Study of matrix and polymer substrate in MALDI-TOF mass spectrometry of DNA

Protein matrices such as 3,5-dimethoxy-4-hydroxycinnamic acid (sinapinic acid, SA) and a-cyano-4-hydroxycinnamic acid (CHCA) tend to yield homogeneous dried spots. However, well known MALDI matrices for single- and double-stranded DNA such as 3-hydroxy picolinic acid (HPA) and picolinic acid (PA) forms the crystals at the rim of their spots with uneven distribution of matrix and DNA. This inhomogeneous deposition of DNA-doped matrix crystals at the MALDI spot requires a search for sweet spots. It is important to obtain homogeneous MALDI spots that yield signals not only from the periphery but the entire spot for automated, high throughput MALDI-TOF analysis of short DNA fragments. We have investigated the characteristics of MALDI matrices for DNA and presented a method for improving the homogeneity of MALDI samples by using polymer substrates such as linear polyacrylamide (LPA), poly(ethylene oxide) (PEO), methyl cellulose (MC) and Nafion.     

MALDI-TOF and MALDI-FTICR imaging mass spectrometry of methamphetamine incorporated into hair

A new approach is described for imaging mass spectrometry (IMS) of methamphetamine (MA) incorporated into human hair using matrix-assisted laser desorption/ionization (MALDI)-time-of-flight (TOF) and MALDI-Fourier transform ion cyclotron resonance (FTICR). A longitudinal section of a lengthwise manually-cut single human hair shaft from a chronic MA user was directly analyzed by MALDI-TOF-IMS after deposited with α-Cyano-4-hydroxycinnamic acid matrix. A barcode-like image, which was most probably generated with repeated intakes of MA, was for the first time obtained by monitoring MA-specific product ion in the selected reaction monitoring mode. Laser beam scan lengthwise-cut hair shafts gave only poor mass spectra of MA, probably due to the loss of MA and/or the thermal denaturation of hair. The identity of MA detected in hair was further confirmed by MALDI-FTICR mass spectrometry. A combination with ultra-high resolution mass spectrometry by FTICR provided indisputable identification of MA. The MALDI-FTICR-IMS of another hair shaft from the same MA user also provided a barcode-like image by monitoring the protonated molecule of MA with ultra-high resolution. The two barcode-like images exhibited a close resemblance. Thus, MALDI-IMS can offer a new perspective: 'imaging hair analyses for drugs'.     

Characterization of natural wax esters by MALDI-TOF mass spectrometry

The applicability of matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS) to the analysis of wax esters (WEs) was investigated. A series of metal salts of 2,5-dihydroxybenzoic acid (DHB) was synthesized and tested as possible matrices. Alkali metal (Li, Na, K, Rb, Cs) and transition metal (Cu, Ag) salts were studied. The matrix properties were evaluated, including solubility in organic solvents, threshold laser power that should be applied for successful desorption/ionization of WEs, the nature of the matrix ions and the mass range occupied by them, and the complexity of the isotope clusters for individual metals. Lithium salt of dihydroxybenzoic acid (LiDHB) performed the best and matrices with purified lithium isotopes ((6)LiDHB or (7)LiDHB) were recommended for WEs. Three sample preparation procedures were compared: (1) mixing the sample and matrix in a glass vial and deposition of the mixture on a MALDI plate (Mix), (2) deposition of sample followed by deposition of matrix (Sa/Ma), and (3) deposition of matrix followed by deposition of sample (Ma/Sa). Morphology of the samples was studied by scanning electron microscopy. The best sample preparation technique was Ma/Sa with the optimum sample to matrix molar ratio 1 : 100. Detection limit was in the low picomolar range. The relative response of WEs decreased with their molecular weight, and minor differences between signals of saturated and monounsaturated WEs were observed. MALDI spectra of WEs showed molecular adducts with lithium [M + Li](+). Fragments observed in postsource decay (PSD) spectra were related to the acidic part of WEs [RCOOH + Li](+) and they were used for structure assignment. MALDI with LiDHB was used for several samples of natural origin, including insect and plant WEs. A good agreement with GC/MS data was achieved. Moreover, MALDI allowed higher WEs to be analyzed, up to 64 carbon atoms in Ginkgo biloba leaves extract.     

