Liquid crystalline behaviours of some 3-perfluoroalkylbenzoate esters

A series of 3-perfluoroalkylbenzoate esters are synthesised. They tend to exhibit enantiotropic SmA and SmC phases. The clearing points are decreased with increasing the alkoxy chain length and show odd-even effect. With increasing the fluorocarbon chain length, the melting and clearing points increase; however, the SmC phase is suppressed.     

Liquid crystalline dendrimers containing photoactive cinnamate units

Cinnamate‐containing dendrimers have been prepared by peripheral functionalization of the amine groups of a poly(propyleneimine) dendrimer with 4‐methoxycinnamate‐ or 4‐(N,N‐dimethylamino)cinnamate‐derived units and/or 4‐cyanobiphenyl units in different proportions. The synthesis, full characterization in solution, thermal properties and optical properties of the novel monomers, homodendrimers and codendrimers are reported. The composition of the molecular structure of the codendrimers has been elucidated by matrix assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). These liquid crystalline dendrimers display lamellar SmA mesophases. The codendrimers have been tailored in such a way that the photoactive units and the liquid crystal units absorb in different regions in order to allow better control over the processes induced by light. Linearly polarized UV light irradiation studies performed on thin films of the cinnamate codendrimers show that they are photoresponsive. A photoinduced anisotropy is generated with increasing exposure time, but in‐plane amplification of anisotropy by thermal annealing in the mesophase was not observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

聚苯撑苯并二噻唑(PBT)的耐热性和液晶性研究

PBT溶于甲基磺酸(MSA)和多聚磷酸(PPA)等强酸溶剂中时能形成液晶。用TGA法测定了PBT在氮气和空气中的热分解温度,分别高达690℃和585℃。计算了PBT在氮气中的分解活化能为161 kJ/mol。测定了PBT-MSA体系液晶的退偏振光强度-温度谱和浓度-温度二元液晶区域相图,并发现8％的PBT-PPA体系表现出特殊的退偏光强度-温度特性。液晶和PBT固体的X-衍射图表明液晶状态下沉积的薄膜保持了液晶态的结构,固体小角光散射的H_v图表明非液晶态下沉积的PBT薄膜有球晶结构。     

非离子表面活性剂体系的液晶与自发乳化(I)

乳状液广泛用干工、农业、医药、食品与化妆品生产中．近年来，许多研究集中在如何制备颗粒细小、均匀的乳状液方面．用通常的机械法制备细小乳状液，需要较昂贵的设备和消耗较多能量，其颗粒分布仍不够均匀．近来，一些研究发现，有可能采用物理化学方法，而不需乳化机械，只要选用合适的乳化剂，在轻微的搅拌下，可制得颗粒细小而均匀的微小乳状液[1，2]．我们在采用反相乳化法和自发形成O／W型微小乳状液的研究中发现，在自发乳化的中间过程中常有液晶棺和粘稠的胶状物形成[3，4]．有关液晶对乳状液的稳定作用前人有过较多研究[5]，但在…     

Revisiting (hydroxypropyl) cellulose (HPC)/water liquid crystalline system

ABSTRACT

The discovery of a cholesteric liquid crystalline phase in concentrated aqueous solutions of (hydroxypropyl)cellulose (HPC) dates back to the 1970s. Due to its biocompatibility, low cost and ease of conversion to fibres and films, HPC is still the target of numerous studies. In this article, some of the properties of the HPC/water lyotropic system are reviewed, and original results describing a humidity-generated instability on HPC fibres are presented. The use of HPC films which respond to external stimuli is highlighted. In particular, novel applications include the manufacture of soft motors driven by a difference of humidity, and the production of electro-optical cells when the solid films are used in conjunction with low molecular mass thermotropic mesogens.     

Liquid crystalline polymers XVI*. Thermotropic liquid crystalline copoly(arylidene-ether)/TiO2 Nanocomposites: synthesis,characterisation and applications

