Synthesis and micellization of thermoresponsive galactose‐based diblock copolymers

Thermoresponsive double hydrophilic diblock copolymers poly(2‐(2′‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol) methacrylate)‐b‐poly(6‐O‐methacryloyl‐D ‐galactopyranose) (P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP) with various compositions and molecular weights were obtained by deprotection of amphiphilic diblock copolymers P(MEO₂MA‐co‐OEGMA)‐b‐poly(6‐O‐methacryloyl‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose) (P(MEO₂MA‐co‐OEGMA)‐b‐PMAlpGP), which were prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization using P(MEO₂MA‐co‐OEGMA) as macro‐RAFT agent. Dynamic light scattering and UV–vis studies showed that the micelles self‐assembled from P(MEO₂MA‐co‐OEGMA)‐b‐PMAlpGP were thermoresponsive. A hydrophobic dye Nile Red could be encapsulated by block copolymers P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP upon micellization and released upon dissociation of the formed micelles under different temperatures. The galactose functional groups in the PMAGP block have specific interaction with HepG2 cells, and P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP has potential applications in hepatoma‐targeting drug delivery and biodetection. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Evaluation and Prediction on the Effect of Ionic Properties of Solvent Extraction Performance of Oily Sludge Using Machine Learning

Oily sludge produced in the process of petroleum exploitation and utilization is a kind of hazardous waste that needs to be urgently dealt with in the petrochemical industry. The oil content of oily sludge is generally between 15–50% and has a great potential for oil resource utilization. However, its composition is complex, in which asphaltene is of high viscosity and difficult to separate. In this study, The oily sludge was extracted with toluene as solvent, supplemented by three kinds of ionic liquids (1-ethyl-3-methylimidazole tetrafluoroborate ([EMIM] [BF₄]), 1-ethyl-3-methylimidazole trifluoro-acetate ([EMIM] [TA]), 1-ethyl-3-methylimidazole Dicyandiamide ([EMIM] [N(CN)₂])) and three kinds of deep eutectic solutions (choline chloride/urea (ChCl/U), choline chloride / ethylene glycol (ChCl/EG), and choline chloride/malonic acid (ChCl/MA)). This experiment investigates the effect of physicochemical properties of the solvents on oil recovery and three machine learning methods (ridge regression, multilayer perceptron, and support vector regression) are used to predict the association between them. Depending on the linear correlation of variables, it is found that the conductivity of ionic liquid is the key characteristic affecting the extraction treatment in this system.     

Simultaneous crosslinking and cationization of cotton cellulose by using dialdehyde and choline chloride: comparison between the pad-dry-cure and microwave irradiation process

Simultaneous crosslinking and cationization of cotton cellulose were carried out by using two dialdehydes, glyoxal (GO) and glutaraldehyde (GA), along with choline chloride (ChCl). Two heating methods, conventional pad-dry-cure (PDC) and microwave irradiation, were investigated and compared. The results revealed that two aldehyde molecules reacted very differently in the presence of ChCl under two different heating methods. GO reacted predominantly with the cellulose molecule, stimulating the crosslinking reaction and consequently resulting in high wrinkle recovery angle (WRA) values regardless of the heating process. Contrarily, GA favored the reaction with ChCl, allowing high K/S values with acid dye under microwave irradiation. The crosslinked and cationized cotton cellulose was only obtained by treatment with GA and ChCl under the PDC process, resulting in high WRA and K/S values. Characteristics of the treated fabrics were also evaluated by Fourier transform infrared analysis, thermogravimetric analysis, scanning electron microscopy, water of imbibition, and tensile strength test. Additionally, the treatments with GA and ChCl also provided high antimicrobial properties of the cotton celluloses; thereby most bacteria reductions of the specimens were close or equal to 99.9 %. Therefore, economically viable yet ecofriendly crosslinking and cationization of cotton cellulose could be made by treatment with GA and ChCl.     

