Synthesis and characterization of thermoresponsive amphiphilic block copolymers incorporating a poly(ethylene oxide‐stat‐propylene oxide) block

Amphiphilic BuO‐(PEO‐stat‐PPO)‐block‐PLA‐OH diblock and MeO‐PEO‐block‐(PEO‐stat‐PPO)‐block‐PLA‐OH triblock copolymers incorporating thermoresponsive poly(ethylene oxide‐stat‐propylene oxide) (PEO‐stat‐PPO) blocks were prepared by ring‐opening polymerization of lactide (LA) initiated by macroinitiators formed from treating BuO‐(PEO‐stat‐PPO)‐OH and MeO‐PEO‐block‐(PEO‐stat‐PPO)‐OH with AlEt₃. MeO‐PEO‐block‐(PEO‐stat‐PPO)‐OH was prepared by coupling MeO‐PEO‐OH and HO‐(PEO‐stat‐PPO)‐OH, followed by chromatographic purification. The cloud points of 0.2% aqueous solutions are between 36 and 46 °C for the diblock copolymers that contain a 50 wt % EO thermoresponsive block and 78 °C for the triblock copolymer that contains a 75 wt % EO thermoresponsive block. Variable temperature ¹H NMR spectra recorded on D₂O solutions of the diblock copolymers display no PLA resonances below the cloud point and fairly sharp PLA resonances above the cloud point, suggesting that desolvation of the thermoresponsive block increases the miscibility of the two blocks. Preliminary characterization of the micelles formed in aqueous solutions of BuO‐(PEO‐stat‐PPO)‐block‐PLA‐OH conducted using laser scanning confocal microscopy and pulsed gradient spin echo NMR point to significant changes in the size of the micellar aggregates as a function of temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5156–5167, 2005     

Hydrothermal saccharification of cotton cellulose in dilute aqueous formic acid solution

Cotton cellulose subjected to a dilute aqueous formic acid solution, at acid concentrations up to 1% (w/w), under hydrothermal conditions in a semi-batch reactor was converted into glucose and oligomers with lower degrees of polymerizations (DP). After heating at 250 °C for 60 min in 0.1% (w/w) aqueous formic acid solution, yields of glucose and total sugar with DP = 1 to 9 were 36.6 and 83.8% (100 × gC/gC of initial cotton sample), respectively, and 5-hydroxymethylfurfural was almost as low as 1%. The yields of glucose and oligomers were significantly improved by adding the acid. The reaction was represented by first-order reaction kinetics with regard to (1 ?C x) where x is the conversion based on the total sugar or glucose yield. At 250 °C, the differences in the rate constants (k ? k _water) were proportional to the square root of formic acid concentration.     

Unusual effect of molecular weight and concentration on thermoresponsive behaviors of well‐defined water‐soluble semirigid polymers

A series of water‐soluble semirigid thermoresponsive polymers with well‐defined molecular weights based on mesogen‐jacketed liquid crystal polymers (MJLCPs), poly[bis(N‐hydroxyisopropyl pyrrolidone) 2‐vinylterephthalate] (PHIPPVTA) have been synthesized via reversible addition fragmentation chain transfer (RAFT) polymerization. Dynamic light scattering (DLS) revealed that the novel monomer and polymers have thermoresponsive properties with cloud point in the range between 10 and 90 °C. The cloud point was increased by 56.2 °C when the polymer molecular weight increased from 0.47 × 10⁴ g mol^?1 to 3.69 × 10⁴ g mol^?1. In addition, the cloud point of PHIPPVTA was decreased by 18.8 °C with the increase of polymer concentration from 5 to 10 mg mL^?1. A slight increase (0.1–3.5 °C) of cloud point has been observed after knocking off the end‐groups of PHIPPVTA. Moreover, the cloud point of polymer increased with increasing of its molecular weight with or without the trithiocarbonate end‐groups, which showed the opposite trend comparing with other thermoresponsive polymers with flexible backbones. These polymers show a dramatic solvent isotopic effect that the cloud point in D₂O was lower than in H₂O. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Formation of cooperative amidoaminocalixresorcinarene – methotrexate nanosized aggregates in an aqueous solution and on the surface of gold nanoparticles

