Curing behavior of epoxy resins with a series of novel curing agents containing 4,4′-biphenyl and varying methylene units

A new homologous series of curing agents (LCECAn) containing 4,4′-biphenyl and n-methylene units (n = 2, 4, 6) were successfully synthesized. The curing behaviors of a commercial diglycidyl ether of bisphenol-A epoxy (E-51) and 4,4′-bis(2,3-epoxypropoxy)biphenyl (LCE) by using LCECAn as the curing agent have been investigated by differential scanning calorimetry (DSC), respectively. The Ozawa equation was applied to the curing kinetics based upon the dynamic DSC data, and the isothermal DSC data were fitted using an autocatalytic curing model. The glass transition temperatures (T _g) of the cured epoxy systems were determined by DSC upon the second heating, and the thermal decomposition temperatures (T _d) were obtained by thermogravimetric (TG) analyses. The results show that the number of methylene units in LCECAn has little influence on the curing temperatures of E-51/LCECAn and LCE/LCECAn systems. In addition, the activation energies obtained by the dynamic method proved to be larger than those by the isothermal method. Furthermore, both the T _g and T _d of the cured E-51/LCECAn systems and LCE/LCECAn systems decreased with the increase in the number of methylene units in LCECAn.     

Interface and properties of epoxy resin modified by elastomeric nano-particles

Epoxy resin has been widely used as structuralmaterials and adhesives in electronics, aerospace in-dustries and etc. for its impressive overall properties.However, epoxy network is brittle and notch sensitive,which restricts its application scope. As a re…     

Synthesis and thermal stability of a novel phosphorus-nitrogen containing intumescent flame retardant

A novel phosphorus-nitrogen containing intumescent flame retardant （P-N IFR） was prepared via the reaction of dichlor-opentate with N-methylaniline. The structure of the product was confirmed by ^1H NMR, ^31p NMR, MS and IR. TGA analysis showed it has effective thermal stability.     

Synthesis and characterization of novel multifunctional epoxy resin

A novel multifunctional epoxy resin was synthesized by polyphenol and epichlorohydrin.The structure and molecular weight ofthe multifunctional epoxy were characterized by FTIR and ESI-MS.DSC and DMTA were used to investigate the thermal propertyof multifunctional epoxy cured by DDS.The thermal resistance of the synthesized multifunctional epoxy was much better than astandard diglycidyl ether of bisphenol-A epoxy.     

Effect of modifiers on properties and curing of aqueous emulsions of ED-20 epoxy resin in the presence of еpilink 701 cross-linking agent

The dependence of the stability and structural-rheological properties of aqueous emulsions of an epoxy resin on the type and concentration of the modifier was examined. The working time, degree of curing, microstructure, and physicomechanical properties of polymer materials were studied in relation to the modifier type and its concentration in emulsions.     

Investigation of curing kinetics of epoxy resin/novel nanoclay–carbon nanotube hybrids by non-isothermal differential scanning calorimetry

Chemical hybrid of nanoclay (NC)/carbon nanotube (CNT) was synthesized via growth of CNTs by chemical vapor deposition. The cure kinetics of epoxy resin in the presence of novel chemical hybrid of NC/CNT (CNC) was studied by non-isothermal differential scanning calorimetry. The effect of the CNC on cure kinetics was compared with conventional nanofillers such as CNTs, NC, and physical mixture of them (PNC). The kinetic parameters of the cure reaction were determined by iso-conversional method. The accelerating effect of CNT, CNC, and PNC in initial stage of cure reaction was related to the high thermal conductivity of CNTs, while the decelerating effect of nanofillers as the cure proceeded can be attributed to the reduction of polymer molecules motion caused by enhanced viscosity. The apparent activation energy (E _α) as the function of conversion (α) was calculated by five methods categorized into two different types: (1) conversion-dependent methods: Kissinger–Akahira–Sunose (KAS), Ozawa–Flynn–Wall (OFW), and Friedman; (2) conversion-independent methods: Kissinger and Augis. The accelerating effect of CNT, PNC, and CNC was observable as the reduced E _α values in low conversion only with KAS and OFW methods. The reverse trend of E _α values was observed with the introduction of these nanofillers at high conversions. The uniqueness of the CNC was more marked in increasing E _α values of epoxy after initial stage due to its special 3D structure of CNC. Calculated data using KAS and OFW methods showed the best agreement with the obtained experimental data.     