ABSTRACT

Polymer nanocomposites are already a part of many important worldwide businesses. Among many nanocomposite precursors, titanium dioxide (TiO₂) nanopowder is increasingly being investigated due to its special properties. In this work, the feasibility of synthesising a new series of materials, copoly(arylidene-ether)/titanium dioxide nanocomposites, using in-situ copolymerisation technique has been investigated. This can be performed by the interaction of both cyclohexanone and 4-tert-butylcyclohexanone monomers with 4,4′-diformyl-2,2′-dimethoxy-α,ω-diphenoxyalkanes Ia–e, respectively, using different additions of titanium dioxide-P25. The structure of the prepared nanocomposites IIa–e/TiO₂ (0.2–3.0%) was confirmed by elemental analysis (energy dispersive X-ray spectroscopy) and spectral data (Fourier transform-infrared [FT-IR]). FT-IR verified the dispersion of nanofillers in the copolymer. Then, the characterisation and applications of these nanocomposites are extensively discussed depending on the investigation of how the addition of titanium dioxide nanoparticles affected on their properties using various techniques, such as X-ray diffraction, SEM, transmission electron microscopy, Water Contact Angle (WCA), thermogravimetric analysis, differential thermogravimetric, differential thermal analysis (DTA), polarising optical microscope and UV–vis absorption spectroscopy. The nanoparticles affected on the copolymer thermal behaviour in different ways (discrepancy results) depending on how these nanoparticles are dispersed in the copolymer matrix. UV–vis absorption spectra displayed a decrease in the optical band gap of some nanocomposites, which resulted from the addition of titanium dioxide to these copolymers, and this can improve the efficiency of them as organic emitting materials.     

Liquid crystalline polymers XV. Synthesis,properties and cytotoxicity of photoresponsive thermotropic liquid crystalline copoly(arylidene-ether)s based on 4-tert-butylcyclohexanone and cyclohexanone moieties in the main chain

A new series of photoresponsive thermotropic liquid crystalline copoly(arylidene-ether)s based on both 4-tert-butylcyclohexanone and cyclohexanone moieties in the main chain were synthesised using solution polycondensation technique of both with different 4,4?-diformyl-α,ω-diphenoxyalkane derivatives. Two model compounds were synthesised from the reaction of each cycloalkanone monomer with benzaldehyde, and their structures were determined using single crystal X-ray diffraction. The structure of the monomers and copolymers was confirmed by elemental and spectral analyses. In addition, the thermal stabilities of these copolymers were evaluated by thermogravimetric analysis. We performed both differential scanning calorimertric and polarised optical microscopic measurements to investigate the thermotropic liquid crystalline properties of synthesised copolymers. The UV?Vis absorption spectroscopy of the liquid crystalline copoly(arylidene-ether) 6f revealed that the system undergoes Entgegen/Zusammen (E/Z) photoisomerisation using UV lamp (450 nm). Moreover, the various characteristics of the prepared copolymers including: solubility, X-ray diffraction analysis, gel permeation chromatography (GPC) and scanning electron microscopy were determined and discussed. The cytotoxicity of the model compounds and selected examples of these copolymers was tested against MCF-7 breast cancer cells. All tested samples showed considerable results, where 6c copolymer gave the best result; it showed cytotoxicity against MCF-7 cell line with IC₅₀ of 0.26 µM.     

Liquid crystalline behavior and fluorescent property of calix[4]arene containing azobenzene photochromic group

The reaction of 4′-hydroxy-4-methyl azobenzene (1) and 1,6-dibromohexane afforded 6-bromo-1-((4-((4-met hylphenyl)azo)phenyl)oxy)hexane (2), which further reacted with p-tert-butylcalix[4]arene to give the calix[4]arene derivative (3) whose lower rim had been modified by the azobenzene photochromic group. The structure of 3 was characterized by ¹H-nuclear magnetic resonance (NMR) and electrospray ionization-mass spectrometry (ESI-MS). The fluorescence intensity of compound 3 was two to four times higher than that of compounds 1 and 2 as the azobenzene group concentration in the range of 1.6 × 10⁻⁵ to 8.0 × 10⁻⁴ mol/L, indicating that the fluorescence quantum yield of the azobenzene group had been improved through being attached to the calix[4]arene skeleton. The liquid crystalline behavior of compound 3 was studied by polarized microscopy (POM) and differential scan calorimeter (DSC). Compound 3 exhibited the enchased texture of a smectic liquid crystal from 209.4°C to 219.5°C on heating, while 2 exhibited a liquid crystalline phase from 87.4 to 83.2°C on cooling. It was found that the calix[4]arene skeleton was a good platform for conformation immobilization of azobenzene photochromic group and the formation of liquid crystalline. Translated from Chinese Journal of Applied Chemistry, 2006, 23(9): 1023–1026 [译自: 应用化学]     

The synthesis and liquid crystalline behaviour of alkoxy-substituted derivatives of 1,4-bis(phenylethynyl)benzene