Cooperative nanoscale associates of amido(dimethylamino) calixresorcinarenes with pentyl (C5) and undecyl (C11) substituents on lower rim with antitumor drug-methotrexate (MTX) in aqueous solution and on the surface of gold nanoparticles C5@Au and C11@Au were formed. The formation of nanoparticles was investigated by ¹H NMR, NMR FT-PGSE, 2D NOESY, DLS, TEM, spectrophotometry, fluorimetry. It was found that during the interaction of C5 or C11 macrocycles with MTX in aqueous solution, the latter generates dissociation of macrocycles self-associates with formation of cooperative macrocycle–MTX associates of smaller size due to multiple non-covalent interactions, which leads to increase in fluorescence intensity of MTX. In contrast, binding of MTX by macrocyclic associates preorganized as bilayer on surface of gold nanoparticles through electrostatic interactions induces aggregation of C5@Au-MTX or C11@Au-MTX associates, which results in quenching of MTX fluorescence in solution. Such particles have possible potential in the field of binding and delivery of antitumor drugs.     

New Labdane diterpenes from Hedychium yunnanense with cytotoxicity and inhibitory effects on nitric oxide production

Two new labdane diterpenes, hedychenoids A (1) and B (2), were isolated from the rhizomes of Hedychium yunnanense, together with four known ones hedychenone (3), forrestin A (4), villosin (5) and calcaratarin C (6). Their structures were determined on the basis of NMR (1D and 2D) and mass spectroscopic analysis. Compounds 2, 3 and 5 exhibited cytotoxicity against SGC-7901 with IC₅₀ values of 14.88 ± 0.52, 7.08 ± 0.21 and 7.76 ± 0.21 μg/ml, 3 and 5 against HeLa with IC₅₀ values of 9.76 ± 0.48 and 13.24 ± 0.63 μg/ml, respectively. Compounds 2, 5 showed inhibitory effects against nitric oxide production in LPS and IFN-γ-induced RAW 264.7 murine macrophages with IC₅₀ values of 6.57 ± 0.88 and 5.99 ± 1.20 μg/ml, respectively.     

Stimulus‐responsive polymers based on 2‐hydroxypropyl acrylate prepared by RAFT polymerization

Homopolymerization and diblock copolymerization of 2‐hydroxypropyl acrylate (HPA) has been conducted using reversible addition fragmentation chain transfer (RAFT) chemistry in tert‐butanol at 80 °C. PHPA homopolymers were obtained with high conversions and narrow molecular weight distributions over a wide range of target degrees of polymerization. Like its poly(2‐hydroxyethyl methacrylate) isomer, PHPA homopolymer exhibits inverse temperature solubility in dilute aqueous solution, with cloud points increasing systematically on lowering the mean chain length. The nature of the end groups is shown to significantly affect the cloud point, whereas no effect of concentration was observed over the PHPA concentration range investigated. Various thermoresponsive PHPA‐based diblock copolymers were prepared via one‐pot syntheses in which the second block was either permanently hydrophilic or pH‐responsive. Preliminary studies confirmed that poly(ethylene oxide)‐poly(2‐hydroxypropyl acrylate) (PEO₄₅‐PHPA₄₈) and poly(2‐hydroxypropyl acrylate)‐ poly(2‐hydroxyethyl acrylate) (PHPA₄₉‐PHEA₆₈)diblock copolymers formed well‐defined PHPA‐core micelles in 10 mM sodium nitrate solution at 40 °C and 70 °C with mean hydrodynamic diameters of 20 nm and 35 nm, respectively. In contrast, most other PHPA‐based diblock copolymers investigated formed larger colloidal aggregates in 10 mM NaNO₃ solution at elevated temperatures. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2032–2043, 2010     

