Determination of Arsenic,Mercury and Barium in Herbarium Mount Paper Using Dynamic Ultrasound-Assisted Extraction Prior to Atomic Fluorescence and Absorption Spectrometry

A dynamic ultrasound-assisted extraction method using Atomic Absorption and Atomic Fluorescence spectrometers as detectors was developed to analyze mercury, arsenic, and barium from herbarium mount paper originating from the herbarium collection of the National Museum of Wales. The variables influencing extraction were optimized by a multivariate approach. The optimal conditions were found to be 1% HNO₃ extractant solution used at a flow rate of 1 mL min^?1. The duty cycle and amplitude of the ultrasonic probe was found to be 50% in both cases with an ultrasound power of 400 W. The optimal distance between the probe and the top face of the extraction chamber was found to be 0 cm. Under these conditions the time required for complete extraction of the three analytes was 25 min. Cold vapor and hydride generation coupled to atomic fluorescence spectrometry was utilized to determine mercury and arsenic, respectively. The chemical and instrumental conditions were optimized to provide detection limits of 0.01 ng g^?1 and 1.25 ng g^?1 for mercury and arsenic, respectively. Barium was determined by graphite-furnace atomic absorption spectrometry, with a detection limit of 25 ng g^?1. By using 0.5 g of sample, the concentrations of the target analytes varied for the different types of paper and ranged between 0.4–2.55 µg g^?1 for Ba, 0.035–10.47 µg g^?1 for As, and 0.0046–2.37 µg g^?1 for Hg.     

Pressurised fluid extraction of polycyclic aromatic hydrocarbons and their polar oxidation products from atmospheric particles

An effective method utilising pressurised fluid extraction (PFE) to simultaneously extract polycyclic aromatic hydrocarbons (PAHs) and their polar oxidation products from atmospheric particulate matter (PM) is presented. The PFE method is advantageous over the traditional Soxhlet extraction due to its lower solvent consumption (9 mL compared to 90 mL) and shorter extraction time (15 min versus 18 h). Seventy compounds including PAHs and polar PAH oxidation products containing carbonyl (oxy-PAHs), hydroxyl (hydroxy-PAHs), and carboxylic acid (carboxy-PAHs) groups were targeted in the extraction of two different PM matrices: wood smoke (WS) and diesel exhaust (DE) PM. The PFE method was optimised and then compared to Soxhlet extraction for both PM matrices. The overall amounts of PAHs and their derivatives extracted from WS PM were slightly higher for the optimised PFE method (1849 ± 21 and 1863 ± 25 µg g^?1 with dichloromethane (DCM) and methanol (MeOH), respectively) than those obtained with Soxhlet extraction (1726 ± 33 and 1769 ± 22 µg g^?1 with DCM and MeOH, respectively). For DE PM (standard reference material (SRM) 2975) the overall amounts extracted by both methods were similar (average of 165 ± 6 µg g^?1), agreeing with previously published values. The detailed evaluation of extraction efficiencies for WS PM showed similar amounts for unfunctionalised PAHs (1100 µg g^?1) for both methods and solvents. For DE PM the mass yields for PAHs using PFE with DCM (62 ± 1 µg g^?1) were the highest and nearly 20% higher than those obtained with MeOH (53 ± 2 µg g^?1). The total mass yields of carboxy and hydroxy-PAHs from WS PM were also similar (412 ± 18 and 407 ± 11 µg g^?1) for PFE and Soxhlet with MeOH, and higher than when DCM was used (371 ± 5 and 379 ± 12 µg g^?1 for PFE and Soxhlet, respectively). For both matrices, the PFE yields for oxy-PAHs were higher than those obtained with Soxhlet.     

