An optical image stabilisation using a droplet manipulation on a liquid crystal and polymer composite film

ABSTRACT

We demonstrate an image system with an optical image stabilisation using a droplet manipulation on a liquid crystal (LC) and polymer composite film (LCPCF) to reduce motion blur while preserve image quality. Such an image system adopts a liquid lens on an LCPCF and the mechanism is on a basis of droplet movement on LCPCF whose position changes because electrically tunable orientations of LC molecules on the surface of LCPCF. The change of position of the liquid lens compensates the deviation of light as the image system is under a handshake vibration. As a result, the image system under handshake vibrations could keep a clear image. The operating principles are introduced, and the experiments are performed and discussed. The concept in this paper can also be extended to design other optical components for modulating direction of light.     

Double-layer liquid crystal lens array with composited dielectric layer

ABSTRACT

A double-layer liquid crystal (LC) lens array with composited dielectric layer is proposed. In our design, a spatially non-uniform electric field is generated between the strip electrodes, resulting in a gradient refractive index distribution in the LC layer. Since the upper and lower parts of the LC lens array both adopt a composite dielectric layer, the operation voltage of the LC lens array is effectively reduced. In terms of LC lenslet, the double-layer design doubles the phase difference between the centre and the periphery of the LC layer, thereby reducing the focal length of the LC lens array. In addition, the shortest focal length (~1.78 mm) of the LC lens array is obtained at V = 3.3 V, and the LC lens array has a large focusing range.     

Adaptive nematic liquid crystal lens array with resistive layer

ABSTRACT

We propose an adaptive nematic liquid crystal (LC) lens array using a dielectric layer with low dielectric constant as resistive layer. With the resistive layer and periodic-arranged iridium tin oxide (ITO) electrodes, the vertical electric field across the LC layer varies linearly over the lens aperture is obtained in the voltage-on state. As a result, a centrosymmetric gradient refractive index profile within the LC layer is generated, which causes the focusing behaviour. As a result of the optimisation, a thin cell gap which greatly reduces the switching time of the LC lens array can be achieved in our design. The main advantages of the proposed LC lens array are in the comparatively low operating voltage, the flat substrate surface, the simple electrodes, and the uniform LC cell gap. The simulation results show that the focal length of the LC lens array can be tuned continuously from infinity to 3.99 mm by changing the applied voltage.     

A nonionic surfactant-decorated liquid crystal sensor for sensitive and selective detection of proteins

Proteins are responsible for most biochemical events in human body. It is essential to develop sensitive and selective methods for the detection of proteins. In this study, liquid crystal (LC)-based sensor for highly selective and sensitive detection of lysozyme, concanavalin A (Con A), and bovine serum albumin (BSA) was constructed by utilizing the LC interface decorated with a nonionic surfactant, dodecyl β-d-glucopyranoside. A change of the LC optical images from bright to dark appearance was observed after transferring dodecyl β-d-glucopyranoside onto the aqueous/LC interface due to the formation of stable self-assembled surfactant monolayer, regardless of pH and ion concentrations studied in a wide range. The optical images turned back from dark to bright appearance after addition of lysozyme, Con A and BSA, respectively. Noteworthy is that these proteins can be further distinguished by adding enzyme inhibitors and controlling incubation temperature of the protein solutions based on three different interaction mechanisms between proteins and dodecyl β-d-glucopyranoside, viz. enzymatic hydrolysis, specific saccharide binding, and physical absorption. The LC-based sensor decorated with dodecyl β-d-glucopyranoside shows high sensitivity for protein detection. The limit of detection (LOD) for lysozyme, Con A and BSA reaches around 0.1 μg/mL, 0.01 μg/mL and 0.001 μg/mL, respectively. These results might provide new insights into increasing selectivity and sensitivity of LC-based sensors for the detection of proteins.     