Tri-nuclear phthalocyanine complexes carrying N/O donor ligands as hydrogen peroxide catalysts,and their bleaching activity measurements by an online spectrophotometric method

A phthalocyanine (4) with four salicylhydrazone ligating groups that are directly linked through oxygen bridges to the macrocyclic core has been synthesized by condensation of tetrakis(4-formylphenoxy)phthalocyaninato zinc(II) (3) with salicylhydrazine. Salicylhydrazine was crystallized in methanol during the synthetic procedure. The crystal structure has triclinic space group P-1 with a = 5.8292(6) Å, b = 7.3039(7) Å, c = 17.9798(18) Å, α = 84.272(8)°, β = 89.184(8)°, γ = 81.469(8)°, and Z = 4. Intramolecular O–H?O and intermolecular O–H?O, N–H?N, N–H?O hydrogen bonds were determined in the crystal structure. In addition, there is a weak C–H?π interaction. Complexation on the periphery to yield tri-nuclear Zn(II)Pcs (5–7) was performed through the reaction of a Schiff base-substituted phthalocyanine (4) with MnCl₂·4H₂O, CoCl₂·6H₂O, or Ni(OAc)₂ salts. Fourier transform infrared, ¹H NMR, ¹³C NMR, UV–Vis, ICP-OES (inductively coupled plasma optical emission spectroscopy), mass spectroscopies, and elemental analyses were applied to characterize the prepared compounds. Bleach catalyst activity of the prepared phthalocyanine complexes (5–7) was examined by the degradation of morin and curcumin, respectively. The catalysts had better activity for color removing in solutions at ambient temperature than to that of tetraacetylethylenediamine (TAED).     

Thermal properties of 1,2,4-triazole-3-one and copper nitrate mixtures

1,2,4-Triazole-3-one (TO) is anticipated to have applications as a high performance alternative gas generating agent, while basic copper nitrate (BCN) is typically used as the oxidizing agent in air bag systems. In order to obtain a better understanding of the thermal properties of TO/BCN mixtures, thermal behavior was investigated using the differential scanning calorimetry. Mixtures of TO with copper, copper oxide, and trihydrated copper nitrate (Cu(NO₃)₂·3H₂O) were also examined for comparison purposes. Samples were prepared at TO/BCN ratios (on a per mass basis) of 10/0, 7/3, 5/5, 3/7, 2/8, 1.6/8.4, 1/9, and 0/10. The endothermic onset temperatures for TO/BCN mixtures were lower than those for either pure TO or pure BCN. TO/BCN mixtures exhibited an initial exothermic peak immediately after an endothermic peak, in the range of 219–234 °C. TO/BCN mixtures with ratios of 3/7, 2/8, 1.6/8.4, and 1/9 displayed a second series of exothermic peaks in the range of 260–300 °C, which appear to result from the oxidation–reduction reaction of previously formed intermediate species with NO₂ and NO generated by unreacted BCN. The TO/CuO mixtures are believed to undergo reaction between molten TO and CuO at approximately 230 °C. In general, the presence of copper was shown to be effective at promoting the decomposition of TO. The reaction between TO and Cu(NO₃)₂·3H₂O seems to be initiated by the melting of Cu(NO₃)₂·3H₂O, following which TO reacts with nitric acid resulting from the dissociation of Cu(NO₃)₂·3H₂O. Overall, the triggering event for the reaction between TO and each of the copper nitrate species is a phase change of one of the two mixture components.     

