左氧氟沙星印迹聚合物微球及其特异吸附研究

以甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用沉淀聚合法制备了左氧氟沙星印迹聚合物(MIP)微球,用SEM和IR分别对微球形貌和结构进行表征,用静态吸附法和Scatchard分析考察了聚合物微球对模板及其结构类似物的吸附行为和选择性识别能力.结果表明,MIP对模板分子的吸附平衡速度快,40min即可达到吸附...     

1-氨基乙内酰脲分子印迹聚合物的制备和吸附性能研究

以1-氨基乙内酰脲(AHD)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用本体聚合方法合成了分子印迹聚合物(M IP),考察了模板分子与功能单体不同比例下制备的M IP对模板分子的吸附性能。通过Scatchard分析,表明该印迹聚合物上存在一类等价的吸附位点,其结合位点的离解常数KD=4.33mmol/L。     

硅胶表面替米考星分子印迹聚合物的制备

表面印迹接枝技术即在硅胶表面或有机聚合物载体表面[1]、毛细管表面[2]进行接枝聚合并引进分子印迹的技术[3-6]。替米考星(Tilm icosin)是一种由泰乐菌素半合成的大环内脂类畜禽专用抗生素。本文以替米考星为模板分子,以甲苯为溶剂,以甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸     

S-布洛芬磁性分子印迹膜的吸附及拆分性能

以S-布洛芬为模板分子、3-氨丙基三乙氧基硅烷为功能单体、正硅酸乙酯为交联剂,采用溶胶凝胶法成功制备了对S-布洛芬具有特异选择识别功能的磁性分子印迹聚合物,并且分别采用红外(IR)光谱、扫描电镜(SEM)、X射线粉末衍射(XRD)对其结构进行了表征.通过紫外(UV)光谱研究了其对S-布洛芬的吸附性能,并且建立了高效液相色谱(HPLC)手性流动相法研究其对布洛芬的拆分.结果表明,该磁性分子印迹聚合物具有良好的磁响应性,在外加磁场下可实现快速分离;S-布洛芬分子印迹复合膜对S-布洛芬具有较好的选择结合性,其结合量达到68.3mg/g;每100mg复合膜可使外消旋布洛芬的分离度增加2.1%.     

环丙沙星分子印迹聚合物的合成及识别性能研究

采用分子印迹技术合成了以环丙沙星为印迹分子,以甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子印迹聚合物。运用平衡结合实验研究了印迹聚合物的吸附特性和选择识别能力。Scatchard分析表明,在所研究的浓度范围内,分子印迹聚合物中形成了两类不同的结合位点。底物选择实验表明,这种聚合物对环丙沙星呈现高的选择结合能力。     

青霉噻唑酸表面分子印迹聚合物的制备及其吸附性能的考察

针对青霉素药物及乳制品中致敏杂质青霉噻唑酸(PEOA)的特异性分离分析,采用表面印迹聚合法,以青霉噻唑酸为模板分子,制备青霉噻唑酸分子印迹聚合物(PEOA-MIPs)。通过静态吸附、吸附动力学及选择性实验考察其吸附性能,结果显示PEOA-MIPs对青霉噻唑酸有特异的识别能力和快速的传质速率,饱和吸附量为122.78 mg/g,静态吸附和吸附速率分别符合Langmuir模型和准二级动力学方程,表明MIPs的吸附是以化学吸附为主的单分子层吸附。利用扫描电镜(SEM)、红外光谱(FT-IR)和热重分析(TGA)对聚合物进行表征,结果显示聚合物成功接枝在硅胶表面,并具有良好的热稳定性。PEOA-MIPs对PEOA具有特异的识别能力,可用作萃取介质,为建立快速分离分析致敏杂质青霉噻唑酸的方法提供基础。     

Preparing molecularly imprinted membranes by phase inversion to separate kaempferol