Curing and thermal behaviour of a flame retardant cycloaliphatic epoxy resin based on phosphorus containing poly(amide–imide)s

The curing behaviour of 3,4-epoxycyclohexylmethyl 3,4-epoxycyclohexane carboxylate was investigated by the dynamic differential scanning calorimetry (DSC) using phosphorus-containing poly(amide–imide)s (PAIs) having free amine groups, 4,4′-diaminodiphenylmethane (PM) and p-phenylenediamine (PA), in the ratio of 1:1. The PAIs were prepared by co-polymerization of diimide–diacid (DIDA) and phosphorus-containing triamines having phenylene moiety. l-Tryptophan and pyromellitic anhydride were used to synthesize DIDA. Triamines used in the synthesis PAIs were tris(3-aminophenyl) phosphine (TAP), tris(3-aminophenyl) phosphine oxide (TAPO) and bis(3-aminophenyl) aminotolyl phosphine (BAP). TAP-, TAPO- and BAP-containing PAIs were designated as PTAP, PTAPO and PBAP, respectively. These PAIs with free amine groups were characterized by FTIR, ¹H NMR, ¹³C NMR spectroscopic techniques and elemental analysis. The mixture of PAIs and PM or/and PA in the ratios of 0:1, 1:0 and 0.5:0.5 was used for investigation. DSC was used to study the curing of epoxy by recording the DSC scans at heating rates of 10 °C min^?1. Thermal stability of epoxy resin cured isothermally was evaluated by recording thermo gravimetric traces in nitrogen atmosphere at the heating rate of 20 °C min^?1. All samples are highly stable, and the 10 % mass loss found was in the range of 335–520 °C. The percent char yield was highest in case of resin sample E/PM/PTAPO. The flame-retardant properties of cured epoxy resins were investigated by the limiting oxygen index test (LOI) and UL94 test. When phosphorus was incorporated in epoxy resin, the epoxy resin system met the UL94 V-0 classification and the LOI reached at 37.8, because of nitrogen–phosphorus synergistic effect.     

Cluster structure of epoxy-phenolic polymer prepared by curing a mixture of epoxy-4,4′-isopropylidenediphenyl and phenol-formaldehyde oligomers

The kinetics of viscosity variation and the concentration and kinetic modes of precondensation of a mixture of epoxy-4,4-isopropylidenediphenyl and phenol-formaldehyde oligomers in Cellosolve solutions in the presence of phosphoric acid at 333 K were studied. The cluster structure parameters of the chemical network of epoxy-phenolic polymeric coating on a tin plate, obtained by thermal curing of precondensates of an oligomer mixture, were determined using the silver chloride sputtering method.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 8, 2004, pp. 1382–1388.Original Russian Text Copyright © 2004 by Krasovskii, Novikov, Filippov.     

The effect of stoichiometry on curing and properties of epoxy–clay nanocomposites

Epoxy–clay nanocomposites have been prepared with an organically modified montmorillonite. The epoxy network was based on diglycidyl ether of bisphenol A (DGEBA) cured with diaminodiphenylmethane (DDM). The stoichiometry DGEBA–DDM was varied, the molar ratio of amine hydrogen/epoxy groups, r, ranged from 0.85 to 1.15. The influence of stoichiometry on curing and properties of the nanocomposites was studied using differential scanning calorimetry, dynamic mechanical thermal analysis and X-ray diffraction. All nanocomposites had intercalated clay structures. The clays accelerated the curing reaction whose rate was also increased when increasing r. The heat of reaction, −ΔH (J/g epoxy), increased as r increased, reaching a constant value for r ≥ 1. In the presence of clays −ΔH was lower than in the neat DGEBA–DDM. The glass transition temperature (T _g) of the neat epoxy thermosets reached a maximum at r = 1; however, the nanocomposites showed the T _g maximum at 0.9 < r < 1. The presence of clay lowered the T _g for r > 0.94 and raised T _g for r ≤ 0.85. The elastic modulus of neat epoxy thermosets reached a maximum in the rubber state and a minimum in the glassy state at r = 1. The nanocomposites showed similar behavior, but the maximum and the minimum values of the elastic modulus were reached at stoichiometry r < 1. The comparison of the properties of neat epoxy with those of the nanocomposites varying the stoichiometry indicates that the clay itself induces stoichiometric changes in the system.     

Synthesis and curing of a novel amino-containing phthalonitrile derivative

A novel phthalonitrile derivative containing an amino group, 3,5-bis(3,4-dicyanophenoxy)aniline (CPA), was synthesized via a nucleophilic displacement of 4-nitrophthalonitrile and 5-aminoresorcinol hydrochloride. The structure of CPA was confirmed by Fourier transform infrared spectra (FT-IR) and nuclear magnetic resonance (1H NMR). Thermal analysis performed on CPA revealed that the novel phthalonitrile derivative showed a self-promotion curing behavior and the resulting polymer exhibited outstanding heat-resistance.     