Temperature responsive copolymers of N‐vinylcaprolactam and di(ethylene glycol) methyl ether methacrylate and their interactions with drugs

Poly(N‐vinylcaprolactam) (PVCL) and poly(oligo(ethylene glycol) methyl ether methacrylate) (POEGMA) are well known for their thermoresponsive behavior in aqueous solutions. Indeed, they display lower critical solution temperatures (LCST) in the physiological range, which makes them interesting for biomedical devices and use in drug delivery systems. Homopolymers of N‐vinylcaprolactam and di(ethylene glycol) methyl ether methacrylate as well as copolymers thereof were synthesized by solution and direct miniemulsion polymerizations. The cloud points of the copolymers in aqueous solution were investigated as a function of temperature, comonomer ratio, and in the presence of model pharmaceutical ingredients. By variation of the comonomer ratio, it was possible to control the cloud point temperature between 26 and 35 °C, which was found to be beneficial to attenuate the effect of the drugs that also altered the cloud points. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3308–3313     

Thermoresponsive ketoprofen-imprinted monolith prepared in ionic liquid

A thermoresponsive imprinted monolith with the ability of molecular recognition for ketoprofen was prepared for the first time. The smart monolith was synthesized in a stainless steel column using acrylamide (AAm) and 2-acrylamide-2-methyl propanesulfonic acid (AMPS) as functional monomers, which can form interpolymer complexation to restrict access of the analyte to the imprinted networks at low temperatures. To avoid a high back pressure of the column derived from neat dimethyl sulfoxide (DMSO) as a porogenic solvent that is needed to solve polar AMPS, an ionic liquid, [BMIM]BF₄, was introduced into the pre-polymerization mixture. The molecular recognition ability towards ketoprofen of the resulting thermoresponsive molecularly imprinted polymer (MIP) monolith displayed significant dependence on temperature compared with a non-imprinted column (NIP), and the greatest imprinting factor was achieved at the transition temperature of 35 °C (above 10). Furthermore, the number of binding sites of the smart MIP monolith at 35 °C was about 76 times as large as that at 25 °C. In addition, Freundlich analyses indicated that the thermoresponsive MIP monolith had homogeneous affinity sites at both 25 and 35 °C with heterogeneity index 0.9251 and 0.9851, respectively.     

Tuning of Thermoresponsivity of a Poly(2‐alkyl‐2‐oxazoline) Block Copolymer by Interaction with Surface‐Active and Chaotropic Metallacarborane Anion

Thermoresponsive nanoparticles based on the interaction of metallacarboranes, bulky chaotropic and surface‐active anions, and poly(2‐alkyl‐2‐oxazoline) block copolymers were prepared. Recently, the great potential of metallacarboranes have been recognized in biomedicine and many delivery nanosystems have been proposed. However, none of them are thermoresponsive. Therefore, a thermoresponsive block copolymer, poly(2‐methyl‐2‐oxazoline)‐block‐poly(2‐n‐propyl‐2‐oxazoline) (PMeOx–PPrOx), was synthesized to encapsulate metallacarboranes. Light scattering, NMR spectroscopy, isothermal titration calorimetry, and cryogenic TEM were used to characterize all solutions of the formed nanoparticles. The cloud‐point temperature (T_CP) of the block copolymer was observed at 30 °C and polymeric micelles formed above this temperature. Cobalt bis(dicarbollide) anion (COSAN) interacts with both polymeric segments. Depending on the COSAN concentration, this affinity influenced the phase transition of the thermoresponsive PPrOx block. The T_CP shifted to lower values at a lower COSAN content. At higher COSAN concentrations, the hybrid nanoparticles are fragmented into relatively small pieces. This system is also thermoresponsive, whereby an increase in temperature leads to higher polymer mobility and COSAN release.     