Decellularization of intact tissue enables MALDI imaging mass spectrometry analysis of the extracellular matrix

Matrix‐assisted laser desorption/ionization imaging mass spectrometry (MALDI IMS) is a powerful molecular mapping technology that offers unbiased visualization of the spatial arrangement of biomolecules in tissue. Although there has been a significant increase in the number of applications employing this technology, the extracellular matrix (ECM) has received little attention, likely because ECM proteins are mostly large, insoluble and heavily cross‐linked. We have developed a new sample preparation approach to enable MALDI IMS analysis of ECM proteins in tissue. Prior to freezing and sectioning, intact tissues are decellularized by incubation in sodium dodecyl sulfate. Decellularization removes the highly abundant, soluble species that dominate a MALDI IMS spectrum while preserving the structural integrity of the ECM. In situ tryptic hydrolysis and imaging of tryptic peptides are then carried out to accommodate the large sizes of ECM proteins. This new approach allows the use of MALDI IMS for identification of spatially specific changes in ECM protein expression and modification in tissue. Copyright © 2015 John Wiley & Sons, Ltd.     

Direct analysis of drug candidates in tissue by matrix-assisted laser desorption/ionization mass spectrometry

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) has been used to directly analyze and image pharmaceutical compounds in intact tissue. The anti-tumor drug SCH 226374 was unambiguously determined in mouse tumor tissue using MALDI-QqTOFMS (QSTAR) by monitoring the dissociation of the protonated drug at m/z 695.4 to its predominant fragment at m/z 228.1. A second drug, compound A, was detected in slices of rat brain tissue following oral administration with doses ranging from 1-25 mg/kg. Quantitation of compound A from whole brain homogenates using routine high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS) procedures revealed that concentrations of the drug in whole brain varied from a low of 24 ng/g to a high of 1790 ng/g. The drug candidate was successfully detected by MALDI-QqTOF in samples from each dose, covering a range of approximately two orders of magnitude. In addition, good correlation was observed between the MALDI-QqTOFMS intensities at each dose with the HPLC/MS/MS results. Thus the MALDI-MS response is proportional to the amount of drug in tissue. Custom software was developed to facilitate the imaging of small molecules in tissue using the MALDI-QqTOF mass spectrometer. Images revealing the spatial localization of SCH 226374 in tumor tissue and compound A in brain tissue were acquired.     

Technical innovations for the automated identification of gel-separated proteins by MALDI-TOF mass spectrometry

The combination of gel-based two-dimensional protein separations with protein identification by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) is the workhorse for the large-scale analyses of proteomes. Such high-throughput proteomic approaches require automation of all post-separation steps and the in-gel digest of proteins especially is often the bottleneck in the protein identification workflow. With the objective of reaching the same high performance of manual low-throughput in-gel digest procedures, we have developed a novel stack-type digestion device and implemented it into a commercially available robotic liquid handling system. This modified system is capable of performing in-gel digest, extraction of proteolytic peptides, and subsequent sample preparation for MALDI-MS without any manual intervention, but with a performance at least identical to manual procedures as indicated on the basis of the sequence coverage obtained by peptide mass fingerprinting. For further refinement of the automated protein identification workflow, we have also developed a motor-operated matrix application device to reproducibly obtain homogenous matrix preparation of high quality. This matrix preparation was found to be suitable for the automated acquisition of both peptide mass fingerprint and fragment ion spectra from the same sample spot, a prerequisite for high confidence protein identifications on the basis of peptide mass and sequence information. Due to the implementation of the stack-type digestion device and the motor-operated matrix application device, the entire platform works in a reliable, cost-effective, and sensitive manner, yielding high confidence protein identifications even for samples in the concentration range of as low as 100 fmol protein per gel plug.      

MALDI-TOF mass spectrometry of a combinatorial peptide library: effect of matrix composition on signal suppression

The effect of matrix composition on signal suppression caused by a dominant compound under MALDI ionization was studied using the combinatorial TQTXT pentapeptide library as a model system. The peptide library is composed of 19 components with all proteinogenic amino acids except cysteine in position X. From these compounds, only the Arg peptide (TQTRT) was detected with sufficient intensity in the MALDI-TOF mass spectrum under typical MALDI conditions (CCA matrix). The analysis of a set of compounds utilized as different matrix components, additives and a cationizing agent revealed that the composition of the matrix is a critical point in signal suppression. Highly improved ion yields were achieved by using a CCA/DHB mixture as a matrix. The addition of K(+) as a cationizing agent to the CCA matrix resulted in MALDI-TOF mass spectra with relative ion intensities very similar to those obtained by electrospray ionization.     