Nonextractive Trace Level Simultaneous Determination of Mercury(II) and Zinc(II) in Environmental Samples with 2‐(5‐Bromo‐2‐pyridylazo)‐5‐diethylaminophenol and Cetylpyridinium Chloride

Abstract

A simple, rapid, selective, and sensitive method for the derivative spectrophotometric determination of Hg(II) and its simultaneous determination in the presence of Zn(II) using 2‐(5‐bromo‐2‐pyridylazo)‐5‐diethylaminophenol in the presence of cetylpyridinium chloride, a cationic surfactant, has been developed. The molar absorption coefficient and analytical sensitivity of the 1∶1 Hg(II) complex at 558 nm (λ_max) are 5.78×10⁴ L mol^?1 cm^?1 and 0.67 ng mL^?1, respectively. The detection limit of Hg(II) is 1.40×10^?2 ng mL^?1, and Beer's law is valid in the concentration range 0.05–2.40 µg mL^?1. Overlapping spectral profiles of Hg(II) and Zn(II) complexes in zero‐order mode interfere in their simultaneous determination. However, 0.10–2.00 µg mL^?1 of Hg(II) and 0.065–0.650 µg mL^?1 of Zn(II), when present together, can be simultaneously determined at zero cross point of the derivative spectrum, without any prior separation. The relative standard deviation for six replicate measurements of solutions containing 0.134 µg mL^?1 of Hg(II) and 0.620 µg mL^?1 of Zn(II) is 1.72 and 1.47%, respectively. The proposed method has successfully been evaluated for trace level simultaneous determination of Hg(II) and Zn(II) in environmental samples.     

First Systematic Voltammetric Measurements of Cd,Pb, and Cu in Hydrofluoric Acid-Dissolved Siliceous Spicules of Marine Sponges: Application to Antarctic Specimens

Ultrasensitive Square Wave Anodic Stripping Voltammetry is used for the first time for the systematic determination of Cd, Pb, and Cu in siliceous spicules of marine sponges; the procedure is performed directly in hydrofluoric acid solution, according to a procedure previously established in our laboratory, with the aim of demonstrating the feasibility of such measurements and to improve knowledge of heavy metal distribution in Porifera. The following Demospongiae species are considered: Sphaerotylus antarcticus, Haliclona sp., Kirkpatrickia coulmani, and Inflatella belli from the Ross Sea, Antarctica, and Petrosia ficiformis from the Mediterranean Sea, Italy. The method shows a good accuracy; the analytical variability is approximately ±10% for all the metals studied and for all the measurements performed, showing a good repeatability of the method in consideration of low metal concentrations (order of tenths of µg g^?1 dry weight, i.e., of hundreds of ng L^?1 in the HF solution). In particular, the concentrations of heavy metals in the body of the sponge vary in the range 0.038–0.93 µg g^?1 dry weight (d.w.) for Cd, 0.024–0.52 µg g^?1 d.w. for Pb, and 0.32–1.3 µg g^?1 d.w. for Cu. Similar ranges of concentration were recorded in the oscula of S. antarcticus and I. belli. Heavy metal concentration in the spicules can vary within and between specimens and, in particular, siliceous spicules of Antarctic sponges show higher concentrations of Cd and Pb and lower concentrations of Cu than those from the Mediterranean.     

Occurrence of cytostatic compounds in hospital effluents and wastewaters,determined by liquid chromatography coupled to high-resolution mass spectrometry

The occurrence of 26 commonly used cytostatic compounds in wastewaters was evaluated using an automated solid-phase extraction (SPE) method with liquid chromatography–high-resolution mass spectrometry (LC–HRMS). Detection was optimized using Oasis HLB SPE cartridges at pH 2. Two hospital effluents and their two receiving wastewater treatment plants were sampled over five days. In hospital effluents, eight cytostatics were detected at levels up to 86.2 μg L^?1 for ifosfamide, 4.72 μg L^?1 for cyclophosphamide, and 0.73 μg L^?1 for irinotecan, the three most relevant compounds identified. Cyclophosphamide and megestrol acetate were found in wastewaters at concentrations up to 0.22 μg L^?1 for the latter. The predicted environmental concentrations (PEC) in sewage effluents of ifosfamide (2.4–4.3 ng L^?1), capecitabine (11.5–14.2 ng L^?1), and irinotecan (0.4–0.6 ng L^?1), calculated from consumption data in each hospital, published excretion values for the target compounds, and wastewater elimination rates, were in agreement with experimental values.     

