A combinatorial approach to study solvent-induced self-assembly of mixed poly(methyl methacrylate)/polystyrene brushes on planar silica substrates: effect of relative grafting density

This article reports the study of the effect of relative grafting densities of two polymer chains on solvent-induced self-assembly of mixed poly(methyl methacrylate) (PMMA)/polystyrene (PS) brushes through a combinatorial approach. Gradient-mixed PMMA/PS brushes were synthesized from a gradient-mixed initiator-terminated monolayer by combining atom transfer radical polymerization (ATRP) and nitroxide mediated radical polymerization (NMRP) in a two-step process. The gradient-mixed initiator-terminated monolayer was fabricated by first formation of a gradient in density of an ATRP initiator through vapor diffusion followed by backfilling of an NMRP-initiator-terminated trichlorosilane. After treatment of a gradient-mixed brush whose PS Mn was slightly lower than that of PMMA with glacial acetic acid, a selective solvent for PMMA, relatively ordered nanodomains were observed in the region where the ratio of PS to PMMA grafting density (number of polymer chains/nm2) was in the range from 0.67 to 2.17 and the overall grafting density was approximately 0.85 polymer chains/nm2. Contact angle hysteresis were high (> or =40 degrees ) in this region and XPS studies confirmed that the PMMA chains were enriched at the outermost layer. The nanodomains are speculated to be of a micellar structure with PS chains forming the core shielded by PMMA chains.     

Controlled grafting of MMA onto cellulose and cellulose acetate

Homogeneous graft copolymerization of methyl methacrylate onto cellulose and cellulose acetate was carried out in various solvents and solvent systems taking ceric ammonium nitrate, tin (II) 2-ethyl hexanoate [Sn(Oct)₂] and benzoyl peroxide as initiators. The effect of solvents, initiators, initiator and monomer concentration, on graft yield, grafting efficiency and total conversion of monomer to polymer were studied. Formation of Ce³⁺ ion during grafting in presence of CAN enhances the grafting efficiency. Methylene blue was used as a homopolymer inhibitor and controlled the molecular weight of the grafted polymer and its effect on grafting was also studied. In presence of MB, amount of PMMA homopolymer formation reduced and consequently grafting efficiency increased. The number average molecular weights and polydispersity indices of the grafted PMMA were found out by gel permeation chromatography. The products were characterized by FTIR and ¹H-NMR analyses and possible reaction mechanisms were deduced. Finally, thermal degradation of the grafted products was also studied by thermo-gravimetric and differential thermo-gravimetric analyses.     

新型螺吡喃化合物的合成及应用研究

设计合成了几种新型螺吡喃化合物(SP), 采用¹H NMR, IR 和MS 对其结构进行表征. 研究了目标产物的光致变色性能及其影响因素, 并对SP1 在高分子材料领域的应用作了初步研究. 结果表明: 苯并吡喃环连有强吸电子基时, 最大吸收峰红移; 1 位N原子上连有柔性长链基团时, 热褪色速率较慢; 采用紫外光照射目标产物不同时间, SP1 表现出较好的抗光疲劳性. 分别以SP1 为接枝组分和共混组分制备两种高分子材料SP-g-hPMMA 和SP-m-PMMA, 通过紫外光辐照动力学研究表明, SP-g-hPMMA 和SP-m-PMMA 均表现出比SP1 优异的光致变色性能, 且不影响PMMA 的机械性能. SP1 有望用于高分子光致变色材料领域.     

高分散性SiO_2/PMMA复合材料的制备与表征——稀释分散性

以高无机含量SiO2/聚甲基丙烯酸甲酯(PMMA)接枝复合材料为预分散母料,与PMMA树脂进行熔融共混,制得低无机含量的SiO2/PMMA复合材料.通过切片透射电镜(TEM)观察熔融共混过程中预分散母料内堆积SiO2粒子分散状态的演化.发现预分散母料接枝状态对其影响最为显著,不经接枝修饰的SiO2粒子经熔融共混后,不可避免地会在熔体中产生大量亚微米级的立体团聚体;复杂接枝预分散母料内构成以SiO2粒子为交联点的立体交联结构,其中的堆积SiO2粒子不能在剪切场中得到有效解离和释放;只有在使用简单接枝预分散母料时,基体高分子链才能不断地渗透扩散进入预分散母料内,而预分散母料可被不断地溶胀和撕裂,因而其中的堆积SiO2才可不断地向基体相迁移和扩散,并最终在整个复合材料内实现初级粒子形式的高度均匀稳定分散.     

