ thin films was carried out under visible light irradiation. One of the monomers used contains a carboxylic acid group, which could help to link the monomer onto the TiO₂ surface covalently. UV-Vis absorption and Raman studies showed that both monomers were successfully photopolymerized. These results suggest that the covalent linkage of the diacetylene to the nanoparticle through the carboxylic acid group is not needed. Since photopolymerization of diacetylene is typically induced by excitation of the monomer at λ< 300 nm, the observed red shift of the photopolymerization wavelength is attributed to the photosensitization effect of TiO₂. The morphological study of the polydiacetylene/TiO₂ nanocomposite revealed that the diacetylene monomers were polymerized in the vicinity of the TiO₂ nanoparticles. This is attributed to the fact that the electron-transfer process occurs at the interface of nanocrystalline TiO₂ (nc-TiO₂) and the diacetylene monomer and the polymerization is expected to be initiated near the nc-TiO₂ surface. Photopolymerization of the carboxylated diacetylene monomer with other oxides nanoparticles, such as ZnO and SiO₂ was also investigated.     

含2,6-二甲酰胺基吡啶单元的大环合成、结构及其对四面体构型阴离子的络合性质

采用前体二胺N,N’-(3-胺基苯基)-2,6-二甲酰亚胺吡啶(1)和5,5’-亚甲基双水杨醛(2)进行缩合反应得到含酚羟基的 [1+1] 席夫碱大环L1, 将其中席夫碱C=N双键还原得到环状骨架更具柔性的饱和大环L2. 通过1H NMR、FABMS和元素分析等对大环组成进行了表征, 并通过X射线单晶衍射解析了两个大环的晶体结构. 采用UV-Vis 光谱滴定技术对大环与系列阴离子的络合作用进行了考察, 结果表明席夫碱大环L1对四面体构型的阴离子H2PO4-、 HP2O73-和H2P2O72-有明显的选择性识别作用, 进一步通过UV-Vis 光谱、核磁滴定等技术获得了识别反应的配位比及平衡常数(K), L1对3个磷酸阴离子的络合能力依H2PO4-、HP2O73-和H2P2O72-顺序递增。     

Pressure-induced polymerization of diiodobutadiyne in assembled cocrystals

Diiodobutadiyne forms cocrystals with bis(pyridyl)oxalamides in which the diyne alignment is near the ideal parameters for topochemical polymerization to the ordered conjugated polymer, poly(diiododiacetylene) (PIDA). Nonetheless, previous efforts to induce polymerization in these samples via heat or irradiation were unsuccessful. We report here the successful ordered polymerization of diiodobutadiyne in these cocrystals, by subjecting them to high external pressure (0.3-10 GPa). At the lower end of the pressure range, the samples contain primarily monomer, as demonstrated by X-ray diffraction studies, but some polymerization does occur, leading to a pronounced color change from colorless to blue and to the development of intense Raman peaks at 962, 1394, and 2055 cm-1, corresponding to the poly(diacetylene). At higher pressures, the samples turn black and contain primarily polymer, as determined by solid-state NMR and Raman spectroscopy. Both density functional theory calculations (B3LYP/LanL2DZ) and comparisons to authentic samples of PIDA have confirmed the data analysis.     

Synthesis and Spectral Properties of Macrocyclic Compounds Containing 1,3,4‐Thiadiazole Moeties Connected by a Carbon–Oxygen Bridge

The syntheses of 1∶1‐macrocycles 3 (n=1), unsymmetrical macrocycle 5 (m=0, n=1), 2∶2‐macrocycle 5 (m=n=1 and 2), 3∶3 macrocycle 7, and several open‐chain ethereal compounds prepared from 2,5‐dichloro‐1,3,4‐thiadiazole 1 and various polyethylene glycols dianions are described. Structural proofs are afforded by their mass and NMR spectral features. The quaternization studies of a few macrocycles with methyl iodide at elevated temperature furnished a diketo derivative 8 through a facile Hilbert–Johnson reaction.     

Stereospecific solid-state [2+2] autophotocycloaddition of a styryl dye containing a 18-crown-6 fragment

A procedure was developed for the synthesis of a 18-crown-6-containing styryl dye of the pyridine series. Phototransformation products of the dye that formed upon irradiation with visible light in solution, films, and crystals were studied by ¹H and ¹³C NMR spectroscopy and spectrophotometry. Irradiation of solutions of this dye in acetonitrile leads only to reversible E-Z photoisomerization of the C=C bond. Irradiation of a film of the dye induces stereospecific [2+2] photocycloaddition to form exclusively the rctt isomer of tetrasubstituted cyclobutane. The latter was found to undergo base-catalyzed isomerization giving rise to the rcct isomer. X-ray diffraction study showed that photocycloaddition occurs in single crystals without their destruction. The structures of the E isomer of the dye and the resulting rctt isomer of the cyclobutane derivative were established. The characteristic features of the molecular packing of the dye favorable for topochemical photocycloaddition in the crystal and the structural changes that accompany the cyclobutane formation are discussed. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1896–1908, August, 2005.     