Cadmium and Lead Distribution in Marine Soil Sediments,Terrestrial Soil,Terrestrial Rock,and Atmospheric Particulate Matter around Split,Croatia

The distributions of cadmium and lead in marine sediments, surrounding soil, stones, and atmospheric particulate matter were determined at different locations in Split, Croatia. The determination of cadmium and lead was performed by flame atomic absorption spectrometry whereas atmospheric particulate matter samples were analyzed by inductively coupled plasma–optical emission spectrometry. Cadmium concentrations in the stones and soil were between 0.2 to 0.6 µg g^?1 and 0.2 to 0.9 µg g^?1. The concentration in the atmospheric particulate matter were <0.2 µg m^?2 d^?1(detection limit) to 1.4 µg m^?2 d^?1. Lead concentrations in marine sediments, stones, soil, and atmospheric particulate matter ranged from 31.2 to 144.4 µg g^?1, 9.3 to 29.4 µg g^?1, 11.3 to 66.1 µg g^?1, and 0.5 to 241.4 µg m^?2 d^?1, respectively. The relationship between determined parameters was established using principal component analysis and the results are in agreement with the assumption that anthropogenic sources play important roles for lead and cadmium distribution.     

Development of Immunoaffinity Sample-Purification for GC–MS Analysis of Ractopamine in Swine Tissue

A method combining immunoaffinity chromatography with gas chromatography–mass spectrometry (GC–MS) has been established for determination of ractopamine residues in swine liver and urine. After clean-up on an immunoaffinity chromatography column, GC–MS analysis revealed recovery from blank swine liver and urine fortified at 2.5–20 ng g^?1 (ng mL^?1 for urine), respectively, was 68.2–78.6 and 76.2–83.1%. The limits of detection and quantification were 0.5 ng g^?1 (or ng mL^?1) and 2.0 ng g^?1 (or ng mL^?1), respectively. The procedure was used for analysis of ractopamine residues in samples of swine liver and urine in which the levels were unknown. The amounts detected were 9–216 ng g^?1 (ng mL^?1).     

Determination of Heavy Metal Content in Wild-Edible Mushroom from Jordan

The heavy metal content was investigated for six mushroom species native to Jordan. Metal (Cu, Pb, Cd, Fe, Zn, Mn, Ni, and Co) content in soil substrate and their relation to metal concentrations in mushroom and underlying soil were determined by flame and graphite furnace atomic absorption spectrometry. Mushroom species and soil were collected from different places in Jordan. The highest Cu level was 51.84 µg g^?1 for the species Lepista nuda; whereas, the lowest Cu level was found to be 18.51 µg g^?1 in Calvatia utriformis. Among the wild mushrooms, the highest Pb level was found as 4.81 µg g^?1 in Bovista plumbea, whereas the lowest Pb concentration was 2.01 µg g^?1 in Calvatia utriformis. The highest Cd level was determined as 1.9 µg g^?1 for Lepista nuda, whereas the lowest Cd level was 0.58 µg g^?1 for the species of Polyporus frondosus. The highest Zn level was 58.77 µg g^?1 for the species of Lepista nuda and the lowest Zn concentration was found 35.98 µg g^?1 in Calvatia utriformis. The highest Fe level was found as 317 µg g^?1 in Lepista nuda, whereas the lowest Fe concentration was 211.7 µg g^?1 in Calvatia utriformis. The highest Mn content was 36.55 µg g^?1 for Russula delica, whereas the lowest Mn level was 24.5 µg g^?1 for the species Bovista plumbea. The highest Ni content was found as 12.65 µg g^?1 for Russula delica, whereas the lowest Ni level was 0.17 µg g^?1 for Bovista plumbea. The highest Co content in the tested mushrooms was found as 3.5 µg g^?1 for the species of Agaricus bisporus, whereas the lowest Co level was 0.85 µg g^?1 for Polyporus frondosus. The results indicated that, in general, heavy metal contents in all mushroom species were lower than the underlying soil substrates except for some mushroom species.     