Molecularly imprinted membranes (MIMs) were studied to separate special target molecule – kaempferol, an important active pharmaceutical ingredient. The kaempferol MIM were prepared by the liquid–solid phase inversion method. The effects of polyphenylene sulfone, LiCl, and ZnCl₂ on membrane performance were studied, a high Flux MIM was prepared, then the kaempferol molecularly imprinted polymer membrane, non‐molecularly imprinted membrane, and non‐molecularly imprinted polymer membrane were prepared to investigate adsorption capacity. From adsorption isotherm curve, the maximum equilibrium adsorption quantity was 890 µg/g, and it was MIM. The MIM and molecularly imprinted polymer membrane give high selectivity towards kaempferol; the non‐molecularly imprinted membrane and non‐molecularly imprinted polymer membrane showed low adsorption quantity and selectivity. The reuse experiment of the MIM indicated that it has good reuse property. All the results showed binding sites were important in the separation process of MIMs. Copyright © 2016 John Wiley & Sons, Ltd.     

Surface morphology of spin‐coated molecularly imprinted polymer films

The surface morphology of thin molecularly imprinted polymer films has been studied using atomic force microscopy (AFM). The films were produced by spin coating onto glass substrates and examined as a function of host polymer, imprinting template, casting solvent, spin‐coater rotation speed and post‐production treatment. It was observed that the gross features of such films are template controlled. The fine structure is determined by parameters such as solvent, spin speed or subsequent treatment. The relationship between these observations, polymer–template interactions and the mechanism of film formation in spin coating is discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

烟酰胺分子印迹聚合物的制备及性能研究

分子印迹技术是获得在空间和结合位点上与摸板分子完全匹配的聚合物的制备技术,因为其独有的特点在分子识别技术中的地位越来越突出.发展至今,在很多领域(如色谱分离、固相萃取、仿生传感、模拟酶催化、临床药物分析、膜分离等)得到广泛的研究和开发[1-5].     

Synthesis and characterization of molecularly imprinted polymers for recognition of ciprofloxacin

A molecularly imprinted polymer (MIP), with special molecule recognition properties of ciprofloxacin (CIP), was prepared by thermal polymerization in which ciprofloxacin acted as template molecule, α-methacrylic acid (MAA) acted as functional monomer and trimethylolpropane trimethylacrylate (TRIM) acted as crosslinker. The optimized ratio was determined to be n(CIP): n (MMA):n(TRIM)51:6:16 by investigation of the effects of different concentrations of functional monomer and the crosslinker on the MIP’s recognition properties. Equilibrium binding experiment was used to investigate the adsorption dynamics, the binding ability to template molecule and the substrate selectivity. Scatchard analysis was used to study the MIP’s binding characteristic to template molecule. The results indicated that MIP has higher adsorption ability and selectivity. The equilibrium distribution coefficient K _D was 41.64 and the separation factor α was 1.62. Scatchard analysis showed that two different kinds of binding sites were produced in the polymer matrix and their dissociation constants were calculated to be K _d1 = 5.249 × 10⁻⁵ mol·L⁻¹, K _d2 = 2.237 × 10⁻³ mol·L⁻¹. __________ Translated from Chemistry, 2008, 71(2): 132–137     

伊诺沙星分子印迹聚合物的制备及分子识别性能研究

以伊诺沙星为印迹分子、甲基丙烯酸为功能单体、季戊四醇三丙烯酸酯为交联剂,合成了对伊诺沙星有较好选择性的印迹聚合物。利用铽敏化荧光,通过静态平衡结合法和Scatchard分析法研究了此印迹聚合物的结合能力和选择性,结果表明印迹聚合物对伊诺沙星有较高的亲和性和选择性。     

Synthesis of a molecularly imprinted polymer on mSiO2@Fe3O4 for the selective adsorption of atrazine

