TE10矩形波导中填充金属线阵和铁氧体合成的新型左手媒质

在TE₁₀矩形波导中填充金属线阵和铁氧体合成了一种新型的左手媒质结构.分别使用了转移函数矩阵方法以及全波仿真工具Ansoft HFSS对所提出的结构进行了分析.结果表明,在横向磁化铁氧体等效磁导率实部为负的频段范围内,该合成结构呈现左手通带特性并伴随着后向波的传播现象.由于横向磁化铁氧体的等效磁导率为负的频段范围可调,故所提出的结构具有左手通带范围可调的特性. 关键词： 左手媒质 10矩形波导')" href="#">TE₁₀矩形波导 金属线阵 铁氧体     

Characteristics of photoluminescence, thermoluminescence and thermal degradation in Eu-doped BaMgAl10O17 and SrMgAl10O17

The relation between photoluminescence and thermoluminescence from Eu-doped BAM (BaMgAl₁₀O₁₇) and SAM (SrMgAl₁₀O₁₇) are investigated. The emission peak of SAM:Eu shifts from 463 to 489 nm whereas that of BAM:Eu only shifts 3 nm at 450 nm as temperature decreased from 300 to 50 K under 146 nm excitation. This can be explained by the fact that there are Beevers–Ross (BR) and mid-oxygen (mO) sites for Eu ions in SAM. The emission peak around 463 nm from SAM:Eu is ascribed to Eu ions in the mO site, while the peak around 489 nm is ascribed to ones in the BR site in SAM host. From the result of thermal degradation of SAM:Eu, it is confirmed that the Eu ions located at mO site are easy to degrade compared with those located at BR site. The thermal degradation of BAM:Eu phosphor becomes large with the increase in Eu concentration. We suggest that the thermal degradation of BAM:Eu phosphor is due to the tendency of Eu ions to occupy the mO site.     

Characterization of host-lattice emission and energy transfer in BaMgAl10O17:Eu

Host-lattice emission, energy transfer and degradation processes are characterized in undoped and Eu-doped BaMgAl₁₀O₁₇. Undoped BaMgAl₁₀O₁₇ exhibits a broad emission centered at 265 nm when excited at wavelengths shorter than 190 nm. This emission is assigned to exciton recombination at Ba-O groups in the cation layer of the lattice. The emission exhibits excellent overlap with the excitation band of Eu²⁺ in this host, providing a means of host-to-activator energy transfer in the doped phosphor. The exciton emission is relatively stable to thermal damage, but undergoes a peak shift and significant decrease in intensity after exposure to VUV radiation. Heating of VUV-damaged materials in air leads to some repair of the spectral properties.     

Pb2，PdPb2分子的势能函数

采用Gaussian 98程序,运用B3LYP方法,对Pd和Pb原子采用收缩价基组LANL2DZ,对Pb₂和PdPb₂分子的微观结构进行了理论计算. 由于Pb₂分子离解后一个Pb原子处于基态,另一个Pb原子处于激发态,采用最小二乘法拟合Pb₂分子的势能函数,选用的函数形式为Murrell-Sorbie势能函数加上开关函数. 使用多体展式理论导出了势函数中的参数进而给出PdPb₂分子基态势函数的解析表达式,其势能面准确地复现了PdPb₂分子的两个稳定构型(C_2V和C_∞v)及其能量关系. 关键词： 2')" href="#">Pb₂ 2')" href="#">PdPb₂ 势能函数     

Electron paramagnetic resonance parameters and local structure for Gd3+ in KY3F10

The electron paramagnetic resonance parameters, zero-field splittings (ZFSs) b₂⁰, b₄⁰, b₄⁴, b₆⁰, b₆⁴ and the g factors for Gd³⁺ on the tetragonal Y³⁺ site in KY₃F₁₀ are theoretically studied from the superposition model for the ZFSs and the approximation formula for the g factor containing the admixture of the ground ⁸S_7/2 and the excited ⁶L_7/2 (L=P, D, F, G) states via the spin-orbit coupling interactions, respectively. By analysing the above ZFSs, the local structure information for the impurity Gd³⁺ is obtained, i.e., the impurity-ligand bonding angles related to the four-fold (C₄) axis for the impurity Gd³⁺ center are found to be about 0.6° larger than those for the host Y³⁺ site in KY₃F₁₀. The calculated ZFSs based on the above angular distortion as well as the g factors are in reasonable agreement with the observed values. The present studies on the ZFSs and the local structure would be helpful to understand the optical and magnetic properties of this material with Gd dopants.      

