Novel sol–gel synthesis of N-doped TiO<Subscript>2</Subscript> hollow spheres with high photocatalytic activity under visible light

Novel ammonia and triethanolamine assisted sol–gel synthesis method was developed to fabricate the N-doped TiO₂ hollow spheres. The prepared hollow spheres were in submicron size and had good morphology and high specific surface area. Polystyrene (PS) latexes in size of 470 nm were used as the templates to fabricate PS/TiO₂ core–shell spheres. Here ammonia and triethanolamine was first employed together to control the sol–gel process. The N-doped TiO₂ hollow spheres were got after calcinations of the core–shell spheres by using triethanolamine as N source, and the amount of doped N could be easily adjusted by changing the amount of triethanolamine. The hollow spheres had distinct visible light response, and the optical response shifted more to the visible region as the amount of doped N increases. The photodegradation of methylene blue expressed the high photocatalytic activity of the N-doped TiO₂ hollow spheres under visible light.     

Synthesis and photocatalytic activity of mesoporous SiO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript>

Mesoporous SiO₂–TiO₂ was synthesized by the sol–gel method using Si(OC₂H₅)₄, Ti(OC₂H₅)₄, and stearyltrimethylammonium chloride. By using acetylacetone as the capping agent of Ti(OC₂H₅)₄, homogeneous SiO₂–TiO₂ composite was obtained. Spherical mesoporous SiO₂–TiO₂ was also synthesized by the sol–gel method using W/O emulsion under microwave irradiation. The specific surface area of these mesoporous SiO₂–TiO₂ materials decreased when the Ti/Si molar ratio was higher than 0.1, which indicated that Ti was homogeneously distributed in mesoporous SiO₂ matrix at Ti/Si ≦ 0.1. The photocatalytic activity of mesoporous SiO₂–TiO₂ materials was investigated by the degradation of methylene-blue in water under UV light irradiation. Mesoporous SiO₂–TiO₂ was effective for the adsorption–decomposition of methylene-blue.     

Template synthesis of N—F-codoped TiO<Subscript>2</Subscript> nanotubes with high visible light activity

A series of highly ordered N—F-codoped TiO₂ nanotubes were synthesized with a simple template technique and the obtained samples were detected by FE-SEM and XPS. The UV-Vis absorption spectrum showed that after N—F-codoping, TiO₂ nanotubes had a new absorption band at 425 nm, leading to a photoresponse in the visible region. These modified nanotubes showed a significant visible-induced photocatalytic activity for the degradation of methylene blue in aqueous solution.     

Enhanced photocatalytic activities of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> nanohybrids immobilized on cement-based materials for dye degradation

Using cement-based material as a matrix for photocatalytic hybrids is an important development for the large-scale application of photocatalytic technologies. In this work, photocatalytic activity of nanosized hybrids of TiO₂/SiO₂ (nano-TiO₂–SiO₂) for degradation of some organic dyes on cementitious materials was highlighted. For this purpose, an optimal inorganic sol–gel precursor was firstly applied to prepare the composites of nano-TiO₂–SiO₂ which was characterized by XRD, SEM and UV–Vis. Then, a thin layer was successfully coated on white Portland cement (WPC) blocks using a dipping process in a nano-TiO₂–SiO₂ solution. The effect of nano-TiO₂–SiO₂-coated WPC blocks on photocatalytic decomposition of three dyes, including Malachite green oxalate (MG), Methylene blue (MB) and Methyl orange (MO) were studied under UV irradiation and monitored by chemical oxygen demand tests. The results showed an increase in photocatalytic effects which depends on the structure and pH of the applied cement.     

Characterization and activity of visible light–driven TiO<Subscript>2</Subscript> photocatalysts co<Emphasis Type="Bold">-</Emphasis>doped with nitrogen and lanthanum

Nitrogen and lanthanum co-doped titania photocatalysts were prepared by a modified sol–gel process with urea and lanthanum nitrate doping precursors and characterized by various techniques including XRD, FTIR, TEM, EDS, and UV–Vis DRS. The average crystallite size was ca. 12–15 nm as calculated from XRD patterns, and anatase was the dominant crystalline type in the as-prepared samples. The UV–Vis DRS of the samples revealed significant absorption within the range of 400–500 nm. The optimum composition of N(0.020)La(0.012)TiO₂ exhibited the highest photocatalytic activity for degradation of methyl orange (MO) aqueous solution under simulated sunlight. The percent degradation of MO was ca. 97% for N(0.020)La(0.012)TiO₂ under simulated sunlight irradiation for 9 h. The enhanced photocatalytic activity was ascribed to the synergistic effects of the nitrogen and lanthanum co-doping.     