Dielectric and Viscoelastic Behavior of Poly-(n-Butyl Methacrylate) Containing Cholesteric Compounds

Dielectric and dynamic mechanical behavior of poly(n-butyl methacrylate) (PBMA) containing small concentrations of cholesteryl chloride (ChCl), cholesteryl caprylate (ChCp), and cholesteryl laurate (ChL) have been studied in the temperature range -20 to 80°C. Tan αmax (dielectric and mechanical) in all systems containing an additive shifts to lower temperature compared to that in pure PBMA. In the glassy region, the dynamic storage modulus E′ for all the PBMA plus additive systems is higher than that for pure PBMA. This behavior is similar to the β-peak suppression and the increase in tensile strength of poly(vinyl chloride) on addition of a small concentration of plasticizer. Using the WLF equation with C₁ and C₂ obtained from the data on pure PBMA, the reference temperature T_o for PBMA plus additive systems are determined for the best fit of the experimental points to the WLF curve and are in agreement with measured glass-transition temperatures. With respect to T_o of pure PBMA, the T_o of PBMA plus additive systems are lowered, and the lowering due to these additives is in the order ChL < ChCp < ChCl. From spectrophotometric studies in solutions of polymer plus additives, equilibrium constants for the 1:1 and 1:2 complexes between the polymer and the additive are evaluated. The magnitude of the equilibrium constant K₁ increases in the order ChL > ChCp > ChCl, and hence it is concluded that the extent of β-peak suppression depends on the strength of polymer-additive interaction.     

Spectral,morphological, and antibacterial studies of conducting copolymers,Ppy‐MA,and their nanocomposites,Ag@Ppy‐MA

Pyrrole and methyl anthranilate were copolymerized in different molar ratios in the presence of, H₂O₂, and FeSO₄ at ambient temperature and pressure to obtain efficient conducting copolymers, Ppy‐MA. These conducting copolymers, Ppy‐MA, were in situ reacted with silver nanoparticles to generate nanocomposites, Ag@Ppy‐MA, which exhibit enhanced electrical conductivity. The spectra and morphology of different copolymers, Ppy‐MA, and their nanocomposites, Ag@Ppy‐MA, were analyzed using Fourier transform infrared, SEM, tunneling electron microscopy, X‐ray diffraction, thermogravimetric analysis, and differential thermal analysis. These studies have shown that the nanocomposites, Ag@Ppy‐MA, are thermally more stable and good electrical conductors as compared with their copolymers, Ppy‐MA. The antibacterial activity of the copolymers, Ppy‐MA, prepared from different monomer ratios and their nanocomposites, Ag@Ppy‐MA, has been carried out using disk diffusion method. The copolymers, Ppy‐MA, and its nanocomposites, Ag@Ppy‐MA, were screened against the standard drug Ciprofloxacin. The results clearly suggest that the nanocomposites, Ag@Ppy‐MA, are better antibacterial agent as compared with their copolymers, Ppy‐MA. Copyright © 2016 John Wiley & Sons, Ltd.     

Iron‐catalyzed living radical polymerization of acrylates: Iodide‐based initiating systems and block and random copolymerizations

A half‐metallocene iron iodide complex [Fe(Cp)I(CO)₂] induced living radical polymerization of methyl acrylate (MA) in conjunction with an iodide initiator [(CH₃)₂C(CO₂Et)I, 1 ] and Al(Oi‐Pr)₃ to give polymers of controlled molecular weights and narrow molecular weight distributions (MWDs) (M_w/M_n < 1.2). With the use of chloride and bromide initiators, the MWDs were broader, whereas the molecular weights were similarly controlled. Other acrylates such as n‐butyl acrylate (nBA) and tert‐butyl acrylate (tBA) can be polymerized with 1 /Fe(Cp)I(CO)₂ in the presence of Ti(Oi‐Pr)₄ and Al(Oi‐Pr)₃, respectively, to give living polymers. The 1 /Fe(Cp)I(CO)₂ initiating system is applicable for the synthesis of block and random copolymers of acrylates (MA, nBA, and tBA) and styrene of controlled molecular weights and narrow MWDs (M_w/M_n = 1.2–1.3). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2033–2043, 2002     

