Main-chain biodegradable liquid crystal based on cholesteryl end-capped polycarbonate copolymers

Main-chain biodegradable liquid crystal (LC) based on cholesteryl end-capped polycarbonate copolymers was investigated. The novel LC was synthesised through ring-opening copolymerisation of trimethylene carbonate with ε-caprolactone (CL) initiated by cholesterol, without adding any catalyst. The chemical structure of the resulting polymers was confirmed by ¹H NMR. The liquid crystalline properties were validated by X-ray diffraction, differential scanning calorimetry and polarising optical microscopy. The results showed that the synthesised polycarbonate copolymers Chol-(TMCL)x + y exhibited liquid crystallinity in particular temperature ranges because of the incorporation of the cholesterol moieties. Furthermore, the effect of CL content on the mesomorphism properties of Chol-(TMCL)_x+y was also investigated; the higher the CL content, the lower the mesomorphism properties. It might be attributed to the hindered orientation of LC caused by the crystallinity of the poly(ε-caprolactone) (PCL) segments in the polymer chain.     

Synthesis and characterization of fluorine-containing cholesteric liquid crystalline polysiloxanes bearing trifluoromethyl-substituted mesogens

A series of side-chain liquid crystal (LC) polysiloxanes were synthesised with Poly(methylhydrogeno)siloxane, 4?-(undec-10-enoyloxy) biphenyl – 4 – yl 4- (trifluoromethyl) benzoate (M_th) and a chiral nematic (N*) LC monomer 1-allyl 10-(cholesteryl)-decanedioate (M_ch). The chemical structures and LC properties of the monomers and polymers were characterised by FTIR, ¹H-NMR, differential scanning calorimetry, thermogravimetric analysis, POM and X-ray diffractometer. M_ch is monotropic N* LC. The homopolymer derived from monomer M_ch is enantiotropic N* LC. Monomer M_th is a smectic A liquid crystal. The copolymers derived from M_ch and M_th are N* LCs. The temperatures at which 5% weight loss occurred are greater than 300°C for all the fluoro-containing polymers, and the residue weights of the samples at 600°C increased slightly as the content of trifluoromethyl mesogens increased in the polymers. The glass transition temperatures of the polymers increased as trifluoromethyl mesogens increased, too. The N*–I phase transition temperatures show a negative deviate from ideal or linear behaviour. The values of the enthalpy changes for the cholesteryl containing polymers are rather low and this is attributed to the biaxiality of cholesteryl moiety which tends to reduce the change in the orientational order at the N*–I transition. Compared to the monomers, the polymers show wider mesophase region.     

Synthesis and characterization of chiral azo LCPs with optical properties

ABSTRACT

In this study, we designed, synthesised and characterised two series of cholesteric liquid crystal polymers, QP series and ZP series. With polymethylhydrosiloxane as the main chain, QP series were synthesised by copolymerisation between the monomer M₁ containing a cholesteryl mesogenic unit and the monomer M₂ with a hydroxyl. ZP series, meanwhile, were synthesised by esterification between QP series members and the monomer M₃, a carboxylic acid with an azo mesogenic unit. We characterised chemical structures of all the monomers and polymers by FT-IR and ¹H-NMR, which proved that the target monomers and polymers had been obtained. We observed dramatic colour changes after the introduction of monomer M₃ and Grandjean textures from both QP series and ZP series using POM. In addition, strong selective reflection could be observed as well. Then, we characterised the thermal properties of polymers by DSC, TGA and XRD to explore their phase transition behaviours further. Their photoresponsive and photochromic properties were characterised by UV-Vis spectrum.     

Terpolymerization of propylene oxide,carbon dioxide,and trimethylene carbonate

High-molecular-weight polymers with different contents of propylene carbonate (PC), and trimethylene carbonate (TMC) units in the polymer chain were synthesized by the coordination anionic copolymerization of carbon dioxide, propylene oxide (PO), and TMC in supercritical carbon dioxide (scCO₂). Zinc adipate (ZnAd) was used as a catalyst. The terpolymerization products were characterized by ¹H and ¹³C NMR, IR spectroscopy, GPC, and DSC. The effect of the reaction conditions on the yield, composition, structure, and molecular weight and thermal characteristics of the terpolymers was studied. The phase behavior of the synthesized polymers and mixtures of polypropylene carbonate with polytrimethylene carbonate was examined.