Aspects of Degradation Kinetics of Azithromycin in Aqueous Solution

The chemical stability of azithromycin (AZM) in aqueous solution has been investigated utilizing a stability-indicating LC assay with ultraviolet detection. The degradation kinetics were studied as functions of pH (4–7.2), buffer composition (phosphate, acetate, and citrate), buffer concentration, ionic strength, drug concentration and temperature. The observed rate obtained by measuring the remaining intact AZM was shown to follow pseudo-first-order kinetics. The maximum stability of AZM occured at an approximate pH 6.3 in 0.05 M potassium phosphate. The observed degradation rate increased with ionic strength, buffer concentration and obeyed the Arrhenius equation over the temperature range investigated (70–100 °C). The apparent energy of activation (E _a) for AZM in solution was found to be 96.8 kJ mol^?1 and by application of the Arrhenius equation the stability at 25 °C (k ₂₅) and 40 °C (k ₄₀) had been predicted. Moreover, the degradation rate of AZM was independent on its initial concentration. Trace metal ions are unlikely to be involved in the degradation of AZM in aqueous solution. The major degradation product of AZM in aqueous solution was isolated and identified by LC–MS–MS and ¹H and ¹³C NMR spectra.     

Cobalt complexes based on 2-(1H-benzimidazol-2-yl)-phenol derivatives: preparation,spectral studies,DFT calculations and catalytic behavior toward ethylene oligomerization

In this study, five novel Co(II) complexes of 2-(1H-benzimidazol-2-yl)-phenol derivatives (HL_x: x = 1–5) have been synthesized and characterized. The general formula for complexes C1 and C2 is K₂[Co(HL_1,2)₂Cl₂]·H₂O, for complex C3 K₂[Co(HL₃)₂Cl₂], and for complexes C4 and C5 [Co(HL_4,5)₂]. In all complexes, the ligands are coordinated as bidentate, via one imine nitrogen and the phenolate oxygen atoms. The structures of the compounds were characterized by FT-IR, UV–vis, ¹H, ¹³C NMR spectroscopies, ICP and elemental analysis (C, H, and N). The purity of these compounds was ascertained by melting point (m.p.) and TLC. Geometry optimization of the studied complexes was done by Gaussian09 software at B3LYP/TZVP level of theory and satisfactory theoretical–experimental agreement was achieved for NMR and IR spectra of the compounds. Based on the combined experimental and theoretical studies, six-coordinate octahedral structures have been proposed for complexes C1–C3, while complexes C4 and C5 had distorted tetrahedral geometry. All complexes were activated with diethylaluminum chloride (Et₂AlCl), cobalt(II) complexes containing bulky methyl groups in the aryl moiety show high catalytic activities (1774 kg?mol^?1(Co)?h^?1) for ethylene oligomerization. The oligomers obtained from the cobalt complexes exhibit good selectivity for linear 1-butene and 1-hexene. Results revealed that both the steric and electronic effects of ligands strongly affect the catalytic activities and the properties of the catalytic products.     

Heterocyclization of ω-Bromo-2-trichloroacetyl Cycloalkanones to Isoxazole Derivatives

A new series of brominated 3,4-polymethylene-5-hydroxy-5-trichloromethyl-4,5-dihydroisoxazoles (2a–d) has been regiospecifically obtained from the reaction of ω-bromo-2-trichloroacetylcycloalkanones with hydroxylamine in 79–87% yield. Dehydration of the 5-hydroxydihydroisoxazoles 2a–d can be effected with concentrated sulfuric acid at 25 °C to give the regioisomeric brominated 3,4-polymethylene-5-trichloromethylisoxazoles (3a–d). In contrast, the dehydration of 5-hydroxydihydroisoxazoles with sulfuric acid in ethanol solution at 65 °C, for transformation of trichloromethyl to carboxyl group, was reproducible only with 9-bromo-3-trichloromethyl-3,3a,4,5,6,7,8,9-octahydrocycloocta[c]isoxazole-3-ol, 2d, leading to isoxazolecarboxylate 4d. The structural assignments of all isolated products are based on the analysis of their ¹H and ¹³C NMR spectral data.     