Simultaneous Estimation of Atorvastatin Calcium, Ramipril and Aspirin in Capsule Dosage Form by RP-LC

A simple, sensitive, precise and accurate reversed phase liquid chromatographic method has been developed for the simultaneous estimation of atorvastatin (AT) calcium, ramipril (RA) and aspirin (AS) from capsule dosage form. The method was developed using a Phenomenex Luna C₁₈ (250 mm, 4.6 mm i.d., 5 µm) column with a mobile phase consisting of 0.1%, orthophosphoric acid buffer:acetonitrile:methanol (45:50:5 v/v/v), pH 3.3, at a flow rate of 1 mL min^?1. Detection was carried out with ultra-violet detection at 210 nm. The retention times were about 12.19, 2.35, and 3.95 min for AT calcium, RA and AS, respectively. The developed method was validated for linearity, accuracy, precision, limit of detection, limit of quantitation and robustness. The linearity ranges were 1–6 µg mL^?1 for AT calcium, 0.5–3 µg mL^?1 for RA and 7.5–45 µg mL^?1 for AS with mean recoveries of 100.59 ± 0.68, 100.62 ± 0.83 and 100.49 ± 0.73% for AT calcium, RA and AS, respectively. Limit of detection obtained were 29.85 ng mL^?1 for AT calcium, 4.71 ng mL^?1 for RA and 85.13 ng mL^?1 for AS. Impurity of salicylic acid was found in capsule dosage form at the retention time of about 4.84 min. The proposed method can be used for the estimation of these drugs in combined dosage forms.     

Determination of reference interval values for inorganic elements in whole blood samples of humans and laboratory animals by X-ray fluorescence spectrometry

Inorganic elements are responsible for essential bodily functions, such as osmotic regulation, cardiac frequency and contractibility, blood clotting and neuromuscular excitability. The determination of inorganic elements in corporeal fluids such as blood, serum, plasma and urine is used as a monitor for a part or the whole organism; their values, then, are compared with reference interval values. In this study, the energy dispersive X-ray fluorescence spectrometry (EDXRF), applying the Fundamental Parameters method, for the determination of inorganic elements in whole blood samples from humans and laboratory animals, was used. Peripheral blood samples were collected and, before coagulation, 100 μL of sample were deposited onto Whatman No. 41 filter paper and dried, using infrared spotlight. The reference interval values for healthy Brazilian population of Na were found to be 1,788–1,826 μg g^?1, of Mg 63–75 μg g^?1, of P 602–676 μg g^?1, of S 1,519–1,718 μg g^?1, of Cl 2,743–2,867 μg g^?1, of K 1,508–1,630 μg g^?1, of Ca 214–228 μg g^?1, of Fe 170–184 μg g^?1, of Cu 4–6 μg g^?1 and of Zn 1–3 μg g^?1. The reference interval values for golden hamster (Mesocricetus auratus) of Na were found to be 1,714–1,819 μg g^?1, Mg 51–79 μg g^?1, P 970–1,080 μg g^?1, S 1,231–1,739 μg g^?1, Cl 2,775–2,865 μg g^?1, of K 1,968–2,248 μg g^?1, of Ca 209–257 μg g^?1, of Fe 145–267 μg g^?1, of Cu 4–6 μg g^?1 and of Zn 3–5 μg g^?1. A comparative study between EDXRF and instrumental neutron activation analysis data was carried out and the results for both techniques are statistically equal (α = 0.05). The results contribute for the establishment of reference interval values for Na, Mg, P, S, Cl, K, Ca, Cu and Zn in the healthy Brazilian population and the referred laboratory animal species.     

Trace metal analyses in honey samples from selected countries. A potential use in bio-monitoring

Honey is a sweet product made by bees using nectar from flowers. Concentrations of Ca, K, Mg, Fe, Zn, Mn, Cu, Pb and Cd were determined in 13 honey samples from the selected regions around the world. Levels of Ca, Mg, Cu, Fe, Zn and Mn were measured using flame atomic absorption spectrometry (FAAS). Potassium concentration was determined via flame photometry. Concentrations of Cd and Pb were determined using the electrothermal technique (ETAAS). It was estimated that the examined samples of honey from Greece, Turkey, Spain, Poland, Mexico, Argentina and Italy were of good quality in terms of metal concentrations (compliant with the norms referring to food products – WHO, Fifty-third Report of the joint FAO/WHO Expert Committee on Food Additives; Technical Report Series 776, Geneva), although the analysed samples were not free of heavy metals. The concentrations of the elements in the honey samples ranged from 2.38 to 9.31 μg · g^?1 for Zn, from 3.86 to 35.10 μg · g^?1 for Fe, from 0.19 to 21.64 μg · g^?1 for Mn, from 49.53 to 1006.90 μg · g^?1 for Ca, from 388.25 to 4761.50 μg · g^?1 for K and from 0.20 to 1.53 μg · g^?1 for Cu and regarding heavy metals from 0.11 to 2.78 μg · g^?1 for Pb and from 0.02 to 0.44 μg · g^?1 for Cd. According to these results it was found that the concentrations of heavy metals in the honey samples (except for alfalfa honey and eucalyptus honey from Italy) were under the acceptable limits for foods set out by the FAO/WHO. It was confirmed that the application of chemometric tools supports the extraction of significant information from analytical data, even though the availability of samples is not fully sufficient (this problem is often encountered in environmental analyses).     

