Controllable length adjustment of polyaniline particle with temperature sensitive block copolymer as template

Although the diameter of conductive polymer nanoparticles can be controlled effectively, the uniformity of particle length is still very challenging. In this study, with the temperature‐sensitive block copolymer PS₁₁₁‐b‐PNIPAM₁₁₄ as the template, the morphology and size of polyaniline (PANI) particles had been controllably adjusted through the change of temperature. Additionally, the electrochemical performance of each sample was investigated. After PS₁₁₁‐b‐PNIPAM₁₁₄ was synthesized through the reversible addition‐fragmentation chain transfer radical polymerization (RAFT), with its vesicular micelle as the “template”, the PANI particles with uniform length distribution were prepared successfully at 40°C. The average length of PANI particles after template removal was 254.07 nm with a short tail distribution, which was closer to the average than the standard normal distribution. Electrochemical results of PANI showed that it had good electrochemical activity with fast charge and discharge ability. And, with the current density of 1 A·g^?1, its discharge‐specific capacitance could reach up to 805.61 F·g^?1.     

Hydrothermal Self-assembly Synthesis of Mn3O4Reduced Graphene Oxide Hydrogel and Its High Electrochemical Performance for Supercapacitors

In the present work Mn3O4/reduced graphene oxide hydrogel （Mn3O4-rGOH） with three dimensional （3D） networks was fabricated by a hydrothermal self-assembly route. The morphology, composition, and microstructure of the as-obtained samples were characterized using powder X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS）, thermogravimetry analysis （TG）, atomic absorption spectrometry （AAS）, field emission scanning electron microscopy （FESEM） and transmission electron microscope （TEM）. Moreover, the electrochemical behaviors were evaluated by cyclic voltammogram （CV）, galvanostatic charge-discharge and electrochemical impedance spectroscopy （EIS）. The test results indicated that the hydrogel with 6.9% Mn3O4 achieved specific capacitance of 148 F.g^-1 at a specific current of 1 A.g^-1, and showed excellent cycling stabilily with no decay after 1200 cycles. In addition, its specific capacitance could retain 70% even at 20 A.g^- 1 in comparison with that at 1 A.g ^-1 and the operating window was up to 1.8 V in a neutral electrolyte.     

石墨烯-氧化钌纳米复合材料的水热法合成及电化学电容性能

通过水热法制备了石墨烯-氧化钌(G-RuO₂)纳米复合材料。对样品进行了X射线衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM)和能量色散谱(EDS)表征。SEM结果表明氧化钌粒子均匀地分散在石墨烯层片上。TEM结果显示氧化钌纳米粒子的平均粒径约为3 nm。对样品进行了循环伏安和充放电性能测试,结果表明在1 A·g^-1的电流密度下,样品在H₂SO₄(1 mol·L^-1)溶液中具有219.7 F·g^-1的比电容。     

The loading of polyoxometalates compound on a biomass derived N-doped mesoporous carbon matrix,a composite material for electrical energy storage

Abstract

A polyoxometalate (POM)-based composite material (NiPW₁₂NP/NMC) was synthesized, in which the nanoparticle of a POM compound (NiPW₁₂NP) distributes on orange juice derived nitrogen doped mesoporous carbon matrix (NMC) homogenously. When employed as a cathode material, NiPW₁₂NP/NMC exhibits high specific capacitance, remarkable rate capability and long-term stability. When the current density is 4?A·g^?1, a specific capacitance as high as 547 F·g^?1 is achieved by NiPW₁₂NP/NMC. With NiPW₁₂NP/NMC serving as cathode and MnO₂ acting as anode, a high performance asymmetric supercapacitor is assembled, which possesses a high energy density of 10.88?Wh·kg^?1 at 0.64?kW·kg^?1. It also shows a good rate capability, when the current density increases from 4 to 12?A·g^?1, its specific capacitance decreases from 113 to 88 F·g^?1, with 77.9% capacitance retention. After 5000 cycles charge-discharge experiments, 92.8% of its capacitance can be maintained, which exhibits good stability.     