Atrazine contamination of water is of considerable concern because of the potential hazard to human health. In this study, a magnetic molecularly imprinted polymer for atrazine was prepared by the surface‐imprinting technique using Fe₃O₄ as the core, mesoporous silica as the carrier, atrazine as the template, and itaconic acid as the functional monomer. The magnetic molecularly imprinted polymer was characterized by Fourier‐transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, and vibration‐sample magnetometry. The binding properties of the magnetic molecularly imprinted polymer toward atrazine were investigated by adsorption isotherms, kinetics, and competitive adsorption. It was found that the adsorption equilibrium was achieved within 2 h, the maximum adsorption capacity of atrazine was 8.8 μmol/g, and the adsorption process could be well described by the Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer exhibited good adsorption selectivity for atrazine with respect to structural analogues, such as cyanazine, simetryne, and prometryn. The reusability of the magnetic molecularly imprinted polymer was demonstrated for at least five repeated cycles without a significant decrease in adsorption capacity. These results suggested that the magnetic molecularly imprinted polymer could be used as an efficient material for the selective adsorption and removal of atrazine from water samples.     

白藜芦醇分子印迹复合膜的制备及其选择性能

以反式白藜芦醇为模板分子,聚偏氟乙烯微孔滤膜为支撑膜,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸脂(EDMA)为交联剂,采用热引发原位聚合方法制备了白藜芦醇分子印迹聚合物膜。研究了分子印迹膜对白藜芦醇及其结构类似物(2-萘酚、白藜芦醇甙和双酚A)的结合和透过性,并用扫描电镜对膜形貌进行了表征。结果表明,印迹复合膜对模板分子白藜芦醇具有良好的吸附选择性,印迹膜对白藜芦醇的吸附量远远大于其它结构类似物,其饱和吸附量达1.72μmol/g,为非印迹膜的3倍;尺寸效应和印迹效应是影响物质在印迹膜上的透过量的两个重要因素,尺寸比模板分子小的2-萘酚最先透过,而相对于尺寸接近或大于模板分子的双酚A或白藜芦醇甙,模板分子优先透过。而且,模板分子在印迹膜上的透过量大于非印迹膜。     

咪草烟分子印迹聚合物的制备及其选择性吸附性能的研究

以丙烯酸为聚合单体,TMPTA为交联剂,AIBN为引发剂,咪草烟为模板分子,采用在低温光聚合的方法,制备了对咪草烟分子具有选择性识别能力的分子印迹聚合物．通过IR和HPLC表征,咪草烟分子印迹聚合物对咪草烟分子具有良好的识别作用．     

Preparation and characterization of a novel molecularly imprinted polymer for the separation of glycyrrhizic acid

Molecularly imprinted polymers of glycyrrhizic acid were prepared by solution polymerization using glycyrrhizic acid as the template molecule, N‐vinypyrrolidone as functional monomer, N ,N‐methylene bisacrylamide as cross‐linker and ascorbic acid and hydrogen peroxide as initiators. Focused on the adsorption capacity and separation degree of the polymer to glycyrrhizic acid, the effects of the monomers, crosslinker and initiators were investigated and optimized. Finally, the structure of the polymer was characterized by using Fourier transform infrared spectroscopy and scanning electron microscopy. To obtain objective results, non‐imprinted molecular polymers prepared under the same conditions were also characterized. The adsorption quantity of the polymer was measured by high‐performance liquid chromatography. Under the optimum conditions, the maximum adsorption capacity of glycyrrhizic acid approached 15 mg/g, and the separation degree was as high as 2.5. The adsorption kinetics could be well described by a pseudo‐first‐order model, while the thermodynamics of the adsorption process could be described by the Langmuir model.     