Mechanochemical reaction of TiO<Subscript>2</Subscript> with β-alanine for the preparation of visible light active nitrogen doped titania: adsorption and kinetic studies

Nitrogen doped TiO₂ (TiO_2−xN_x) with a homogenous anatase phase was synthesized, using β-alanine as a nitrogen precursor and ethanol as a oxygen depriving agent in the concentration range of 0.05, 0.10, 0.15 and 0.2 at% and were characterized by Powder X-ray Diffraction (PXRD), X-ray Photoelectron Spectra (XPS), Scanning Electron Microscope (SEM), Fourier Transform Infrared (FT-IR) and UV–visible Diffused Reflectance Spectroscopic (DRS) techniques. Ethanol deprives the surface oxygen, thereby generating oxygen defects whose concentration was evaluated by FTIR, Photoluminescence (PL) and Electron Spin Resonance (ESR) studies. FTIR analysis reveal that concentration of oxygen vacancies/defects (V_o) decreases as the nitrogen concentration increases leading to the reduction in the Ti–O bond length. This results in a shift of the IR absorption peak towards a low wave number as predicted by simple physical harmonic oscillator model. The Ti 2p_3/2 XPS spectra of TiO_2−xN_x shifts to lower binding energies due to the increase in the electron densities around the Ti atoms indicating the formation of Ti³⁺ in the doped samples. N₂ adsorption–desorption isotherms measurements show a slight increase in the Brunner–Emmet–Teller (BET) surface area, pore diameter, mesopore volume, while the crystallite size and the morphology were also effected by the nitrogen doping. The equilibrium adsorption of Toluene molecules on the photocatalyst surface follows Langmuir theory and the rate controlling step could be the surface reaction of the adsorbed Toluene molecules.     

Visible light photocatalytic activity and Photoelectrochemical property of Fe-doped TiO<Subscript>2</Subscript> hollow spheres by sol–gel method

Fe-doped TiO₂ hollow spheres (Fe-THs) were synthesized by sol–gel process using carbon spheres as templates. The prepared samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV–vis diffuse reflectance spectrum (DRS), N₂ adsorption–desorption isotherms, Electron paramagnetic resonance (EPR) spectroscopy and Photoluminescence emission spectroscopy (PL). UV–vis spectra showed that Fe³⁺ doping could extend the absorption edge to the visible region. EPR spectra showed that Fe³⁺ was incorporated into the crystal lattice of TiO₂, which could inhibit the recombination of photo-induced electron–hole pairs and improve the photocatalytic activity. The photocatalytic activities of the prepared samples were evaluated for the degradation of dye Reactive Brilliant Red X-3B (C.I. reactive red 2) under visible light irradiation. The results indicated that Fe³⁺ doping sample showed the highest photocatalytic activity with an optimal doping concentration of 0.50 wt%. The recycle ability of the Fe-THs was also investigated. After 5 cycles, the degradation rate was still higher than 90%, decreased by only 6.36% compared to the first cycle. Moreover, in order to characterize the electron-transferring efficiency in the process of photocatalysis reaction, a photocurrent-time spectrum was examined by anodic photocurrent response.     

Particulate sol–gel synthesis and optical and electrical properties of CeO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> nanocomposite

CeO₂/TiO₂ nanocomposite was synthesized by particulate sol–gel method. The X-ray diffractogram shows the presence of cubic CeO₂ and anatase TiO₂ in the composite. The high resolution scanning electron micrographs reveal the nanoparticulate nature of the prepared composite. The composite absorbs UV light and exhibits near-band gap emission corresponding to TiO₂ and deep level emission due to crystal defects. The Nyquist plot displays two semicircular arcs indicating the material heterogeneity. The physicochemical characteristics of the synthesized nanocomposite are in favour of its application as an ingredient of sunscreen formulations; under UV light the photocatalytic activity of CeO₂/TiO₂ composite, tested through the degradation of rhodamine B, is very much less than that by pristine anatase TiO₂. Reduced adsorption of moisture by the nanocomposite is a possible reason for the observed very low photocatalytic activity.     