Impact of modified alumina oxides on the fire properties of PMMA and PS nanocomposites

Grafting of ethylene glycol methacrylate phosphate (EGMP) monomer polymerized from alumina nanoparticles has been performed in order to confer a better thermal stability and fire retardancy to PMMA and PS nanocomposites. Grafting and polymerization processes have been investigated using FTIR, TGA, and elemental analyses. Thermal stability and decomposition routes of monomer and polymer grafted alumina have been studied using thermogravimetric analysis and compared with the thermal behavior of the same alumina modified with octylsilane. The thermal stability of EGMP supported by the nanoparticles is higher than that of free EGMP. The incorporation of 5 wt% of both surface treated alumina in PMMA and PS leads to an improvement of thermal stability in comparison with unfilled polymers as well as nanocomposites containing unmodified alumina. Furthermore, the grafting of organic compounds on alumina also allows the peak of heat release rate measured using a cone calorimeter to be significantly reduced for PMMA nanocomposites. Copyright © 2010 John Wiley & Sons, Ltd.     

Topochemistry of cellulose nanofibers resulting from molecular and polymer grafting

The aim of this study was to synthesize hydrophobic cellulose nanofibers (CNFs) using different chemical treatments including polymer and molecular grafting. For polymer grafting, immobilizing poly (butyl acrylate) (PBA) and poly (methyl methacrylate) (PMMA) on CNFs were implemented by the free radical method. Also, acetyl groups were introduced directly onto the CNFs surface by acetic anhydride for molecular grafting. The gravimetric and X-ray photoelectron spectroscopy analysis showed the high grafting density of PMMA on the surface of CNFs. AFM results revealed that molecular grafting created non-uniformity on the CNFs surface, as compared to polymer brushes. In addition, thermodynamic work of adhesion and work of cohesion for the modified CNFs were reduced in water and diiodomethane solvents. Dispersion factor was studied to indicate the dispersibility of CNFs in polar and non-polar media. Dispersion energy was reduced after modification as a result of decreasing interfacial tension and the dispersibility of modified CNFs was improved in diiodomethane.     

Polymer brushes grafted to "passivated" silicon substrates using click chemistry

We present herein a versatile method for grafting polymer brushes to passivated silicon surfaces based on the Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition (click chemistry) of omega-azido polymers and alkynyl-functionalized silicon substrates. First, the "passivation" of the silicon substrates toward polymer adsorption was performed by the deposition of an alkyne functionalized self-assembled monolayer (SAM). Then, three tailor-made omega-azido linear brush precursors, i.e., PEG-N3, PMMA-N3, and PS-N3 (Mn approximately 20,000 g/mol), were grafted to alkyne-functionalized SAMs via click chemistry in tetrahydrofuran. The SAM, PEG, PMMA, and PS layers were characterized by ellipsometry, scanning probe microscopy, and water contact angle measurements. Results have shown that the grafting process follows the scaling laws developed for polymer brushes, with a significant dependence over the weight fraction of polymer in the grafting solution and the grafting time. The chemical nature of the brushes has only a weak influence on the click chemistry grafting reaction and morphologies observed, yielding polymer brushes with thickness of ca. 6 nm and grafting densities of ca. 0.2 chains/nm2. The examples developed herein have shown that this highly versatile and tunable approach can be extended to the grafting of a wide range of polymer (pseudo-) brushes to silicon substrates without changing the tethering strategy.     