The kinetics of radical copolymerization of acrylonitrile and methylacrylate with tricaprylylmethylammonium chloride as a phase-transfer catalyst

The phase-transfer radical copolymerization of acrylonitrile (AN) and methylacrylate (MA) with tricaprylylmethylammonium chloride was investigated in Na₂S₂O₈ aqueous-organic two-phase system at 25°C and under nitrogen atmosphere. The rate of copolymerization was expressed as the combined terms of quaternary ammonium ion and peroxydisulfate ion in the aqueous phase rather than the fed concentrations of catalyst and Na₂S₂O₈. The observed initial rate of copolymerization was used to analyze the copolymerization mechanism with a cyclic phase-transfer initiation step in the heterogeneous liquid–liquid system. The monomer reactivity ratio r₁ and r₂ obtained from the analysis of copolymerization mechanism were 1.584 and 0.856, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3504–3512, 1999     

Nanoporous Crosslinked Copolymers Prepared by Thermal Degradation of Poly(Methacryl‐N,N′‐diisopropylurea‐co‐ethylene Glycol Dimethacrylate)

Abstract

Copolymers of methacryl‐N,N′‐diisopropylurea (MA‐DiPrU) with ethylene glycol dimethacrylate (EDMA) at monomer‐to‐monomer ratios in the feed: 0.3/0.7; 0.5/0.5; 0.7/0.3; 0.8/0.2 were prepared in butanone in the presence of 2% of dibenzoyl peroxide (Bz₂O₂) at 70°C for 48?hr. Copolymers regardless of the ratio of comonomers in the feed decompose thermally at 200–250°C under the separation of isopropylisocyanate (iPrNCO). Residues after the removal of iPrNCO are thermally stable nanoporous crosslinked copolymers of methacryl‐isopropylamide (MA‐iPrA) with EDMA which decompose by a one‐step mechanism between 280°C and 450°C. Nonporous model copolymers poly(MA‐iPrA‐co‐EDMA) of similar composition, prepared by copolymerization of MA‐iPrA with EDMA, also decomposed by a one‐step mechanism as shown by TGA measurements.     

Impact‐specific essential work of fracture of maleic anhydride‐compatibilized polypropylene/elastomer blends and their composites

Charpy drop‐weight‐impact and essential work of fracture (EWF) characteristics of maleic anhydride (MA)‐compatibilized styrene–ethylene butylene–styrene (SEBS)/polypropylene (PP) blends and their composites reinforced with short glass fibers (SGFs) were investigated. MA was grafted to either SEBS copolymer (SEBS‐g‐MA) or PP (PP‐g‐MA). The mPP blend was prepared by the compounding of 95% PP and 5% PP‐g‐MA. Drop‐weight‐impact results revealed that the mPP specimen had an extremely low impact strength. The incorporation of SEBS or SEBS‐g‐MA elastomers into mPP improved its impact strength dramatically. Similarly, the addition of SEBS was beneficial for enhancing the impact strength of the SGF/SEBS/mPP and SGF/SEBS‐g‐MA/mPP hybrids. A scanning electron microscopy examination of the fractured surfaces of impact specimens revealed that the glass‐fiber surfaces of the SGF/SEBS/mPP and SGF/SEBS‐g‐MA/mPP hybrids were sheathed completely with deformed matrix material. This was due to strong interfacial bonding between the phase components of the hybrids associated with the MA addition. Impact EWF tests were carried out on single‐edge‐notched‐bending specimens at 3 m s^?1. The results showed that pure PP, mPP, and the composites only exhibited specific essential work. The nonessential work was absent in these specimens under a high‐impact‐rate loading condition. The addition of SEBS or SEBS‐g‐MA elastomer to mPP increased both the specific essential and nonessential work of fracture. This implied that elastomer particles contributed to the dissipation of energy at the fracture surface and in the outer plastic zone at a high impact speed of 3 m s^?1. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1881–1892, 2002     