Thermal stability of phosphorus-containing styrene–acrylic copolymer and its fire retardant performance in waterborne intumescent coatings

Phosphorus-containing styrene–acrylic copolymers are synthesized by free radical seeded emulsion polymerization with the monomers of MMA/St/BA/MAA and phosphorus-containing vinyl monomer (SIPOMER PAM100). The properties of copolymer films are characterized by water adsorption test, thermogravimetry, Fourier transform infrared spectroscopy (FTIR), and energy dispersive spectroscopy (EDS), etc. The copolymer emulsions are used as the binder in an intumescent coatings formulation, and the fire-retardant performances of the coatings are determined by an instrument which the furnace temperature is analoging the cellulose fire temperature. The water adsorption of copolymer film increases remarkably owing to the increasing of phosphoric acid group in the polymer chain. The thermal decomposition stability and thermal-oxidative decomposition stability of the copolymer are improved when PAM100 is introduced into its chain, which is strongly supported by the FTIR and EDS results of copolymer residual treated at different temperature. The EDS results also illustrate that the fire retardancy enhanced by PAM100 during combustion owing to the condensed-phase mechanism. The fire-retardant test results show that the intumescent coatings using StA-P_1.5 copolymer emulsion as the binder obtains the best fire retardant performance. We suggested that StA-P_1.5 presents the lower reactivity with the acid source (APP) in 275–400 °C, and the higher reactivity with APP when the temperature is greater than 500 °C would be benefit for the swelling–charring process and the final fire retardant performance. The exorbitant crosslinking in StA-P₇ brings a negative effect on the fire-retardant performance of intumescent coatings, even if it introduces a densy swollen char layer.     

Effect of thermal curing on the properties of thin films based on benzophenonetetracarboxylic dianhydride and 4,4′-diamino-3,3′-dimethyldiphenylmethane

The processing of polyimide films from polyamidic acid solutions involves the simultaeous loss of solvent and chemical conversion, and may imply structural reorganization such as orientation or crystallization. The effect of thermal treatment on the thermal, mechanical and dielectric properties of polymer films based on benzophenonetetracarboxylic dianhydride and 4,4’-diamino-3,3’-dimethyl diphenylmethane have been investigated. The thermal treatment of polyamidic acid at different temperatures led to compounds with different degree of imidization; it turned out that the imidization process took place with high speed until 240 °C and then remained constant. The dynamic mechanical analysis (DMA), contact angles, and dielectric measurements revealed that the storage modulus and contact angles increased with increasing of curing temperature while the dielectric constant decreased.     

Tailoring of multifunctional cellulose fibres with “lotus effect” and flame retardant properties

This research aimed to create multifunctional cellulose fibres with water- and oil-repellent, self-cleaning, and flame retardant properties. A sol mixture of fluoroalkyl-functional siloxane, organophosphonate and methylol melamine resin was applied to cotton fabric by the pad-dry-cure method. Successful coating was verified by atomic force microscopy and Fourier transform infrared spectroscopy. The functional properties of the coated fibres were investigated using the static contact angles of water and n-hexadecane, the water sliding angles, the vertical test of flammability, the limiting oxygen index, and simultaneous thermal analysis. The results reveal that a homogeneous composite inorganic–organic polymer film formed on the cotton fabric surface exhibited the following properties: static contact angle of water of 150° and of n-hexadecane of 128°, water sliding angle of 10°, limiting oxygen index of 34 %, and high thermal stability. These results demonstrate the synergistic activity of the compounds in the coating, which resulted in the creation of a “lotus effect” on the fabric surface as well as excellent flame retardancy and thermal stability.     

Effect of a novel charring agent on thermal degradation and flame retardancy of acrylonitrile–butadiene–styrene

A novel charring agent poly(p-propane terephthalamide) (PPTA) was synthesized by using terephthaloyl chloride and 1,3-propanediamine through solution polycondensation and it was used together with ammonium polyphosphate (APP) to prepare a novel intumescent flame retardant (IFR) for ABS. The thermal degradation behaviour and flame retardancy were investigated, the results showed that PPTA could be effective as a charring agent, the flame retardancy of ABS and the mass of residues improved greatly with the addition of IFR. When the content of APP was 22.5 mass% and PPTA was 7.5 mass%, the limiting oxygen index (LOI) value of IFR-ABS system was found to be 32.4, and class V-0 of UL-94 test was passed. Moreover, the synergistic effects of two different adjuvants AlPi and MnO₂ in IFR-ABS system have been studied.     