Myofiber metabolic type determination by mass spectrometry imaging

Matrix assisted laser desorption/ionization (MALDI) mass spectrometry imaging is a powerful tool that opens new research opportunities in the field of biology. In this work, predictive model was developed to discriminate metabolic myofiber types using the MALDI spectral data. Rat skeletal muscles are constituted of type I and type IIA fiber, which have an oxidative metabolism for glycogen degradation, and type IIX and type IIB fiber which have a glycolytic metabolism, present in different proportions according to the muscle function and physiological state. So far, myofiber type is determined by histological methods that are time consuming. Thanks to the predictive model, we were able to predict not only the metabolic fiber type but also their location, on the same muscle section that was used for MALDI imaging. Copyright © 2017 John Wiley & Sons, Ltd.     

Analysis of erlotinib and its metabolites in rat tissue sections by MALDI quadrupole time-of-flight mass spectrometry

A qualitative and quantitative analysis of erlotinib (RO0508231) and its metabolites was carried out on rat tissue sections from liver, spleen and muscle. Following oral administration at a dose of 5 mg/kg, samples were analyzed by matrix-assisted laser desorption ionization (MALDI) with mass spectrometry (MS) using an orthogonal quadrupole time-of-flight instrument. The parent compound was detected in all tissues analyzed. The metabolites following drug O-dealkylation could also be detected in liver sections. Sinapinic acid (SA) matrix combined with the dried-droplet method resulted in better conditions for our analysis on tissues. Drug quantitation was investigated by the standard addition method and liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis on the tissue extracts. The presence of the parent compound and of its O-demethylated metabolites was confirmed in all tissue types and their absolute amounts calculated. In liver the intact drug was found to be 3.76 ng/mg tissue, while in spleen and muscle 6- and 30-fold lower values, respectively, were estimated. These results were compared with drug quantitation obtained by whole-body autoradiography, which was found to be similar. The potential for direct quantitation on tissue sections in the presence of an internal standard was also investigated using MALDI-MS. The use of alpha-cyano-4-hydroxycinnamic acid (CHCA) as the matrix resulted in better linearity for the calibration curves obtained with reference solutions of the drug when compared to SA, but on tissue samples no reliable quantitative analysis was possible owing to the large variability in the signal response. MS imaging experiments using MALDI in MS/MS mode allowed visualizing the distribution of the parent compound in liver and spleen tissues. By calculating the ratio between the total ion intensities of MS images for liver and spleen sections, a value of 6 : 1 was found, which is in good agreement with the quantitative data obtained by LC-MS/MS analysis.     

黄体酮红外光谱的溶剂效应

报道在12种极性或非极性溶剂中黄体酮红外光谱的溶剂诱导频率效应（SIFS）。结果表明：黄体酮C3位和C20位羰基的伸缩振动频率均与溶剂AN值相关良好，与溶剂极性参数Y和极化率参数Π相关较差。其羰基频率主要受溶剂与溶质间的氢键及空间效应影响。     

Direct tissue analysis using matrix-assisted laser desorption/ionization mass spectrometry: practical aspects of sample preparation

Practical guidelines for the preparation of tissue sections for direct analysis by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry are presented. Techniques for proper sample handling including tissue storage, sectioning and mounting are described. Emphasis is placed on optimizing matrix parameters such as the type of matrix molecule used, matrix concentration, and solvent composition. Several different techniques for matrix application are illustrated. Optimal instrument parameters and the necessity for advanced data analysis approaches with regards to direct tissue analysis are also discussed.     

Characterization of end groups in nylon 6 by MALDI-TOF mass spectrometry

Four samples of Ny6, each terminated by different end groups, i.e., diamino terminated, monoamino terminated (monocapped), dicarboxyl terminated, and amino-carboxyl terminated, were synthesized and analyzed by MALDI-TOF Mass Spectrometry, in order to accurately characterize their structure by direct identification of mass resolved chains. A self-calibrating method for the MALDI-TOF mass spectra of polymeric samples was used in order to distinguish the end groups existing in the four samples of Ny6. The MALDI-TOF spectra showed the presence of protonated, sodiated, and potassiated ions that were assigned to Ny6 chains containing the expecteted end groups. Furthermore, the MALDI-TOF spectra made possible the simultaneous detection of the cyclic oligomers of Ny6 present in these samples, thus achieving the full structural characterization of the molecular species present in these polyamides. © 1996 John Wiley & Sons, Inc.     