     

Phase and optical behaviours of chiral-azo liquid crystal polymethylsiloxanes with isosorbide units

ABSTRACT

In this study, we synthesised two series of cholesteric liquid crystal polymers CPQ and CPZ series. First, we prepared four different monomers ML₁ containing a cholesteryl group, ML₂ containing a cyano group, ML₃ containing a phenolic hydroxyl group and ML₄ containing isosorbide with azo groups. With the polymethylsiloxanes as the main chain, CPQ series were then synthesised by copolymerisation among the monomers ML₁, ML₂ and ML₃ and CPZ series were synthesised by esterification between the CPQ series and the monomer ML₄. ¹HNMR and FT-IR spectra confirmed the chemical structures of all the monomers and polymers. The mesomorphic behaviours and thermal properties were investigated by TGA, DSC, POM and XRD. Both the CPQ and CPZ series exhibited excellent thermal stability and reversible phase transitions, as well as interesting Grandjean textures under POM. CPZ series showed higher optical activity than CPQ series due to the introduction of the isosorbide group and the azo group, which could tune the pitch to make Bragg selective reflection appear more easily. UV–Vis spectra investigated the photoresponse behaviours of CPZ series thoroughly.     

Synthesis and properties of side-chain liquid crystalline polymers grafted with chiral dimers containing cholesteryl groups

ABSTRACT

Two series of novel side-chain liquid crystal (LC) polysiloxanes grafted with chiral liquid crystalline dimers containing cholesteryl mesogens were synthesised. The chemical structure and LC properties of comonomers and polymers were characterised by FTIR, ¹H-NMR, DSC, TGA, POM and XRD. M₁ and M₂ were chiral nematic (N*) dimers, and M₃ was an achiral LC monomer displaying nematic mesophase in a narrow mesomorphic temperature range, while the copolymers exhibited N* mesophase whose mesomorphic temperature ranges were much wider than those of the comonomers. Moreover, the glass transition temperatures and isotropization temperatures of the polymers all decreased with decreasing the dimer components. Reflection spectra showed that P_a series tend to attain wide-band selective reflection at long wavelengths, while P_b series were more potential at short wavelengths with narrow bandwidths. Decreasing the dimer components led the wavelength of the selective reflection to blue shift, which was an abnormal phenomenon in chiral mixture system.     

Synthesis and liquid crystal properties of new cyclic carbonate monomers functionalised with cholesteryl moiety

ABSTRACT

Four new liquid crystal cyclic carbonate monomers M₁–M₄, with cholesteryl moiety and flexible spacer of different lengths, were synthesised through coupling reaction. The chemical structures, mesophase properties and thermal behaviour of the monomers were characterised with Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy (¹H NMR), polarising optical microscopy, differential scanning calorimetry and X-ray diffraction. Based on these results, the relationship between the number of methylene groups into flexible chain and the mesomorphism of the monomers was investigated. It was found that all the monomers showed a focal conic texture of a smectic A phase and exhibited an interdigitated molecular arrangement. Moreover, the glass transition temperature and the isotropisation temperature of the monomers except M₁ decreased, and the mesophase range narrowed as the number of methylene units into the flexible chain increased.     

Synthesis and mesomorphism of the liquid crystal based on diosgenyl end-capped polycarbonate

ABSTRACT

To enhance the activity of the hydroxyl group of diosgenin, the diosgenyl derivative Dios–(CH₂)₆–OH with an alkyl spacer and end primary hydroxyl group was synthesised via the chain extension reaction between diosgenin and 1,6-hexanediol. Then the liquid crystal (LC) compounds Dios–(CH₂)₆–(trimethylene carbonate [TMC])_n with different TMC content were obtained via the ring-opening polymerisation of TMC with Dios–(CH₂)₆–OH as initiator and mesogenic unit, importantly, there was no catalyst added. The chemical structures of the Dios–(CH₂)₆–OH and Dios–(CH₂)₆–(TMC)_n were characterised by Fourier transform infrared (FT-IR) spectra and ¹H NMR. The mesomorphism was characterised by polarising optical microscopy and X-ray diffraction measurement, and the phase transition was investigated by differential scanning calorimetry. The results showed that Dios–(CH₂)₆–(TMC)_n displayed an enantiotropic smectic phase, and TMC content played an important role in the LC properties of Dios–(CH₂)₆–(TMC)_n. The higher the TMC content, the lower the phase transition temperature of Dios–(CH₂)₆–(TMC)_n.     

