A rapid and sensitive UPLC–MS/MS method for the determination of zanubrutinib in beagle plasma and its application in pharmacokinetics

A reliable and sensitive ultra-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) method was developed for the determination of zanubrutinib in the plasma of beagle dogs. The column used was an Acquity BEH C₁₈ column (2.1 mm × 50 mm, 1.7 μm), maintained at 40°C with an injection volume of 2 μl. The gradient elution program was as follows: 0–1 min, 10–10% A; 1–1.1 min, 10–90% A; 1.1–2.1 min, 90–90% A; 2.1–2.2 min, 90–10% A; 2.2–3.0 min, 10–10% A. Mobile phase A was 0.1% formic acid, B was acetonitrile, and the total analysis time was 3 min. The mass spectrometry was performed in positive ion mode, and the scanning mode was multi-reaction monitoring mode with electrospray ionization as the ion source; m/z 472.2 → 455.01 for zanubrutinib and m/z 441.03 → 137.99 for ibrutinib (internal standard). The plasma samples were processed by protein precipitation. The standard curve showed good linearity (r² = 0.999 8) in the range of 1.0–1,000 ng/ml (zanubrutinib) with a low limit of quantification of 1 ng/ml. Also, the intra-day and inter-day precision (RSD) was <5.88% and the accuracy (RE) ranged from −1.56 to 1.08%; the recoveries of zanubrutinib in beagle plasma ranged from 90.12 to 93.53% (RSD 1.67–6.42%) and the ME values of zanubrutinib were 98.70–101.06% (RSD 5.37–8.49%, n = 6). All values meet US Food and Drug Administration requirements. A rapid, highly selective and sensitive method for the determination of zanubrutinib concentration in plasma by UPLC–MS/MS was successfully developed. This method is suitable for pharmacokinetic studies in beagle dogs by following oral administration of zanubrutinib.     

Development and validation of a rapid and sensitive LC–MS/MS method for the determination of polyphyllin II in rat plasma and its application in a pharmacokinetic study

Polyphyllin II, a major steroidal saponin isolated from Paris polyphylla, exhibits significant pharmacological activities. In this study, a rapid and sensitive liquid chromatography–tandem mass spectrometry method was established and validated for the determination of polyphyllin II in plasma. Polyphyllin II and polyphyllin VII (internal standard) were separated on a Waters Acquity™ HSS T3 column and the mass analysis was performed in a triple quadrupole mass spectrometer equipped with an electrospray ionization ion source. Results showed that the method was sensitive (lower limit of quantitation 0.5 ng/ml), precise (<15%) and linear in the range of 0.5–500 ng/ml (r > 0.99). Interestingly, the sensitivity in current study was ~10 times higher than that in the previous study. The results of the pharmacokinetic study of polyphyllin II in rats suggested that polyphyllin II was poorly absorbed into blood and reached its highest concentration at ~3.67–5.00 h with a slow elimination half-life of 8.34–13.37 h. The bioavailability was 6.1–8.2%. The results indicated that the absorption of polyphyllin II may primarily occur via passive diffusion in rats. This study provides valuable information that can be used as a reference for the pharmacokinetic investigation of other steroidal saponins.     

Surface engineering of carbon dots for highly sensitive α-glucosidase assay and inhibition evaluation

Monitoring α-glucosidase(α-Glu) activity is of great significance for the early diagnosis of type Ⅱ diabetes. Here the blue fluorescent carbon dots(CDs) were integrated with two different recognizing molecules, β-cyclodextrin and phenylboronic acid, for assembling a multifunctional CDs(mCDs) nanoplatform for sensitively analyzing α-Glu and its inhibitors. The hydrolyzed product of 4-nitrophenyl-α-D-glucopyranoside(α-Glu substrate), p-nitrophenol, could efficiently quench the fluorescence of mCDs...     