Preparation of well-defined core-shell particles by Cu2+-mediated graft copolymerization of methyl methacrylate from bovine serum albumin

Small well-defined core-shell poly(methyl methacrylate)-bovine serum albumin (PMMA-BSA) particles have been prepared in a direct one-step graft copolymerization of MMA from BSA at 75 degrees C in water with a trace amount of Cu2+ (5 microM). Initially, BSA generates free radicals and acts as a multifunctional macroinitiator, which leads to the formation of an amphiphilic PMMA-BSA grafting copolymer. Such formed copolymer chains act as a polymeric stabilizer to promote further emulsion polymerization of MMA inside, resulting in surfactant-free stable core-shell particles, confirmed by a transmission electron microscopic (TEM) analysis. The PMMA-BSA copolymers as well as PMMA homopolymer inside the particles were isolated by Soxhlet extraction and characterized by Fourier transform infrared spectroscopy (FT-IR) and thermogravimetry (TG). The highest grafting efficiency was approximately 80%. Effects of the reaction temperature, the MMA/BSA ratio, and the concentrations of Cu2+ and BSA on such core-shell particle formation have been systematically studied. Due to their inert PMMA core and biocompatible BSA shell, these small polymer particles are potentially useful in biomedical applications.     

A new theory for symmetric orbital and tensor

Ｐｏｉｎｔｇｒｏｕｐｓｙｍｍｅｔｒｉｅｓａｒｅｅｓｓｅｎｔｉａｌｔｏｔｈｅｉｌｌｕｓｔｒａｔｉｏｎｏｆｔｈｅｒｅｌａｔｉｏｎｓｈｉｐｓｂｅｔｗｅｅｎｍｏｌｅｃｕｌａｒｓｔｒｕｃｔｕｒｅｓａｎｄｐｒｏｐｅｒｔｉｅｓ,ｔｈｅｓｔａｔｅｌａｂｅｌｉｎｇａｎｄｓｐｅｃｔｒｏｓｃｏｐｉｃｓｅｌｅｃｔｉｏｎｒｕｌｅｓ,ａｓｗｅｌｌａｓｔｈｅｓｉｍｐｌｉｆｉｃａｔｉｏｎｏｆｔｈｅｏｒｅｔｉｃａｌｃａｌｃｕｌａｔｉｏｎｓｏｆｑｕａｎｔｕｍｃｈｅｍｉｓｔｒｙ.Ｉｎｔｈｅｐｏｉｎｔｇｒｏｕｐｔｈｅｏｒｙ,ｈｏｗｅｖｅｒ…     

PS/PMMA mixed polymer brushes on the surface of clay layers: Preparation and application in polymer blends

Polystyrene (PS) and poly(methyl methacrylate) (PMMA) mixed polymer brushes on the surface of clay layers were prepared by using in situ free radical polymerization. Free radical initiator molecules with two quaternary ammonium groups at both ends were intercalated into the interlayer spacing of clay layers. The amount of polymer brushes grafted on the surface of clay layers can be controlled by controlling the polymerization time. Thermogravimetric analysis, X‐ray diffraction, and high‐resolution transmission electron microscope results indicated successful preparation of the mixed polymer brushes on the surface of clay layers. The kinetics of the grafting of the monomers was also studied. The mixed polymer brushes on the surface of clay layers were used as compatibilizers in blends of PS and PMMA. In the blends, the intercalated clay particles tend to locate at the interface of two phases reducing the interfacial tension. In the meanwhile, PMMA homopolymer chains tend to intercalate into clay layers. The driving force for the intercalation is the compatibility between homo‐PMMA chains and PMMA brushes on the surface of clay layers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5329–5338, 2007     

含席夫碱基的螺吡喃双功能光致变色材料的合成及性质

设计合成了一系列含席夫碱基的螺吡喃双功能光致变色材料4a~4n. 通过1H NMR, IR和HRMS对其结构进行了表征. 研究了化合物在几种溶剂和PMMA膜中的光致变色性质, 研究了化合物4a在甲醇中, 以及化合物4a和4f在高分子介质聚甲基丙烯酸甲酯(PMMA)中的消色过程. 结果表明, 化合物4e在PMMA膜中光照后呈现出与其它化合物不同的颜色, 为罕见的绿色. 化合物4a在二氯甲烷溶液中有良好的荧光性能. 所合成的新型含席夫碱基的螺吡喃双功能光致变色材料在甲醇、二氯甲烷和环己烷溶液中及在PMMA膜中均表现出良好的光致变色性质.     