Effect of terminal perfluorocarbon chain containing mesogens on phase behaviors of chiral comb-like liquid crystalline polymers

A novel perfluorinated liquid crystal 4′-(2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluorooctanoyloxy)biphenyl-4-yl undec-10-enoate (PFOBU) was synthesized, which exhibited smectic C phase. Several liquid crystalline polymers (PI–PVI) were synthesized by use of poly(methylhydrogeno)siloxane, PFOBU, and cholesteryl 3-(4-allyloxy-phenyl)-acryloate. The chemical structures and liquid crystalline (LC) properties of the monomers and polymers, and some ferroelectric properties of the chiral smectic C (S_C^*) phase were characterized by use of various experimental techniques. The effect of perfluorocarbon chains on phase behaviors of the fluorinated LC polysiloxanes was studied as well. PI and PII showed single chiral nematic (N^*) mesophase when they were heated and cooled, but PIII, PIV, PV, and PVI containing more perfluorocarbon chain units exhibited S_C^* phase besides N^* mesophase. Introduction of perfluorocarbon chain containing mesogens to the chiral cholesteryl-containing polymer systems resulted in a S_C^* mesophases, indicating that the fluorophobic effect could lead to microphase segregation and modifications of smectic mesophases from the chiral nematic phase.     

Preparation and Application of Cholesteryl‐Benzo‐15‐Crown‐5/Cholesteryl Mixed Liquid Crystals

Various mixed liquid crystals containing crown ether‐cholesteryl liquid crystal, benzo‐15‐crown‐5‐COO‐C₂₇H₄₅ (B15C5‐COOCh), with various common cholesteric liquid crystals, e.g., cholesteryl chloride, cholesteryl benzoate and cholesteryl palmitate, were prepared and studied using polarizing microscopy and differential scanning calorimetry. Investigating the concentration effect of B15C5‐COOCh in mixed liquid crystals revealed that the addition of B15C5‐COOCh resulted in wider phase transition temperature ranges of these cholesteryl liquid crystals. The stability of these B15C5‐COOCh/cholesteryl mixed liquid crystals was studied using comprehensive graphic molecular modeling computer programs (Insight II and Discover) to calculate their molecular energy and stability energy. The effect of salts, e.g. Na⁺, Co³⁺, Y³⁺ and La³⁺, on the transition temperature range of the mixed liquid crystals was also investigated. The crown ether cholesteric liquid crystal B15C5‐COOCh was applied both as a surfactant and an ion transport carrier to transport metal ions through liquid membranes. Cholesteryl benzo‐15‐crown‐5 exhibited distinctive characteristics of a surfactant and the critical micellar concentration (CMC) of the surfactant was investigated by the pyrene fluorescence probe method. Cholesteryl benzo‐15‐crown‐5 was successfully applied as a good ion transport carrier (Ionophore) to transport various metal ions, e.g. Li⁺, Na⁺, La³⁺, Fe³⁺ and Co³⁺, through organic liquid membranes. The transport ability of the cholesteryl benzo‐15‐crown‐5 surfactant for these metal ions was in the order: Co³⁺ ≥ Li⁺ > Fe³⁺ > Na⁺ > La³⁺.     