Electrochemical and spectroscopic properties of poly-4,4′-dialkoxy-2,2′-bipyrroles

The structure and the electrochemical and spectral properties of two conductive electrochemically polymerized substituted bipyrroles 4,4′-methoxy-2,2′-bipyrrole and 4,4′-buthoxy-2,2′-bipyrrole were studied and compared. The polymers were characterized by cyclic voltammetry, FT-Raman spectroscopy, scanning electron microscopy, and in situ conductivity measurements at different pH and redox state.     

Effect of modification with rubber on properties and process of curing of epoxy–rubber adhesive compositions

The effect of SKN-30KTRA low molecular weight rubber on the elastic and strength properties of adhesive compositions made with epoxy-rubber composition, is shown. The data on the effect of rubber on curing of adhesive compositions are presented.     

Synthesis and properties of 2,2′-dipyridyl and 4,4′-dipyridyl complexes with thulium salts

Summary New complexes of 2,2-dipyridyl and 4,4-dipyridyl with thulium salts TmX ₃ (whereX=Cl^–, Br^–, NO ₃ ^– , NCS^–, and ClO ₄ ^– ) have been prepared and their solubilities in water at 21 °C were determined. The IR spectra of these compounds are discussed. The conditions of thermal decomposition of the complexes were also studied.

---

Synthese und Eigenschaften von 2,2-Dipyridyl- und 4,4-Dipyridylkomplexen mit Thuliumsalzen

Zusammenfassung Es wurden neue 2,2-Dipyridyl- und 4,4-Dipyridyl-Komplexen mit Thuliumsalzen TmX ₃ (X=Cl^–, Br^– No ₃ ^– , NCS^–, ClO ₄ ^– ) dargestellt und ihre Wasserlöslihkeit bei 21 °C bestimmt. Die IR-Spektren werden diskutiert. Das thermische Verhalten der erhaltenen Komplexe wurde untersucht.

     

Coloring properties of novel 1,4-distyrylbenzene and 4,4′-distyrylbiphenyl fluorescent brighteners and their arrangement in cotton and polyester fiber

Some novel 1,4-distyrylbenzene (DSB) and 4,4′-distyrylbiphenyl (DSBP) fluorescent brighteners (FBs) were used to dye polyester and cotton fabrics. The CIE whiteness, color hue and reflectance spectrum of dyed fabrics were compared. DSBP derivatives could dye the cotton and polyester fabrics with a higher whiteness level and had a lower fluorescent quenching concentration than DSB derivatives. The color hue for the fabric dyed with DSB FBs was yellow-green, whereas that dyed with DSBP was blue–violet. The molecular arrangement in the fiber had a significant influence on their optical properties, resulting in different coloring properties. The increase in molecule planarity and rigidity generated by the interaction between the polymer and FB molecules caused a remarkable bathochromic shift in emission and excitation spectra. The H-aggregate of the DSB molecule in the fiber was easily generated, and the degree of aggregation increased with the molecular polarity. However, the aggregation of DSBP molecules in the polyester and cotton fiber was not found. The surface region of the cotton fiber was filled with FB molecules, whereas FB molecules in the polyester fiber aggregated easily, and incident light could pass through the surface region.     

Preparation of 2CaO·3B2O3·H2O nanomaterials and evaluation of their flame retardant properties by a thermal analysis method

Different morphologies of calcium borate 2CaO·3B₂O₃·H₂O, nanoribbon, bundle-like nanostructure and fan-shaped non-nanostructure, have been prepared under hydrothermal conditions, which were characterized by XRD, FT-IR, TGA and SEM. Their flame retardant properties to the polypropylene were investigated by thermal analysis method (including TG, DSC and non-isothermal decomposition kinetics) and oxygen index method. With the decrease in TG mass loss, the increase in heat absorption for DSC in N₂ atmosphere, the increase in LOI values, and the increase in apparent activation energy E_a, the flame retardant properties of prepared 2CaO·3B₂O₃·H₂O samples increased gradually from non-nanostructure to bundle-like nanostructure and then to nanoribbon. This trend may be ascribed to their sizes being decreased accordingly. The flame retarding mechanism has been proposed. The mechanical property of polypropylene/2CaO·3B₂O₃·H₂O composite material has also been evaluated. It can be predicted that 2CaO·3B₂O₃·H₂O nanoribbon could serve as an excellent flame retardant.