A Comprehensive Study of CO2 Absorption and Desorption by Choline-Chloride/Levulinic-Acid-Based Deep Eutectic Solvents

Amine absorption (or amine scrubbing) is currently the most established method for CO₂ capture; however, it has environmental shortcomings and is energy-intensive. Deep eutectic solvents (DESs) are an interesting alternative to conventional amines. Due to their biodegradability, lower toxicity and lower prices, DESs are considered to be “more benign” absorbents for CO₂ capture than ionic liquids. In this work, the CO₂ absorption capacity of choline-chloride/levulinic-acid-based (ChCl:LvAc) DESs was measured at different temperatures, pressures and stirring speeds using a vapour–liquid equilibrium rig. DES regeneration was performed using a heat treatment method. The DES compositions studied had ChCl:LvAc molar ratios of 1:2 and 1:3 and water contents of 0, 2.5 and 5 mol%. The experimental results showed that the CO₂ absorption capacity of the ChCl:LvAc DESs is strongly affected by the operating pressure and stirring speed, moderately affected by the temperature and minimally affected by the hydrogen bond acceptor (HBA):hydrogen bond donator (HBD) molar ratio as well as water content. Thermodynamic properties for CO₂ absorption were calculated from the experimental data. The regeneration of the DESs was performed at different temperatures, with the optimal regeneration temperature estimated to be 80 °C. The DESs exhibited good recyclability and moderate CO₂/N₂ selectivity.     

Mn2(CO)10‐induced controlled/living radical copolymerization of vinyl acetate and methyl acrylate: Spontaneous formation of block copolymers consisting of gradient and homopolymer segments

The controlled/living radical polymerization of vinyl acetate (VAc) and its copolymerization with methyl acrylate (MA) were investigated in bulk or fluoroalcohols using manganese complex [Mn₂(CO)₁₀] in conjunction with an alkyl iodide (R? I) as an initiator under weak visible light. The manganese complex induced the controlled/living radical polymerization of VAc even in the fluoroalcohols without any loss of activity. The R? I/Mn₂(CO)₁₀ system was also effective for the copolymerization of MA and VAc, in which MA was consumed faster than VAc, and then the remaining VAc was continuously and quantitatively consumed after the complete consumption of MA. The ¹H and ¹³C NMR analyses revealed that the obtained products are block copolymers consisting of gradient MA/VAc segments, in which the VAc content gradually increases, and homopoly(VAc). The use of fluoroalcohols as solvents increased the copolymerization rate, controllability of the molecular weights, and copolymerizability of VAc. The saponification of the VAc units in poly(MA‐grad‐VAc)‐block‐poly(VAc) resulted in the corresponding poly(MA‐co‐γ‐lactone)‐block‐poly(vinyl alcohol) due to the intramolecular cyclization between the hydroxyl and neighboring carboxyl groups in the gradient segments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1343–1353, 2009     

Charge transfer complex formation in in-situ maleic anhydride and N-vinyl caprolactam copolymer and copolymer/organo-montmorillonite nanoarchitectures

The binary copolymerization of maleic anhydride (MA) and N-vinyl caprolactam (VCL) or considered as acceptor (A)?donor (D) monomer systems were used (MA:VCL) 50:50 in BPO (0.5%) as an initiator at 70°C under nitrogen atmosphere. The functional copolymers, having a combination of rigid/flexible linkages and an ability of complex-formation with interlayered surface of organo-silicate, and their nanocomposites have been synthesized. Interlamellar in situ complex-radical copolymerization of intercalated monomer complexes of MA and VCL undergoes with stearyl amine surface modified montmorillonite (O-MMT) and monomer mixtures. Charge transfer complex formation was followed and identified by UV-Vis-NIR spectroscopy. Equilibrium constant (K_AD) molar absorption coefficient (?^AD)) of the complex were determined by the Benesi-Hildebrand, Scott and Ketaalar equations respectively. The results show that copolymerization of MA:VCL system was preceded via alternating copolymerization mechanism. Obtained functional alternating copolymer and copolymer/O-MMT nanostructures were characterized by XRD and TEM.     