Synthesis and studies of crowned dipyrromethenes based macrocycles

Three different meso-substituted new type of crowned dipyrromethene macrocycles were synthesized in decent yields over a sequence of four simple reaction steps using readily available precursors. The macrocycles were thoroughly characterized by HRMS as well as 1D and 2D NMR spectroscopic techniques and the structures of one of the macrocyles in its neutral form and protonated form were determined by X-ray crystallography. The crystal analysis indicated that the macrocycle was distorted in both neutral and protonated forms owing to the presence of flexible aliphatic ether chain. Absorption and electrochemical studies indicated that the properties of macrocycles were dependent on type of aryl group present at the meso-position of dipyrrin moiety of crowned dipyrromethene macrocycle. The preliminary studies indicated that the crowned dipyrromethene macrocycles can act as specific colorimetric optical sensor for Cu²⁺ ion.     

Some novel photosensitive diacetylene diurethanes and their mixtures in common polymers

Some new octa-3,5-diynylene diurethanes were prepared using 3-butyn-1-ol, and all were found to be highly light-sensitive and to undergo topochemical polymerization on exposure to irradiation. The di-n-octyldiurethane was mixed with vinyl polymers such as poly(vinyl acetate) and poly(N,N-dimethylamino-ethyl methacrylate) and the mixtures were made into thin films by spin coating. The films were then irradiated by an electron beam to polymerize the diacetylene. The purple films thus obtained showed third-order nonlinear susceptibility, χ⁽³⁾, of the order of 10⁻¹⁰–10⁻¹¹ e.s.u.     

Synthesis and Structure Elucidation of Large Phosphorus Macrocycles

The simple reaction between 1,ω-diamino derivatives and R-bis-(dimethylamino)-phosphane (R = CH₃, C₆H₅), followed by an oxidation step led to the formation of the expected macrocyclic phosphorus compounds. By this way 17- to 27-membered macrocycles were easily obtained. During the synthesis, the formation of dimeric (40- and 52-membered rings) and trimeric (78-membered rings) macrocyclic species were obtained from 3 and 5 and fully characterized by NMR and mass spectrometry. The P(III) phosphorus species exchange in solution and the macrocycle/oligomers ratio is temperature and concentration dependent. The crystal structure analysis of macrocycles 1, 5, 7 and 8 show that voids are minimized in the solid so that the macrocyclic cavity is filled up with part of the molecule itself or with a guest molecule, when the size of the macrocycle does not allow molecular folding for self-filling the cavity. Dedicated to the memory of Prof. Jean-Bernard Robert     

Cooperative Self‐Assembly of Pyridine‐2,6‐Diimine‐Linked Macrocycles into Mechanically Robust Nanotubes

Nanotubes assembled from macrocyclic precursors offer a unique combination of low dimensionality, structural rigidity, and distinct interior and exterior microenvironments. Usually the weak stacking energies of macrocycles limit the length and mechanical strength of the resultant nanotubes. Imine‐linked macrocycles were recently found to assemble into high‐aspect ratio (>10³), lyotropic nanotubes in the presence of excess acid. Yet these harsh conditions are incompatible with many functional groups and processing methods, and lower acid loadings instead catalyze macrocycle degradation. Here we report pyridine‐2,6‐diimine‐linked macrocycles that assemble into high‐aspect ratio nanotubes in the presence of less than 1 equiv of CF₃CO₂H per macrocycle. Analysis by gel permeation chromatography and fluorescence spectroscopy revealed a cooperative self‐assembly mechanism. The low acid concentrations needed to induce assembly enabled nanofibers to be obtained by touch‐spinning, which exhibit higher Young's moduli (1.33 GPa) than many synthetic polymers and biological filaments. These findings represent a breakthrough in the design of inverse chromonic liquid crystals, as assembly under such mild conditions will enable the design of structurally diverse and mechanically robust nanotubes from synthetically accessible macrocycles.     

Synthesis of a new 24-membered tetramide macrocycle and X-ray crystal structure determination

The synthesis and characterization of a new 24-membered tetramide macrocycle (6) related to Leigh's macrocycles and catenanes is reported. The replacement of p-xylylenediamine (Leigh) by m-xylylenediamine (this work) strongly modifies the geometry and properties of the new macrocycle. NMR spectroscopy (in DMSO?d₆ solution) and X-ray crystallography have been used to characterize compound 6. The structural features in the crystal (conformational aspects and H-bonding) have been discussed comparatively to two similar macrocycles NEWHIJ and UJUNOC.     