Investigation of polymer miscibility by spectroscopic methods. III. Labeling of poly(vinyl chloride), poly(methyl methacrylate) and poly(styrene-co-acrylonitrile) with fluorescent chromophores for nonradiative energy transfer studies

Poly(vinyl chloride) (PVC) is generally recognized as miscible with s.poly(methyl methacrylate) (s.PMMA), poly(?-caprolactone) (PCL) and poly(styrene-co-acrylonitrile) copolymer (SAN) containing 27 wt % AN. Nonradiative energy transfer (NRET) is a very sensitive technique in the investigation of the polymer miscibility. To compare by NRET the actual degree of miscibility of the PVC/s.PMMA, PVC/PCL, and PVC/SAN polymer pairs, each polymer is to be labeled with a fluorescent chromophore to an extent of 1 or 2 mol %. This paper reports efficient pathways to attach anthracene (acceptor) or naphthalene (donor) onto preformed PVC, s.PMMA, and SAN samples. All the attempts for grafting carbazole (donor) moieties have failed, as well as any labeling of PCL whatever the nature of the chromophore.     

FTIR studies of PVC/PMMA blend based polymer electrolytes

The polymer electrolytes composing of the blend of polyvinyl chloride-polymethyl methacrylate (PVC/PMMA) with lithium triflate (LiCF3SO3) as salt, ethylene carbonate (EC) and dibutyl phthalate (DBP) as plasticizers and silica (SiO2) as the composite filler were prepared. FTIR studies confirm the complexation between PVC/PMMA blends. The CCl stretching mode at 834 cm-1 for pure PVC is shifted to 847 cm-1 in PVC-PMMA-LiCF3SO3 system. This suggests that there is interaction between Cl in PVC with Li+ ion from LiCF3SO3. The band due to OCH3 at 1150 cm-1 for PVC-PMMA blend is shifted to 1168 cm-1 in PVC-PMMA-LiCF3SO3 system. This shift is expected to be due to the interaction between Li+ ion and the oxygen atom in PMMA. The symmetric vibration band and the asymmetric vibration band of LiCF3SO3 at 1033 and 1256 cm-1 shifted to 1075 and 1286 cm-1 in the DBP-EC plasticized PVC-PMMA-LiCF3SO3 complexes. The interaction between Li+ ions and SiO2 will lead to an increase in the number of free plasticizers (which does not interact with Li+ ions). When the silica content increases from 2% to 5%, the intensity of the peak at 896 cm-1 (due to the ring breathing vibration of free EC) increases in PVC-PMMA-LiCF3SO3-DBP-EC system.     

一些含氮杂环的脱氢松香酸甲酯衍生物的合成

以歧化松香为原料,将其纯化得到脱氢松香酸,用硫酸二甲酯酯化后,通过12位溴代、7位氧化、脱异丙基硝化等步骤,得到了3个重要的中间体.该3个中间体分别经过亲核取代、还原关环反应后,得到了一些脱氢松香酸甲酯含氮杂环衍生物;产物结构经红外光谱、核磁共振谱、质谱和元素分析进行了表征.     

Preparation of a spirooxazine grafted PMMA and its photochromic properties

A novel spirooxazine (SO) compound was designed and synthesized. Macromolecular materials, called SO-g-hPMMAs (where the g means grafting and the h means partial hydrolysis), were prepared using PMMA (polymethylmethacrylate) with different degrees of hydrolysis. SO-g-5%hPMMA was prepared by reacting SO-containing active C-Br bonds with 5% partially hydrolyzed PMMA. The SO was characterized using ¹H NMR and infrared. Beyond that, photochromic properties were studied in detail. We discuss the effects of hydrochloric acids and hPMMAs of different hydrolysis degrees on photochromic properties of SO-g-hPMMA. Additionally, mechanical properties of the material were studied. Results indicate that the colored ring-opening form (PMC) of SO-g-hPMMA exhibits a good performance in terms of thermal stability, in contrast to the homologous SO. Experiments additionally demonstrate that hydrochloric acid improves the PMC’s thermal stability. SO-g-9%hPMMA demonstrated a good performance of photochromic properties compared to those with different degrees of hydrolysis.     