A rapid and sensitive GC–MS method for determination of 1,3-dichloro-2-propanol in water

A rapid analytical method for sensitive determination of 1,3-dichloro-2-propanol (1,3-DCP) in river water has been developed. 1,3-DCP is extracted from water with ethyl acetate. After filtration through sodium sulfate the ethyl acetate phase is analyzed by gas chromatography–mass spectrometry. The method uses 1,3-DCP-d₅ as internal standard. Different extraction solvents, concentrations of ammonium sulfate in the water samples, and the effect of humic acid were tested and their influence on the recovery of DCP has been evaluated. The method quantification limit was 0.1 g L^–1. For spiked water samples (0–5.2 g L^–1, n=21) a repeatability coefficient of variation of 5.4% was obtained. The average recovery rate of 1,3-DCP was 105±3% (n=21). Stability tests, which were carried out with Danube river water, led to an estimated 1,3-DCP degradation rate of 0.008±0.0008 day^–1 at 6°C.     

Semiconductor-driven “turn-off” surface-enhanced Raman scattering spectroscopy: application in selective determination of chromium(vi) in water

Semiconductor materials have been successfully used as surface-enhanced Raman scattering (SERS)-active substrates, providing SERS technology with a high flexibility for application in a diverse range of fields. Here, we employ a dye-sensitized semiconductor system combined with semiconductor-enhanced Raman spectroscopy to detect metal ions, using an approach based on the “turn-off” SERS strategy that takes advantage of the intrinsic capacity of the semiconductor to catalyze the degradation of a Raman probe. Alizarin red S (ARS)-sensitized colloidal TiO₂ nanoparticles (NPs) were selected as an example to show how semiconductor-enhanced Raman spectroscopy enables the determination of Cr(vi) in water. Firstly, we explored the SERS mechanism of ARS–TiO₂ complexes and found that the strong electronic coupling between ARS and colloidal TiO₂ NPs gives rise to the formation of a ligand-to-metal charge-transfer (LMCT) transition, providing a new electronic transition pathway for the Raman process. Secondly, colloidal TiO₂ nanoparticles were used as active sites to induce the self-degradation of the Raman probe adsorbed on their surfaces in the presence of Cr(vi). Our data demonstrate the potential of ARS–TiO₂ complexes as a SERS-active sensing platform for Cr(vi) in an aqueous solution. Remarkably, the method proposed in this contribution is relatively simple, without requiring complex pretreatment and complicated instruments, but provides high sensitivity and excellent selectivity in a high-throughput fashion. Finally, the ARS–TiO₂ complexes are successfully applied to the detection of Cr(vi) in environmental samples. Thus, the present work provides a facile method for the detection of Cr(vi) in aqueous solutions and a viable application for semiconductor-enhanced Raman spectroscopy based on the chemical enhancement they contribute.     

Mechanism study on inorganic oxidants induced inhibition of Ru(bpy)₃²+ electrochemiluminescence and its application for sensitive determination of some inorganic oxidants

Inhibited Ru(bpy)₃²⁺ electrochemiluminescence by inorganic oxidants is investigated. Results showed that a number of inorganic oxidants can quench the ECL of Ru(bpy)₃²⁺/tri-n-propylamine (TPrA) system, and the logarithm of the decrease in ECL intensity (ΔI) was proportional to the logarithm of analyte concentrations. Based on which, a sensitive approach for detection of these inorganic oxidants was established, e.g. the log-log plots of ΔI versus the concentration of MnO₄⁻, Cr₂O₇²⁻ and Fe(CN)₆³⁻ are linear in the range of 1 × 10⁻⁷ to 3 × 10⁻⁴ M for MnO₄⁻ and Cr₂O₇²⁻, and 1 × 10⁻⁷ to 1 × 10⁻⁴ M for Fe(CN)₆³⁻, with the limit of detection (LOD) of 8.0 × 10⁻⁸ M, 2 × 10⁻⁸ M, and 1 × 10⁻⁸ M, respectively. A series of experiments such as a comparison of the inhibitory effect of different compounds on Ru(bpy)₃²⁺/TPrA ECL, ECL emission spectra, UV-Vis absorption spectra etc. were investigated in order to discover how these inorganic analytes quench the ECL of Ru(bpy)₃²⁺/TPrA system. A mechanism based on consumption of TPrA intermediate (TPrA^·) by inorganic oxidants was proposed.     