8mm TE13 Mode Gyrotron

The design of a 8mm TE ₁₃ mode gyrotron is given in this paper. Discussions about the selection of the dimensions of the RF structure and electron gun are presented. Calculated results of the operating parameters of the gyrotron are also given. At 37.5GHz, pulse power 56kW is obtained for the gyrotron manufactured according to our design. Mode pattern obtained by scorching method shows that the mode of the output millimeter wave is TE ₁₃.     

Effect of the incident electron fluence on the electron emission yield of polycrystalline Al2O3

The electron emission yield due to electron impact on polycrystalline Al₂O₃ is measured with a technique based on the use of a Kelvin probe (KP method) and a pulsed electron beam. The KP method allows the clear discrimination between the external effects of charging and internal ones. The effect of the incident electron fluence on the yield in the region where the yield is higher than one is investigated. An overall drop of the electron emission yield with increasing the electron fluence is observed. This result is clearly associated to the internal effects of positive charging. Indeed, the recombination of the generated secondary electrons with the accumulated holes beneath the irradiated surface leads to the decrease of their mean free path and to the decay of the secondary electron emission yield.     

Low voltage electron induced cathodoluminescence degradation and surface characterization of Sr3(PO4)2:Tb phosphor

Tb³⁺-doped Sr₃(PO₄)₂ phosphor was prepared by a sol-gel combustion method. A trigonal structure having Sr and O atoms occupying two different lattice sites were obtained. Scanning Auger nanoprobe was used to analyze the morphology of the particles. Photoluminescence (PL) and cathodoluminescence (CL) properties of Sr₃(PO₄)₂:Tb powder phosphors were evaluated and compared. In addition, the CL intensity degradation of Sr₃(PO₄)₂:Tb was evaluated when the powders were irradiated with a beam of electrons in a vacuum chamber maintained at an O₂ pressure of 1 × 10⁻⁶ Torr or a background pressure of 1 × 10⁻⁸ Torr O₂. The surface chemical composition of the degraded powders, analyzed by X-ray photoelectron spectroscopy (XPS), suggests that new compounds (metal oxides) of strontium and phosphorous were formed on the surface. It is most likely that these compounds contributed to the CL intensity degradation of the Sr₃(PO₄)₂:Tb phosphors. The CL properties and possible mechanism by which the new metal oxides were formed on the surface due to a prolonged electron beam irradiation are discussed.     

Output mode characteristics of an in-phase locked gain waveguide array CO2 laser

In this paper,experimental and theoretical studies of the output mode characteristics of an in-phase locked gain waveguide array CO 2 laser are reported.The experimental results of the optical oscillation mode frequency,the far-field intensity distribution and the burnt pattern of the sliced waveguide array laser are obtained.A revised mode expression of the rectangle waveguide,which is suited for this waveguide array CO 2 laser,is proposed.The theoretical simulation results based on the revised mode expression are shown to be in good agreement with the experimental results.     

Thermoluminescence spectroscopy of Eu and Mn doped BaMgAl10O17

Thermoluminescence (TL) studies of Eu²⁺ and Mn²⁺ doped BaMgAl₁₀O₁₇ (BAM) are reported and discussed. The TL spectra that are measured after irradiation with ultraviolet (120-) show a series of TL peaks between 100 and . The TL spectra are similar for BAM with the two dopants, which suggest that the shallow traps are typical for the BAM host lattice. Using the Hoogstraaten analysis trap depths between 0.1 and are determined. A model is proposed based on thermally activated recombination in local TL centres (not via the conduction band). Further support for this model is obtained from the observation that the TL signal is strongest for excitation around the band edge of BAM . Upon heating the samples in air all low temperature TL peaks decrease in intensity. In addition a new peak appears in the TL spectrum, which is connected with a deeper trap and also a partial oxidation of Eu²⁺ to Eu³⁺ is observed. The luminescence efficiency is lower and the UV induced degradation is faster after annealing in air. These results indicate that the shallow traps are related to oxygen vacancies. The shallow traps do not have a negative influence on performance (efficiency and degradation) of BAM as a lighting phosphor. The luminescence efficiency and stability are strongly influenced by the formation of Eu³⁺ and a deeper trap during annealing in air. Subsequent annealing in a reducing atmosphere restores the original properties.     