Monitoring time‐dependent degradation of phospholipids in sectioned tissues by MALDI imaging mass spectrometry

Imaging mass spectrometry (IMS) is useful for visualizing the localization of phospholipids on biological tissue surfaces creating great opportunities for IMS in lipidomic investigations. With advancements in IMS of lipids, there is a demand for large‐scale tissue studies necessitating stable, efficient and well‐defined sample handling procedures. Our work within this article shows the effects of different storage conditions on the phospholipid composition of sectioned tissues from mouse organs. We have taken serial sections from mouse brain, kidney and liver thaw mounted unto ITO‐coated glass slides and stored them under various conditions later analyzing them at fixed time points. A global decrease in phospholipid signal intensity is shown to occur and to be a function of time and temperature. Contrary to the global decrease, oxidized phospholipid and lysophospholipid species are found to increase within 2 h and 24 h, respectively, when mounted sections are kept at ambient room conditions. Imaging experiments reveal that degradation products increase globally across the tissue. Degradation is shown to be inhibited by cold temperatures, with sample integrity maintained up to a week after storage in ?80 °C freezer under N₂ atmosphere. Overall, the results demonstrate a timeline of the effects of lipid degradation specific to sectioned tissues and provide several lipid species which can serve as markers of degradation. Importantly, the timeline demonstrates oxidative sample degradation begins appearing within the normal timescale of IMS sample preparation of lipids (i.e. 1–2 h) and that long‐term degradation is global. Taken together, these results strengthen the notion that standardized procedures are required for phospholipid IMS of large sample sets, or in studies where many serial sections are prepared together but analyzed over time such as in 3‐D IMS reconstruction experiments. Copyright © 2014 John Wiley & Sons, Ltd.     

Uncovering matrix effects on lipid analyses in MALDI imaging mass spectrometry experiments

The specific matrix used in matrix‐assisted laser desorption/ionization imaging mass spectrometry (MALDI IMS) can have an effect on the molecules ionized from a tissue sample. The sensitivity for distinct classes of biomolecules can vary when employing different MALDI matrices. Here, we compare the intensities of various lipid subclasses measured by Fourier transform ion cyclotron resonance (FT‐ICR) IMS of murine liver tissue when using 9‐aminoacridine (9AA), 5‐chloro‐2‐mercaptobenzothiazole (CMBT), 1,5‐diaminonaphthalene (DAN), 2,5‐Dihydroxyacetophenone (DHA), and 2,5‐dihydroxybenzoic acid (DHB). Principal component analysis and receiver operating characteristic curve analysis revealed significant matrix effects on the relative signal intensities observed for different lipid subclasses and adducts. Comparison of spectral profiles and quantitative assessment of the number and intensity of species from each lipid subclass showed that each matrix produces unique lipid signals. In positive ion mode, matrix application methods played a role in the MALDI analysis for different cationic species. Comparisons of different methods for the application of DHA showed a significant increase in the intensity of sodiated and potassiated analytes when using an aerosol sprayer. In negative ion mode, lipid profiles generated using DAN were significantly different than all other matrices tested. This difference was found to be driven by modification of phosphatidylcholines during ionization that enables them to be detected in negative ion mode. These modified phosphatidylcholines are isomeric with common phosphatidylethanolamines confounding MALDI IMS analysis when using DAN. These results show an experimental basis of MALDI analyses when analyzing lipids from tissue and allow for more informed selection of MALDI matrices when performing lipid IMS experiments.     

Direct analysis of alkaloid profiling in plant tissue by using matrix-assisted laser desorption/ionization mass spectrometry

A method for the direct determination of alkaloid profiling in plant tissues by using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was developed. The alkaloid profiles of the herbs were obtained without the need for complicated sample preparation. Experimental results demonstrated that the direct MALDI-TOFMS analysis allowed rapid and reliable characterization of the components in plant tissues. Four commonly used Chinese medicinal herbs were studied, including Aconitum Carmichaeli Debx. (Fuzi in Chinese) and Processed Fuzi, for herb differentiation and explanation of the significant difference in their toxicities. The direct analysis method proved valuable for the preliminary study of plant component profiles. The rapid collection of information from the direct analysis on plant tissues could be valuable for supporting the discovery of new compounds and for the quality control of medicinal herbs.     