A new BODIPY-based fluorescent “turn-on” probe for highly selective and rapid detection of mercury ions

A new fluorescent sensor based on the BODIPY fluorophore and the carboxyl-thiol metal bonding receptor for Hg²⁺ was designed and synthesized. The sensor is highly selective for Hg²⁺ (about 630-fold fluorescence enhancement) over relevant competing metal ions, sensitive to ppb levels of Hg²⁺ (with detection limit of 5.7?nM), and fast response toward Hg²⁺ (within 30?s) in aqueous solution.     

A highly sensitive chemiluminescence sensor for detecting mercury(Ⅱ) ions: a combination of Exonuclease Ⅲ-aided signal amplification and graphene oxide-assisted background reduction

In this paper, we report a highly sensitive chemiluminescence(CL) sensor for Hg2+ ions based on thymine-Hg2+-thymine(T-Hg2+-T) coordination chemistry. We designed a thymine rich oligonucleotide as a capture probe and a signal probe that includes two functional domains: a horseradish peroxidase-mimicking DNAzyme domain for the generation of CL, and a recognition domain. Graphene oxide(GO) was introduced to adsorb the signal probe via π-π interaction, which brought the DNAzyme domain and GO into close proximity and quenches CL. In the presence of Hg2+ ions, the coordination of Hg2+ with the capture probe yielded a hairpin complex, triggers cascaded strand displacement reactions and Exonuclease III-assisted signal amplifications. As a result, accumulated amounts of DNAzyme were generated and released from GO, leading to an enhanced CL signal. This strategy combines enzyme-based signal amplification and GO as a background reducer, leads to a limit of detection(LOD) of 2 nmol/L. This simple detection system provides a label-free yet sensitive approach for detection of Hg2+ ions.     

The application of Fourier-transform Raman spectroscopy to the determination of conformation in poly(ε-caprolactam) chains

The Fourier-transform Raman spectra of various structural forms of poly(ε-caprolactam) have been obtained and the Raman bands characterizing planar and nonplanar conformation of the ε-caprolactam units have been defined. These bands have been used for the investigation of the conformational composition of ε-caprolactam sequences in several ε-caprolactam-butadiene block copolymers.     

A rapid and sensitive assay for determining human brain levels of farnesyl-(FPP) and geranylgeranylpyrophosphate (GGPP) and transferase activities using UHPLC–MS/MS

The isoprenoids farnesyl-(FPP) and geranylgeranylpyrophosphate (FPP and GGPP) are two major lipid intermediates in the mevalonate pathway. They participate in post-translational modification of members of the superfamily of small guanosine triphosphatases (GTPases; Ras, Rab, Rac, etc.) via prenylation reactions. Due to the important role of these proteins in a number of cell processes, in particular cell growth, division, and differentiation, investigation of the involvement of isoprenoids in these processes is of great interest. In a previously published report, we described a fully validated assay for the quantitation of the two isoprenoids using a high-performance liquid chromatography (HPLC)–fluorescence detection (FLD) method. The current work expands on the previous method and enhances it greatly by using a much faster state-of-the-art ultrahigh-performance liquid chromatography (UHPLC) technique coupled to tandem mass spectrometry (MS/MS). The method exhibited a linear concentration range of 5–250 ng/mL for FPP and GGPP in human brain tissue; it was shown to be unaffected by ion suppression and provided results almost six times faster than the HPLC–FLD assay. Comparison of UHPLC–MS/MS and HPLC–FLD yielded excellent comparability of the two assays for both isoprenoids. Based on the UHPLC–MS/MS assay, a novel in vitro test system was implemented to study enzyme specificity for distinct amino acid CAAX motifs, which is potentially useful for investigating target interactions of new therapeutics for diseases involving pathological regulation of isoprenoids and/or small GTPases.     