Applications of liquid crystals in biosensing and organic light-emitting devices: future aspects

ABSTRACT

This article summarises recent advances made in our laboratory towards the development of new technological applications, such as biosensors and organic light-emitting diodes (OLEDs) based on liquid crystals (LCs) other than LC displays. The study of biomolecular interaction using LC material relies on the specific interaction between the LC and the biomolecule of interest at interfaces that permit the biomolecular events to be amplified into easily measured signals for various sensing applications. In the first part, we emphases recent studies in the design and modulation of LC-based interfaces based on robust colloidal LC gels for biological amplification, qualitative and quantitative understanding of important biomolecular interactions at LC–aqueous interfaces for diagnostic and laboratory applications and design of LC droplets that hold promise to act as a marker for cells and cell-based interactions. In the second part, we described design of organic materials for application in OLEDs on various discotic monomers, dimers and oligomers. These molecules have the ability to transport charges, holes and electrons. In addition, because of the high conductivity and π–π stacking, they are considered as the advanced materials for practical applications. The technological advances in our laboratory using discotic LCs will be briefly presented in this article.     

Coaxially bifocal liquid crystal lens with switchable optical aperture

An electrically tunable liquid crystal (LC) lens with dual hole-patterned electrodes is demonstrated. When the LC lens is operated at low voltages, the dual hole-patterned electrodes with different diameters impart the lens with a coaxial bifocal characteristic. At high voltages, the proposed LC lens functions as a conventional lens with a single focal length but with a switchable optical aperture. The demonstrated LC lens is free of disclination lines because of the presence of voltage-assisted high pretilt angles created from the upmost hole-patterned electrode with small diameter.     

Optofluidic variable-focus lenses for light manipulation

This paper presents a planar optofluidic lens for light manipulation utilizing a combination of optofluidic biconvex lens with micromixer. Three light manipulation techniques including tunable optical diverging, collimating and focusing are realized by altering the refractive index of the optofluidic variable-focus lenses formed by solid polydimethylsiloxane (PDMS) walls and tunable liquid lens body. The optical power from the laser input can be increased or decreased with the tuning of the variable-focus lenses' refractive indexes. The optical power adjustment capabilities are demonstrated and characterized. The combinations of benefits of all lens' optical manipulation capabilities, greater mechanical stability, significant increase of optofluidic device's life time and seamless integration with other lab-on-a-chip functionalities provide a promising and versatile optofluidic compartment to integrate with lab-on-a-chip excitation and sensing applications. Optofluidic lens-including system for tunable fluorescence sensing is demonstrated showing 186% increase in detected fluorescence intensity.     

Director patterns and inversion walls in 2D inhomogeneously deformed nematic LC layers

Abstract

With progressing resolution of dot matrix displays, effects of inhomogeneous electric fields at the edges of structured electrodes become more and more important in the optical performance. We present a new method of polarizing microscopy for the study of the director field in two-dimensionally inhomogeneous nematic LC layers. Planar cells with electrode strips are investigated. The novel effects observed in these systems are two types of inversion walls, depending upon the preferred director orientation at the glass plates with respect to the electrodes.     

Detecting and differentiating Escherichia coli strain TOP10 using optical textures of liquid crystals

We report a method for detecting Escherichia coli using a nematic liquid crystal (LC), 4-cyano-4′-pentylbiphenyl (5CB). Among three E. coli strains tested, TOP10 strain grown on agar plates induces a homeotropic orientation of LCs whereas DH5α and JM109 strains do not. This results in a clear distinction in the optical appearance of LCs as either uniformly dark or bright under polarised light. The LC-based method provides a simple, rapid and low-cost method of identifying E. coli strains.     