Sol–gel synthesis and characterization of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–TiO<Subscript>2</Subscript> nanocrystalline powder

Al₂O₃–TiO₂ nanocrystalline powders were synthesized by sol–gel process. Aluminum sec-butoxide and titanium isopropoxide chemicals were used as precursors and ethyl acetoacetate was used as chelating agent. Thermal and crystallization behaviors of the precursor powders were investigated by thermal gravimetric-differential thermal analysis, Fourier-transform infrared spectrum and X-ray diffraction. The average crystalline size of heat treated Al₂O₃–TiO₂ powders at 1,100 °C is ~100 nm.     

Preparation and characterization of ZnTiO<Subscript>3</Subscript>–TiO<Subscript>2</Subscript>/pillared montmorillonite composite catalyst for enhanced photocatalytic activity

ZnTiO₃–TiO₂/organic pillared montmorillonite (pMt) composite catalyst was successfully prepared in this paper by immobilizing ZnTiO₃–TiO₂ onto pMt. The composition and texture of the prepared composite catalyst were characterized by X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, energy dispersive spectrometry, ultraviolet–visible light (UV–Vis) diffuse reflectance spectroscopy and X-ray photoelectron spectroscopy. The photocatalytic activity was tested via photocatalytic degradation of methyl blue (MB) under both visible irradiation and UV light. The results indicated that the ZnTiO₃–TiO₂/pMt composite catalyst had an apparent absorption at the area of visible irradiation, and exhibited a higher efficiency of photocatalytic degredation of MB under visible irradiation. This was due to the heterostructure of ZnTiO₃–TiO₂, and the mesoporous structure and specific surface area of the ZnTiO₃–TiO₂/pMt composite. In addition, the results of the radical scavenging experiments showed that the holes and superoxide radicals are responsible for the degradation of MB under visible irradiation.     

Preparation and activity evaluation of relative p–n junction photocatalyst Co-TiO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript>

Co-TiO₂ photocatalyst was prepared by a sol–gel method using Co(NO₃)₂ · 6H₂O and tetrabutyl titanate [Ti(OC₄H₉)₄] as raw materials, and Co-TiO₂/TiO₂ photocatalyst was synthesized by mixing the Co-TiO₂ sol with TiO₂ sol. The Co-TiO₂/TiO₂ was characterized by X-ray powder diffraction, UV–Vis diffuse reflection spectrum, scanning electron microscopy, transmission electron microscopy, fluorescence spectra and X-ray photoelectron spectroscopy. The photocatalytic activity of the photocatalyst was evaluated by photocatalytic reduction of Cr₂O₇ ²⁻ and photocatalytic oxidation of methyl orange under UV irradiation. The results showed that, for the photocatalytic reduction of Cr₂O₇ ²⁻, the optimum percentage of Co-doped for the Co-TiO₂ was 0.5% (mole ratio of Co/Ti), and the optimum percentage of Co-TiO₂ for the Co-TiO₂/TiO₂ was 2.0% (mole ratio of Co-TiO₂/TiO₂). The photocatalytic reduction activities of the Co-TiO₂/TiO₂ and Co-TiO₂ are much higher than that of TiO₂. However, the photocatalytic oxidation activities of the Co-TiO₂/TiO₂ and Co-TiO₂ are much lower than that of TiO₂. Effects of heat treatment on the photocatalytic activities of the Co-TiO₂/TiO₂ and Co-TiO₂ were investigated. The mechanisms of influence on the photocatalytic activity were also discussed.     

Coagulation and heterocoagulation interactions of components in aqueous dispersed systems microcrystalline cellulose–TiO<Subscript>2</Subscript>, microcrystalline cellulose–TiOSO<Subscript>4</Subscript>, and TiO<Subscript>2</Subscript>–TiOSO<Subscript>4</Subscript>

A procedure was developed for recovery and concentration of residual palladium(II) from a “lean” refining solution by extraction with 1Н-1,2,4-triazole derivatives. Palladium(II) is extracted quantitatively from 1 M hydrochloric acid solutions and under optimum conditions is selectively separated from platinum(IV) and rhodium(III).     