Synthesis of (Mg0.476Mn0.448Zn0.007)(Fe1.997Ti0.002)O4 powder and sintered ferrites by high energy ball-milling process

(Mg_0.476Mn_0.448Zn_0.007)(Fe_1.997Ti_0.002)O₄ nanocrystalline powder prepared by high energy ball-milling process were consolidated by microwave and conventional sintering processes. Phases, microstructure and magnetic properties of the ferrites prepared by different processes were investigated. The (Mg_0.476Mn_0.448Zn_0.007)(Fe_1.997Ti_0.002)O₄ nanocrystalline powder could be prepared by high energy ball-milling process of raw Fe₃O₄, MnO₂, ZnO, TiO₂ and MgO powders. Prefired and microwave sintered ferrites could achieve the maximum density (4.86 g/cm⁻³), the average grain size (15 μm) was larger than that (10 μm) prepared by prefired and conventionally sintered ferrites with pure ferrite phase, and the saturation magnetization (66.77 emu/g) was lower than that of prefired and conventionally sintered ferrites (88.25 emu/g), the remanent magnetization (0.7367 emu/g) was higher than that of prefired and conventionally sintered ferrites (0.0731 emu/g). Although the microwave sintering process could increase the density of ferrites, the saturation magnetization of ferrites was decreased and the remanent magnetization of ferrites was also increased.     

Study on the phase separation of La0.7Sr0.3MnO3 nanoparticles by electron magnetic resonance

In this work, the technique of electron magnetic resonance (EMR) is used to measure the magnetic resonant spectra of La_0.7Sr_0.3MnO₃ nanoparticles synthesized by sol–gel routes with three different gelation agents (S1: Urea+citric acid; S2: citric acid, and S3: Urea+tri-sodium citrate). The purpose of this study is to investigate the influence of synthesis conditions on the magnetic properties of nanoparticles. Our ESR results show that Curie temperatures of La_0.7Sr_0.3MnO₃ nanoparticles with different gelation agents are slightly different (T_c∼340 to 360 K) and possess both paramagnetic (PM) and ferromagnetic (FM) phases in the temperature below T_c. Besides, a sharp FM–PM transition indicates that the combined agent of Urea+tri-sodium citrate creates a better quality in CMR nanomagnets.     

Quasi-two-dimensional magnetism in (CnH2n+1NH3)2CuCl4 studied by electron paramagnetic resonance

The quasi-two-dimensional magnetism in the layered transition metal compound (C_nH_2n+1NH₃)₂CuCl₄ (n=10, 14) was investigated by means of electron paramagnetic resonance (EPR) and superconducting quantum interference device measurements. As a result, the high temperature magnetic phase transitions were reflected in the EPR parameters in a sensitive manner.     

Theoretical calculations of the optical band positions and spin-Hamiltonian parameters for Yb at the tetragonal Y site of KY3F10 crystal

The six optical band positions and six spin-Hamiltonian parameters [g factors g_∥, g_⊥ and hyperfine structure constants A_∥(¹⁷¹Yb³⁺), A_⊥(¹⁷¹Yb³⁺), A_∥(¹⁷³Yb³⁺), A_⊥(¹⁷³Yb³⁺)] for Yb³⁺ ion at the tetragonal Y³⁺ site of KY₃F₁₀ crystal are calculated from a diagonalization (of energy matrix) method. In the method, the Hamiltonian of energy matrix contains the free-ion, crystal-field interaction, Zeeman (or magnetic) interaction and hyperfine interaction terms and so a 14×14 complete energy matrix for 4f¹³ ion in tetragonal crystal-field and under an external magnetic field is constructed. Diagonalizing the energy matrix, these optical and EPR spectral data are calculated together and the calculated results are in reasonable agreement with the experimental values. The signs of hyperfine structure constants A_∥, A_⊥ for the isotopes ¹⁷¹Yb³⁺ and ¹⁷³Yb³⁺ in KY₃F₁₀ are suggested. The results are discussed.     