Molecularly imprinted solid-phase extraction combined with molecularly imprinted polymer-sensor: a diagnostic tool applicable to creatine deficiency syndrome

Primary creatine deficiency syndromes (CDS) are a new group of disorders caused by guanidinoacetate methyltransferase (GAMT) deficiency, which affects endogenous creatine biosynthesis with depletion of body creatine. A deficiency in creatine can be corrected by treatment with oral creatine supplementation and this necessitates a simple and sensitive screening method for early detection of creatine in dilute physiologic fluids. In this work an artificial receptor, molecularly imprinted polymer (MIP), for creatine was used both as a material for solid-phase extraction (SPE) and as a sensing element in a voltammetric sensor. Using the combination of molecularly imprinted solid-phase extraction (MISPE) with a complementary MIP sensor, the minimum detectable amount was found to be 0.0015 ng mL(-1) (RSD = 1.3%, S/N = 3). The MISPE-MIP sensor combination provided up to 60-fold preconcentration, which was more than sufficient for achieving the required quantification limit 50 ng mL(-1) (or 0.0025 ng mL(-1) after 2 x 10(4)-fold dilution) for creatine in human blood serum.     

L-酪氨酸印迹分子的制备及性能研究

利用分子印迹技术采用传统加热法制备出酪氨酸他子印迹聚合物。用红外光谱分析了聚合物结构。研究了印迹他子与功能单体的物质的量对聚合物结合性的影响,吸收效率表征结果显示,与化学组成相同的空白聚合物相比,印迹聚合物具有更高的吸附效率。     

橙皮苷印迹聚合物的识别性能及机理研究

为了制备对橙皮苷(HES)具有特定识别能力的吸附材料,以HES为模板分子,丙烯酰胺(AM)为功能单体,甲基丙烯酸乙二醇酯(EDMA)为交联剂,在甲醇中制备了HES印迹聚合物(MIP),采用平衡吸附实验方法研究了聚合物的吸附性能和选择性能,探讨了聚合物的印迹机理和识别机理.结果表明,MIP对HES具有较高的亲和性和选择性.当HES浓度为0.048 mmol/L时,MIP及相应NMIP对HES的分配系数KD分别为10.17 和2.973,印迹因子α达到3.421.MIP对结构相似物芦丁及柚皮苷的选择因子β分别为2.446和1.246.机理研究表明识别位点来自AM与HES苯甲酰系统的氢键作用,吸附溶液中水含量的增加对MIP的识别能力有较大的影响.最后,以高效液相色谱研究了MIP在样品中的分离富集能力,表明该印迹聚合物具有一定的应用潜能.     

金属卟啉分子印迹聚合物的合成与性能研究

以5-(4-羟基苯基)-10,15,20-三苯基卟啉锌为印迹分子,4-乙烯基吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了具有金属卟啉识别能力的分子印迹聚合物.紫外可见滴定光谱研究表明,功能单体与印迹分子在聚合前形成1:1的配合物.通过吸附试验、荧光光谱及斯卡查特分析法,考察了分子印迹聚合物对锌卟啉化合物的识别性能.结果表明,印迹聚合物对结构类似的卟啉化合物具有良好的识别能力,对印迹分子荧光性能的影响远大于其对应的非印迹聚合物.在浓度较低时,印迹聚合物对印迹分子的结合常数和最大结合量分别为:1.61×106L/mol和3.22×10-5mol/g.     

溶胶-凝胶法制备的罗丹明B/二氧化钛分子印迹聚合物的结构与吸附性能

以罗丹明B为模板分子,以钛酸丁酯为交联剂,采用溶胶-凝胶法在酸性条件下制备了罗丹明B二氧化钛溶胶-凝胶分子印迹聚合物;利用傅立叶变换红外光谱和透射电镜分析了分子印迹聚合物的结构,使用热重分析测定了其热稳定性,采用静态吸附和动态吸附方法考察了其吸附性能,并与非印迹聚合物进行了对比.结果表明,与非印迹聚合物相比,印迹聚合物具有网络状多孔隙凝胶微结构及对模板分子的特异性识别结合位点,因而对模板分子具有更好的吸附性能和特异选择性.其原因可能在于,模板分子上的羰基与钛酸丁酯水解产生的羟基产生氢键作用,使钛酸围绕于模板分子周围,并通过缩聚形成凝胶;当模板分子洗脱后,孔隙得到保留并形成网络状凝胶,从而能够吸附更多的模板分子.