The preparation,and applications of g-C<Subscript>3</Subscript>N<Subscript>4</Subscript>/TiO<Subscript>2</Subscript> heterojunction catalysts—a review

In recent years, more and more attention has been paid in the research of heterojunction catalysts, due to their better catalytic ability than that of single component catalysts. Up to now, many kinds of heterojunction catalysts have been reported, such as Bi₂O₃/Bi₂WO₆, WO₃/BiVO₄, SnO₂/TiO₂, CdS/TiO₂, Ta₃N₅/Pt/IrO₂ and so on, among which the heterojunction catalyst composed of g-C₃N₄ and TiO₂ has been studied tremendously recently, due to the high activity, high thermal and chemical stability, and well matched energy structure of them. Up to now, many methods have been explored for the synthesis of g-C₃N₄/TiO₂ heterojunction catalysts, such as ball milling of g-C₃N₄ and TiO₂, hydrothermal growth of TiO₂ on g-C₃N₄ and so on. In this review, the recent researches on the synthesis of g-C₃N₄/TiO₂ catalysts were summarized. Moreover, the applications of g-C₃N₄/TiO₂ catalysts in the field of photocatalysis were detailedly introduced.     

Facile synthesis of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> core–shell nanobelts

We report a facile chemical approach for the synthesis of one-dimensional V₂O₅/TiO₂ core–shell nanobelts. The coated V₂O₅ nanobelts are synthesized by a hydrothermal method which is feasible for large-scale production. V₂O₅ nanobelts coated with a thin layer of TiO₂ sol are formed before sintering, and after sintering one-dimensional V₂O₅/TiO₂ core–shell nanobelts, composed of single-crystalline V₂O₅ nanobelts cores uniformly coated with anatase TiO₂ nanoparticle shells are obtained. The influences of the synthetic parameters, such as sintering temperature and titanium/vanadium mole ratios, on the morphology of the resulting products are investigated. Interestingly, the shape of single-crystalline of V₂O₅ nanobelts is totally preserved after sintering; the morphology can be readily controlled to be smooth or rough by altering the sintering temperature of the shells and titanium/vanadium mole ratio.     

The photocatalytic degradation of 17α-ethynylestradiol by pure and carbon nanotubes modified TiO<Subscript>2</Subscript> under UVC illumination

Commercial product Degussa TiO2 P25, sol-gel produced TiO₂ and TiO₂ modified by carbon nanotubes addition (5% of the TiO₂ mass) are tested as photocatalysts for the degradation of endocrine disrupting compound 17α-ethynylestradiol (1 μM aqueous solution). The molecular and crystal structure, phase composition, crystallite size, specific surface area, pore average diameter, their area and volume distribution, morphology, IR and UV/Vis spectra of the catalysts are characterized. HPLC is used for estrogen analysis. The sorption ability and photocatalytic activity (measured by degradation rate constant and percentage of the pollutant conversion) of the catalysts under UV (17 W, emission maximum at 254 nm) irradiation is determined. Full destruction of the pollutant is reached after 30 min irradiation in presence of Degussa P25. The performance of some of the catalysts is compared with literature data for their activity under 365 nm-illumination.      

UV-sensitized nanomaterial semiconductor catalytic reduction of Co<Superscript>III</Superscript>(N–N)<Subscript>3</Subscript><Superscript>3+</Superscript>/nm-TiO<Subscript>2</Subscript> and Co:TiO<Subscript>2</Subscript> formation: SEM-EDX and HRTEM analyses