Synthesis and characterisation of star-shaped liquid crystalline polymer with a POSS core

The star-shaped POSS-graft-LCP with POSS as the core and liquid crystal polymer, poly{6-(4?-octyloxyphenyl-4″-benzoyl)hexyl acrylate}, as arms was prepared by atom transfer radical polymerisation technique using octa(3-chloropropyl) polyhedral oligomeric silsesquioxane [POSS-(CH₂CH₂CH₂Cl)₈] as initiator. For comparison, the linear liquid crystal polymer, poly{6-(4?-octyloxyphenyl-4″-benzoyl)hexyl acrylate} (LLCP), was obtained by conventional radical polymerisation. Both liquid crystal polymers were characterised by FT-IR, ¹H NMR, ¹³C NMR, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, polarised optical microscopy and X-ray diffraction analysis. The liquid crystal phase behaviour research demonstrated that both liquid crystal polymers were reversible thermotropic nematic liquid crystal materials. The number of polymerisation degree of every arm attached on POSS in POSS-graft-LCP impacted greatly on the liquid crystal properties and only a small one was necessary for it to exhibit a broad liquid crystal range. Results further demonstrated that the special star-shaped topology of POSS and the eight arms attached helped POSS-graft-LCP form and stabilise liquid crystal phase easily. This research may further expand the way to star-shaped LCPs by employing a variety of (meth)acrylate and other vinyl liquid crystalline monomers.     

Use of samarium (III) acetate as initiator in ring-opening polymerization of trimethylene carbonate

Abstract

In this work was evaluated the activity of samarium acetate (III) (Sm(OAc)₃) as a possible initiator in the polymerization by ring opening of trimethylene carbonate (TMC). All polymerizations were carried out under solvent-free melt conditions in ampoules-like flasks, equipped with a magnetic stirrer. The effects of different parameters of reaction, such as molar ratio monomer to initiator, temperature and reaction time, on typical variables of polymers, e.g., conversion of TMC to poly(trimethylene carbonate) (PTMC), dispersity and molar mass, were analyzed. The molar ratio of monomer to initiator was varied between 0 and 1000?mol/mol and the temperature among 70 and 150?°C. Nuclear Magnetic Resonance (¹H-NMR and HMBC) and Size Exclusion Chromatography (SEC) were used to characterize the polymers. The results indicate that the Sm(OAc)₃ induces the polymerization of TMC to high conversion with number-average molecular weights of 3.11?×?10³ to 38.40?×?10³?Da. Based on the ¹H-NMR end-group analysis of low-molecular-weight PTMC, it was proposed a coordination–insertion mechanism for the polymerization, with a breakdown of the acyl-oxygen bond of the TMC. In according to the kinetic study carried out, the polymerization rate is first-order with respect to monomer concentration with apparent rate constants of k_ap?=?7.02?×?10^?4?mol?×?L^?1?×?h^?1.     

Synthesis and enzymatic degradation of end-functionalized biodegradable polyesters

End-functionalization of biodegradable polymers/oligomers based on L-lactide and glycolide by cholesteryl moiety was investigated. We established the feasibility of preparing the functionalized polymers/oligomers, Chol-(LG)_m+n, through ring-opening copolymerization initiated by cholesterol bearing a hydroxyl group, without adding any catalyst. The functionalized polymers/oligomers of different molecular weights were obtained by controlling the feed ratio of the initiator cholesterol to the monomers. The chemical structure of end-functionalized polymers/oligomers was confirmed by FTIR and ¹H NMR. Incorporation of cholesteryl moiety into the polymer chains induces liquid crystallinity in the resultant oligomers when the molecular chains are not very long. The enzymatic degradation studies, for all the samples, were carried out using enzyme, proteinase K. Interestingly, the enzymatic degradation of cholesteryl end-functionalized polymers/oligomers resulted in a lamella-like porous structure on the sample surface, which is altogether different from the commonly reported spherical-pore structure formed during the degradation of conventional polyesters.     

Synthesis and mesomorphic properties and optical behaviour analysis of homologous series azobenzene liquid crystal monomer with polar substituents

ABSTRACT

Twenty novel azobenzene liquid crystal micromolecular compounds named ω-[4-(p-substituted azobenzeneoxy carbonyl]acid (X-ABCnA) have been designed and synthesised, followed by studies on the thermal performance and mesomorphic properties of the compounds. The liquid crystal compounds were divided into five homologous series based on the terminal substituents R (R = CH₃O, CH₃, H, Cl, NO₂). In each series, the number of carbons on flexible chain was 4, 6, 8 and 10, respectively. Fourier-transform infrared, proton nuclear magnetic resonance and elementary analysis demonstrated that the structure of the synthesised azobenzene liquid crystal compounds was consistent with the molecular design. The mesomorphic properties were tested, analysed and characterised by using differential scanning calorimetry and polarised optical microscopy. The melting transition (T _m) of all the compounds in homologous series with different substituents appeared to decrease with the increase of carbon numbers on flexible chains. The same held true for the temperature of isotropic-mesophase/crystalline transition. The compounds with stronger polarity of terminal substituents were more likely to form broader mesogenic ranges. The liquid crystal compounds discussed in this work can be regarded as a reference for the synthesis of mesogenic arms participating in the synthesis of novel multi-arm liquid crystalline macromolecules and polymers.     