Trace analysis of benzophenone-derived compounds in surface waters and sediments using solid-phase extraction and microwave-assisted extraction followed by gas chromatography–mass spectrometry

This study describes a procedure for determining eight benzophenone-derived compounds in surface waters and sediments. These include the pharmaceutical ketoprofen, its phototransformation products 3-ethylbenzophenone and 3-acetylbenzophenone, and five benzophenone-type ultraviolet (UV) filters. The proposed analytical method involves the pre-concentration of water samples by solid-phase extraction (SPE) and microwave-assisted extraction (MAE) of sediment samples followed by derivatization and analysis by gas chromatography–mass spectrometry. Different parameters were investigated to achieve optimal method performance. Recoveries of 91 to 96 % from water samples were obtained using HLB Oasis SPE cartridges, whereas MAE of sediments (30 min at 150 °C) gave recoveries of 80 to 99 %. Limits of detection were between 0.1 and 1.9 ng L^?1 for water samples and from 0.1 to 1.4 ng g^?1 for sediment samples. The developed method was applied to environmental samples and revealed the presence of UV filters in the majority of the surface waters with up to 690 ng L^?1 of 2-hydroxy-4-methoxybenzophenone. By contrast, ketoprofen (≤2,900 ng L^?1) and its degradation products (≤320 ng L^?1) were found in only two rivers, both receiving wastewater treatment plant effluents. Sediment analysis revealed benzophenone to be present in concentrations up to 650 ng g^?1, whereas concentrations of other compounds were considerably lower (≤32 ng L^?1). For the first time, quantifiable amounts of two ketoprofen transformation products in the aqueous environment are reported.     

Colorimetric Determination of Lead Using Gold Nanoparticles

A combined homogeneous assay and colorimetric determination method using gold nanoparticles was developed for rapid determination of lead(II) in contaminated natural waters. The presence of lead(II) in the colloidal gold suspension causes a change in the absorbance of the suspension. An increase in the absorption property at 595 nm is accompanied by a change in the size of the gold nanoparticles. High concentrations of lead cause aggregation of the gold colloids. Colloidal gold nanoparticles were synthesized using tannic acid as the reducing agent; this reagent allowed selective determination of lead in 10 µL of water, with a detection limit of 310 ng mL^?1 with an analysis time of 5 min. The coefficient of variation for lead(II) within the working range of the assay (520 ng mL^?1–13 µg mL^?1) varied from 1.3% to 9.2%. The limit of detection using this method with a sample volume of 50 µL was 60 ng mL^?1. The coefficient of variation for lead over the working range of the determined concentrations (80 ng mL^?1–25 µg mL^?1) varied from 0.2% to 9.3%, while the values for the inter-day assay (n = 8) were less than 10%. The method was employed for the analysis of river, lake, marsh, and spring water; the recovery of lead was determined to be 72.5%–130% for 10 µL of water and 93.6%–114.7% for 50 µL.     

Sensitive Analysis of Malondialdehyde in Human Urine by Derivatization with Pentafluorophenylhydrazine then Headspace GC–MS

A sensitive method based on derivatization with pentafluorophenylhydrazine then headspace gas chromatography–mass spectrometry has been used for analysis of malondialdehyde in human urine. Preparation of urine sample by one-step derivatization/evaporation was performed by reaction of malondialdehyde with pentafluorophenylhydrazine in a headspace vial for 10 min; the derivatives were then injected in GC–MS analysis. The reaction was performed at pH 3, and total analysis time was 35 min. The method detection limit was 0.04 μg L^?1. For MDA concentrations of 2.0 and 10.0 μg L^?1 the relative standard deviation was less then 5%. The concentration of MDA in urine was measured to be 0.199 ± 0.252 μmol g^?1 creatinine (0.022 ± 0.028 μmol mmol^?1 creatinine).     