Despite the prevalence of organised 1,4-bis(phenylethynyl)benzene derivatives in molecular electronics, the interest in the photophysics of these systems and the common occurrence of phenylethynyl moeties in molecules that exhibit liquid crystalline phases, the phase behaviour of simple alkoxy-substituted 1,4-bis(phenylethynyl)benzene derivatives has not yet been described. Two series of 1,4-bis(phenylethynyl)benzene derivatives, i.e. 1-[(4'-alkoxy)phenylethynyl]-4-(phenylethynyl)benzenes (5a-5f) and methyl 4-[(4'-alkoxy)phenylethynyl-4'-(phenylethynyl)] benzoates (18a-18f) [alkoxy = n-C₄H₉ (a), n-C₆H₁₃ (b), n-C₉H₁₉ (c), n-C₁₂H₂₅ (d), n-C₁₄H₂₉ (e), n-C₁₆H₃₃ (f)] have been prepared and characterised. Both series have good chemical stability at temperatures up to 210°C, the derivatives featuring the methyl ester head-group (18a-18f) offering rather higher melting points and generally stabilising a more diverse range of mesophases at higher temperatures than those found for the simpler compounds (5a-5f). Smectic phases are stabilised by the longer alkoxy substituents, whereas for short and intermediate chain lengths of the simpler system (5a-5c) nematic phases dominate. Diffraction analysis was used to identify the SmB_hex phase in (5d-5f) that is stable within a temperature range of approximately 120-140°C. The relationships between the organisation of molecules within these moderate temperature liquid crystalline phases and other self-organised states (e.g. Langmuir-Blodgett films) remain to be explored.     

聚[甲基丙烯酸（磺酸钠烷基酯）]高分子溶致液晶

溶致液晶是两亲分子有序组合体的一种形式.与表面活性剂相比,高分子溶致液晶的研究开展较少,其中以主链型溶致液晶为主,而侧挂型支链高分子溶致液晶报导极少[1-3],但含有离子的不同烷基侧链的高聚物在溶液中自织组成液晶的规律性和性质的研究,在基础理论和应用方面皆有重?..     

Photomechanical effects in liquid crystalline polymer networks and elastomers

Liquid crystals are widely employed as stimuli‐responsive materials. Liquid crystallinity can be retained in polymeric form. Photoinduced mechanical effects in liquid crystalline polymer networks and elastomers have been a topic of considerable recent research. This review details the historical underpinnings and recent advances in the synthesis and the corresponding photomechanical response of these materials. In nearly all cases, the conversion of light into mechanical work has employed azobenzene as either a guest additive or covalently attached to the network. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 695–705     

Smectic ordering in side-chain liquid crystalline polymers (LCPs) and in LCP-silica nanocomposites

The mesophase behaviour of a side-chain liquid crystalline polyacrylate (LCP) grown by drying a solution has been investigated. This LCP, characterised by a short spacer (four carbon atoms) and a long tail (10 carbon atoms), displays, at increasing temperatures, SmC and SmA_d phases. The effect of the mean molecular weight, i.e. the mean number of side chains per polyacrylate main chain (18 and 51) on the lamellar width, was studied. LCP-silica nanocomposites have been synthesised by a sol-gel process in the presence of LCP in the solution, followed by subcritical drying. The mesophase behaviour of these nanocomposites was compared to that of the corresponding bulk LCP. The experimental methods were polarised optical microscopy, differential scanning calorimetry and synchrotron X-ray scattering.     

Liquid crystalline supramolecular crosslinked polymer complexes of ditopic rylenebisimides and P4VP

Perylenebisimide and naphthalenebisimide (PBI‐PDP and NBI‐PDP) end functionalized with pentadecyl phenol is designed as ditopic hydrogen bonding acceptors to form supramolecular crosslinked network with poly(4‐vinyl pyridine) (P4VP). The pristine PBI‐PDP has been grown as single crystals from DCM‐MeOH (dichloromethane‐methanol) mixture at room temperature, which revealed a P21 space group. Noticeably, the pentadecyl alkyl chain shields the aromatic perylene core on both sides resulting in the absence of π–π interaction in single‐crystal assembly. The naphthalenebisimide derivative exhibits thermotropic liquid crystalline behavior, while both the molecules exhibits lyotropic liquid crystalline phases in tetrahydrofuran (THF), which were characterized using a combination of differential scanning calorimeter, X‐ray diffraction, and polarized light microscopy. The hydrogen‐bonded complex of both the rylenebisimides with P4VP preserves the mesomorphic properties in THF. The electron transport mobility measured by space charge limited current measurements reveals a two orders of magnitude increase in the charge transport in the P4VP complex compared to that of the pristine molecule. The average electron mobility obtained is μ _e,avg: 10^?3 cm²/Vs for P4VP‐PBI compared to μ _e,avg: 10^?5 cm²/Vs for pristine PBI derivative. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 951–959     

4,4'-二(4-烯丙氧基苯甲酸)联苯酯的合成及其液晶性能

以3-溴丙烯、4-羟基苯甲酸和4,4'-二羟基联苯为主要原料,经Williamson醚化、羧酸酰化和酯化反应合成了一种新的液晶单体--4,4'-二(4-烯丙氧基苯甲酸)联苯酯(1),用~1H NMR,~(13)C NMR,FT-IR,DSC,TGA和POM对其分子结构和液晶性能进行了表征.结果表明1呈现向列相,具有较高的熔点、液晶清亮点和较宽的液晶相温度范围.     