Effect of PPO‐g‐MA on structures and properties of PPO/PA6/short glass fiber composites

Poly(2,6‐dimethyl‐1,4‐phenylene oxide)/polyamide 6 (PPO/PA6) blends were reactively compatibilized by maleic anhydride (MA) grafted PPO (PPO‐g‐MA) and reinforced by short glass fibers (SGF) via melt extrusion. An observation of the SGF‐polymer interface by scanning electronic microscope (SEM) together with etching techniques indicated that the PPO‐g‐MA played a decisive role in the adhesion of polymers to SGF. The rheological behavior was investigated by capillary rheometer, and the addition of PPO‐g‐MA, and SGF could increase the viscosity of the PPO/PA6 blends. The analysis of fiber orientation and distribution in the PPO/PA6/SGF composites showed PPO‐g‐MA favored to the random dispersion of SGF. The statistic analysis of SGF length showed that PPO‐g‐MA was helpful to maintain the fiber length during melt‐processing. For the composites at a given SGF content of 30 wt %, the addition of PPO‐g‐MA increased the tensile strength from 59.4 MPa to 97.1 MPa and increased SGF efficiency factor from 0.028 to 0.132. The experimental data were consistent with the theoretical predictions of the extension of Kelly‐Tyson model for tensile strength. The fracture toughness of the composites was investigated by single edge notch three‐point bending test. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2188–2197, 2009     

Synthesis and reactions of a poly(methacrylate) from an optically active amino alcohol

Synthesis and radical polymerization of a novel optically active methacrylate, (S)–2–tert–butoxycarbonylamino–3–phenylpropyl methacrylate (MA–F–BOC), were examined. MA–F–BOC was synthesized from methacrylic acid and N–protected (L)–phenylalaninol. Radical polymerization of MA–F–BOC quantitatively afforded the corresponding polymethacrylate with a relatively high molecular weight. Radical copolymerizations of MA–F–BOC were carried out with styrene and acrylamide to afford the copolymers. Radical polymerization of MA–F–BOC in the presence of n–butanethiol afforded the oligomers, whose degrees of polymerizations were 3.3–8.0. The BOC group was completely cloven with HBr to afford the corresponding optically active polymeric amine quantitatively. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 1981–1986, 1998     

Structural and mechanical behavior of polypropylene/ maleated styrene‐(ethylene‐co‐butylene)‐styrene/sisal fiber composites prepared by injection molding

Hybrid composites consisting of isotactic poly(propylene) (PP), sisal fiber (SF), and maleic anhydride grafted styrene‐(ethylene‐co‐butylene)‐styrene copolymer (MA‐SEBS) were prepared by melt compounding, followed by injection molding. The melt‐compounding torque behavior, thermal properties, morphology, crystal structure, and mechanical behavior of the PP/MA‐SEBS/SF composites were systematically investigated. The torque test, thermogravimetric analysis, differential scanning calorimetric, and scanning electron microscopic results all indicated that MA‐SEBS was an effective compatibilizer for the PP/SF composites, and there was a synergism between MA‐SEBS and PP/SF in the thermal stability of the PP/MA‐SEBS/SF composites. Wide‐angle X‐ray diffraction analysis indicated that the α form and β form of the PP crystals coexisted in the PP/MA‐SEBS/SF composites. With the incorporation of MA‐SEBS, the relative amount of β‐form PP crystals decreased significantly. Mechanical tests showed that the tensile strength and impact toughness of the PP/SF composites were generally improved by the incorporation of MA‐SEBS. The instrumented drop‐weight dart‐impact test was also used to examine the impact‐fracture behavior of these composites. The results revealed that the maximum impact force (F_max), impact‐fracture energy (E_T), total impact duration (t_r), crack‐initiation time (t_init), and crack‐propagation time (t_prop) of the composites all tended to increase with an increasing MA‐SEBS content. From these results, the incorporation of MA‐SEBS into PP/SF composites can retard both the crack initiation and propagation phases of the impact‐fracture process. These prolonged the crack initiation and propagation time and increased the energy consumption during impact fracture, thereby leading to toughening of PP/MA‐SEBS/SF composites. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1214–1222, 2002     