Allergenic compounds on the inner and outer surfaces of natural latex gloves: MALDI mass spectrometry and imaging of proteinous allergens

Natural latex gloves are the cause of a severe health problem to an increasing number of healthcare workers or patients due to the presence of protein allergens as Hevein or Rubber Elongation Factor (REF). One of the most challenging problems is the in situ localization of theses allergens in, e.g. gloves, to estimate the allergenic potential of the latex material. A sample preparation protocol applying a binary matrix-assisted laser desorption/ionization(MALDI) matrix containing alpha-cyano-4-hydroxy cinnamic acid (CHCA) and 2,5-dihydroxy benzoic acid (DHB) on trifluoro acetic acid (TFA) etched latex glove surfaces allowed the direct determination (exact molecular weight) of Hevein, REF and a truncated form of REF (tREF) within nine different brands of natural latex gloves by means of MALDI-TOF-MS in the linear mode. MALDI mass spectrometry demonstrated that Hevein, tREF and REF were present on the inner surfaces (in direct contact with the skin) of many, but not all, investigated gloves without any prior extraction procedure. Additionally, different isoforms of the allergen Hevein were detected (exhibiting ragged C-termini). tREF and REF could always be detected beside each other, but were not observed on every latex glove sample, which contained Hevein. It was also demonstrated that there is a significant difference in terms of proteins and polymers between inner and outer surfaces of gloves, which helps to explain the different allergenic potential of these.MALDI imaging allowed for the first time the unambiguous localization of all three allergens in parallel and showed that Hevein was present on 36% of the investigated area of a latex glove with a certain localization, whereupon, tREF and REF were only found on 25% of the investigated material.     

Mapping the fly Malpighian tubule lipidome by imaging mass spectrometry

Matrix‐assisted laser/desorption ionization imaging mass spectrometry (MALDI IMS) is an analytical technique for understanding the spatial distribution of biomolecules across a sample surface. Originally employed for mammalian tissues, this technology has been adapted to study specimens as diverse as microbes and cell cultures, food such as strawberries, and invertebrates including the vinegar fly Drosophila melanogaster. As an ideal model organism, Drosophila has brought greater understanding about conserved biological processes, organism development, and diseased states and even informed management practices of agriculturally and environmentally important species. Drosophila displays anatomically separated renal (Malpighian) tubules that are the physiological equivalent to the vertebrate nephron. Insect Malpighian tubules are also responsible for pesticide detoxification. In this article, we first describe an effective workflow and sample preparation method to study the phospholipid distribution of the Malpighian tubules that initially involves the manual microdissection of the tubules in saline buffer followed by a series of washes to remove excess salt and enhances the phospholipid signals prior to matrix deposition and IMS at 25‐μm spatial resolution. We also established a complementary methodology for lipid IMS analysis of whole‐body fly sections using a dual‐polarity data acquisition approach at the same spatial resolution after matrix deposition by sublimation. Both procedures yield rich signal profiles from the major phospholipid classes. The reproducibility and high‐quality results offered by these methodologies enable cohort studies of Drosophila through MALDI IMS.     

Self-assembled-monolayer-modified silicon substrate to enhance the sensitivity of peptide detection for AP-MALDI mass spectrometry

A self-assembled-monolayer-modified silicon substrate was successfully used to enhance the sensitivity of peptide detection for atmospheric pressure-matrix-assisted laser desorption/ionization mass spectrometry (AP-MALDI/MS). The effect of surface modification of silicon wafer samples with NH(2) and OH functional groups was investigated. In addition, solvent effects for the preparation of modified NH(2)-functionalized surfaces were examined. The sensitivities for the two peptides were significantly improved, increasing between 12 and 160 times, for bradykinin and gramicidin, respectively, on an NH(2)-modified silicon surface prepared in toluene, over that on a conventional gold substrate. The limits of detection (LODs) for bradykinin and gramicidin using the conventional gold substrate in AP-MALDI/MS experiments were > 0.011 microM and 110 microM, respectively. Using our SAM approach, the LODs for bradykinin and gramicidin in AP-MALDI/MS can be improved to 0.93 nM and 0.33 microM, respectively. This SAM approach for AP-MALDI/MS is simple and sensitive, and can be used for high-throughput analysis.     

Solvent properties governing protein partitioning in polymer/polymer aqueous two-phase systems

Distribution coefficients of various proteins were measured in aqueous Dextran-Ficoll, Dextran-PES, and Ficoll-PES two-phase systems, containing 0.15M NaCl in 0.01 M phosphate buffer, pH 7.4. The acquired data were combined with data for the same proteins in different systems reported previously and known solvatochromic solvent properties of the systems to characterize the protein-solvent interactions. The relative susceptibilities of proteins to solvent dipolarity/polarizability, solvent hydrogen bond acidity, solvent hydrogen bond basicity, and solvent ability to participate in ion-ion and ion-dipole interactions were characterized. These parameters, which are representative of solute-solvent interactions, adequately described the partitioning of the proteins in each system. It was found that the relative susceptibilities of proteins to solvent dipolarity/polarizability are interrelated with their relative susceptibilities to solvent hydrogen bond acidity and solvent hydrogen bond basicity similarly to those established previously for small nonionic organic compounds.