Non‐Covalent Functionalization of Graphene with Bisphenol A for High‐Performance Supercapacitors

The reduced graphene oxide (RGO)/bisphenol A (BPA) composites were prepared by an adsorption‐reduction method. The composites are characterized by X‐ray diffraction (XRD), UV‐vis, thermogravimetric (TG) analysis, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM). The results confirm that BPA is adsorbed on the basal plane of RGO by π‐π stacking interaction. Furthermore, the electrochemical behaviors were evaluated by cyclic voltammetry, galvanostatic charge/discharge techniques and electrochemical impedance spectroscopy (EIS). The results show that the RGO/BPA nanocomposites exhibit ultrahigh specific capacitance of 466 F·g^?1 at a current density of 1 A·g^?1, excellent rate capability (more than 81% retention at 10 A·g^?1 relative to 1 A·g^?1) and superior cycling stability (90% capacitance decay after 4000 cycles). Consequently, the RGO/BPA nanocomposites can be regarded as promising electrode materials for supercapacitor applications.     

纳米钙钛矿型LaFe1-xNixO3(x=0~1.0)的制备及其在紫外光激发下的电化学性能

本文采用溶胶-凝胶法制备了LaFe1-xNixO3(x=0,0.2,0.4,0.6,0.8,1.0)纳米晶粉末,利用XRD、TEM和电化学测试方法对LaFe1-xNixO3材料的相结构、形貌、成分组成和其在碱液中的充放电性能以及电化学动力学性能等方面进行了表征和分析,同时对电极受紫外光激发前后的电化学行为进行了对比研究。XRD和TEM分析表明,用硝酸盐作为原材料和溶胶-凝胶方法可制备出单一相结构的纳米晶钙钛矿型LaFe1-xNixO3复合氧化物,随Ni替代量x的增大,LaFe1-xNixO3的相结构由正交结构向菱面体结构转变,其分子体积和晶粒尺寸呈现减小的趋势。电化学研究结果表明,紫外光激发前,LaFe1-xNixO3电极的放电容量随x的增加而逐渐增大;光激发后,电极的放电容量和交换电流Io与未激发前相比显著提高,当x=0.4时其放电容量具有最大值483.1mAh·g-1,Io值由光激发前的3.54～11.58 mA·g-1大幅增加至激发后的8.37～40.11 mA·g-1。     

石墨烯/钴镍双金属氢氧化物复合材料的制备及电化学性能研究

采用微波辐射与高温裂解相结合的二步还原法制备石墨烯。二步还原使氧化石墨被充分还原和剥离,所得到的石墨烯有较好的传导性,其比表面达675.4 m2.g-1。以此石墨烯为原料,水热法合成出石墨烯/钴镍双金属氢氧化物复合材料,并考察了复合材料作为超级电容电极材料的电化学性能。研究发现,褶皱的石墨烯纳米片均匀分散在钴镍双金属氢氧化物中,这改善了钴镍双金属氢氧化物的传导性和结构稳定性。在0.25 A.g-1电流密度下,复合材料的比电容量是800.2 F.g-1。当电流密度增加至10 A.g-1,比电容量为386.5 F.g-1,恒电流充-放电500次后比电容量仍能保持99%以上,这些呈示该复合材料具有优良的电化学性能。     

纳米多孔双金属氧化物NiCo2O4的制备及其电化学性能

采用快速凝固与脱合金化相结合的方法制备纳米多孔Ni、Ni-Co合金,分别经腐蚀与退火获得纳米多孔NiO、NiCo_2O_4,采用XRD、SEM、TEM、N_2吸附-脱附等对多孔NiO、NiCo_2O_4电极的物相、形貌结构、孔径分布进行表征,并通过循环伏安、恒电流充放电等方法测试多孔电极的电化学性能。结果表明,得到的纳米多孔NiO具有均匀的"泥裂"式结构,在1A·g~(-1)电流密度下比电容为375 F·g~(-1),当电流密度增加至20 A·g~(-1)时的比容保持率为67.5%,在4 A·g~(-1)电流密度下循环充放电1 000次,比容保持率为81.7%;NiCo_2O_4形成典型的开放式纳米多孔双连续结构,其在1A·g~(-1)电流密度下比电容为674 F·g~(-1),当电流密度增加至20 A·g~(-1),比容保持率达72.0%;在4 A·g~(-1)电流密度下循环充放电1 000次,比容保持率达92.9%,双连续纳米多孔结构及其提供的机械稳定性,使得NiCo_2O_4表现出更为优异的超电容性能。     