HPLC and UPLC Methods for the Simultaneous Determination of Enalapril and Hydrochlorothiazide in Pharmaceutical Dosage Forms

High efficiency and less elution are the basic requirements of high-speed chromatographic separation. In this study, a new gradient reverse phase chromatographic methods were developed using HPLC and UPLC systems for simultaneous determination of enalapril maleate (ENL) and hydrochlorothiazide (HCZ) in pharmaceutical dosage forms. The chromatographic separations of ENL and HCZ were achieved on a Waters μ-Bondapak C 18, (300 × 3.9 mm, 10 μm) and Waters Acquity BEH C18 (100 × 2.1 mm, 1.7 μm) columns for HPLC within 5.30 min and UPLC within a short retention time of 1.95 min, respectively. A linear response was observed over the concentration range 0.270–399 μg mL^?1 of ENL, 0.260–399 μg mL^?1 of HCZ for HPLC system and 0.270–399 μg mL^?1 of ENL and 0.065–249 μg mL^?1 of HCZ for UPLC system. Also, limit of detection for ENL was 1.848 ng mL^?1 and 31.477 ng mL^?1 for HCZ, 2.804 ng mL^?1 for ENL and 2.943 ng mL^?1 for HCZ using HPLC and UPLC, respectively. The proposed methods were validated according to ICH guideline with respect to precision, accuracy, and linearity. Forced degradation studies were also performed for both compounds in bulk drug samples to demonstrate the specificity and stability indicating power of the HPLC method. Comparison of system performance with conventional HPLC was made with respect to analysis time, efficiency, and resolution.     

Level of Polychlorinated Biphenyls in Marine Environment of Algiers Bay,Algeria

Polychlorinated Biphenyls (PCBs) are persistent organic pollutants with significant bioaccumulation in the global environment. Owing to their high toxicity and lipophilic property, PCBs are potential threat to the human and ecological system.

The objective of this work was to investigate the polychlorinated biphenyls in seawater and blue mussels Mytilus galloprovincialis collected in the eastern coastal side of the Algiers bay. Surface and bottom water samples were collected at six different periods from July to October 2002 in the port of Tamentfoust and four locations around the port. Mussel samples were collected from Tamentfoust port and Surcouf beach. After extraction, the PCBs levels were determined in marine water and biological samples by gas chromatography with electron capture detector. Total polychlorinated biphenyls concentrations varied from 4.0 to 18.8 ng · L^?1 in surface and from 4.4 to 16.6 ng · L^?1 in bottom seawater and were relatively high in August (30th and 45th days).

In mussels that concentrate the organochlorinated compounds in their tissues, the sum of ICES 7 PCBs concentrations was relatively high. It ranged from 64.2 to 185.8 ng · g^?1 dw (average 125.8 ng · g^?1 dw) in samples collected from Surcouf. The level of contamination in Tamentfoust port mussels was about twice higher (225.2 ng · g^?1 dw).

The observed PCBs distribution was close to that of common commercial mixture and suggests an industrial origin of this pollution emitted from a continental source in addition to the port activities. Although the use of target compounds has been banned for more than three decades, they are still persistent in Algiers Bay.     

Determination of Rare Earth Elements in Navel Oranges from Different Geographical Regions of China by Inductively Coupled Plasma-Mass Spectrometry

There are three major production bases of navel oranges in China, including Southern Jiangxi Province, Southern Hunan Province, and the Three Gorges District of the Yangtze River. Southern Jiangxi and Southern Hunan are also famous for rare earth elements that are ionic, making them easily passed from soil to plants and fruits. To test the relative enrichment of rare earth elements in navel oranges from these production sites, ICP-MS analysis was performed following a microwave digestion procedure. The concentrations of La, Ce, Pr, and Nd in navel orange peels from Southern Jiangxi and Southern Hunan (1.26–1.86 µg g^?1) were much higher than results from the Three Gorges (0.23–0.46 µg g^?1). Moreover, yttrium is relatively enriched (0.25–0.29 µg g^?1) in navel orange peels from Southern Jiangxi at concentrations almost twice that from Southern Hunan (0.15 µg g^?1). The various concentrations and distribution of rare earth elements offers the possibility of traceability and authentication of navel oranges. Meanwhile, navel orange peels from Southern Jiangxi posed no risk in consumption, based on the maximum limit level (≤0.7 µg g^?1, wet weight) of rare earth elements in food issued in China (GB 2762-2005).     