Preparation and Application of Cholesteryl‐Macrocyclic Polyether Liquid Crystals and Surfactants

Macrocyclic polyethers containing a cholesteryl moiety, e.g., cholesteryl benzo‐15‐crown‐5 (C₂₇H₄₅OOC‐B15C5) and cholesteryl cryptand22 (C₂₇H₄₅OOC‐Cryptand22), were synthesized. The cholesteryl crown ether C₂₇H₄₅OOC‐B15C5 showed liquid crystal characteristics which were observed by polarizing microscopy. In contrast, the cholesteryl cryptand C₂₇H₄₅OOC‐Cryptand22 showed no liquid crystal characteristics. The doping effect of inorganic salts on the liquid crystal formation of cholesteryl benzo‐15‐crown‐5 was also investigated, revealing that the addition of salts resulted in narrower liquid crystal temperature ranges. Both cholesteryl cryptand C₂₇H₄₅OOC‐Cryptand22 and cholesteryl crown ether C₂₇H₄₅OOC‐B15C5 also exhibited the distinctive characteristics of surfactants in solutions. Fluorescence probe of pyrene and surface tension measurement were applied as sensitive tools to study the formation of the micelles and determine the critical micellar concentration (CMC) of the cholesteryl cryptand and crown ether surfactants. The salt effect on the CMC of the cholesteryl cryptand surfactant was also investigated and is discussed. Furthermore, the cholesteryl benzo‐15‐crown‐5 was successfully employed as a quite good phase transfer catalyst for the oxidation of alcohols, e.g., benzhydrol, with NaMnO₄ as an oxidant. Effects of temperature, solvent and concentration of the crown ether catalyst on the oxidation of benzhydrol were also investigated.     

Oxidation‐Responsive Aliphatic Polycarbonates from N‐Substituted Eight‐Membered Cyclic Carbonate: Synthesis and Degradation Study

Oxidation‐responsive aliphatic polycarbonates represent a promising branch of functional biodegradable polymers. This paper reports the synthesis and ring‐opening polymerization (ROP) of an eight‐membered cyclic carbonate possessing phenylboronic pinacol ester ( C3 ) and the H₂O₂‐triggered degradation of its polymer ( PC3 ). C3 is prepared from the inexpensive and readily available diethanolamine with a moderate yield and undergoes the well‐controlled anionic ROP with a living character under catalysis of 1,8‐diazabicyclo[5.4.0]undec‐7‐ene. It can also be copolymerized with l ‐lactide, trimethylene carbonate, and 5‐ter‐butyloxycarbonylamino trimethylene carbonate, affording the copolymers with a varied distribution of the repeating units. To clearly demonstrate the oxidative degradation mechanism of PC3 , this paper first investigates the H₂O₂‐induced decomposition of small‐molecule model compounds by proton nuclear magnetic resonance (¹H NMR). It is found that the adduct products formed by the in‐situ‐generated secondary amines and p‐quinone methide (QM) are thermodynamically unstable and can decompose slowly back to QM and the amines. On this basis, this paper further studies the H₂O₂‐accelerated degradation of PC3 nanoparticles that are prepared by the o/w emulsion method. A sequential process of oxidation of the phenylboronic ester, 1,6‐elimination of the in‐situ‐generated phenol, releasing CO₂ and intramolecular cyclization or isomerization is proposed as the degradation mechanism of PC3 .     