Synthesis and properties of poly(isobutyl methacrylate‐co‐butanediol dimethacrylate‐co‐methacryl polyhedral oligomeric silsesquioxane) nanocomposites

Poly[isobutyl methacrylate‐co‐butanediol dimethacrylate‐co‐3‐methacrylylpropylheptaisobutyl‐T8‐polyhedral oligomeric silsesquioxane] [P(iBMA‐co‐BDMA‐co‐MA‐POSS)] nanocomposites with different crosslink densities and different polyhedral oligomeric silsesquioxane (MA‐POSS) percentages (5, 10, 15, 20, and 30 wt %) were synthesized by radical‐initiated terpolymerization. Linear [P(iBMA‐co‐MA‐POSS)] copolymers were also prepared. The viscoelastic properties and morphologies were studied by dynamic mechanical thermal analysis, confocal microscopy, and transmission electron microscopy (TEM). The viscoelastic properties depended on the crosslink density. The dependence of viscoelastic properties on MA‐POSS content at a low BDMA loading (1 wt %) was similar to that of linear P(iBMA‐co‐MA‐POSS) copolymers. P(iBMA‐co‐1 wt % BDMA‐co‐10 wt % MA‐POSS) exhibited the highest dynamic storage modulus (E′) values in the rubbery region of this series. The 30 wt % MA‐POSS nanocomposites with 1 wt % BDMA exhibited the lowest E′. However, the E′ values in the rubbery region for P(iBMA‐co‐3 wt % BDMA‐co‐MA‐POSS) nanocomposites with 15 and 30 wt % MA‐POSS were higher than those of the parent P(iBMA‐co‐3 wt % BDMA) resin. MA‐POSS raised the E′ values of all P(iBMA‐co‐ 5 wt % BDMA‐co‐MA‐POSS) nanocomposites in the rubbery region above those of P(iBMA‐co‐5 wt % BDMA), but MA‐POSS loadings < 15 wt % had little influence on glass‐transition temperatures (T_g's) and slightly reduced T_g values with 20 or 30 wt % POSS. Heating history had little influence on viscoelastic properties. No POSS aggregates were observed for the P(iBMA‐co‐1 wt % BDMA‐co‐MA‐POSS) nanocomposites by TEM. POSS‐rich particles with diameters of several micrometers were present in the nanocomposites with 3 or 5 wt % BDMA. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 355–372, 2005     

Bis(β‐ketoamino)copper(II)/methylaluminoxane systems for homo‐ and copolymerizations of methyl acrylate and 1‐hexene

Two bis(β‐ketoamino)copper [ArNC(CH₃)CHC(CH₃)O]₂Cu ( 1 , Ar = 2,6‐dimethylphenyl; 2 , Ar = 2,6‐diisopropylphenyl) complexes were synthesized and characterized. Homo‐ and copolymerizations of methyl acrylate (MA) and 1‐hexene with bis(β‐ketoamino)copper(II) complexes activated with methylaluminoxane (MAO) were investigated in detail. MA was polymerized in high conversion (>72%) to produce the syndio‐rich atactic poly(methyl acrylate), but 1‐hexene was not polymerized with copper complexes/MAO. Copolymerizations of MA and 1‐hexene with 1 , 2 /MAO produced acrylate‐enriched copolymers (MA > 80%) with isolated hexenes in the backbone. The calculation of reactivity ratios showed that r(MA) is 8.47 and r(hexene) is near to 0 determined by a Fineman‐Ross method. The polymerization mechanism was discussed, and an insertion‐triggered radical mechanism was also proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1113–1121, 2010     