石墨烯-聚吡咯纳米管杂化材料的制备及电容特性

使用化学连接的方法制备一种石墨烯-聚吡咯纳米管杂化材料。使用扫描电镜、透射电镜、傅里叶变换红外光谱仪、光电子能谱仪以及电化学工作站对产物的形貌、结构以及电容特性进行表征。结果表明,在杂化材料中石墨烯和聚吡咯纳米管分散均匀,在石墨烯与聚吡咯纳米管之间通过酰胺基团形成了共价键连接。此杂化材料在0.3 A.g-1电流密度下的比电容为1 368F.g-1,在1.5 A.g-1电流密度下的比电容为759 F.g-1,在1 000次循环伏安循环后的剩余比电容值为初始比电容值的85.5%,显示出良好的电容特性。     

Layered Al‐substituted Cobalt Hydroxides/GO Composites for Electrode Materials of Supercapacitors

In this work, Al‐substituted α‐Co(OH)₂/GO composites with supercapacitive properties were prepared by chemical co‐precipitated method in which cobalt nitrate and aluminum nitrate were used as the raw material, and graphite oxide was employed as carrier. The as‐prepared materials were characterized by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and fourier transform infrared spectroscopy (FT‐IR). Cyclic voltammetry (CV) and galvanostatic charge/discharge measurements showed that the Al‐substituted α‐Co(OH)₂/GO electrode material had excellent electrochemical capacitance. The specific capacitance of 1137 F·g⁻¹ was achieved in 6 mol/L KOH solution at a current density of 1 A·g⁻¹ within a potential range of 0–0.5 V. Moreover, only 12% losses of the initial specific capacitance were found after 500 cycles at a current density of 1 A·g⁻¹.     

Thiourea aldehyde resin-based carbon/graphene composites for high-performance supercapacitors

Thiourea aldehyde resin-based heteroatom doping carbon and graphene composites (RHDC/GN) were prepared by an in situ polymerization and carbonization. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images showed that thiourea aldehyde resin deposited on lamellar GO flakes during the polymerization and RHDC/GN composites had a hierarchical structure. The specific capacitance of the RHDC/GN composites was high up to 355 F g^?1, much higher than that of the pure thiourea aldehyde resin-based heteroatom doping carbon (RHDC) with specific capacitance of 135 F g^?1 at a current density of 1.0 A g^?1 in 6-M KOH electrolyte. And the hetroatoms in RHDC/GN composites increase the specific capacitance, and GN enhances the conductivity of the electrodes which is beneficial to improving electrochemical cycling stability of the electrode significantly. The specific capacitance retains 90.97% after 5000 charge-discharge processes at 10 A g^?1, which provides potential as supercapacitors.     

锂离子电池正极材料LiV3-xAlxO8的水热合成与性能

采用水热法制备了Al掺杂的锂二次电池正极材料LiV3-xAlxO8,并用X射线衍射和扫描电镜对材料的晶体结构和形貌进行了表征.以50 mA·g-1进行恒流充放电测试,结果表明Al掺杂能够明显改善材料的电化学性能.在掺杂改性的LiV3-xAlxO8材料中,LiV2.93Al0.07O8的初始容量最高,达到325 mAh·g-1.当掺杂量为x=0.04时,材料的循环性能最佳.LiV2.96Al0.04O8经20次循环后仍保持179 mAh·g-1的比容量,且充放电效率始终维持在98%左右.     

Co3O4纳米片的制备及其电化学电容性能

以配位超分子化合物为前驱物,通过液相氧化分解得到了六方形CoOOH纳米片,进而在空气中热处理制得了Co₃O₄纳米片。利用XRD、TEM、FESEM对CoOOH和Co₃O₄纳米片的结构和形貌进行了表征。电化学测试表明,Co₃O₄纳米片电极在6 mol·L^-1 KOH溶液中表现出良好的电化学电容特性,在电流密度为1 A·g^-1其单电极比容量可达到227 F·g^-1。     

Design of high-performance core-shell hollow carbon nanofiber@nickel-cobalt double hydroxide composites for supercapacitive energy storage