Preparation of Latexes with Poly(Methyl Methacrylate) Cores and Hydrophilic Polymer Shells Containing Amino Groups

Abstract

Functional latexes with poly(methyl methacrylate) (PMMA) cores and amino‐containing, water‐soluble polymer shells were synthesized via direct graft copolymerization of methyl methacrylate from water‐soluble polymers induced by a small amount of tert‐butyl hydroperoxide (TBHP) at 80°C for 2 h. Amphiphilic graft copolymers and PMMA homopolymers were generated concurrently to form highly monodispersed latexes. The effects of water‐soluble polymer containing different amino group, reaction temperature, TBHP concentration, molecular weight of the polymer and pH of the solution on conversion and grafting efficiency of the monomer and particle size were investigated. Transmission electron microscopic images of the PMMA/poly(ethyleneimine) (PEI) and PMMA/poly(allylamine) (PAA) particles clearly show well‐defined core‐shell morphologies, where PMMA cores are coated with either PEI or PAA shell. The amino‐containing polymer shells were also confirmed with zeta‐potential measurements. Furthermore, the amino‐containing latexes can be produced with a solids content up to 22 wt.%. Thus, this method provides a commercially viable route to functional latexes.     

表面自由基链转移反应制备聚合物修饰的固定相

 利用巯丙基修饰硅胶的自由基链转移反应 ,在硅胶表面原位引发自由基聚合 ,制备了聚甲基丙烯酸甲酯修饰的反相高效液相固定相。通过红外吸收光谱 (FTIR)、拉曼光谱、热失重 (TGA)和元素分析对该固定相进行了表征。该固定相对含氧芳香化合物、多环芳烃等均有良好的分离能力。     

A controlled approach to iron oxide nanoparticles functionalization for magnetic polymer brushes

In this article, we report a detailed study of surface modification of magnetite nanoparticles by means of three different grafting agents, functional for the preparation of magnetic polymer brushes. 3-Aminopropyltriethoxysilane (APTES), 3-chloropropyltriethoxysilane (CPTES), and 2-(4-chlorosulfonylphenyl)ethyltrichlorosilane (CTCS) were chosen as grafting models through which a wide range of polymer brushes can be obtained. By means of accurate thermogravimetric analysis a good control over the amount of immobilized molecules is achieved, and optimal operating conditions for each grafting agent are consequently determined. Graft densities ranging from approximately 4 to 7 molecules per nm(2) are obtained, depending on the conditions used. In addition, the surface-initiated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) carried out with CTCS-coated nanoparticles is presented as an example of polymer brushes, leading to a well-defined and dense polymeric coating of around 0.6 PMMA chains per nm(2).     

Characterization of patterned poly(methyl methacrylate) brushes under various structures upon solvent immersion

In this paper we describe a graft polymerization/solvent immersion method for generating various patterns of polymer brushes. We used a very-large-scale integration (VLSI) process and oxygen plasma system to generate well-defined patterns of polymerized methyl methacrylate (MMA) on patterned Si(1 0 0) surfaces through atom transfer radical polymerization (ATRP). After immersion of wafers presenting lines of these PMMA brushes in water and tetrahydrofuran, we observed mushroom- and brush-like regimes through grafting densities and surface coverages, respectively, for the PMMA brushes with various pattern resolutions. In the mushroom-like regime, the distance between lines of PMMA brushes was smaller than that of the lines patterned lithographically on the wafer; in the brush-like regime, this distance was approximately the same. This new strategy allows polymer brushes to be prepared through graft polymerization and then have their patterns varied through solvent immersion.     

Improvements of properties of asphalt by poly(methyl methacrylate) additives

This article presents the effect of adding poly(methyl methacrylate) (PMMA) with different molecular weights on the mechanical properties of asphalt in terms of durability, strength, and resistance to rutting. By controlling the time of reaction we obtained PMMA of two different molecular weights: PMMA1 and PMMA2. The ageing properties of polymer modified asphalts were studied using the thin film over (oven) a test. A hot storage stability test was carried out for polymer modified binder. The physical properties of asphalt modified with PMMA including penetration value and softening point were examined at two different temperatures. Resilient modulus test was evaluated by a Universal Testing Machine. Results showed that an incorporation of PMMA into asphalt binder has significantly improved its properties under studies. Indirect tensile strength test and durability performance of the modified asphalts was evaluated as well. The resulted modification was found to be dependent on the polymer molecular weight. The PMMA1 exhibited effective and cheerful results.