Novel and Efficient Synthesis of 4-Indazolyl-1,3,4-trisubstituted Pyrazole Derivatives

In the present study, 1-(4,5-dihydro-3,6-dimethyl-4-(1,3-diphenyl-1H-pyrazol-4-yl)-3aH-indazol-5-yl)methanone derivatives (9–12) and isoxazoleyl (13–16) have been synthesized by the condensation of 1,3-diphenyl-1H-pyrazole-4-carbaldehyde (1–4) with acetyl acetone via Knoevenagel/Michael/aldol reactions in a sequential manner to yield intermediate cyclohexanone (5–8). The intermediates (5–8) treated with NH₂NH₂ · H₂O/NH₂OH · HCl afforded 4-indazolyl-1,3,4-trisubstituted pyrazole and isoxazoleyl derivatives. All of these compounds are reported for the first time, and the structures of these compounds were confirmed by means of infrared, ¹H NMR, ¹³C NMR, and mass spectroscopy.     

Reactions of platinum complexes with 4,7-phenanthroline: crystal structures of mono- and binuclear platinum(II) complexes containing 4,7-phenanthroline

The reaction of a mixture of cis and trans-[PtCl₂(SMe₂)₂] with 4,7-phen (4,7-phen = 4,7-phenanthroline) in a molar ratio of 1 : 1 or 2 : 1 resulted in the formation of mono and binuclear complexes trans-[PtCl₂(SMe₂)(4,7-phen)] (1) and trans-[Pt₂Cl₄(SMe₂)₂(μ-4,7-phen)] (2), respectively. The products have been fully characterized by elemental analysis, ¹H, ¹³C{¹H}, HHCOSY, HSQC, HMBC, and DEPT-135 NMR spectroscopy. The crystal structure of 1 reveals that platinum has a slightly distorted square planar geometry. Both chlorides are trans with a deviation from linearity 177.66(3)°, while the N–Pt–S angle is 175.53(6)°. Similarly, the reaction of a mixture of cis and trans-[PtBr₂(SMe₂)₂] with 4,7-phen in a 1 : 1 or 2 : 1 mole ratio afforded the mono or binuclear complexes trans-[PtBr₂(SMe₂)(4,7-phen)] (3) and trans-[Pt₂Br₄(SMe₂)₂(μ-4,7-phen)] (4), respectively. The crystal structure of trans-[Pt₂Br₄(SMe₂)₂(μ-4,7-phen)].C₆H₆ reveals that 4,7-phen bridges between two platinum centers in a slightly distorted square planar arrangement of the platinum. In this structure, both bromides are trans, while the PtBr₂(SMe₂) moieties are syn to each other. NMR data of mono and binuclear complexes of platinum 1–4 show that the binuclear complexes exist in solution as a minor product, while the mononuclear complexes are major products.     

Luminescent N-isopropylacrylamide–surfmer copolymer hydrogels prepared upon electrostatic self-assembly of 1-pyrenesulfonate

The preparation of luminescent hydrogels based on the electrostatic self-assembly of 1-pyrenesulfonate (PyS) anions in a positively charged N-isopropylacrylamide (NiPAAm)/surfmer copolymer gel is described. The hydrogels were prepared from a micellar aqueous solution of 11-acryloyloxyundecyltrimethylammonium bromide and NiPAAm upon ⁶⁰Co-gamma irradiation. For assembly of PyS, the gel was shrunken at 50 °C and re-swollen at 20 °C in an aqueous solution of sodium 1-pyrenesulfonate. Re-swelling was accompanied by electrostatic assembly of PyS anions within the gel. Subsequently, the excess non-bound PyS ions were removed by repeatedly swelling and shrinking the gel in pure water at 20 °C and 50 °C, respectively. Incorporation of PyS ions in the hydrogel was studied using UV/Vis spectroscopy and energy dispersive x-ray (EDX) measurements. The amount of electrostatically adsorbed PyS was found to be proportional to the amount of copolymerized surfmer. EDX studies indicated that 20% of the bromide counterions were replaced for PyS. The PyS counterions could be released again if the functionalized hydrogel was immersed in acidified water. At a pH of 1, an almost complete release of PyS was found after 250 h. The preparation method can be used to introduce a variety of functional properties in thermoresponsive charged copolymer gels.     