The supercapacitive performances of supercapacitor mainly depend on the physical nanostructure and micro-morphology of electrode materials. Here, we demonstrated the design, synthesis and electrochemical performances of core-shell hollow carbon nanofiber@nickel-cobalt-layered double hydroxide (HCNF@ Ni_0.67Co_0.33-LDH) nanocomposites with an optimized Ni/Co molar ratio of 2:1. The HCNF was used as superiorly conductive core to sustain the nanoporous silky Ni_0.67Co_0.33-LDH shell, which can efficiently provide fast transport pathways for electrons and electrolyte ions. The outstanding specific capacitance of 2486 F g^?1 at 1 A g^?1 based on galvanostatic charge-discharge curves were acquired for the highly electroactive HCNF@Ni_0.67Co_0.33-LDH. Furthermore, the HCNF@Ni_0.67Co_0.33-LDH electrode delivered a distinguished rate capability with a specific capacitance of 1890 F g^?1 even at 15 A g^?1. Notably, an asymmetric supercapacitor with HCNF@Ni_0.67Co_0.33-LDH as cathode and HCNF as anode was devised, which presented a prominent specific capacitance of 228 F g^?1, good energy density of 62.1 Wh kg^?1, and impressive cycling stability (90.6% capacitance retention after 10,000 cycles).     

From nickel oxalate dihydrate microcubes to NiS<Subscript>2</Subscript> nanocubes for high performance supercapacitors

In this study, NiS₂ nanocubes were successfully synthesized by a novel facile solvothermal method using NiC₂O₄·2H₂O microstructures and used as an electrode for high-performance supercapacitors. The electrochemical properties of the prepared NiS₂ electrode were studied using galvanostatic charge–discharge analysis, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) studies. Its maximum specific capacitance was 2077 F g^?1 at a constant current density of about 0.65 A g^?1. Further, the EIS results confirmed the pseudocapacitive nature of the NiS₂ electrode. The experimental results suggested that the NiS₂ electro-active material demonstrates excellent electrochemical performance with high specific capacitance, low resistance, and excellent cycling stability.     

KOH‐Activated Porous Carbons Derived from Chestnut Shell with Superior Capacitive Performance

Porous carbons (PC) were prepared from a waste biomass named chestnut shell via a two‐step method involving carbonization and KOH activation. The morphology, pore structure and surface chemical properties were investigated by scanning electron microscopy (SEM), N₂ sorption, Raman spectroscopy, X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The carbons have been evaluated as the electrode materials for supercapacitors by a two‐electrode system in 6 mol/L KOH electrolyte. Benefiting from the porous texture, high surface area and high oxygen content, the PCs derived from chestnut shell have exhibited high specific capacitance of 198.2 (PC‐1), 217.2 (PC‐2) and 238.2 F·g^?1 (PC‐3) at a current density of 0.1 A·g^?1, good rate capability of 55.7%, 56.6% and 54.9% in a range of 0.1–20 A·g^?1 and high energy density of 5.6, 6.1 and 6.7 Wh·kg^?1, respectively. This is believed to be due to electric double layer capacitance induced by the abundant micropores and extra pseudo‐capacitance generated by oxygen‐containing groups. At a power density of 9000 Wh·kg^?1, the energy density is 3.1, 3.5 and 3.7 Wh·kg^?1 for PC‐1, PC‐2 and PC‐3, respectively, demonstrating the potential of the carbons derived from chestnut shells in energy storage devices.     

In situ synthesis of crosslinked-polyaniline nano-pillar arrays/reduced graphene oxide nanocomposites for supercapacitors

Crosslinked-polyaniline (CPA) nano-pillar arrays adsorbed on the surface of reduced graphene oxide (RGO) sheets were synthesized by in situ solution polymerization through two steps of reduction. The electrochemical analyses demonstrated that the befittingly reduced CPA/RGO composite exhibited high performance as electrode materials for supercapacitors. The CPA/RGO composite showed very high specific capacitance of 1532 F g^?1 at a scan rate of 10 mV s^?1 or 694 F g^?1 at a current density of 2 A g^?1 in 1 M H₂SO₄ electrolyte, as well as great energy density of 61.4 W h kg^?1 at a current density of 2 A g^?1. The electrode material also had decent power density of 4 kW kg^?1 at a current density of 10 A g^?1, and good cycling stability of 92.5 % capacitance retained after 500 cycles of cyclic voltammetry at 500 mV s^?1. The neat microstructures and super electrochemical properties suggest the potential use of the composites in supercapacitors.     