Reactions and structural changes during thermal annealing in a semicrystalline,aromatic diacetylene‐containing polyester

Thermally induced solid‐state reactions and microstructure changes in a high molar mass, semicrystalline, aromatic diacetylene‐containing polyester, poly[2,4‐hexadiyn‐1,6‐ylene terephthalate], were investigated with a combination of laser Raman spectroscopy, differential scanning calorimetry, and wide‐angle X‐ray diffraction analysis. The study has provided some new insights into the rather complex solid‐state reactions in the semicrystalline diacetylene‐containing polyester. Results suggest that, in addition to the usual desired solid‐state topochemical crosspolymerization in the crystalline region, a certain degree of random crosslinking reaction occurs in the amorphous region, especially when the annealing is carried out above the glass transition. After prolonged annealing or annealing at a higher temperature, a further reaction involving the formed polydiacetylene chains may occur, as evident from the reduction in crystallinity and even complete loss of crystallinity. An attempt has been made to separate the contribution of the topochemical reaction from the overlapping exothermic activities in the differential scanning calorimetry curves via subtraction. This allows the monitoring of the crystalline‐phase solid‐state topochemical crosspolymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2354–2363, 2002     

Double Cycloadditive Macrocyclization: An Efficient Method for Cyclophane

A series of macrocycles containing isoxazoline and [1,4,2]dioxazole were synthesized for the first time. The structures of the newly synthesized macrocycles were characterized and confirmed by IR, ¹H NMR, mass spectra, and elemental analysis. The solid‐state structure of macrocycle ( 6d ) was further studied by single‐crystal X‐ray diffraction analysis.     

Red Ionic Water‐Soluble Imidazolium‐Containing Polydiacetylene

Synthesis of a water‐soluble polydiacetylene has been achieved by topochemical polymerization in the solid state of the bis(N‐methylimidazolium)diacetylene monomer. Structural characterization for the monomer by X‐ray diffraction and NMR spectroscopy supports a photopolymerization initiated at the surface. Characterization of the polymer (NMR, UV and Raman spectroscopy, and dynamic light scattering) is given along with a molecular modelling interpretation of the polymerization in the solid state.

     

Conformational analysis of new 14-membered ring diketal dilactam macrocycles: molecular mechanics, liquid and solid state NMR studies

A conformational study of new diversely substituted 14-membered diketal dilactam macrocycles was conducted by NMR spectroscopy in liquid and solid states, molecular mechanics calculations and, for one compound, a previous X-ray analysis. The results obtained by the different techniques show that the conformations depend closely on whether the molecules are chiral or achiral and on the stereochemistry of the ketal OMe groups. In achiral compounds, the most stable conformation of each compound has, in both the liquid and solid states, the two NH-CO links positioned perpendicular to the macrocycle plane, lending to the trans-7,7′-OMe macrocycles 6b and 7b a rectangular [3434]-type structure. In contrast, in chiral compounds, the most stable conformations are not the same in the liquid and solid phases. In the liquid state the conformations are set by the presence of one or two N₄-H?O_1′, N_4′-H?O₁ intramolecular hydrogen bonds that position the amide group parallel to the macrocycle plane, whereas in the solid state the amide moieties again adopt a perpendicular position which can be stabilized, when the 3-R substituent is not too bulky, by intermolecular N-H?OC bonds between parallel sheets, and exceptionally, in the cis-7,7′-OMe-3,3′-Ph compound 1c, by a π-π stacking effect between the phenyl groups.     

Formation of a Macrocycles‐in‐a‐Macrocycle Superstructure with All‐gauche Conformation by Reversible Radical Association

The formation of an unprecedented macrocycles‐in‐a‐macrocycle (MIM) superstructure by reversible radical–radical association of a triphenylamine based monomer terminated with three dicyanomethyl radicals is presented. The reaction yield is nearly quantitative and the obtained macrocycle contains three small dimeric macrocycles according to X‐ray crystallographic analysis. The six monomer molecules are linked by nine long dynamic covalent C(sp³)?C(sp³) bonds that all adopt a gauche conformation. Such a conformation favors the formation of a MIM structure rather than a 2D network with an all‐anti conformation. Two enantiomers with left‐/ right‐handed chirality exist in the single crystals of the superstructure.     

Synthesis of Shape‐Persistent Macrocycles with Three 1,8‐Diazaanthracene Units and Their Packing in the Single Crystal

The synthesis of four shape‐persistent macrocycles with three 1,8‐diazaanthracene units each is reported ( 2 , 3 a – 3 c ). For two of them single crystals could be obtained and the structures in the crystal be solved. The structures reveal that macrocycle 2 self‐dimerizes in the solid state; surprisingly it also forms a stable dimer in solution. The reason for this is seen in unusually efficient dispersion interactions as a consequence of the large contact areas in the dimer. All macrocycles are assessed as to their applicability in lateral polymerizations in the single crystal as well as in solution.     

Synthesis of macrocyclic ligands incorporating sulfur and furan subunits

Abstract

Polyammonium macrocycles containing sulfur and furan units in the macrocyclic ring have been synthesized and studied for ATPase activity. The synthetic methodology involved using tosyl protection for the amines and the formation of macrocyclic Lactams, followed by reduction using borane in THF. Deprotection of the tosylated forms of the macrocycle was accomplished using sodium in butanol for the furan macrocycles, and HBr in HOAc for the sulfur containing macrocycle. The macrocycles were found to be poor catalysts for ATP hydrolysis compared to other similar polyammonium macrocycles.