LC–MS Determination and Pharmacokinetic Study of Salidroside in Rat Plasma after Oral Administration of Traditional Chinese Medicinal Preparation Rhodiola crenulata Extract

A simple, rapid and sensitive liquid chromatography–mass spectrometry (LC–MS) method was developed for the quantification of salidroside in rat plasma and the study of its pharmacokinetics after oral administration of 15 g kg^?1 Rhodiola crenulata extract to Wistar rats. A 200 μL plasma sample was extracted by acetonitrile and performed on Kromasil C₁₈ column (150 mm × 4.6 mm, 5 μm) with the mobile phase of acetonitrile–water (11:89) within a run time of 8 min. The analyte was monitored with electrospray ionization (ESI) by selected ion monitoring (SIM) mode. The target ions were m/z 299.20 for salidroside and m/z 150.00 for internal standard (IS) paracetamol. A good linear relationship was obtained over the range of 100–20,000 ng mL^?1 and the lower limit of quantification was 100 ng mL^?1. The validated method was successfully applied for the pharmacokinetic study of salidroside in rat. After oral administration of Rhodiola crenulata extract, the main pharmacokinetic parameters T _max, T _1/2, C _max, AUC _0?t and AUC _0?∞ were 0.56 ± 0.21 h, 7.91 ± 4.42 h, 3,386 ± 2,138 ng mL^?1, 16,146 ± 6,558 ng h mL^?1 and 18,599 ± 6,529 ng h mL^?1, respectively.     

Mercury speciation in fish tissue by eco-scale thermal decomposition atomic absorption spectrometry: method validation and risk exposure to methylmercury

A non-chromatographic method for Hg speciation in fish muscle using eco-scale thermal desorption atomic absorption spectrometry was validated according to the demands of the Decisions 2007/333/EC, 2011/836/EC and 2002/657/EC. The method is based on the determination of total Hg in solid sample and MeHg⁺, respectively, after double liquid–liquid extraction (47% HBr, toluene, 1% l-cysteine) according to a procedure recommended by the European Commission. The method was applied for the speciation of Hg in fish muscle to asses the weekly intake and health risk exposure to MeHg⁺. The method provided calibration coefficients better than 0.999, limits of detection of 0.2 µg kg^?1 total Hg and 3.0 µg kg^?1 MeHg⁺. The accuracy of the method assessed by the analysis of CRMs was 100 ± 9% for total Hg and 101 ± 13% for MeHg⁺ for a coverage factor k = 2. The figures of merit of the method comply with the requirements in the European legislation. Total Hg in the analyzed fish species was in the range 12–108 µg kg^?1 wet mass, of which 83–97% as MeHg⁺. Although significant variation in total Hg was observed among fish species, no differences in terms of distribution of organic and inorganic Hg species were identified. No risk exposure to MeHg⁺ was ascertained from muscle fish consumption from reliable sources, since weekly intake was below 30% of provisional tolerable weekly intake of 1.6 µg kg^?1 body weight. Speciation is recommended as MeHg⁺ is much more helpful than total Hg to evaluate the dietary risk exposure.     

A novel chemiluminescence reaction system for the determination of lincomycin with diperiodatonickelate(IV)

A sensitive and high selective chemiluminescence (CL) method was developed for the determination of lincomycin in acid medium using diperiodatonickelate as a reagent. The mechanism leading to luminescence is discussed by comparing the spectra of fluorescence and CL. Relative CL intensity is linear in the range from 8.0 ng mL^?1 to 1.0 µg mL^?1, the limit of detection is 2.5 ng mL^?1 (3σ), and the relative standard deviation is 4.0% at 0.1 µg mL^?1 of lincomycin (n?=?7). The method was successfully applied to the determination of lincomycin in injections, human urine, and in serum samples.