A fluorescent Eu(Ⅲ) MOF for highly selective and sensitive sensing of picric acid

A metal-organic framework [Eu_3L_3(CH_3COO)_2(H_2O)_2(μ_3-OH)]·3 DMF,(EuL, H_2L=9H-carbazole-2,7-dicarboxylic acid,DMF=N,N-dimethylformamide) has been synthesized under solvothermal conditions and structurally characterized. In EuL,Eu_6O_8 clusters are four-bridged by carboxylates to form parallel-aligned Eu–O–C chains, which are further linked by the carbazole moieties of L~(2-) ligands to form the three-dimensional framework with rhombic channels. The EuL material with characteristic emission of Eu~(3+) ion exhibits significant luminescence quenching response for picric acid(PA) and the linear Stern-Volmer plot was observed in the concentration range of 0.05–0.15 mM with K_(sv) of 98074 M~(-1). As far as we know, this Ksv is among the highest values for COFs and MOFs in detection of PA. The excellent anti-interference ability and repeatability were also verified by experiments. Lastly, we investigated the luminescence quenching mechanism in the EuL sensing system.     

Ultrasound and surfactant-assisted dispersive liquid–liquid microextraction prior to poly(ethylene oxide)-mediated stacking in CE for highly sensitive determination of barbiturates in human fluids

This study developed a facile, highly sensitive technique for extracting and quantifying barbiturates in serum samples. This method combined ultrasound and surfactant-assisted dispersive liquid–liquid microextraction with poly(ethylene oxide)-mediated stacking in capillary electrophoresis. Factors influencing the extraction and stacking performance, such as the type and volume of extraction solvents, the type and concentration of surfactant, extraction time, salt additives, sample matrix, solution pH, and composition of the background electrolyte, were carefully studied and optimized to achieve the optimal detection sensitivity. Under the optimized extraction (injecting 140 μL C₂H₄Cl₂ into 1 mL of sample with pH 4 (5 mM sodium phosphate containing 0.05 mM Tween 20 and sonication for 1 min) and separation conditions (150 mM tris(hydroxymethyl)aminomethane-borate with pH 8.5 containing 0.5% (m/v) poly(ethylene oxide)), the limits of detection (signal-to-noise ratio = 3) of five barbiturates ranged from 0.20 to 0.33 ng/mL, and the calculated sensitivity improvement ranged from 868- to 1700-fold. The experimental results revealed excellent linearity (R² > 0.99), with relative standard deviations of 2.1%–3.4% for the migration time and 4.3%–5.7% for the peak area. The recoveries of the spiked serum samples were 97.1% –110.3%. Our proposed approach offers a rapid and practical method for quantifying barbiturates in biological fluids.     

A rapid and sensitive UPLC–MS/MS method for quantitative determination of arformoterol in rat plasma,lung and trachea tissues

A rapid and sensitive ultra-performance liquid chromatography-tandem mass spectrometry (UPLC–MS/MS) method was developed and fully validated for determination of arformoterol in rat plasma, lung and trachea tissues.     

A dried blood spot assay with HPLC–MS/MS for the determination of larotrectinib in mouse blood and its application to a pharmacokinetic study

Larotrectinib is a first-generation tropomyosin kinase inhibitor, approved for the treatment of solid tumors. In this paper, we present a validated dried blood spot (DBS) method for the quantitation of larotrectinib from mouse blood using HPLC–MS/MS, which was operated under multiple reaction monitoring mode. To the DBS disc cards, acidified methanol enriched with internal standard (IS; enasidenib) was added and extracted using tert-butyl methyl ether as an extraction solvent with sonication. Chromatographic separation of larotrectinib and the IS was achieved on an Atlantis dC₁₈ column using 10 mm ammonium formate–acetonitrile (30:70, v/v) delivered at a flow-rate of 0.80 ml/min. Under these optimized conditions, the retention times of larotrectinib and the IS were ~0.93 and 1.37 min, respectively. The total run time was 2.50 min. Larotrectinib and the IS were analyzed using positive ion scan mode and parent–daughter mass to charge ion (m/z) transitions of 429.1 → 342.1 and 474.1 → 267.1, respectively, were used for the quantitation. The calibration range was 1.06–5,080 ng/ml. No matrix effect or carryover was observed. Hematocrit did not influence DBS larotrectinib concentrations. All of the validation parameters met the acceptance criteria. The applicability of the validated method was shown in a mouse pharmacokinetic study.     