Double-ceramic-layer thermal barrier coatings based on La2(Zr0.7Ce0.3)2O7/La2Ce2O7 deposited by electron beam-physical vapor deposition

Double-ceramic-layer (DCL) thermal barrier coatings (TBCs) of La₂(Zr_0.7Ce_0.3)₂O₇ (LZ7C3) and La₂Ce₂O₇ (LC) were deposited by electron beam-physical vapor deposition (EB-PVD). The composition, interdiffusion, surface and cross-sectional morphologies, cyclic oxidation behavior of DCL coating were studied. Energy dispersive spectroscopy and X-ray diffraction analyses indicate that both LZ7C3 and LC coatings are effectively fabricated by a single LZ7C3 ingot with properly controlling the deposition energy. The chemical compatibility of LC coating and thermally grown oxide (TGO) layer is unstable. LaAlO₃ is formed due to the chemical reaction between LC and Al₂O₃ which is the main composition of TGO layer. Additionally, the thermal cycling behavior of DCL coating is influenced by the interdiffusion of Zr and Ce between LZ7C3 and LC coatings. The failure of DCL coating is a result of the sintering of LZ7C3 coating surface, the chemical incompatibility of LC coating and TGO layer and the abnormal oxidation of bond coat. Since no single material that has been studied so far satisfies all the requirements for high temperature applications, DCL coating is an important development direction of TBCs.     

The cold quality Qcold for magnicon on resonator in the rotating TMn10 mode

Cold quality Q_cold is an important parameter in microwave electronic tube design. Magnicon works in a rotrating TM_n10 mode in the cylindracl cavity, its field distribution is different from the static state. But up to now researchers simply assume its cold quality to be two times of the static one, which usually results in big errors. Here in this paper, based on the rotating field distribution, and using the integrated Bessel function, we deduced the cavity’s storage and the rotating field dissipated power expressions, and obtained a modified cold quality formula for rotating TM_n10 mode in the magnicon, which shows a good agreement with the experimental data. This work supported sci. & Tech. Funds of CAEP.     

Electronic energy levels of CsCdCl3

The excitation and emission spectra of CsCdCl₃ crystal grown by the Bridgman growth technique, are observed. Its dominant excitation spectra correspond to the transitions between the electronic energy levels of the face-shared [CdCl₆]⁴⁻ octahedron complexes with C_3v symmetry. With the help of the molecular orbital diagram of the [CdCl₆]⁴⁻ molecule complex, an approximate electronic energy level diagram of this crystal is constructed using one-electron approximation.     

Phase transition in Pd40Ni10Cu30P20 bulk metallic glass under HP & HT

The phase transitions in Pd₄₀Ni₁₀Cu₃₀P₂₀ bulk metallic glass (BMG) have been studied under high pressure and high temperature (HP & HT) by X-ray diffaction measurements with synchrotron radiation source. We found that the BMG underwent a phase transitions of amorphous-crystalline-amorphous at 10 GPa upon heating. The parallel experiments were carried out at 7 GPa, while we did not observe the amorphous-crystalline-amorphous transitions by increasing temperature. Quenching the melted BMG at 7 GPa, it was found that the phase crystallized from the melt differed from the primary phase crystallized from the starting amorphous solid upon heating suggesting there existed a distinct mechanism in two cases.     

The cold quality Qcold for magnicon on resonator in the rotating TMn10 mode

Cold quality Q_cold is an important parameter in microwave electronic tube design. Magnicon works in a rotrating TM_n10 mode in the cylindracl cavity, its field distribution is different from the static state. But up to now researchers simply assume its cold quality to be two times of the static one, which usually results in big errors. Here in this paper, based on the rotating field distribution, and using the integrated Bessel function, we deduced the cavity’s storage and the rotating field dissipated power expressions, and obtained a modified cold quality formula for rotating TM_n10 mode in the magnicon, which shows a good agreement with the experimental data. This work supported sci. & Tech. Funds of CAEP. Associate professor.