Grafting of polymer matrix to exfoliated montmorillonite nanoplatelets in nanocomposite film cast from soap‐free emulsion polymerized latex and its fortified mechanical properties

Poly(methyl acrylate‐co‐methyl methacrylate) [P(MA‐co‐MMA)] nanocomposite film containing 1 wt % of montmorillonite (MMT) exhibited unusual higher ductility, higher strain recovery ratio after creep, and higher modulus and strength compared to neat P(MA‐co‐MMA) as they were cast from their individual latices fabricated by soap‐free emulsion polymerization. The fortified mechanical properties were attributed to the MgO components of exfoliated MMT nanoplatelets being grafted by P(MA‐co‐MMA) chains as verified by FTIR and XPS spectroscopies, which to the best of our knowledge is the first time in the literature providing the direct evidence for the polymer chains grafting onto the exfoliated MMT. TEM investigation of the stretched nanocomposite film revealed that the microcracks in the nanocomposite film appeared mainly in the bulk region of polymer matrix, implying that the interfacial strength between P(MA‐co‐MMA) and its grafted MMT nanoplatelets was higher than the cohesion strength of P(MA‐co‐MMA). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5891–5897, 2009     

氯化胆碱/尿素和氯化胆碱/甘油的性质与应用

作为绿色溶剂,离子液体在化学和物理学科引起广泛关注.低共融溶剂,如氯化胆碱/尿素和氯化胆碱/甘油,不仅被认为是一类新型的离子液体,还具有价格低廉、环境友好及合成简便等优势.为了促进氯化胆碱/尿素和氯化胆碱/甘油这两种低共融溶剂的应用,本文考察了氯化胆碱/尿素和氯化胆碱/甘油的微观结构、物理化学性质及水分对其物性的影响,并将其与传统离子液体进行了比较.此外,还分析了氯化胆碱/尿素和氯化胆碱/甘油在摩擦学及CO2分离中的潜在应用.已有研究结果表明,氯化胆碱/尿素和氯化胆碱/甘油有希望应用于摩擦学及CO2分离中,但是在大规模工业应用之前依然存在很多不确定性和瓶颈,还需要进一步在其纳米结构、实验测定及模型等方面进行研究.     

Effects of functionalized multiwalled carbon nanotubes on the morphologies and mechanical properties of PP/EVA blend

The maleic anhydride‐grafted multiwalled carbon nanotubes (MWCNTs‐g‐MA) have been introduced into polypropylene/ethylene‐co‐vinyl acetate (PP/EVA) blend. To clearly describe the effects of MWCNTs‐g‐MA on the morphology and mechanical properties of PP/EVA blends, the selective distribution of MWCNTs‐g‐MA in the blends is realized through different sample preparation methods, namely, MWCNTs‐g‐MA disperse in EVA phase and MWCNTs‐g‐MA disperse in PP matrix. The results show that the distribution of MWCNTs‐g‐MA has an important effect on the final morphology of EVA and the crystallization structure of PP matrix. Compared with PP/EVA binary blend, distribution of MWCNTs‐g‐MA in PP matrix induces the aggregation of EVA phase at high EVA content and the decrease of spherulite diameters of PP matrix simultaneously. However, when MWCNTs‐g‐MA are dispersed in the EVA phase, they induce more homogeneous distribution of EVA, and the crystallization behavior of PP is slightly affected by MWCNTs‐g‐MA. The corresponding mechanical properties including impact strength and tensile strength are tested and analyzed in the work. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1481–1491, 2009