Sucrosyl‐(1 → 2)‐β‐Isomaltulose: Enzymatic Synthesis and Structure Determination

Abstract

By enzymatic reaction of sucrose (1) and isomelezitose (2) with the enzyme inulinase (NOVO, SP230) a novel tetrasaccharide (3) was synthesised,.the molecular weight of which was confirmed by electrospray‐ionisation mass spectrometry and gel permeation chromatography. Its structure was established by acid hydrolysis as well as ¹H and ¹³C NMR spectroscopy to be sucrosyl‐(1 → 2)‐β‐isomaltulose 3 (α‐D‐glucopyranosyl‐(1 → 2)‐β‐D‐fructofuranosyl‐(1 → 2)‐β‐D‐fructofuranosyl‐(6 → 1)‐α‐D‐glucopyranoside).     

Synthesis,structural, and spectral studies of diorganotin(IV) complexes with 2–hydroxy-5-methylbenzaldehyde-N(4)-cyclohexylthiosemicarbazone

Three new diorganotin(IV) complexes, [Me₂Sn(L)] (2), [Bu₂Sn(L)] (3), and [Ph₂Sn(L)] (4) [where H₂L (1) = 2-hydroxy-5-methylbenzaldehyde-N(4)-cyclohexylthiosemicarbazone] have been synthesized by reacting the corresponding diorganotin(IV) dichloride with H₂L (1) in absolute methanol in the presence of potassium hydroxide. All the compounds have been characterized by CHN analyses, UV–vis, FT-IR, ¹H, ¹³C, and ¹¹⁹Sn NMR spectroscopy. The molecular structures of H₂L (1) and 2 have been confirmed by single crystal X-ray diffraction analysis. H₂L (1) is found to be in the thiol tautomeric form. The X-ray structure of 2 showed that H₂L is a tridentate ligand and binds to the tin(IV) atom via the phenolic oxygen, azomethine nitrogen, and thiolate sulfur. Complex 2 has a triclinic structure and the coordination geometry of tin(IV) is distorted trigonal bipyramidal. The sulfur and oxygen are in axial positions while the azomethine nitrogen of 1 and two methyl groups occupy the equatorial positions. The C-Sn-C angles determined from ¹J(¹¹⁹Sn, ¹³C) for 2, 3, and 4 are 124.35°, 123.11°, and 123.82°, respectively. The values of δ(¹¹⁹Sn) for 2, 3, and 4 are ?153.4, ?180.59, and ?158.3 ppm, respectively, indicating five-coordinate tin(IV). From NMR data a distorted trigonal-bipyramidal configuration at each tin is proposed.     

Homobimetallic zinc(II) dithiocarbamates: synthesis,characterization and in vivo antihyperglycemic activity

This article presents structural characteristic and in vivo antihyperglycemic activities of three new homobimetallic Zn(II) dithiocarbamates (1–3) with general formula [ZnL₂]₂, where L is 4-(3-methoxyphenyl)piperazine-1-carbodithioate (1), 4-(4-methoxyphenyl)piperazine-1-carbodithioate (2) and 4-benzhydrylpiperazine-1-carbodithiaoate (3). These complexes have been characterized by elemental analysis, FT-IR, multinuclear NMR (¹H and ¹³C), and X-ray single crystal analysis. The latter technique has confirmed the homobimetallic nature of 1 and 2 in which Zn ions are linked via sulfurs to form a four-membered ring Zn₂S₂. Non-covalent intermolecular interactions give a supramolecular ladder-like zigzag chain (1) and layered structure (2). The antihyperglycemic activities revealed that the blood glucose lowering ability follows the trend: glibenclamide (83.0 mg dL^?1) > 3 (97.6 mg dL^?1) > 2 (100.4 mg dL^?1) > 1 (141.4 mg dL^?1).