Laser-written polymeric scaffolds for micro-patterned liquid crystal alignment

ABSTRACT

We demonstrate that two-photon polymerisation-based direct laser writing (TPP-DLW) is a very convenient technique for the fabrication of tunable liquid crystal (LC) based optical diffractive structures. The underlying TPP-DLW scaffold is composed of out-of-plane oriented polymeric ribbons with surface relief gratings on their side walls that induce parallel alignment of the adjacent LC medium. With the aid of such scaffolds infiltrated with the standard nematic liquid crystalline mixture E7, we prepared optical transmission gratings whose diffraction efficiency can be tuned with electric or magnetic fields. We report on an experimental and theoretical comparison between both types of tuning mechanisms.     

UVA Light‐mediated Ascorbate Oxidation in Human Lenses

Whether ascorbate oxidation is promoted by UVA light in human lenses and whether this process is influenced by age and GSH levels are not known. In this study, we used paired lenses from human donors. One lens of each pair was exposed to UVA light, whereas the other lens was kept in the dark for the same period of time as the control. Using LC‐MS/MS analyses, we found that older lenses (41–73 years) were more susceptible to UVA‐induced ascorbate oxidation than younger lenses (18–40 years). Approximately 36% of the ascorbate (relative to control) was oxidized in older lenses compared to ~16% in younger lenses. Furthermore, lenses with higher levels of GSH were less susceptible to UVA‐induced ascorbate oxidation compared to those with lower levels, and this effect was not dependent on age. The oxidation of ascorbate led to elevated levels of reactive α‐dicarbonyl compounds. In summary, our study showed that UVA light exposure leads to ascorbate oxidation in human lenses and that such oxidation is more pronounced in aged lenses and is inversely related to GSH levels. Our findings suggest that UVA light exposure could lead to protein aggregation through ascorbate oxidation in human lenses.     

Development and Application of Liquid Crystals as Stimuli-Responsive Sensors

This focused review presents various approaches or formats in which liquid crystals (LCs) have been used as stimuli-responsive sensors. In these sensors, the LC molecules adopt some well-defined arrangement based on the sensor composition and the chemistry of the system. The sensor usually consists of a molecule or functionality in the system that engages in some form of specific interaction with the analyte of interest. The presence of analyte brings about the specific interaction, which then triggers an orientational transition of the LC molecules, which is optically discernible via a polarized optical image that shows up as dark or bright, depending on the orientation of the LC molecules in the system (usually a homeotropic or planar arrangement). The various applications of LCs as biosensors for glucose, protein and peptide detection, biomarkers, drug molecules and metabolites are extensively reviewed. The review also presents applications of LC-based sensors in the detection of heavy metals, anionic species, gases, volatile organic compounds (VOCs), toxic substances and in pH monitoring. Additionally discussed are the various ways in which LCs have been used in the field of material science. Specific attention has been given to the sensing mechanism of each sensor and it is important to note that in all cases, LC-based sensing involves some form of orientational transition of the LC molecules in the presence of a given analyte. Finally, the review concludes by giving future perspectives on LC-based sensors.     

MALDI imaging mass spectrometry of β‐ and γ‐crystallins in the ocular lens

Lens crystallin proteins make up 90% of expressed proteins in the ocular lens and are primarily responsible for maintaining lens transparency and establishing the gradient of refractive index necessary for proper focusing of images onto the retina. Age‐related modifications to lens crystallins have been linked to insolubilization and cataractogenesis in human lenses. Matrix‐assisted laser desorption/ionization (MALDI) imaging mass spectrometry (IMS) has been shown to provide spatial maps of such age‐related modifications. Previous work demonstrated that, under standard protein IMS conditions, α‐crystallin signals dominated the mass spectrum and age‐related modifications to α‐crystallins could be mapped. In the current study, a new sample preparation method was optimized to allow imaging of β‐ and γ‐crystallins in ocular lens tissue. Acquired images showed that γ‐crystallins were localized predominately in the lens nucleus whereas β‐crystallins were primarily localized to the lens cortex. Age‐related modifications such as truncation, acetylation, and carbamylation were identified and spatially mapped. Protein identifications were determined by top‐down proteomics analysis of lens proteins extracted from tissue sections and analyzed by LC‐MS/MS with electron transfer dissociation. This new sample preparation method combined with the standard method allows the major lens crystallins to be mapped by MALDI IMS.     