Electrospun porous MnMoO<Subscript>4</Subscript> nanotubes as high-performance electrodes for asymmetric supercapacitors

MnMoO₄ nanotubes of diameter about 120 nm were successfully synthesized by a single-spinneret electrospinning technique followed by calcination in air, and their structural, morphological, and electrochemical properties were studied with the aim to fabricate high-performance supercapacitor devices. The obtained MnMoO₄ nanotubes display a 1D architecture with a porous structure and hollow interiors. Benefiting from intriguing structural features, the unique MnMoO₄ nanotube electrodes exhibit a high specific capacitance, excellent rate capability, and cycling stability. As an example, the tube-like MnMoO₄ delivers a specific capacitance of 620 F g^?1 at a current density of 1 A g^?1, and 460 F g^?1 even at a very high current density of 60 A g^?1. Remarkably, almost no decay in specific capacitance is found after continuous charge/discharge cycling for 10,000 cycles at 1 A g^?1. An asymmetric supercapacitor fabricated from this MnMoO₄ nanotubes and activated carbon displayed a maximum high energy density of 31.7 Wh kg^?1 and a power density of 797 W kg^?1, demonstrating a good prospect for practical applications in energy storage electronics.     

Microwave-assisted synthesis of organic–inorganic poly(3,4-ethylenedioxythiophene)/RuO2·xH2O nanocomposite for supercapacitor

An organic–inorganic poly(3,4-ethylenedioxythiophene) (PEDOT)/RuO₂·xH₂O nanocomposite (approximately 1 wt.% RuO₂) has been successfully prepared for the first time under microwave irradiation within 5 min with power 900 W via in situ chemical polymerization. The morphology and structure of the resultant material is characterized by transmission electron microscope and Fourier transform infrared. Moreover, the electrochemical properties of the synthesized nanocomposite can be controlled by adjusting the annealing temperature, which is definitely illustrated by cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectra. Electrochemical data have shown that the PEDOT/RuO₂·xH₂O nanocomposite annealed at 150 °C possesses the most favorable charge/discharge ability with a specific capacitance of 153.3 F g⁻¹ at a current density of 150 mA g⁻¹ and the high efficient utilization of PEDOT at various current densities. Furthermore, such composite has a less capacitance degradation of 23.8% after 1,000 continuous cycles. The improved electrochemical performance are mainly attributed to the large electroactive surface of nanocomposite and the existence of amorphous RuO₂·xH₂O particles as well as a synergistic effect of the polymer PEDOT and annealed RuO₂·xH₂O. Thus, the PEDOT/RuO₂·xH₂O nanocomposite annealed at 150 °C can act as a promising electroactive material for supercapacitor application.     

Enhanced electrochemical performance of straw-based porous carbon fibers for supercapacitor

The efficient utilization of natural biomass as renewable raw materials is of importance. We herein prepared porous carbon fibers (PCFs) by activation of the extracted cellulose microfibers from the agriculture byproduct of corn straw. Different from the porous carbons (PCs) by directly activating straw, the obtained PCFs had typical one-dimensional morphology with high surface area (2013 m² g^?1) and large pore volume (1.27 cm³ g^?1). The influence of the ZnCl₂/cellulose mass ratio on the electrochemical performance was studied, and the optimized PCF(1:1) possessed a much higher specific capacitance than the PC(1:1) sample, which was attributed to the improved specific surface area as well as the fiber-like morphology where it had short ion diffusion route and small interfacial resistance in comparison to PCs. PCFs have a high specific capacitance of 230 F g^?1 at 0.5 A g^?1, and 183 F g^?1 was retained at 20 A g^?1 (79.6%), revealing an excellent rate capability. The assembled symmetrical supercapacitor exhibited a wide potential window of 1.8 V, small electrochemical impedance, and superior cycle performance. Moreover, a high energy density of 16.0 Wh kg^?1 was obtained at a power density of 450.4 W kg^?1, which was preserved of 6.9 Wh kg^?1 at a high power density of 14,194.3 W kg^?1.