μ-氧-双[meso-四(对烷氧基苯基)卟啉合铁(III)]的合成、表征和液晶性

设计合成了未见文献报道的μ-氧-双[meso-四(对烷氧基苯基)卟啉合铁(III)]配合物9个, 研究了其合成、分离、纯化方法, 用MS, ¹H NMR, IR, UV, 元素分析等方法剖析确证了目标化合物的结构, 其结构我们认为是μ-氧桥联的二聚体结构, 且存在两种典型空间构象结构(重叠式和交叉式), 表现为同一系列化合物存在四类¹H NMR谱. 用差示扫描量热仪和偏光显微镜研究了这9个化合物的液晶性, 发现9个化合物均具有液晶性, 多为升温降温互变液晶, 具有丝状光学织构. 有一至三个中介相, 相变起始温度最低为－6 ℃, 最高为210 ℃; 相变区间最宽为301 ℃, 最窄为50 ℃; 清亮点(T_c)最高315 ℃, 最低147 ℃. 考察了烷氧基链长、配位金属离子及配合物分子空间结构对液晶性能的影响. 我们认为这种μ-氧桥联的二聚体结构比单层平面卟啉及其金属配合物具有更好的液晶性.     

Synthesis and properties of reactive liquid crystal monomers and side-chain liquid crystalline polymers

Two nematic liquid crystal (LC) monomers containing double bonds in the side chain were designed and synthesised. Length of the side groups varied from 1 to 2 methylene units. The side-chain polymers were synthesised by hydrosilylation reaction. The molecular structures of the intermediates and the LC monomers were characterised by Fourier transform infrared, elemental analysis and nuclear magnetic resonance spectroscopy. The thermal phase behaviour of the monomers and polymers were investigated by differential scanning calorimetry and polar optical microscopy coupled with hot stage. The LC monomers showed only one nematic mesophase in the cooling process. And, the two polymers exhibit an enantiotroppic nematic mesophase either in the heating or in the cooling process.     

Chemistry of acyl(imidoyl)ketenes

Thermal decarbonylation of 3-p-toluoylpyrrolo[2,1-c][1,4]benzoxazine-1,2,4-trione affords (2-oxo-1,4-benzoxazin-3-yl)(p-toluoyl)ketene. The latter enters into the [4+2]-cycloaddition reaction withp-bromobenzylidene-p-anisidine to form 1-p-bromophenyl-2-p-methoxyphenyl-4-p-toluoyl-1,2-dihydropyrimidino[4,3-c][1,4]benzoxazine-3,5-dione. The molecular and crystal structure of the title compound was studied by X-ray diffraction analysis. For Part 1, see Ref. 6; for Part 2, see Ref. 5. Deceased Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 614–617, March, 1999.     

胆甾型侧链液晶共聚物的研究

合成并表征了两个胆甾型液晶烯类单位以及它们分别与辛烯－１，二氧化硫进行自由基共聚合得到的一系列不同组成的胆甾型侧链液晶三元共聚砜。研究结果表明：该共聚砜的两个液晶热转变温度均随其中辛烯－１单体单元组份含量的增加而降低。     

盘状液晶材料（1）聚集态结构及分子工程

介绍了盘状液晶材料的相分类和不同聚集态结构的特点，并对盘状液晶体系的分子工程和其它扩展性研究进展了综述。     

Liquid crystalline epoxy resin with improved thermal conductivity by intermolecular dipole–dipole interactions

To address tremendous needs for developing efficiently heat dissipating materials with lightweights, a series of liquid crystalline epoxy resins (LCEs) are designed and synthesized as thermally conductive matrix. All prepared LCEs possess epoxies at the molecular side positions and cyanobiphenyl mesogenic end groups. Based on several experimental results such as differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction, it is found that the LCEs exhibited liquid crystalline mesophases. When LCE is cured with a diamine crosslinker, the cured LCE maintains the oriented LC domain formed in the uncured state, ascribing to a presence of dipole–diploe and π–π interactions between cyanobiphenyl mesogenic end groups. Due to the anisotropic molecular orientation, the cured LCE exhibits a high thermal conductivity of 0.46 W m^?1 K^?1, which is higher than those of commercially available crystalline or amorphous epoxy resins. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 708–715