Liquid crystal alignment induced by controllable surface wettability of BiFeO3 bumps thin layer

The alignment of liquid crystals (LCs) in LC-based optical devices determines the visual quality of devices, and a simple pretreatment is necessary for LC alignment. Here, we present a BiFeO₃ (BFO) thin layer working as an alignment layer, homogeneously aligning LCs after a pre-thermal annealing treatment. Dramatic BFO bumps were observed during the thermal annealing process, and a corresponding enhancement in wettability was detected from measurement of tunable contact angles. LCs in the BFO bump thin layer sandwiched TN cell were found to be perfectly homogeneously aligned due to the enhanced anisotropy and wettability caused by the morphology change of the thin layer.     

A switchable optical diffuser based on a polymer/nematic liquid crystal composite film with transient polymer balls-networks microstructure

ABSTRACT

With the increasing development of multifunction liquid crystal displays (LCDs), multifunction optical diffusers have attracted more attention. In this work, switchable optical diffusers based on the transient polymer balls-networks in polymer/nematic liquid crystal composite films have been prepared and investigated, and the effects of thiol content, curing time, LC content and photo-initiator content on the polymer microstructures and optical properties of optical diffusers are systematically studied. An optical diffuser with the transient polymer balls-networks microstructure has achieved the high transmission (96.42%), high haze (90.49%), excellent optical diffusing ability and wide viewing angle of 150° (from ?75° to 75°) on its off state. By the application of electric field of 40.0 voltage, the viewing angle of the optical diffuser turns to be narrower (from ?60° to 60°), which gives great applications in tunable viewing angle devices and other electric optical devices.     

Cholesteric liquid crystal displays as optical sensors of barbiturate binding

The influence on the optical properties of cholesteric liquid crystal displays (LCDs) was examined for neutral molecule binding by mesogen/receptors in the mesomorphic phase. The motivation was to prepare neutral molecule sensors that use a colour change to signal analyte binding. A receptor that binds barbiturate analytes was modified with two or one cholesteryl groups to yield compounds 2 and 3, respectively. LCDs were prepared by incorporating one of the receptor/mesogen compounds into a cholesteric LC blend along with a potential H‐bonding guest. The optical properties of the LCDs were then determined by measuring the absorbance of the displays. For various LCDs, the colour of the display depended upon several factors: the amount of guest molecule used, the number of cholesteryl side chains on the receptor and the mole concentration of receptor/mesogen in the blend. In particular, complementary host/guest binding of H‐bonding analytes by the bis(cholesteryl) receptor 2 in a cholesteric LCD caused a change of up to +70 nm, which was observed by the naked eye as a blue‐to‐orange colour change. Control experiments confirm that the colour of an LCD is a consequence of molecular recognition in the mesomorphic phase.     

Aldose reductase inhibitory activity studies of THERACURMIN

THERACURMIN a commercially available nano-dispersion of curcumin used to treat after effects of alcohol has been evaluated for in vitro ARI activity on Aldose reductase isolated from the bovine lens. As envisaged, the product displays better ARI activity with IC₅₀ value of 3 μM. The observed ARI activity of THERACURMIN is of therapeutic significance as the limited bioavailability of curcumin limits its clinical use.     