A highly sensitive and specific enzyme immunoassay for detection of β-amanitin in biological fluids

Polyclonal antisera to -amanitin were generated in sheep and used to construct a competitive ELISA for measurement of the toxin in human serum and urine. The assay had a detection limit of about 80 pg mL^–1, a dynamic range of 80–2,000 pg mL^–1, a cross reactivity of 22% with -amanitin, and no cross reactivities with cyclic peptides from algal sources. Assay responses in buffer, serum, and urine were remarkably similar. Coupling of the toxin to carrier proteins was carried out by previously unreported methods. The key step that allowed the construction of the highly sensitive assay was the introduction of a novel heterologous hapten derivative made of -amanitin-cyanuric chloride derivative. The new derivative overcame the problems of bridge binding that was, in this case, particularly serious with the homologous hapten derivative. The study demonstrated that the developed antiserum and ELISA procedure can be used to detect -amanitin and related toxins from Amanita phalloides in human serum and urine samples from suspected poison cases and enable early treatment to be administered.     

In situ formation of p–n junction: A novel principle for photoelectrochemical sensor and its application for mercury(II) ion detection

The discovery and development of photoelectrochemical sensors with novel principles are of great significance to realize sensitive and low-cost detection. In this paper, a new photoelectrochemial sensor based on the in situ formation of p–n junction was designed and used for the accurate determination of mercury(II) ions. Cysteine-capped ZnS quantum dots (QDs) was assembled on the surface of indium tin oxide (ITO) electrode based on the electrostatic interaction between Poly(diallyldimethylammonium chloride) (PDDA) and Cys-capped ZnS QDs. The in situ formation of HgS, a p-type semiconductor, on the surface of ZnS facilitated the charge carrier transport and promoted electron-hole separation, triggered an obviously enhanced anodic photocurrent of Cys-capped ZnS QDs. The formation of p–n junction was confirmed by P–N conductive type discriminator measurements and current–voltage (I–V) curves. The photoelectrochemical method was used for the sensing of trace mercuric (II) ions with a linear concentration of 0.01 to 10.0 µM and a detection limit of 4.6 × 10⁻⁹ mol/L. It is expected that the present study can serve as a foundation to the application of p–n heterojunction to photoelectrochemical sensors and it might be easily extended to more exciting sensing systems by photoelectrochemistry.     

Simple and sensitive spectrophotometric method for determination of tricyclic antidepressant imipramine using Fe(III)-SCN<Superscript>−</Superscript> complex

A new simple procedure for the spectrophotometric determination of tricyclic antidepressant drug imipramine is proposed. The method is based on the enhancement of the colour intensity of the Fe(III)-SCN⁻ complex due to the addition of the drug imipramine. The value of molar absorptivity of the Fe(III)-SCN⁻ imipramine complex in terms of the drug lies in the range of (2.77–3.16) × 10³ L/mol cm at the absorption maximum 460 nm. The detection limit of the method was 250 μg/L. The slope, intercept, and correlation co-efficient for the present method were found to be 0.008, 0.005, and 0.998, respectively. The effect of analytical variables on the determination of the drug and the composition of the complex are discussed. The method is applicable to the determination of imipramine in the drug samples.     

Au/Ag2S dimeric nanostructures for highly specific plasmonic sensing of mercury(Ⅱ)

Although many plasmonic nanosenosrs have been established for the detection of mercury(Ⅱ)(Hg²⁺),few of them is feasible for analyzing natural samples with very complex matrices because of insufficient method selectivity.To address this challenge,we propose an epitaxial and lattice-mismatch approach to the synthesis of a unique Au/Ag₂S dimeric nanostructure,which consists of an Au segment with excellent plasmonic characteristics,and a highly stable Ag₂S portion wi...     

A new tripodal rhodamine B derivative as a highly selective and sensitive fluorescence chemosensor for copper(Ⅱ)

A new tripodal rhodamine B derivative 2 was designed and synthesized by tripodal trialdehyde and rhodamine B hydrazide for the first time. This derivative could be used as a fluorescent chemosensor for the selective and sensitive determination of copper(II) in Tris-HCl buffer and ethanol aqueous mixed media. Under the optimum conditions described herein,fluorescence enhancement at 557/577 nm was linearly related to the concentration of copper(II) in the range of 0.10 to 10.00×10-5 mol·L-1,with a corre-latio...