Interfacial electron transfer induced by 254 nm light at nanomaterial (nm) titanium dioxide/Co^III(N–N)₃ ³⁺ interface in binary mixed solvent media such as water/methanol (or 1,4-dioxane) has been probed. The distinct photo reduction of cobalt(III) complexes, Co^III(N–N)₃ ³⁺; (N–N)=(NH₃)₂, en (1,2-diamino ethane), pn (1,2-diamino propane), tn (1,3-diamino propane), and bn (1,4-diamino butane), by excited nm-TiO₂ particles: Co^III + nm-TiO₂ + hν → TiO₂ (h⁺;e⁻) + Co^III → nm-TiO₂ (h) + Co^II is solvent controlled. The electron transfer from the conduction band of TiO₂ (e⁻, CB) onto the metal centre of the complex consists of (i) electron transport from CB into surface-adsorbed species A: Co^III(N–N)₃ ³⁺ (ii) solution phase species B: Co^III(N–N)₃ ³⁺ _(sol.), accumulated at the surface of the nanoparticle. In addition, UV irradiation of Co^III(N–N)₃ ³⁺ stimulates generation of \textCo_\textaq^\textII {\text{Co}}_{\text{aq}}^{\text{II}} ion, due to charge transfer transition, in solution phase. After UV irradiation, cobalt-implanted nm-TiO₂ separated as gray ultrafine particles, which were isolated. Photo efficiency of the formation of Co^II ion was estimated and the cobalt implanted nanomaterial crystals isolated from the photolyte solutions were subjected to SEM-EDX, X-ray mapping, and HRTEM-SAED analyses. Solvent medium was found to contribute in both the formation of Co^II ion and interstitial insertion of cobalt into the lattice of nm-TiO₂.     

Sol–gel preparation and characterization of Ag and Mg co-doped nano TiO<Subscript>2</Subscript>: efficient photocatalytic degradation of C.I. Acid Red 27

In this study, we successfully prepared pure, mono-doped, and Ag, Mg co-doped TiO₂ nanoparticles using the sol–gel method, with titanium tetraisopropoxide as the Ti source. The prepared samples were characterized by X-ray powder diffraction (XRD), specific surface area and porosity (BET and BJH) measurement, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, photoluminescence, and energy dispersive X-ray spectroscopy techniques. The XRD data showed that the prepared nanoparticles had the same crystals structures as the pure TiO₂. Also, DRS results indicated that the band gap of co-doped photocatalyst was smaller than that of the monometallic and undoped TiO₂ and that there was a shift in the absorption band towards the visible light region. Furthermore, the photocatalytic activity of the prepared catalysts was evaluated by the degradation of C.I. Acid Red 27 in aqueous solution under visible light irradiation. The results showed that Ag (0.08 mol%), Mg (0.2 mol%) co-doped TiO₂ had the highest photoactivity among all samples under visible light. It was concluded that co-doping of the Ag and Mg can significantly improve the photocatalytic activity of the prepared photocatalysts, due to the efficient inhibition of the recombination of photogenerated electron–hole pairs. The optimum calcination temperature and time were 450 °C and 3 h, respectively.     

Chitosan–sodium alginate encapsulated Co-doped ZrO<Subscript>2</Subscript>–MWCNTs nanocomposites for photocatalytic decolorization of organic dyes

Photocatalytic decolorization properties of cobalt doped-ZrO₂-multiwalled carbon nanotubes (Co–ZrO₂–MWCNTs) and chitosan–sodium alginate encapsulated Co–ZrO₂–MWCNTs (CS/Alg–Co–ZrO₂–MWCNTs) with varying weight percentage of Co–ZrO₂–MWCNTs are presented in this research paper. The Co–ZrO₂–MWCNTs was first synthesized through homogenous co-precipitation method and introduced into the chitosan–sodium sodium alginate (CS/Alg) biopolymer matrix. The bio-nanocomposites were characterized using X-ray powder diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, (UV–Vis)-spectroscopy and energy dispersive spectroscopy to obtain information on their structure, formation, morphology, size and elemental analysis. The photodecolorization efficiency of the samples was determined through their decolorization of trypan blue dye aqueous solution in 180 min. Recyclability of the catalysts was also assessed. The bio-nanocomposites experienced reduced band gap values with subsequent improvement in visible light activity compared to the uncapped Co–ZrO₂–MWCNTs. All the CS/Alg–Co–ZrO₂–MWCNTs exhibited higher photodecolorization activities than the uncapped Co–ZrO₂–MWCNTs. The most efficient catalyst (CS/Alg–40 % Co–ZrO₂–MWCNTs) with a band gap of 2.56 eV displayed 94 % decolorization efficiency of the dye. Though reusability of the catalyst is significant, its efficiency diminished consistently after each cycle.