Non-symmetric chiral nematic liquid crystal dimers containing trifluoromethyl and 1,2-propanediol

ABSTRACT

A series of non-symmetric liquid crystal (LC) dimers with the same chiral core 1,2-propanediol (PD) have been synthesised, termed as ABBA-PD-TFBA, PBBA-PD-TFBA, ABA-PD-TFBA, PBA-PD-TFBA and AA-PD-TFBA, respectively, in which one of the two mesogenic groups, the fluorinated mesogenic unit, was kept fix and the other arm was different. The intermediate compounds and LC dimers were characterised by FTIR, ¹H NMR, differential scanning calorimetry, thermogravimetric analysis, polarised optical microscopy and X-ray diffractometer (XRD). The results of the measurements indicated that ABBA-PD-TFBA, PBBA-PD-TFBA and ABA-PD-TFBA displayed optical activity and enantiotropic chiral nematic phase, and PBA-PD-TFBA was an enantiotropic nematic LC while AA-PD-TFBA was a monotropic LC, displaying both nematic phase and smectic A phase on cooling. The results indicated that PD was able to induce the chiral nematic phase, nevertheless, the rigidity of the mesogenic arm, the flexibility of the terminal group and even the type of the terminal chemical bond played an important effect on the thermal properties of the dimers, and even on the formation of the chiral nematic phase. It is also worth noting that C=C at the terminal helped to stabilise the LC phase.     

Liquid crystal-based sensors for the detection of heavy metals using surface-immobilized urease

In this study, a new method for the detection of heavy metals in aqueous phase was developed using liquid crystals (LCs). When UV-treated nematic LC, 4-cyano-4'-pentyl biphenyl (5CB) that was confined in the urease-modified gold grid was immersed in a urea solution, an optical response from bright to dark was observed under a polarized microscope, indicating that a planar-to-homeotropic orientational transition of the LC occurred at the aqueous/LC interface. Since urease hydrolyzes urea to produce ammonia, which would be ionized into ammonium and hydroxide ions, the main product of the photochemically degraded 5CB, 4-cyano-4'-biphenylcarboxylic acid (CBA), was deprotonated and self-assembled at the interface, inducing the orientational transition in the LC. Due to the high sensitivity and rapid response of this system, detection of heavy metal ions was further exploited. The divalent copper ion, which could effectively inhibit the activity of urease, was used as a model heavy metal ion. The optical appearance of the LC did not change when urea was in contact with the copper nitrate hydrate-blocked urease. After the copper-inhibited urease was reactivated by EDTA, a bright-to-dark shift in the optical signal was regenerated, indicating an orientational transition of the LC. This type of LC-based sensor shows high spatial resolution due to its optical characteristics and therefore could potentially be used to accurately monitor the presence of enzyme inhibitors such as heavy metal ions in real-time.     

Preliminary Study on Cataractous Human Lenses Using Near-Infrared Fourier Transform Raman Spectroscopy

Raman vibrations of the fingerprint of aromatic amino acid residues were analyzed to study the changes of cataractous lens protein in the cortex and nucleus at various ages. Tryptophan content, analyzed by the quantification of I₇₅₈/I₁₄₄₈ ratio, shows the damage (modification) of tryptophan residue in the nucleus is caused primarily by the formation of cataracts, not by the aging process. Microenvironmental changes of tryptophan and tyrosine were analyzed by the intensity ratios of I₈₇₉/I₇₅₈ and I₈₂₉/I₈₅₃, respectively. The decrease of the ratio of I₈₇₉/I₇₅₈, from 0.9 to 0.6 in the nucleus and from 0.7 to 0.6 for the cortex, reveal that more buried tryptophan residues become exposed in the cortex than in the nucleus during cataractogenesis, especially for non-senile cataractous lenses. The ratio of I₈₂₉/I₈₅₃ is around 1.0 for both cortical and nuclear proteins at various ages, indicating some tyrosine residues have undergone a change in their hydrogen bonding environment. When compared to previous studies, we found that a normal (clear) lens has a higher peak at 1617 cm^?1 than at 1604 cm^?1, while a dense opaque or brunescent lens shows stronger intensity at 1604 cm^?1 than at 1617 cm^?1, suggesting the ratio of I₁₆₁₇/I₁₆₀₄ can be used to evaluate the human lens morphology.