Copolymerization of carbon dioxide and oxetane catalyzed by aluminum porphyrin complex system

Tetraphenylporphinatoaluminum chloride ([TPP]AlCl) catalyst and tetra-n-butylammonium bromide (TBAB) cocatalyst system is effective for the copolymerization of CO₂ and oxetane even under low CO₂ pressure (~2 MPa). In the presence of toluene as a solvent, poly(trimethylene carbonate) (PTMC) containing >99% of carbonate linkages with M_n = 8600 and M_w/M_n = 1.70 was synthesized. This is the first report of PTMC formation with excellent ratio of carbonate linkages from oxetane and CO₂. According to the kinetic analysis, proton nuclear magnetic resonance (¹H NMR) and matrix assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF/MS) measurements of the products, PTMC was mainly synthesized via (i) the trimethylene carbonate (TMC) formation from CO₂ and oxetane and (ii) the successive ring-opening polymerization of TMC.     

Synthesis and characterization of novel aliphatic polycarbonates

A new six‐membered cyclic carbonate monomer, 5‐benzyloxy‐trimethylene carbonate, was synthesized from 2‐benzyloxy‐1,3‐propanediol, and the corresponding polycarbonate, poly(5‐benzyloxy‐trimethylene carbonate) (PBTMC), was further synthesized by ring‐opening polymerization in bulk at 150 °C using aluminum isobutoxide [Al(OⁱBu)₃], aluminum isopropoxide, or stannous octanoate as an initiator. The results showed that a higher molecular weight polycarbonate could be obtained in the case of Al(OⁱBu)_3. The protecting benzyl group was removed subsequently by catalytic hydrogenation to give a polycarbonate containing a pendant hydroxyl group (PHTMC). The polycarbonates obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR,¹³C NMR, gel permeation chromatography, and DSC. NMR results of PBTMC offered no evidence for decarboxylation occurring during the propagation. The pendant hydroxyl group in PHTMC resulted in an enhancement of the hydrophilicity of the polycarbonate. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 70–75, 2002     

Studies on the mesophase formation mechanism of polybenzoxazines: polymerisation induction

ABSTRACT

To study the mesophase formation mechanism of polybenzoxazine, a novel linear benzoxazine oligomer bearing cholesteryl side groups [poly(PC-AC)] was designed and synthesised through thermally activated ring-opening polymerisation of a monofunctional benzoxazine monomer (PC-AC). The PC-AC was obtained by Mannich condensation reaction using mesomorphic amine of cholesteryl 4-aminobenzoate, p-cresol and paraformaldehyde as starting materials. During the isothermal polymerisation of PC-AC monomer, the phase evolution from a crystal phase to an isotropic molten phase and then to a liquid crystal (LC) phase was observed. Since it is PC-AC oligomers that form the LC phase, ‘polymerisation-induced LC’ mechanism is put forward. We believe that the structure factors including the confined formation of intramolecular hydrogen bonding and the side chain position of mesogenic units also play an important role in the formation of the LC phase. Furthermore, poly(PC-AC) exhibits a smectic mesophase. This work provides new insight into the LC phase formation mechanism of polybenzoxazines. This is very helpful to guide the rational design and synthesis of polymers with high thermal conductivity and high-temperature resistance.     

Fabrication of biodegradable poly(trimethylene carbonate) networks for potential tissue engineering scaffold applications

Biodegradable poly(trimethylene carbonate) (PTMC) networks were prepared by photopolymerization of linear (L)‐ and star (S)‐shaped PTMC macromonomers for potential tissue engineering scaffold applications. The L‐ (M_n, 6400) and S‐shaped (M_n, 5880) PTMC macromonomers were synthesized using 1,4‐butane diol and 2‐ethyl‐ 2‐hydroxyl‐propane‐1,3‐diol co‐initiated ring‐opening polymerization of trimethylene carbonate (TMC) in the presence of stannous octoate and subsequent acrylation with acryloyl chloride. Chemical structures of the PTMC macromonomers and their corresponding networks were characterized by ¹H NMR and ¹³C NMR spectroscopy. The human endothelial cell line, EA.hy926 was used to test the biocompatibility, cell adhesion, and proliferation behavior of both PTMC networks. The PTMC networks made from the S‐shaped macromonomers exhibited superior cell adhesion and proliferation behavior than those made of the linear macromonomers. Copyright © 2008 John Wiley & Sons, Ltd.